1 support

The wooden shelf support has a packaging of 2,000 units, all made of resistant Zamak with a nickel-plated finish. This support has a semicircular base of Ø 14 mm and is also 12 mm wide. Its body has a height of 11.5 mm and to insert it into the board you need a Ø 10 mm drill, the bolt attached to it has a width of 8 mm with a diameter of 5 mm which requires a drill of Ø 8.5 mm to fit the vertical board and make the connection to the horizontal board.

Accessory designed to provide stability in the installation of shelving, ensuring a firm connection with the board.

Accessory designed to provide stability in the installation of shelving, ensuring a firm connection with the board.

Manufacturers: Manufactured in zamak with nickel-plated finish, its semi-circular base of Ø14 mm optimises panel fixing.

Distributors/Wholesalers: Available in packs of 2000 units, facilitating its commercialisation in the carpentry and furniture sector.

Carpenters: Installation by means of Ø10 mm drilling, with an integrated bolt that fits through a Ø8.5 mm hole in the board.

E-commerce & Retail: A product with a high turnover in online hardware and accessories shops, ideal for shelving assembly projects.

The main body is 12 mm wide by 15.5 mm high, while the attachment piece is 8 mm wide. These dimensions allow for a precise and secure fit in standard wood panel configurations.

The nickel-plated finish not only improves the aesthetics of the component, but also increases its resistance to corrosion and wear, making it a durable solution for demanding environments.

Thanks to its robustness and professional finish, it is ideal for kitchen, bathroom, office furniture or serial carpentry installations, where discreet and resistant solutions are required with a high volume of units per packaging (2,000 units).

The base of the bracket is semi-circular with a diameter of 14 mm, which provides a large contact surface that improves the load distribution and stability of the shelf.

The bracket needs a Ø 10 mm hole to insert the main body, and a second Ø 8.5 mm hole for the adjusting pin that secures the shelf in its horizontal position.