You are going to delete this cart. Are you sure?
We want to clear up the main technical doubts that may arise regarding the assembly of our products and the necessary steps required to assemble them.
In order to know if a screw is compatible with a nut or stud bolt are compatible, we have to look at the internal thread of the screw and at the thread of the nut or stud bolt, which must coincide.
For example, if we choose a nut or stud boy with a 6 metric screw thread (M6), the screw also has to have an internal metric thread of 6 (M6).
M8 or M8x1 refers to the metric thread and thread pitch of a screw.
In the European market the 1.25 mm thread is common and it is named M8.
On the contrary, when dealing with a fine 1 mm screw thread, M8X1 is used.
In the Italian market a different name is used, 8MA for M8 and 8MB for M8X1.
Stands for the Alfa shelf are semi-hidden systems that are very discreet for fastening shelves using wedge assembly. Ideal for furniture with racks of Ø3mm or Ø5mm.
In order to assemble it, it is necessary to have a Normal 360 hook and an Alfa Alfa Foro or Alfa Speed support. Remember to ask for 4 unites of hooks and supports per stand.
The choice of the Normal 360 hook is made depending on the thickness of the shelf.
The choice of the Alfa supports also depends on the thickness of the shelf and also on the rack on the side:
- For a rack of Ø3, you will use the Alfa Foro support. For installation on Ø3 drill racks, which are more discreet and have less visual impact than Ø5mm drill racks. Always remember to ask with the Alfa screw code 401290.
- For drill racks of Ø5, you will use the Alfa Speed support. For installation on the side using pressure, it can be disassembled easily by hand without damaging the sides of the furniture.
The joining systems for furniture found in our catalogue are organised in this list according to their strength, from strongest to least strong:
In the following summary table, you can find the technical and functional characteristics of the joining systems for Emuca furniture:
Yes, this bracket makes it possible to block the shelf in order to turn the furniture with the shelf assembled, without falling, which facilitates transport. Likewise, the shelf can be assembled and disassembled easily without the need for tools, thanks to a manual closing plate that frees the steel pivot.
The Sekure bracket can be assembled and disassembled easily without the need for tools, thanks to a manual closing plate that frees the steel pivot.
This pivot is put into the bracket, with the short 7.5 mm part remaining within the bracket and the longer 10 mm part is put into the side of the furniture.
The plate of the bracket slides, makes it possible to lock the pivot in order to turn the furniture with the shelf assembled, without falling, which facilitates transport.
The following video shows how you can easily install a Holdy hanger.
You can not find the information you need? Raises your technical questions about our products and our technical department will solve.