Frequently asked questions
The following video shows how you can easily assemble the Lokbox mechanism.
The 165° opening allows the door to be fully recessed into the cabinet frame, providing greater accessibility to the cabinet interior. This is especially useful in kitchen, bathroom or storage furniture where a wide opening is required.
The damping piston ensures a smooth and controlled closing, reducing impacts and prolonging the life of the hinge and the furniture. It also improves the user experience by avoiding annoying noises when closing the door.
This hinge is ideal for furniture where full access to the interior is needed, such as corner cabinets, kitchen furniture or storage with large compartments. Its design allows smooth and precise movement, even on large or heavy doors.
The automatic clip system makes it easy to attach the hinge to the supplement without the need for additional tools. This system simplifies installation and ensures a stable and secure fixing, reducing the time and effort required for assembly.
The hinge is made of high quality steel with nickel-plated or titanium finish, providing resistance to corrosion and wear. These materials guarantee a long service life even in heavy use environments such as kitchens or bathrooms.
Yes, for the assembly of the rectangular under sink insert it is necessary to make a 90º angle straight machining cut, although it is recommended to make a machining cut with a radius of 20 mm.
The following video shows how you can easily assemble the Ultrabox drawer.
The RAL code of the white finish of the sides of the Ultrabox kitchen drawer is approximately 9001.The RAL code of the aluminium finish of the sides of the Ultrabox kitchen drawer is approximately 9022.
Yes, the drawer measurements, including its dimensions and machining, are fully compatible.This allows customers to mount the Silver partial pull-out slides with push to open function and the Silver soft-close partial pull-out slides on the same drawer.However, they are not compatible with the Slippe partial pull-out slides with push to open function.
The locking pivots that are mounted on the Silver guide rails are designed in order to easily fasten the drawers to the guide rails, thus preventing them from falling during transportation or handling.These pivots avoid the use of additional screws and for their assembly you only need a small hole in the side of the drawer. In this manner the drawer can be assembled and disassembled as many times as you wish.
The X91R straight hinge is compatible with door thicknesses between 16 and 22 mm, ensuring smooth and secure closing in furniture applications with these thicknesses.
It offers adjustments in three dimensions: height, depth and lateral alignment, allowing precise installation, correcting misalignments and optimising the aesthetics of the furniture.
Yes, it is necessary to use specific shims. The X91 and X92 shims are fully compatible with this hinge and are recommended for optimal mounting.
The Ø35 mm cup is fixed by means of screws, offering stability and resistance over time, as well as maximising contact with the surface of the furniture for a secure fit.
The damped closing of this hinge reduces the impact when closing, preventing noise and prolonging the life of the doors, unlike a non-damped closing that does not control the closing speed.
There is a blocking pin that is designed in order to be able to fasten the drawers to the hidden Slippe rails simply and affordably, thus avoiding them from falling during transport or handling. There are also two different models, one for total extraction rails and another longer model for partial extraction rails.With this pivot, you avoid the use of additional screws, and in order to assemble it you only need a small hole in the side wall of the drawer. In this manner the drawer can be assembled and disassembled as many times as you want.
It is enough to use a single locking pin in order to fasten a drawer to the hidden Slippe rails. For assembly, you only require a small hole in the side of the drawer rack as indication in the catalogue´s machining diagrams. In this manner the drawer can be assembled and disassembled as many times as you want.
The following video shows how you can easily assemble a drawer with soft- closing and T30 drop runners.
The RAL code of the white finish of the rails for T30 drawers is approximately 9001. The RAL code of the black finish of the rails for T30 drawers is approximately 9005. The RAL code of the grey finish of the rails for T30 drawers is approximately 9022
The full-extension slides support a maximum load of 40 kg, ensuring smooth sliding and soft closing.
The panels have a depth of 399 x 450 mm and a back panel of 376 x 63 mm. Yes, they can be trimmed to fit different module widths.
The side ribs allow adjustments of +2 mm vertically and +1 mm horizontally, achieving a perfect alignment of the drawer front.
This kit is available in white and anthracite grey painted finishes, with an elegant and functional design.
The boards are made of particle board and durable melamine, offering durability and protection against moisture.
It is recommended to mount 2 soft-close devices per each Padplast drawer with the corresponding actuator, one on the right and another on the left of the drawer although they do not have sides.
Yes, the soft closing for the Padplast office drawer is compatible with the 27 mm high Paddock guide rails with partial extraction and the 35 mm high Paddock guide rails with total extraction, aside from the 45 mm high Paddock guide tails with total extraction because it already has soft closing.Also, the soft closing for the Padplast office drawer is not compatible with the anti-overturn Paddock lock.
This front attachment kit is compatible with 105 mm high front panels.
Installation is carried out by attaching the hooks to the sides of the panel with screws, ensuring a secure and stable fastening.
The high quality plastic ensures excellent strength, durability against daily use and ease of cleaning, while maintaining a like-new appearance over time.
No additional tools are required, as assembly is simple using the included screws.
This system is characterised by its high resistance, even under intensive use, and offers optimum stability in the assembly of the drawer front panel.
The Silver concealed partial-extension slides can carry a maximum load of 25 kg.
They include a soft closing system that uses a shock absorbing piston, which guarantees a silent and fluid closing of the drawer, avoiding abrupt shocks.
They offer a vertical adjustment of ±5 mm, which facilitates the precise adjustment of the drawer position in the cabinet.
The rollers are made of delrin, a high quality material that ensures smooth running and precise guidance in both horizontal and vertical directions.
Silver concealed slides are available in depths of 240 mm, 290 mm, 340 mm, 390 mm, 440 mm, 540 mm, 640 mm and 690 mm.
These slides are compatible with drawer depths of 240 mm, 290 mm, 340 mm, 390 mm, 440 mm and 490 mm, depending on the model selected.
The push system allows the drawer to eject automatically when pressure is applied to the front of the drawer, eliminating the need for handles.
These guides offer a vertical adjustment range of ±5 mm for precise adjustment.
The locking pivot ensures that the drawer does not unintentionally dismount from the slide and maintains its stability.
These slides have a maximum load capacity of 25 kg.
The trim plate is designed to cover the access to the drawer front attachment and adjustment system, improving both aesthetics and functionality.
Yes, the cover plate is suitable for mounting on both the left and right side of the drawer.
It is made of plastic, which guarantees lightness, durability and a clean, uniform finish.
The cover plate covers the access to the coupling and regulation system, protecting and concealing it for a more aesthetic and functional design.
It is available in three finishes: white, grey and anthracite grey, which can be aesthetically integrated with different drawer designs.
The sides of the drawer are made of transparent tempered glass with a thickness of 6 mm, which ensures strength and aesthetics.
The full-extension slides have a maximum load capacity of 40 kg, suitable for intensive use in kitchens.
The eccentric of the drawer front allows an adjustment range of ±2 mm vertically and ±1 mm horizontally, ensuring precise installation.
The kit includes synchronised full-extension slides, a set of glass-sided ribs, a set of cover caps and a set of front hooks for the outer drawer.
This model is available in anthracite grey finish, providing an elegant and modern design for kitchen furniture.
