You are going to delete this cart. Are you sure?
We want to clear up the main technical doubts that may arise regarding the assembly of our products and the necessary steps required to assemble them.
The following video shows how you can easily assemble the Sling wardrobe lifts.
The gap that there is between the side of the unit and the frame /guide rails of the accessories for inside wardrobes or Moka dresser is 9 mm.
Yes, you simply need to respect the minimum installation depth of the Moka runners and carry out the assembly with the clips that are supplied.
The side supplement of the Hang fold-down hanger is used to increase the distance between the hanger and the side of the unit, avoiding the arms of the hinges. Thanks to this supplement, you will be able to mount the Hang hanger fully integrated into your wardrobe with hinged doors.
The following video shows how you can easily assemble the lateral pull-out tie rack Moka.
The following video shows how you can easily assemble the pull-out hanging rail Moka.
The following video shows how you can easily assemble the pull-out mirror Moka.
The Moka mirror is assembled on the side of a unit and needs a minimum width of 225 mm in order for the mirror to be extractable and rotating.
The following video shows how you can easily assemble the extractable trouser holder Moka.
Yes, the Moka trouser holder is available in two models, for assembly on either the right hand side or left hand side of the wardrobe, and to that end there are different codes. This completes the range of furnishing and storage options for your wardrobe or dressing room.
The following video shows how you can easily assemble the extractable shoe rack Moka.
The RAL of the finish of the accessories for inside Moka wardrobes and dressing rooms is approximately 8019.
Yes, it is only necessary to cut the cross profiles of the Keeper frame with a straight cut. In this manner you can attain an inside width of the unit less than 555 mm.
Afterwards, it will be necessary to bear in mind the new measurement of the frame in order to add the different accessories such as baskets, drawers and trouser racks.
Yes, the Self trouser holder stands out for its ease of installation and because it can change sides easily. In order to change the position of the trouser holder it is only necessary to unscrew the central body and separate it from the runners in order to change side, and unscrew the cylindrical handle and put it on the other side.
This trouser rail incorporates 37 mm full-extension ball bearing runners with a gentle sliding movement and a handle for pulling out of the furniture. Also, it has eleven chrome steel bars with non-slip rubbers for hanging trousers on.
The shelf support for a gap slot of 32 mm has two through holes, which enable access through a screw and a manual tool. This makes it possible to fasten the board if that is required, especially in assemblies with very wide continuous shelves.
The choice of the door opening system is a key point in the design of a wardrobe, and it is necessary to take into account factors such as: functionality, ease and continuity of use, making the most of space, as well as the appearance. At Emuca, we offer technical solutions for the furniture industry.
The main opening systems on wardrobes:
- Wardrobe with hinge door. See family 1.
This is the most common and classic system. Its hinge system makes it possible to open panels of different sizes and with different opening angles (up to 180º) and opening is quick and simple, although it is the system that takes up most space. If you do not have a large space, this may not be your best system. However, if your wardrobe is going to have very regular use, over time hinge doors are a lot more convenient than other systems.
- Wardrobe with sliding opening. See family 7.
They are suitable for large pieces of furniture as well as small ones and where you do not want disturbance when opening the doors. Half of the piece of furniture is always closed, but this is an ideal system for small spaces. Within this system there are inner sliding doors (within the structure itself of the furniture) and outer ones (completely hiding the wardrobe), and it can be installed built-in to the wall or free from it. In any case, our sliding doors have guide rails consisting of two rails with wheels.
Generally, in our catalogue there are two forms of sale for profiling items:
Package sales: For that reason we have profiles cut to the specific measure (for example 3m) and packaged in the quantity outlined in the catalogue (for example 24m packaging). They are for immediate delivery as we have stock and they can be managed through our B2B.
Made to measure sales: For this purpose we have profiles in industrial packaging (for example m packaging) and in this way, our clients can request profiles made to a specific measure. The maximum cut measurement that can be requested is the length of the bar indicated with L (for example 3m).
This sales method implicitly involves extra management, opening codes, for opening codes, handling, cutting and packaging, as well as an extra delivery period from the order date.
These products can be requested through our B2B, although the assessment of the order (final price) is outstanding until the Customer Service Area gets in touch with the client in order to define the exact measurement, the quantity of profiles requested and the delivery period.
When you assemble a wardrobe with a system of sliding doors it is necessary to mount handle profiles for opening and closing. In the Emuca catalogue there are different models created from aluminium and steel.
Depending on the sliding door system chosen, you can use certain handle profiles or other depending on their geometry. In the following table you can find the compatibility that exists between different sliding door systems and handle profiles.
ü Compatible and ideal.
- Compatible but not ideal.
x Not compatible.
The following video shows how the sliding door system for wardrobes is assembled.
According to the number of doors that comprise your wardrobe you can choose between different types of Free aluminium vertical profiles (A, B or C) to obtain different combinations of doors.
They can be removed or concealed in different ways depending on the type of stains.
Small black graze marks can be eliminated by simply rubbing them with a rubber used to rub out pencil.
With small shiny lines, you simply need to rub the area with a scouring pad (scotch-brite type) soaked in methylated spirits.
For small white circular marks, you can rub with the area with a scouring pad or cloth with Vaseline or some greasy substance.
The double-sided adhesive table, Code. 6000215 is white acrylic foam tape that is 33x19mm with a thickness of 0.64mm. This tape has an acrylic adhesive that offers excellent adhesion to several finishes and plasticized vinyl. Likewise, it is resistant to solvents, extreme temperatures and UV rays, therefore it is recommended for several uses inside and outside.
In the attached document, you can see details of the technical characteristics of the double-side adhesive tape, code. 6000215.
The following sketch shows details of the machining that should be carried out on aluminium doors for the Aluroller 2 sliding system.
You can not find the information you need? Raises your technical questions about our products and our technical department will solve.