1 nut

The wide cap nut, Ø 20, is a fixing accessory for M8 screws which have a diameter of 8 mm. This nut has a head with a hat type eaves which measures Ø 20 mm, the body has a maximum length 18 mm, which is the same measurement that indicates the depth that the nut will reach in the board, this section of the piece is grooved, thus providing greater grip. At the end of it and in the opposite direction to the head, this piece has a width of 10.7 mm, likewise, it indicates a hole with a diameter of 10 mm. The packing of the wide cap nut is 1,000 units.

Fastening accessory designed to ensure secure anchoring in structures assembled with M8 screws.

Fastening accessory designed to ensure secure anchoring in structures assembled with M8 screws.

Manufacturers: Manufactured from high strength steel, its design incorporates an overmoulded Ø20 mm head to improve stability and load distribution.

Distributors/Wholesalers: Available in packs of 1000 units, optimising its commercialisation in furniture assembly projects.

Carpenters: Simple installation by drilling Ø10 mm, with a grooved body that facilitates gripping and fixing to boards of different thicknesses.

E-commerce & Retail: Product with great acceptance in online shops specialised in fasteners, ideal for structural applications in furniture.

For proper installation, a bore with a diameter of 20 mm is required, corresponding to the diameter of the nut's cap flange, which allows for proper fit and stability in the material.

The 20 mm diameter hat brim design provides a larger bearing surface, making assembly easier and offering a better grip. This improves the stability of the assembly and reduces the risk of movement or misalignment.

In addition to the insertion diameter, it is important to consider the body width (10.77 mm) and the body length (18 mm). These values determine the minimum housing depth and the appropriate board thickness.

The product is packaged in 1,000 units, ideal for mass production or industrial applications. The finish is zinc-plated, which improves resistance to oxidation and adds to the durability of the component.

This nut is designed for use with M8 threaded bolts, which have a diameter of 8 mm. The maximum depth of the nut body is 18 mm, which ensures a firm and secure fixing inside the board.