The tempered glass used on the sides of the Vertex drawer is 6 mm thick, ensuring impact resistance and a modern aesthetic design.
The Vertex drawer slides with glass sides have a maximum load capacity of 40 kg, ideal for intensive use.
The eccentric adjustment of the front panel allows adjustments of ±2 mm vertically and ±1 mm horizontally, ensuring precise alignment of the drawer.
The ribs are made of high quality painted aluminium, while the slides are made of steel with a synchronised full-extension system and damped locking.
The boards used for the back and rear panels must be 16 mm thick to ensure correct and stable assembly.
The Vertex drawer with 178 mm high glass sides has a depth of 450 mm, offering large storage capacity.
The glass used is 6 mm thick, transparent and tempered, providing impact resistance and a sleek, modern design.
The drawer front includes an eccentric adjustment system with an adjustment range of ±2 mm vertically and ±1 mm horizontally to ensure perfect alignment.
The ribs are made of painted aluminium, while the guides are made of steel with full synchronised extraction and cushioned locking for smooth and durable operation.
This drawer has a maximum load capacity of 40 kg, ideal for supporting heavy utensils and objects in the kitchen or other spaces.
The plate holder can store up to 11 plates, optimising the available storage space by means of adjustable dividers that adapt to the size and shape of the plates.
Its dimensions are 120x470 mm, allowing it to fit most standard kitchen drawer sizes, ensuring a proper fit.
It is made of aluminium and ABS plastic, offering a combination of lightness, resistance to daily use and an elegant anthracite grey finish that stands out in modern designs.
Adjustable dividers hold dishes securely in place according to size and shape, preventing them from sliding, bumping or breaking during storage in the drawer.
This dish rack is ideal for kitchen drawers for organised and safe storage of dishes, especially in modern spaces that seek to combine functionality with design.
The breakfast bowl holder can hold up to 8 breakfast bowls, optimising the available storage space thanks to its adjustable dividers that organise the bowls efficiently.
The dimensions of the holder are 90x470 mm, which makes it compatible with most standard sizes of kitchen drawers.
It is made of aluminium and ABS plastic, materials that provide lightness, resistance to daily use and an elegant finish in anthracite grey.
Adjustable dividers adapt to the size and shape of the bags, securing them firmly to prevent them from slipping or breaking during storage.
This bowl holder offers a functional and modern design, optimising space and guaranteeing the safety of bowls, ideal for keeping kitchen drawers organised in a practical and aesthetically pleasing way.
The plate rack can store plates stacked on its columns, which optimises the available storage space in the kitchen drawers efficiently and safely.
Its dimensions are 159x468 mm, making it compatible with most standard kitchen drawer sizes.
It is made of aluminium and ABS plastic, materials that offer lightness, resistance to daily use and a modern design with an anthracite grey finish.
Adjustable columns and dividers allow you to organise plates according to size and shape, keeping them steady to prevent slipping or breaking while in storage.
This vertical plate rack offers more compact organisation and saves drawer space by storing plates in a stacked manner, improving accessibility and safety compared to horizontal options.
The tray adjustment system is sliding and can be adapted to the length of the cutlery inside the drawer, and can be installed directly and without the need for tools.
Phenolic laminate provides water resistance, anti-bacterial properties and durability against wear and tear, making it ideal for kitchen environments exposed to moisture.
Yes, the organiser is compatible with drawers of different depths as long as they respect the minimum dimensions of 100x470 mm.
The organiser is designed to withstand high humidity conditions thanks to the phenolic laminate, which protects it from deformation and corrosion and prolongs its life.
It does not include a specific anti-slip mechanism, but its design adjusted to the dimensions of the drawer ensures that it remains fixed during use.
The adjustable tray can be adapted to different cutlery lengths, maximising the space available and keeping cutlery organised.
Phenolic laminate offers high water resistance, anti-bacterial properties and corrosion protection, ideal for extended life in kitchen conditions.
The organiser is only compatible with drawers having a minimum length of 470 mm, ensuring a proper fit to its dimensions.
Stability is ensured by the design of the organiser to fit the internal dimensions of the drawer, eliminating movement during normal use.
Yes, the design with adjustable tray and dedicated dividers keeps cutlery accessible and organised, preventing slippage thanks to the firm structure.
The following video shows how you can easily install a Holdy hanger.
The adjustable tray can be repositioned within the organiser to ensure that the spice jars are held securely in place and at the optimum inclination for use.
The organiser holds up to 6 spice jars, keeping them safe and organised.
The slope of the organiser ensures that the jars are easily visible and accessible, allowing for quick and effortless grabbing.
Phenolic laminate offers water resistance, anti-bacterial properties and corrosion durability, ideal for use in kitchen environments.
The dimensions of the organiser (150x470mm) make it compatible with most standard kitchen drawer sizes.
It is made of steel and phenolic laminate, which offers water resistance, anti-bacterial properties and durability against corrosion.
Yes, its design allows it to be easily placed inside the drawer without the need for additional tools, adapting to standard dimensions.
Knives of various lengths can be used thanks to its adjustable tray, ensuring that it can be used with a wide variety of utensils.
The knives are held securely in place by adjustable spacers that prevent movement or slipping during use of the drawer.
It is compatible with full and partial extraction systems, maximising its functionality in different types of drawers.
This plate is compatible with the drawers of the Vertex, Concept and Convex ranges.
Installation is simple, as the plate is fitted to the side of the drawer by means of a clip located in the lower area, ensuring a firm and quick fixing.
Yes, the front of the plate can be screen-printed with a customised logo or design according to the customer's needs.
The plate is made of polypropylene with a finish available in various colours, such as white, grey and anthracite grey.
Yes, the plate can be installed on the left or right side of the drawer, as required.
The LED Lynx strip with a variable colour temperature has a controller that makes it possible to select a colour temperature of cool white, natural white or warm white, in a range between 3,000 Kelvin and 6,000 Kelvin.
The choice of a system for Agile lifting doors depends on the height and the weight of the furniture door. To do so, you simply need to follow these simple steps:
1. Check the height and weight of the furniture door.
2. Once you have obtained the values you need to calculate the strength of the spring, S = H * (W + 2 * Wh), in terms of: H = Height of the door in mm. W = Weight of the door in kg. Wh = Weight of the handle in kg. You can choose the lifting system according to what interval the strength of spring S falls under. The LOW interval is between 580 and 1,250, MEDIUM between 960 and 2,040, HIGH between 1,800 and 3,500, and EXTRA HIGH 3,200 y 9,000.
For example, we have a door with a height of 400 mm and a weight of 5 kg, with a handle that weighs 0.22 kg. The strength of the spring would be S = 400 * (5 + 2 * 0.22) = 2,176. Therefore, we would choose the HIGH strength range because it is in the interval of 1,800 to 3,500.
The following video shows how you can easily assemble the Agile system.
The sensor detects motion within a range of 90° and up to 2.5 metres. The timer switches the luminaires off after 60 seconds without motion detection and restarts when motion is detected again.
This sensor can be connected to a Smart converter to manage several luminaires simultaneously with a single sensor. It is compatible with 12V DC or 24V DC luminaires, supporting a maximum power of 36W for 12V DC and 72W for 24V DC.
