Back to top
Loading…
emuca - vida en los muebles

You are going to delete this cart. Are you sure?

Accessing the private area Emuca - Vida en los muebles

Technical Forum

We want to clear up the main technical doubts that may arise regarding the assembly of our products and the necessary steps required to assemble them.

Kitchen accessories

The following video shows how you can easily assemble a Recycle extractable waste container for doors.

Yes, the Recycle container be assembled on either a right or left-hand side door.

You simply have to follow the assembly instructions, along with the assembly template.

The following video shows how you can easily assemble the Inox plate racks.

The following video shows how you can easily assemble the oven grille.

The following video shows how you can easily assemble the microwave frame.

Yes, for the assembly of the rectangular under sink insert it is necessary to make a 90º angle straight machining cut, although it is recommended to make a machining cut with a radius of 20 mm.

The following video shows how you can easily assemble the abovementioned storage system in a kitchen.

Sut blinds can be adapted to different heights with a maximum height of 1500 mm. To do that, you simple need to cut the side rails and not fully unroll the blind. You need to bear in mind that the minimum gap for housing the blind box is 175 mm.
However, the width of the Sut blind cannot be modified or cut, as this affects the pulling in mechanism of the blind.

The RAL code of the white finish of the Optima cutlery holder is approximately 9003.

The RAL code of the grey finish of the Optima cutlery holder is approximately 7001.

The RAL code of the anthracite grey finish of the Optima cutlery holder is approximately 7043.

 

It is necessary to bear in mind that the models manufactured via injection (unit 400, 450, 500 and 600) are not exactly the same as those manufactured using thermoforming (unit 300, 350, 700, 800, 900, 1,000 and 1,200) although they are very similar.

The Optima cutlery holder has a wide range of models and sizes. The cutlery holder intended for the Vantage-Q drawer is not compatible with the Slim drawer. as a a cutlery holder model exists for the Slim drawer.

Both models have the same depth but not the same width, specifically, the cutlery holders for the Slim drawer are 6 mm narrower than the cutlery holders for the Vantage-Q drawer.

The following video shows how you can easily assemble the abovementioned storage system in a kitchen.

We have an anti-slip mat that is supplied in rolls that are easy to cut to any inside measurement of the drawer. This mat has two roles:

It prevents objects moving inside the drawer when it is opened or closed.

It prevents the bottom of the drawer being damaged with a graze or little knock when handling objects stored in the drawer.

We have protectors designed for assembly in kitchen floor units and in sink floor units.

They are produced using natural textured aluminium with a plastic strip around the border that protects the unit from small leaks or from cleaning products.

These protections are sized for 16 mm board, for special measurements consult the conditions.

Bottom mounting and automatic extraction systems need to be larger than the width of the container. This is due to the fact that the attaching mechanism needs to occupy a larger space than the width of the container.
However, you can always reduce the minimum size of the module and make it function with manual opening.

What is the minimum module size for installing bottom mounting containers with automatic extraction?

In order to assemble the plastic base for the fridge, such as the Fridge Base, it is necessary to have the kitchen Bone feet as well as the number 10 metric screw thread (M10) from the same family, as the base as four holes for fastening the feet.

The Fridge Base is also perforated for ventilation and designed for fridges to be integrated into 600 mm wide units with tufts for assembly.

Technical questions box

You can not find the information you need? Raises your technical questions about our products and our technical department will solve.