1 support

The lower supports of the Strong fastening system are a very resistant piece of steel that together with the hanger and the Strong plate you can place a drawer without any problem at any distance from the floor. These have dimensions of 175 mm in total height by 82 mm in width at their largest base that will support the furniture. In the area that is fixed on the wall, its width is 43.5 mm. The holes through which the fixing screws must pass are 8.2 mm in diameter and there are three. This piece has a height and level adjustment system, its finish is zinc plated and it is offered in packaging of 25 units.

Bottom bracket for Strong 32 mm suspended base units (SKU: 43473)

.

Fixing element complementary to the Strong hanger, designed to reinforce and level suspended drawers at different heights.

Manufacturers: Manufactured in zinc plated steel, its structure of 175 x 82 mm guarantees stability during assembly.

Distributors/Wholesalers: Available in packs of 25 units, optimising distribution in large volumes.

Carpenters: Installation by means of three Ø8.2 mm screws in a 43.5 mm wide fixing base, ensuring a firm support.

E-commerce & Retail: Product with great acceptance in marketplaces specialised in furniture fastening and levelling systems.

The following video shows how you can easily install a Strong hanger.

The bottom Strong 32 mm bracket is designed to offer greater adjustment of the position of the unit horizontally and vertically. However, for this unit bracket, it is necessary to have the back part at a minimum distance of 32 mm in relation to the fastening wall. The bottom Strong 3 mm bracket has less adjustment and the back part has to be kept a minimum distance of 3 mm from the fastening wall.

The Strong 32 mm bracket provides advanced adjustment of the module position in all three directions (height, depth and side), which is ideal for demanding assemblies where perfect alignment of the cabinet to the wall is required.

To install the Strong 32 mm bracket, the cabinet must have a minimum distance of 32 mm from the wall. This allows the bracket and hanger to work together without interference.

Fixing the Strong 32 mm bracket requires screws with a diameter of 8.2 mm. It has three fixing holes to ensure a secure hold even in heavy applications.

This bracket is made of steel with a zinc-plated finish, which gives it high mechanical strength and corrosion protection, ideal for demanding environments such as kitchens or bathrooms.

The bracket is supplied in boxes of 25 units, allowing efficient installation in industrial or mass production environments, with precise control over available stock.