The sensor requires machining with a diameter of 12 mm to be integrated into the furniture. It is fixed by means of a mounting accessory and screws included.
It includes a 1.5 m cable with Miniled connection and an additional 1 m for the lens. This facilitates integration into Miniled systems for quick and easy installation.
Ideal for passageways, dressing rooms, wardrobes, hallways and stairwells in homes or commercial facilities, providing comfort and energy efficiency through automatic switching on and off.
The Style 10 handle has the following dimensions: 42 mm wide, 28 mm high and a length of 2.35 metres. It is made of matt anodised aluminium, which gives it lightness, strength and a highly durable aesthetic finish.
This model is specifically designed for 10 mm thick sliding doors. It is compatible with built-in or sliding wardrobe systems using similar profiles.
Installation requires basic tools such as an aluminium cut-off saw (in case of length adjustments), a drill for fastening, and a screwdriver or equivalent tool for assembly with appropriate hardware. Be sure to follow the instructions for the Placard sliding system for precise adjustment.
Yes, the handle can be cut to size using specialised aluminium tools, such as thin-cutting saws. Careful cutting is recommended to keep the edges smooth and to avoid damage to the anodised finish. Be sure to measure accurately before fitting.
The RAL of the white gloss finish on the rails and handles of the Placard sliding door system is approximately 9003. The RAL of the anthracite grey finish is approximately 7043. The RAL of the black finish is approximately 9011.
The Placard HK16/18 crossbar provides rigidity and stability to the sliding wardrobe, preventing deformation in daily use. In addition, it serves as a reinforcement to support the weight of the doors and ensures smooth operation in sliding door systems.
It is available in white painted, black painted and matte anodised finishes, with lengths of 1.15 m and 2.35 m. These options allow it to be customised according to the design and configuration of the furniture.
The crossbar is specifically designed for 16 mm and 18 mm boards. During installation, it is important to check the thickness of the doors and adjust the fixing screws according to the grooves in the profile to ensure a firm and aligned joint.
Manufactured from high quality aluminium, the HK16/18 Placard crossbar is corrosion and wear resistant. Its robust design and available finishes ensure long-lasting performance even in heavy-duty environments.
To preserve its appearance and functionality, clean regularly with a soft cloth and soapy water, avoiding abrasives or corrosive chemicals that may damage the painted or anodised finish. Periodically inspect the fixing points to ensure that the crossbar is correctly adjusted.
The Quad 18 handle is designed for 18 mm thick boards, which ensures a precise and stable fit. It is recommended to check the board measurements prior to installation to ensure compatibility.
The Quad 18 handle has a length of 2.35 m and is made of aluminium with a matt anodised finish. This design combines durability with modern aesthetics, ideal for sliding door systems.
Installation is carried out by machining the top of the panel. It is fixed using standard tools and specific screws, ensuring a perfect fit in the corresponding guide system.
The matt anodised finish provides corrosion and wear resistance, as well as a uniform and elegant appearance. This makes it suitable for residential and industrial environments with frequent use.
To prolong the life of the handle, clean it with a soft cloth and neutral soapy water, avoiding abrasive products or tools that may scratch the anodised finish. Periodically inspect the fixing points to ensure that the handle remains secure and functional.
This track is specifically designed for Placard sliding wardrobe door systems, compatible with panels of different thicknesses and systems that require precise and smooth bottom guidance.
The rail is available in lengths of 2.35 m and 3.9 m, with white painted and matt anodised finishes.
Installation is carried out by fixing the track to the floor or cabinet base using screws or adhesives according to the system specifications. Correct levelling of the rail is essential to ensure optimum sliding of the doors.
Aluminium provides high corrosion resistance, light weight and an aesthetic finish that remains in perfect condition over time. In addition, its design allows the sliding doors to slide silently and smoothly.
For maintenance, wipe regularly with a dry or slightly damp cloth to remove dust and dirt. Avoid using abrasive chemicals that may damage the finish. Make sure there are no obstructions in the grooves that interfere with the sliding of the doors.
This crossbar is compatible with board thicknesses between 18 mm and 22 mm, offering versatility for different sliding door designs. It can also be installed on 12 mm faces if a minimalist design is desired.
The asymmetrical design facilitates installation in thinner boards (12 mm) for a minimalist design. It also offers greater structural stability for boards up to 22 mm, providing rigidity and aesthetics in one product.
It is available in lengths of 2.35 m and comes in white painted, black painted and matt anodised finishes. Its asymmetrical design allows it to adapt to both modern styles and projects with more robust lines.
The HK18x12/22 Placard crossbar, in combination with the appropriate guide systems, is designed to securely support standard sliding doors, depending on the complementary hardware. For specific loads, it is recommended to consult the technical specifications of the complete system.
To maintain the painted or anodised finish, clean the header with a soft cloth and non-abrasive detergents. Avoid harsh chemicals and be sure to remove dirt in the areas of contact with the guides to ensure smooth sliding of the doors.
This crossbar is designed for 16 mm thick boards, providing a firm and stable structure for sliding door systems. It is ideal for projects where a slim and functional design is required.
The design of the U16x14 crossbar provides rigidity to the sliding doors, reducing the possibility of deformation during use. It also acts as an additional reinforcement that improves the overall stability of the system.
The crossbar is installed directly on the top or bottom edge of the 16 mm board using specific screws. It is crucial to correctly level the structure to ensure a perfect fit and smooth sliding.
The crossbar is available in white painted, black painted, matt anodised and gold anodised finishes. These options allow for easy integration into modern, classic or customised designs.
The crossbar complies with European quality and resistance standards in aluminium, guaranteeing high performance in daily use and offering a long service life thanks to its resistance to corrosion and wear.
The kit includes hardware, profiles and soft closing devices designed for double sliding door cabinets. It is compatible with board thicknesses of 16 mm and 18 mm, providing a complete solution for Placard systems.
The system is designed to withstand a maximum weight of 30 kg per door, ensuring smooth and safe sliding, even in frequently used applications.
The top and bottom profiles are supplied in a length of 2.35 m, but can be cut to size to suit the enclosure structure. This allows the system to be customised to the specific dimensions of each project.
The soft close is installed at the end of the bottom rail, using the devices included in the kit. Its assembly is intuitive and guarantees a cushioned movement that avoids knocks when closing the doors.
The steel ball bearings provide smooth and quiet running and optimise the functionality of the system. In addition, they guarantee a long service life and wear resistance under continuous use.
The Wave 16 handle is specifically designed for 16 mm thick panels, guaranteeing a perfect fit and stable installation on sliding doors.
It is available in lengths of 2.25 m and 2.7 m, with finishes such as white painted, black painted and matt anodised, allowing it to be combined with different styles of cabinets.
Installation requires machining the edge of the panel and fixing the handle using standard tools. The design allows for secure mounting and makes it easy to open and close the doors.
The RAL of the white gloss finish on the rails and handles of the Placard sliding door system is approximately 9003. The RAL of the anthracite grey finish is approximately 7043. The RAL of the black finish is approximately 9011.
The Wave 16 and Wave 16 E handle profiles for sliding doors have the same design and the same geometry for 16 mm thick boards. The difference is that the Wave 16 E handle profile is thinner and therefore more economical.
