You are going to delete this cart. Are you sure?
We want to clear up the main technical doubts that may arise regarding the assembly of our products and the necessary steps required to assemble them.
The following video shows how the sliding door system for wardrobes is assembled.
In order to mount the sliders on doors it is possible to use different screw options, always bearing in mind the board thickness of the door:
- Euro screws. In this case it is necessary to machine a 5mm diameter hole into the door. For example, for a door thickness of 19 mm we will choose the code. 5044007 with a length of 17 mm.
- Self-tapping screws. They can have a 4mm diameter which do not require machining on the board. For example, for a board of 19 mm we will choose a 4 x 20 mm screw with the code. 8218605 or 5032405.
In order to secure the rails of the Space + sliding door system, it is recommendable to use 4 x 25 mm screws (code 5032505) for 16, 18 and 19 mm units.
For the assembly of Free Face profile hands for board of 19-20 mm alongside the Space+ sliding door system, it is necessary to choose an outside runner with a thickness of 30 mm and adhesive spacer cod. 4000820.
For the assembly of Free Face 2 profile hands for board of 19-20 mm alongside the Space+ sliding door system, it is necessary to choose an outside runner with a thickness of 23 mm.
The upper reinforced runner acts as a thread for the runners on the Space+ sliding door system. This profile offers greater resistance to torsion than the runner that is not reinforced, therefore it is ideal for large wardrobes with heavy doors that weigh up to 85 kg each.
For the assembly of Brenta or Adige handle profiles for 18 mm board along with the Space + sliding doors, it is necessary to choose an outside runner with a thickness of 23 mm.
You can not find the information you need? Raises your technical questions about our products and our technical department will solve.