1 perno

The bolt at 20, is made of steel with anti-corrosion galve finish. In its design, a turning head of 9 mm long with a diameter for EU M6 nut, the body of the bolt has a length of 27 mm which is 20 mm if it is measured from the joint hole to the base of the head. The diameter of the body of the piece is Ø 7 mm. The fastening piece that is connected to the bolt must be Ø 14 mm. Likewise, the bolt must be installed with Ø 7.5 mm drill with a length of 20 mm from the edge and its packaging is 1,000 units.

Assembly component designed for high-strength joints in furniture and concealed fixing structures.

Assembly component designed for high-strength joints in furniture and concealed fixing structures.

Manufacturers:Made from turned steel with zinc plated finish, its design includes a 9mm long head and a EU M6 nut diameter, ensuring a firm connection.

Distributors/Wholesalers: Available in packs of 1000 units, optimising its marketing to furniture manufacturers and distributors.

Carpenters: Installation by means of a Ø7.5 mm drill, with a 27 mm long body and a 7 mm diameter, ensuring a precise fixing.

E-commerce & Retail: Product with excellent acceptance in online shops specialised in hardware, ideal for concealed mounting on quality furniture.

In order to know if a screw is compatible with a nut or stud bolt are compatible, we have to look at the internal thread of the screw and at the thread of the nut or stud bolt, which must coincide.For example, if we choose a nut or stud boy with a 6 metric screw thread (M6), the screw also has to have an internal metric thread of 6 (M6).

The bolt has a head of Ø9 mm and a body of Ø7 mm, which guarantees a secure anchorage inside the joint bore. This difference in diameters allows the bolt to be perfectly fixed without play, ensuring a solid and stable joint in the furniture.

This bolt has been designed to work with an EU M6 threaded nut, which means that any nut used with it must have an internal metric thread of 6 mm to ensure compatibility and correct fixing of the assembly.

For proper installation, a Ø7.5 mm drill hole and a minimum depth of 20 mm is required. This ensures that the bolt is correctly inserted into the board, maintaining the firmness and stability of the joint.

The bolt is made of steel and has a zinc-plated coating that effectively protects it against rust and corrosion, making it ideal for applications in environments where moisture or contact with chemicals may compromise the durability of the joining system.

Thanks to its robust design and corrosion-resistant finish, this bolt is ideal for in-line furniture assemblies with the System Ø14 coupling system. It is recommended for use in industrial joinery, assembly of kitchen units, cabinets or office furniture, where a solid and discreet internal fixing is required.