The system is designed to withstand a maximum weight of up to 50 kg per door, guaranteeing smooth and safe sliding thanks to its high quality components.
The kit is compatible with both wooden and glass doors as long as they are 10 mm thick. For glass doors, an additional adapter may be required (not included).
Basic tools such as a drill with aluminium or wood drill bits, spirit level, screwdriver, and tape measure are needed to ensure accurate installation of profiles and fittings.
Yes, the system allows fine height adjustment by means of the screws on the carriage feet, which facilitates alignment and levelling of the door after installation.
The RAL of the white gloss finish on the rails and handles of the Placard sliding door system is approximately 9003. The RAL of the anthracite grey finish is approximately 7043. The RAL of the black finish is approximately 9011.
This track is designed for sliding door systems from the Placard range, compatible with wooden or glass doors when using the appropriate hardware and components from this series.
Yes, the 2.35 m rail can be cut to size using suitable tools, such as an aluminium saw, to fit the required enclosure size.
In combination with Placard trolleys and hardware, this track can support doors weighing up to 50 kg, provided it is installed correctly.
It is recommended to leave a gap of at least 35 mm to allow for the correct installation of the track and to facilitate the movement of trolleys and sliding doors.
The RAL of the white gloss finish on the rails and handles of the Placard sliding door system is approximately 9003. The RAL of the anthracite grey finish is approximately 7043. The RAL of the black finish is approximately 9011.
This profile is designed for glass thicknesses of 8 to 10 mm, ensuring a perfect fit and secure fixing.
No, installation is by pressure using the specific components of the Placard system. However, it is recommended to check that the glass is correctly positioned to avoid unwanted movement.
Yes, the 2.35 m profile can be cut using suitable tools, such as an aluminium saw, to fit the dimensions of the glass or enclosure.
The following video shows how the sliding wardrobe door system is assembled.
The following video shows how the sliding wardrobe door system is assembled.
The rails are made of matt anodised aluminium, which guarantees durability and corrosion resistance.
The set includes a 3.9 m top rail, a 3.9 m bottom rail and a 3.9 m cover profile.
Yes, this system is compatible with sliding doors from the Placard B8 range and other similar systems, provided that the dimensions are compatible.
No, Placard rails can be installed using standard tools, without the need for specialised equipment.
The cover profile is used to cover and protect the visible edges of the rails, providing a clean and professional finish.
The Placard U10x16 crossbar is used to provide greater stability and structural reinforcement to sliding door systems, allowing for smooth and safe sliding.
The crossbar has a length of 2.35 m, a profile of 10x16 mm and a thickness of 1.5 mm.
It is made of matt anodised or painted aluminium (black or white), guaranteeing resistance to wear and tear and a high quality finish.
Yes, the crossbar is compatible with Placard sliding door systems and other similar models using this type of reinforcement.
Yes, the transom can be cut with standard tools to fit the specific dimensions of the cabinet or door.
The following video shows how the sliding wardrobe door system is assembled.
The profile is suitable for glass doors up to 2.35 metres long and 16 mm thick.
No, this profile is specifically designed for doors with a thickness of 16 mm, guaranteeing a perfect and secure fit.
The T24 profile is designed to provide top and bottom support for sliding glass doors, ensuring stability and smooth operation in the Placard 74 system.
The package includes a 2.35 m long matt anodised aluminium profile, ready for installation.
The main function of the Placard UB14x4 crossbar is to provide greater stability to sliding doors, avoiding oscillations during opening and closing.
The crossbar is made of aluminium, a strong and lightweight material that does not add extra weight to the cabinet structure.
The crossbar has a length of 2.35 m and 2.9 m, which makes it suitable for standard sized cabinets in Placard systems.
Yes, the aluminium used is treated to provide corrosion and wear resistance, prolonging its service life.
Installation is carried out by fixing the crossbar to the structure of the Placard sliding door system. It is recommended to follow the manufacturer's instructions to ensure correct installation.
The RAL of the white gloss finish on the rails and handles of the Placard sliding door system is approximately 9003. The RAL of the anthracite grey finish is approximately 7043. The RAL of the black finish is approximately 9011.
The Style 16 handle is designed to provide a robust and ergonomic grip when opening and closing sliding doors, ensuring strength and durability.
It is made of aluminium and is available in white painted and matt anodised finishes, offering modern design and corrosion resistance.
The handle has a standard length of 2.7 metres, allowing it to be adapted to doors of different dimensions by cutting to size according to the customer's needs.
Yes, the Style 16 handle is compatible with Placard sliding door systems, especially the Placard 74 system, and other similar systems.
The following video shows how you can easily install the aforementioned LED lighting.
The RAL of the white gloss finish on the rails and handles of the Placard sliding door system is approximately 9003. The RAL of the anthracite grey finish is approximately 7043. The RAL of the black finish is approximately 9011.
The Wave 16 and Wave 16 E handle profiles for sliding doors have the same design and the same geometry for 16 mm thick boards. The difference is that the Wave 16 E handle profile is thinner and therefore more economical.
The Wave 16 handle has a white painted or matt anodised finish, providing modern aesthetics and corrosion resistance.
The Wave 16 handle is installed by fixing it to the edge of the sliding door using the screws included in the packaging. Make sure that the profile is correctly aligned before screwing to ensure a perfect fit.
The rail can support a maximum weight of 70 kg per door, making it ideal for robust cabinets.
Door thicknesses of 10mm, 16mm, 18mm and 19mm are possible, providing flexibility in furniture design.
It is available in lengths of 2.35 m and 3.9 m, adapting to different cabinet sizes.
The RAL of the white gloss finish on the rails and handles of the Placard sliding door system is approximately 9003. The RAL of the anthracite grey finish is approximately 7043. The RAL of the black finish is approximately 9011.
The Placard 74 bottom rail is made of aluminium, which guarantees high strength and durability.
The RAL of the white gloss finish on the rails and handles of the Placard sliding door system is approximately 9003. The RAL of the anthracite grey finish is approximately 7043. The RAL of the black finish is approximately 9011.
The handle design includes a U-profile that finishes the door at the top and bottom, ensuring a hermetic longitudinal seal that enhances the aesthetics and functionality of the furniture.
The handle is fitted by inserting it over the sides of the board, ensuring a tight fit and a professional finish on cabinets with 19 mm thick boards.
The profiles are 2.35 m, 2.70 m and 2.9 m long and are designed to be cut to size according to specific installation requirements.
The kit includes 2 Sharp 19 handles, length 2.35 m, 1 U-profile 19x14, length 2.35 m and 1 dust cover for a complete and functional installation.
The Placard 90 system is distinguished by its steel ball bearings that guarantee a smooth and long-lasting glide, as well as profiles made of matt anodised aluminium, which improves resistance to corrosion and wear.
The system allows a levelling adjustment of up to 5 mm on the bottom rail by means of the included levelling mechanism, ensuring precise installation even on uneven surfaces.
No, this kit is designed exclusively for 19 mm thick boards. For other thicknesses, it would be necessary to use an adapted system or modify the components, which is not recommended.
Yes, the kit includes a U-shaped cross profile designed to reinforce the door structure and facilitate the installation of the handles. No additional accessories are required for this assembly.
