Vertex 40kg External drawer height 178mm with Push Sincro2, depth 450mm, Steel, White painted

3202012 / 8432393301273
Essential products
DepthPackagingFinishingSKU
3501 KIT
White painted
3203812
4501 KIT
White painted
3202012
4001 KIT
White painted
3203912
5001 KIT
White painted
3204112
3501 KIT
Anthracite grey
3203835
4001 KIT
Anthracite grey
3203935
5001 KIT
Anthracite grey
3204135

Product features

  • Hardware kit necessary for the assembly of a Push Sincro drawer of height 178 mm and depth 450 mm, except for the border, back and bottom.
  • Synchronized total extraction guides.
  • Load capacity of 40 kg.
  • The guides are adapted for mounting the synchronizer rod (not included in the kit).
  • Made of white painted steel.

The Vertex Push Sincro drawer is available in kit format with all the necessary hardware for assembly, ideal for any area of your home, kitchen, bathroom, office.

This drawer has slides that provide smooth and silent sliding with an ejection system when the drawer is pressed, designed to provide functionality and simplify handle-less drawer fronts.

Vertex Push Sincro slides are adapted for mounting the synchronizer rod (not included in the kit), which is recommended for mounting drawers wider than 600 mm.

It also stands out for its high load capacity, which can support up to 40 kg per drawer. It includes full-extension Push Sicro slides, set of hooks and ribs available in white or anthracite gray painted finish. In addition, the drawer is available in different rib heights: 93, 131 and 178 mm with various drawer depths.

To assemble the drawer, you will only need the boards cut to the correct dimensions for the bottom, back and border of the drawer. Adjustment is made by eccentric adjustment of the front panel: ±2 mm vertically and ±1 mm horizontally.

Components

1 pair of runners, 1 set of sides, 1 set of hooks for frontal drawer, screws

Documentation

PackagingFinishingSKU
10 UnitNatural aluminium3202261

FAQ


Yes, without any problem. However, if the drawers are wider than 600 mm, and in order to guarantee a correct opening of the drawer when pressing on any point of the front of the drawer, it is recommended to mount it.

The rod is supplied with a length valid for modules of 1200 mm, with a side thickness of 16 mm, and can be cut to the size required for our assembly.

No, the minimum installation depth is the same. Drawer depth + 5 mm