1 transmitter, 1 metal base with adhesive fixing

The Emuca RF emitter with a Smart wireless LED switch/dimmer sensor is a proximity switch that turns the LED luminaire on or off when a hand passes within its 5 cm detection range, without physical contact. Its dimmer function allows brightness to be increased or decreased by holding the hand near the sensor for a short duration. This device operates via radio frequency and features a rechargeable lithium battery, eliminating the need to replace disposable batteries.

The device functions as a transmitter, sending a radio frequency signal to the Smart RF receiver (sold separately), which can be concealed up to 8 metres away. Each RF door emitter can be paired with up to 10 receivers, and each receiver can receive signals from up to 10 emitters, offering maximum flexibility for multi-point lighting setups.

Pairing between emitter and receiver is quick thanks to the integrated buttons, and can be reset by pressing for 10 seconds. It also features a learning button that allows emitters to be linked together without accessing the receiver — ideal for completed or hard-to-reach installations.

The 500 mAh battery is rechargeable via USB-C using a standard 5 V DC charger. A full charge takes approximately 3 hours with a 5V 2A charger. One full charge provides autonomy for up to 700 on/off cycles or up to 18 months in stand-by mode when switched off using the integrated ON/OFF button (recommended for long periods of inactivity). The battery has an estimated lifespan of 500 full charge cycles.

Made from black plastic, it is compatible with Smart converters and 12V DC or 24V DC LED luminaires. For easy installation, it includes an adhesive metal base with integrated magnets, allowing the emitter to be easily fixed and removed for charging, repositioning or remote activation.

Control lighting effortlessly with the wireless Smart LED proximity touch/dimmer sensor, which switches the light on or off and adjusts brightness with a simple gesture — no contact required. Its radio frequency operation and rechargeable lithium battery make it ideal for cable-free, battery-free installations.

For manufacturers, this system offers an efficient and modern solution for furniture with integrated lighting. With 5 cm proximity detection, it enables switch-free designs, while gesture-based dimming control adds value without increasing costs. Compatible with up to 10 RF receivers, it ensures maximum flexibility for serial production projects.

Wholesalers and distributors will appreciate its versatility and logistics-friendly design. Its quick pairing in just 10 seconds, connection to multiple receivers, and adhesive magnetic metal base make it ideal for demos, deliveries, and replacements. Plus, USB-C fast charging in only 25 minutes enhances the user experience.

For carpenters and local retailers, this product provides an easy way to integrate advanced technology without complicating installation. With a stand-by mode of up to 18 months and integrated on/off and learning buttons, it’s ideal for custom projects where time and simplicity matter.

In e-commerce and retail, its contactless operation and compatibility with 12V or 24V DC LED luminaires make it especially appealing for online marketplaces. Its modern look, intuitive use and premium packaging make it a high-conversion product for digital sales channels.

The RF transmitter has a proximity sensor that works like a wireless switch that detects hand movement without direct contact. This allows you to turn the LED light on, off or adjust its intensity. It works wirelessly by sending a radio frequency signal to the Smart RF receiver (not included).

The transmitter has a 500 mAh battery that is recharged via USB-C, using a standard 5V DC charger. The full charging time is approximately 25 minutes with a 5V 2A charger. A full charge provides up to 700 on/off cycles, or up to 18 months in standby mode if the transmitter is turned off using the integrated ON/OFF switch (recommended for prolonged periods of inactivity). The battery has a service life of approximately 500 full charge cycles.

The sensor has a detection range of 5 cm, allowing the LED light to be controlled without touching the device, offering convenience and practicality in use.

Yes, it is possible to pair up to 10 receivers with one RF transmitter or link up to 10 transmitters to the same receiver. This allows several lights to be managed from a single transmitter or different transmitters depending on the needs of the space.

Installation is simple and can be done using double-sided adhesive tape or screws, both included in the package. This makes it easy to attach to furniture, walls or other surfaces.