The matt anodised finish makes it easy to clean and maintain as it is stain and wear resistant. It is recommended to clean with a soft cloth and non-abrasive products to preserve its appearance.
Yes, it is possible to install additional handles on the panels, provided they are compatible with the 16 mm thickness. It is recommended to drill accurately and use suitable screws to avoid damaging the material.
The system is designed to withstand a maximum weight of 30 kg per door. Exceeding this limit could compromise the smooth sliding and durability of the hardware. It is important to respect the specifications for optimum performance.
Yes, the steel ball bearing bearing system ensures smooth and durable sliding, even with intensive use. This design minimises wear and reduces noise when opening and closing the doors.
Basic tools such as a drill, screwdriver, tape measure, level and a saw to cut the aluminium profiles to size, if necessary, are required for installation. Tools are not included in the kit.
Yes, the kit is suitable for built-in wardrobes, provided that the dimensions of the space allow the installation of the included top and bottom rails, which have a maximum length of 2.35 metres.
The kit is designed for boards with a thickness of 18 mm. It is important that this measurement is respected to ensure the correct installation and operation of the system.
The system includes a ±5 mm height adjustment mechanism on the bottom wheels, allowing the doors to be precisely aligned after installation.
The hardware system supports a maximum weight of 30 kg per door. It is recommended not to exceed this limit to ensure optimum sliding and to avoid damage to the mechanism.
The kit includes profiles and rails with a length of 2.35m. These are designed to be cut to size according to the specific needs of the enclosure, ensuring a customised installation.
The soft closing mechanism includes a spring dampening system that prevents sudden shocks when closing the doors, prolonging the life of the system and improving safety in daily use.
The rail is installed directly onto the enclosure surface by means of plastic clips, without the need for pre-machining, which facilitates fast and efficient assembly.
Yes, it is designed to be compatible with soft-close devices and Flow system brakes, providing safe and quiet sliding.
The track is designed for doors with a maximum weight of 50 kg and a thickness of up to 20 mm, making it ideal for large and robust doors.
Yes, the rail can be cut to size to suit specific enclosure configurations while maintaining functionality and aesthetics.
It is made of aluminium with a black painted or matt anodised finish, providing high durability, corrosion resistance and a modern aesthetic finish.
Given that the unit load of each wheel is 70 kg, the complete Slip Ø100 4-wheel kit will withstand a weight of 280 kg.
The Gola-R profile includes a 2.35 metre long top profile and is compatible with the corresponding accessories such as brackets and screws.
It is ideal for kitchen units with handle-less fronts, providing a functional and aesthetic solution for opening the units.
The profile has a length of 2.35 metres, which makes it perfect for fitting into standard kitchen units.
Accessories such as Gola profile brackets and expansion screws are required for a complete and secure installation.
It is made of high quality aluminium with a matt painted finish, ensuring durability and strength.
The Optima Vantage cutlery tray is compatible with drawers of standard module widths of 600 mm and 900 mm, with a depth of 500 mm and a board thickness of 16 mm.
Yes, the Optima Vantage cutlery tray can be easily trimmed to fit the specific dimensions of the drawer, providing a customised installation.
It is made of high-quality, hard-wearing grey plastic, designed for durability and ease of cleaning.
Yes, the material used in the cutlery tray is resistant to moisture and daily wear and tear, ensuring longevity in kitchen environments.
The cutlery tray design includes a precise fit to keep it stable inside the drawer, preventing movement during use.
In order to know if a nut is compatible with a leveller, we have to look at the internal thread of the nut and at the thread of the leveller, which must coincide.For example, if we choose a 4 metric screw thread (M4), the nut also has to have an internal metric thread of 4 (M4).
In order to secure the rails of the Space + sliding door system, it is recommendable to use 4 x 25 mm screws (code 5032505) for 16, 18 and 19 mm units.
The Montevideo knob is made of brass, a high quality material that guarantees durability and strength.
The Montevideo knob has a diameter of 10 mm, offering a compact and discreet design.
The knob has a satin nickel finish, providing an elegant and sophisticated look.
Yes, the Montevideo knob is very easy to install, as it includes M4 screws to ensure secure fixing to furniture.
The packaging includes 50 units, ideal for large projects or serial installations.
The Almería handle is made of aluminium, a light, resistant and durable material, ideal for use in furniture.
The handle has a length of 148 mm and a gap of 128 mm, which makes it compatible with furniture of different sizes.
The handle finish is matt anodised, offering a modern design and elegant appearance.
Yes, the product is supplied with M4 screws for accurate and fast installation.
The packaging contains 25 units, perfect for large-scale installation projects.
The L'Alcudia handle is made of aluminium, which gives it strength, durability and an elegant finish.
This handle has a length of 78 mm or 148 mm, depending on the model, and an interaxis of 50 mm.
Yes, this handle can be installed both horizontally and vertically, adapting to various furniture designs.
It is available in a matt anodised finish, giving it a modern and versatile look.
Yes, the product includes M4 mounting screws, which facilitates fast and secure installation.
The Lanzarote handle is made of zamak alloy, offering high strength and durability.
The dimensions of the handle are 165 mm long, with an interaxis of 128 mm and a cross-section of 25 mm wide and 36 mm high.
This model has an elegant matt nickel painted finish, which adds sophistication and style.
Yes, the handle includes M4 screws in the package to ensure quick and easy installation.
Yes, its versatile design makes it ideal for kitchen, bathroom, wardrobe and other furniture.
The lot includes 20 Alfafar handles, each one accompanied by the necessary mounting screws, individually packaged to avoid knocks and scratches.
It is ideal for kitchen, bathroom, home and office furniture and is compatible with both horizontal and vertical doors.
Installation is simple, as it is fixed with the included M4 screws, ensuring a firm and precise integration into the furniture.
The Alfafar handle is made of high quality aluminium, which guarantees lightness and resistance to corrosion.
The matt anodised finish gives it a modern aesthetic and excellent durability against daily wear and tear.
Yes, it is possible to cut the 80 feet. To do so, you need to cut the foot at the leveller part, once this part has been disassembled, and make the cut with a cutting disk/saw that is suitable.
The RAL number of the white finish on the rails and handles of the Placard sliding door system is approximately 9003.
The RAL code of the anthracite grey finish is approximately 7043.
The RAL code of the black finish is approximately 9011.
The Wave 16 and Wave 16 E handle profiles for creating sliding doors have the same design and the same geometry for 16 mm thick board. The difference is that the Wave 16 E handle profile has a reduced thickness and is therefore more cost-effective.
The following diagram shows the detail of the machining that you need to carry out on the table top of a table in order to fasten the plate of the 60 - 80 feet.
The rail has a total width of 10 mm and a height of 7 mm. It is designed to fit into a 10 mm wide by 6.9 mm high machining on the top or bottom of the cabinet. These dimensions ensure precise integration and optimal sliding.
The Ready track is intended for light to medium weight sliding doors in applications such as wardrobes, dressing rooms or modular furniture. It is recommended for use with hardware systems compatible with mortise profile.
The profiles are press-fitted into a machined groove, without the need for additional screws. Their design allows for invisible and clean fastening, facilitating final assembly.
The rail is made of matt anodised aluminium, which gives it excellent resistance to wear, oxidation and abrasion. It is ideal for frequently used environments due to its lightness, robustness and professional aesthetics.
Only a milling machine or CNC is required to groove the furniture. No screws, adhesives or special tools are required to fix the rail.
The Neco system is designed for 16 mm thick non-unitized wood panels. It allows independent doors without the need for a central assembly.
This kit supports a maximum load of 50 kg per door, ideal for residential and commercial applications with heavy panels.
The lower carriages have steel ball bearings for high smoothness and durability. The upper and lower runners come in 2300 mm aluminium profiles, ready to be cut to size.
The following video shows how the sliding door system for wardrobes is assembled.
Neco brakes are installed directly without the need for prior machining. They are adjustable and allow the closing force to be adapted according to the weight and size of the door.
In addition to its lateral and vertical adjustment by means of eccentrics, it incorporates an anti-derailment system and an adjustable brake without drilling. Its assembly is simple and robust, suitable for demanding projects.
The system can be installed on ceilings or walls. For wall anchoring, the 5 anchors included are required, compatible with partition walls from 18 to 40 mm thick. No prior machining is required.
Each kit supports up to 80 kg per leaf thanks to its heavy duty ball bearing carriages, with ±10 mm height adjustment and anti-slide system.
It includes a soft-close mechanism pre-installed on the trolleys that ensures a soft closing of the doors without bouncing or impact.
The anodised aluminium rail is supplied with a length of 2,000 mm and can be cut to size on site if required. It also includes a 2,000 mm front cover to conceal the sliding system.
The kit contains: 1 top rail, 1 front cover, 1 set of carriages with brake, 5 wall anchors and 1 set of grey plastic side covers for aesthetic finishing of the system.
It is compatible with the Neco system with concealed track for sliding doors. It can be used in 1 or 2-leaf configurations and is suitable for installations with soft-close mechanism.
The profile is made of high-strength technical plastic, with a load-bearing capacity of up to 50 kg per leaf. Its dimensions are: 14 mm high, 30.5 mm wide and 2,350 mm long.
No, the rail is installed by screwing it directly to the base of the furniture, without the need for special machining. The kit includes the screws required for assembly.
Yes, the rail can be cut to size on site using standard carpentry tools. A clean cut is recommended to maintain sliding performance.
The grey plastic provides a neutral, unobtrusive finish, compatible with many furniture designs. In addition, it is a self-supporting, anti-corrosive and low-friction material, ideal for prolonged use without maintenance.
The following video shows how the sliding door system for wardrobes is assembled.
In order to get the door to sit flush with the unit, with the Gilder sliding system, you need to take into account the dimensions of the following diagram:
Each wheel must be inserted into a Ø15 mm hole previously drilled in the door, with a depth of 11 mm. The hole must be centred and drilled with a 35 mm diameter drill bit.
This kit is designed for sliding doors up to 20 kg. For higher loads, Emuca has specific solutions with ball bearings and damping.
Yes. The design of the Glider top rollers incorporates an adjustment system that allows the height of the door to be adjusted within a range of up to 4 mm.
The wheels are made of technical plastic with a metal axle, and the anchoring system uses zamak. This combination guarantees wear resistance and quiet running.
The package includes 1 set of carriages (top and bottom), 4 self-tapping screws and fasteners. It is suitable for 1 sliding door only.
The following video shows how the sliding door system for wardrobes is assembled.
The Space top track is inserted into a 17.7 mm wide groove. This housing allows the profile to be fixed stably and allows the system to slide without interference. No additional fastenings are required if the appropriate machining is carried out.
This track is specifically designed for Emuca Space sliding doors. It is recommended for use in conjunction with the upper and lower carriages, guides and brakes of the same system to ensure optimum, deviation-free operation.
The natural aluminium finish offers clean, professional aesthetics, high corrosion resistance and excellent mechanical durability. In addition, its low weight makes it easy to cut and install for industrial projects or customised workshop work.
The rail is supplied in lengths of 2.35 metres and is packaged in packs of 8 units. This format is designed for easy storage, transport and application in mass production projects or professional installations.
Yes, the Space top track is designed to integrate Space system brakes. Assembly is simple and is carried out on the same track, without the need for additional machining, allowing smooth and controlled closing of the sliding doors.
The selection is made according to the door weight. There are three soft close ranges, one for doors up to 8 kg, one for doors from 8 to 16 kg and one for doors of 26 kg.
As it is fully integrated into the module, it improves the aesthetics of the furniture as there are no visible profiles. It also reduces the accumulation of dust or dirt in accessible areas, ideal for high-end furniture, integrated kitchens or minimalist design spaces.
The profile is specifically designed to accommodate the wheels of the Neco trolley set, guaranteeing precise, backlash-free guidance. The geometry adjustment avoids vibrations, allowing smooth running even in modules with tight tolerances.
Yes, it can be cut with an aluminium mitre saw. It is recommended to make a clean cut, deburr the ends and avoid deformation in the wheel contact area. This ensures that the bearing continues to work without interruption or jamming.
Its load capacity, combined with the Neco trolleys (up to 50 kg), makes it perfectly suitable for high or frequently used doors. It is made of high-strength extruded aluminium and maintains its shape under prolonged stress without deforming.
The track is compatible with Neco brake systems designed for interior integration. These are housed directly in the rail without affecting the wheel pitch. This allows an invisible design to be maintained without sacrificing the functionality of the soft close.
The compact 30 mm diameter is ideal for mobile pedestals for everyday use, as it allows a low overall height of the unit to be maintained without compromising the load capacity. It also makes it easy to move around in confined spaces and areas with carpeting or rugs.
Can be fixed to chipboard, MDF or multi-laminate boards using wood screws or self-tapping metal screws in reinforced structures. The zinc-plated steel plate provides a rigid and stable base for direct bolting to skirting boards or interior reinforcements.
Yes. A common configuration is to fit two braked castors at the front and two unbraked castors at the rear, allowing the unit to be easily moved and locked when in position. This improves ergonomics and safety in the working environment.
It requires periodic cleaning with compressed air or dry cloth to avoid dust accumulation on the shaft. No lubrication is required due to self-lubricating plastic components, although in industrial environments dry grease can be applied to extend bearing life.
These castors are designed for dynamic loads up to 25 kg per unit. They have undergone rolling tests on hard surfaces, withstanding repeated cycles without deformation. Together, they allow drawer units of up to 100 kg with full stability when correctly distributed.
This M10 leveller can be installed on furniture with melamine, solid wood, aluminium or steel frames that have an internal thread or are prepared to receive an M10 threaded bushing or threaded sleeve. It is ideal for cabinets, display cabinets, counters and support furniture.
The overall height can be adjusted from 67 mm to a minimum of 51 mm thanks to the metric M10 thread. This adjustment is sufficient to correct unevenness of up to 16 mm on uneven floors or to adjust the levelling between adjacent modules.
Yes, thanks to its sturdy plastic base and chrome-plated steel rod, this leveller withstands high loads and is suitable for installations in shops, offices, kitchens or even technical showroom furniture. The circular base distributes the weight evenly without marking the floor.
Installation can be done from the inside of the cabinet using a hexagon spanner or from the outside with a flat tool if the design allows. Adjustment is accessible even when the cabinet is in a vertical position, facilitating on-site installation.
This model is optimised for spaces where the base of the unit has reduced contact with the floor or a more discreet solution is required. Its 43 mm base provides good support on even floors without invading too much visual or functional space.
The hexagonal base allows for more secure tightening with a spanner or hexagon socket during assembly or adjustment, preventing slippage and facilitating work in environments where tools cannot be accessed from below.
It is ideal for tall cabinets, display cabinets, storage shelves, kitchen furniture or commercial counters, especially in installations where precise levelling from the outside is required for reasons of accessibility or finish.
The M8 threaded shank can be used in both M8 insert bushings and embedded nuts, facilitating its application in wooden structures, melamine or even metal profiles with internal threads.
Made of steel and technical plastic, it withstands high loads per support point and is suitable for robust furniture. Although the load depends on the layout and type of floor, it is commonly used in applications up to 60 kg per point.
Thanks to its visible hexagonal design, it can be adjusted from the outside with a spanner without the need to move the cabinet. This makes it especially useful for mounting in confined spaces or recessed furniture where access underneath is limited.
The M6 circular leveller Ø35x14 is suitable for heavy duty furniture in contract, hospitality, kitchen and office environments, thanks to its reinforced plastic base and M6 steel screw that provides resistance to medium loads and absorbs small irregularities in the floor.
The aluminium painted finish offers excellent aesthetic integration in furniture with anodised aluminium profiles, metal structures or technical furniture plinths, as well as corrosion resistance in humid environments.
This leveller can be installed both on wooden structures and on M6 threaded metal bases. For metal structures without internal thread, the use of compatible threaded bushes or inserts is recommended.
This leveller is available in three screw heights: 20 mm, 35 mm and 45 mm. This provides an adjustment range between 8 and 15 mm depending on the model, allowing uneven floors to be compensated for without affecting the stability of the furniture.
For applications on chipboard, pre-drilling and the use of M6 metal inserts is recommended. The tightening torque should not exceed 2.5 Nm to avoid damaging the thread. The use of screwdrivers with adjustable clutch is recommended.
The following video shows how you can easily assemble the Sling wardrobe lifts.
The following video shows how you can easily assemble the Moka accessories.
Yes, the zinc-plated steel bracket is designed for maximum compatibility with modular enclosure bases, allowing mounting on both open-bottom structures and with retractable or demountable plinths.
A guide hole of Ø10.5 mm with tolerance H11 is recommended to ensure an optimum fit of the M10 screw in wood, chipboard or metal structures. This facilitates tightening without damaging the support.
This model allows adjustment from inside the cabinet using a 4 mm hexagonal Allen key. This speeds up levelling even after the module has been installed in its final position.
The lid is made of technical polyamide, with high resistance to impact, temperature and wear. It withstands intensive use in industrial, logistic or technical furniture environments without losing its shape or colour.
The levelling + bracket set has a total height of 46 mm. It offers an adjustment range of ±5 mm, ideal for compensating for uneven floors or adjusting the alignment of modules in installations.
The height adjuster of the Conus leg has a central nut that allows the desired extension to be securely locked in place. This mechanism prevents accidental displacement during use, making the table structure more rigid.
5 x 25 mm self-tapping screws are included, suitable for fixing to chipboard or MDF. Not recommended for use in phenolic boards or low density core materials without additional reinforcement.
Yes, the base of the Conus leg can be screwed to both solid panels and metal structures. For steel or aluminium profiles, the use of metal-specific self-tapping screws or rivnut type threaded rivets is recommended.
The leg can be cut at the bottom, eliminating the levelling section. The adjustable base must first be removed and the cut made with a suitable saw or disc. The lower limit will depend on the space required to reinstall the leveller.
The Conus leg, made of steel with Ø60 mm and metal fixing, is designed to support up to 100 kg per unit under normal conditions of use, provided it is installed vertically and on a firm and level support.
The wheel includes a square metal plate with countersunk holes for fixing screws. It is compatible with melamine, MDF or metal bases. The use of Ø4 to Ø5 mm countersunk head screws is recommended for a firm anchorage.
Yes, the tread is made of transparent thermoplastic rubber, ideal for vinyl, parquet or laminate floors. It provides a smooth and quiet glide without leaving marks or causing abrasion on sensitive surfaces.
This castor is designed for loads up to 40 kg per unit. For applications above this threshold, it is recommended to use wheels with a higher load capacity or to distribute the load over more wheels to ensure stability and durability.
The version with brake includes a locking mechanism that acts on the rotation of the wheel and the rotation of the axle, which provides greater security in fixed positions. The version without brake is ideal for furniture that requires maximum mobility without the need for locking.
Periodic cleaning of the shaft and tread is recommended to avoid accumulation of dust or fibres that may interfere with rotation. No lubrication is required, as the chrome-plated steel shaft and bearings are designed for long maintenance-free operation.
It is specifically designed for structures with metal plinth or modules that require adjustment from the inside of the side, such as kitchen units, technical cabinets or bathroom furniture with uneven floors. It is ideal for applications that require a robust and discreet fixing.
For assembly, an Allen key no. 4 is required to adjust the M10 leveller from inside the module. The bracket is screwed directly to the side of the cabinet with standard screws (not included), allowing a height adjustment of up to 25 mm.
The set has a sturdy metal bracket and a leveller made of steel and technical plastic. In standard applications, each unit supports up to 60 kg distributed, being suitable for furniture up to 250 kg if 4 units are used correctly fixed.
The system allows a height adjustment of 25 mm. The travel is designed to absorb uneven floors or compensate for differences between modules without compromising stability, with a minimum height of 46 mm and a maximum height of 71 mm.
This model incorporates a metal bracket that improves lateral support, especially useful in furniture that is installed in series or that requires frequent disassembly. In addition, its concealed plastic cover improves aesthetics and prevents dirt from entering the mechanism.
This leveller incorporates an M10 thread that allows millimetric adjustment of the height of the furniture. It is compatible with standard M10 nuts, which facilitates its integration into bases, brackets or industrial metal structures.
Depending on the model chosen, it allows a height adjustment between 38 mm and 66 mm. Its M10 screw with Ø23 mm base and plastic cover facilitates precise adjustment even on uneven floors.
This leveller is ideal for applications in technical furniture, metal cabinets, shelving or tables with high static loads. Its zinc-plated steel structure guarantees corrosion resistance in damp or heavy-duty environments.
Thanks to its threaded steel shaft and sturdy plastic base, this leveller can support up to 250 kg per unit in static use. The polyamide cover protects the floor and improves sliding without sacrificing stability.
It can be installed from inside the module using a recessed or welded nut. It can also be mounted externally on quick-fix brackets, adapting to modular or custom configurations.
A maximum torque of 6 Nm is recommended for fixing to metal structures with an M6 nut. This value guarantees a secure anchorage without compromising the strength of the hexagonal plastic component.
The black plastic hexagonal base has a dimensional tolerance of ±0.1 mm, making it compatible with machine-assisted assembly processes (robot or pneumatic screwdriver), reducing insertion errors on the production line.
Yes, the M6 screw is fully compatible with threaded inserts (helicoil or metal M6 type) and metric steel or aluminium rivet nuts. This allows it to be installed in boards, metal profiles or composite housings with threaded reinforcement.
Thanks to its zinc-plated finish and technical plastic materials, this leveller withstands moderate ambient humidity. However, for outdoor applications or direct exposure to water, it is recommended to use models with bichromate or stainless steel treatment.
The hexagonal geometry allows secure tightening with a spanner or socket spanner, preventing slippage and improving accuracy in height adjustment. It is ideal for applications where access to the adjustment point is from the outside of the cabinet.
The RAL of the finish of the accessories for inside Moka wardrobes and dressing rooms is approximately 8019.
The castor incorporates a spigot with thread and plastic fixing nut. For assembly, it is necessary to drill a Ø10 mm through hole in the furniture board (minimum thickness 16 mm) to insert the spigot, which is fixed on the inside with the included nut.
Yes, this castor is suitable for melamine, MDF and chipboard structures. It is recommended to reinforce the fixing point if the furniture is to be moved frequently or is loaded with more than 30 kg.
The nut fixing system allows a more discreet integration from the outside of the module, which improves the aesthetics in light furniture applications. In addition, it is quicker to assemble in series or automated installations.
Thanks to its 50 mm diameter and technical plastic tread design, it performs well on parquet, stoneware or wooden floors with minor unevenness. Not recommended for use on carpeted or carpeted floors.
Provided that there is internal access to the anchorage point for the fixing nut, it is possible to integrate it into pedestals with feet. Otherwise, it is preferable to use models with a front or side mounting plate.
The large diameter plastic base (Ø60 mm) distributes the load efficiently, protecting delicate surfaces such as wooden or vinyl flooring. The M10 stem ensures precise and robust adjustment, ideal for heavy furniture or intensive use.
This leveller supports up to 100 kg per unit, depending on the type of floor and correct installation. On hard floors such as concrete or tile, maximum performance is achieved. On soft surfaces, additional underlay reinforcement is recommended.
Yes, it is compatible with M10 wood insert nuts. It is advisable to use reinforcement sleeves or insert nut with structural adhesive to improve tensile strength in low density panels.
This leveller allows adjustment of up to 25 mm, offering an effective solution for uneven floors. The wide base design helps to maintain lateral stability, even on tall or narrow furniture.
The matt chrome surface treatment provides medium corrosion resistance. For applications in humid environments or protected exteriors, it is recommended to reinforce with a plastic washer or to use versions with specific anti-corrosion coating.
No, this clamp is designed exclusively for Line 2 and Plasline 2 skirtings made of extruded plastic. For metal edges or curved profiles, it is recommended to use solutions with metal clip or reinforced bracket fixing.
The clamp uses a press-fit system with Ø6 mm plugs that fit into a 20 mm x 7 mm socket groove. This system allows a secure fixing without the need for tools, facilitating the assembly and disassembly of the trim.
Yes, the clamp is made of high-strength technical polypropylene that retains its elasticity after multiple assembly and disassembly cycles. However, it is recommended that the lugs are checked after more than 10 uses to ensure that they are held in place optimally.
The maximum recommended lateral tolerance is ±1 mm with respect to the axis of the pin, provided that the socket groove is correctly machined. This flexibility makes it possible to compensate for slight deviations in assembly without compromising the firmness of the anchorage.
Yes, the black plastic material is UV stabilised and resistant to non-abrasive cleaning agents. It can be installed in kitchen or bathroom furniture without loss of performance or deformation over time.
The set consists of 4 castors: 2 with brakes and 2 without brakes, plus mounting screws. The entire system is packaged in a single batch.
Each wheel can carry up to 70 kg, so that the complete batch allows a maximum load of 280 kg.
The castors are made of a combination of steel and plastic with a grey finish. This structure ensures resistance to use in domestic and office applications.
Slip 2 castors include a mounting plate with screws for easy installation directly onto the base of the furniture.
These castors are ideal for all types of home and office furniture, thanks to their ease of installation and combination of castors with and without brakes.
The calculation for adhesive tape that should be used to guarantee the correct fastening of the glass is defined by the size of the door designed. For this task we have a simple calculation table.
The following sketch shows details of the machining that should be carried out for the bracket of the Plus 4-4E-11-16-18 aluminium profiles.
The following sketch shows details of the machining that should be carried out for the bracket of the Plus 14 aluminium profiles.
The following video shows how you can easily assemble the abovementioned storage system in a kitchen.
This nut is specially designed for applications where a robust fixing with a low mounting profile is required, such as compact furniture assemblies or metal structures where board thickness or access is limited.
Its 1.2 mm thick extra-flat design minimises the volume occupied on the surface of the material, allowing for a cleaner, safer and more aesthetic finish, ideal for modules where the component must be concealed or flush.
It is designed for use with standard pitch M4 screws. It is especially recommended for use in conjunction with M4 screws with nickel plated extra flat head to maintain consistency in finish and mounting tolerances.
The nickel-plated steel body provides excellent mechanical strength as well as high protection against rust in humid environments or when subjected to wear and tear from continuous use or repeated assembly.
This model is marketed in industrial presentations of 2,000 units, which allows for the optimisation of logistical and installation processes in mass production environments or the assembly of modular furniture.
This bracket is designed for joining boards in cabinets, furniture and similar structures. Thanks to its 5 mm thickness and 6 mm diameter holes, it offers great compatibility with wood, chipboard and MDF boards commonly used in professional carpentry.
The zinc-plated coating protects the bracket against corrosion and wear due to moisture or frequent handling. It is ideal for indoor installations with durability requirements, such as kitchens, dressing rooms or storage modules.
Although no maximum load is specified, its 34x25 mm cross-section steel design with a thickness of 5 mm allows for high mechanical strength in structural connections, especially in combination with suitable bolts and perimeter mounting.
For efficient fastening, screws with a diameter of 6 mm, compatible with the holes in the bracket, are recommended. The length will depend on the thickness of the board to be joined, ensuring a firm fixing without penetrating the panel.
The industrial presentation of 1000 units allows distributors, carpenters and manufacturers to work efficiently on large volume projects, reducing logistical costs and ensuring constant availability on production lines.
T brackets allow for optimal right angle clamping, especially useful in the installation of shelving where it is required to fix the end of the board to a side or rear panel, improving structural stability.
These brackets are designed to be used with boards having a minimum thickness of 15 mm, which allows a secure fixing without risk of breakage or deformation of the support.
The recommended fastening system is with self-tapping screws suitable for the type of furniture material. The brackets have optimised fixing holes to facilitate quick and stable assembly.
The T-brackets have a length of 42 mm × 32 mm, a width of 20 mm and a thickness of 2 mm. These dimensions make them ideal for applications requiring compact and unobtrusive reinforcement without sacrificing strength.
They are available in zinc-plated and nickel-plated finishes, both with anti-rust properties. Zinc plating provides excellent protection against humidity, ideal for kitchens, bathrooms and demanding environments.
The RAL code of the white finish of the Optima cutlery holder is approximately 9003.
The RAL code of the grey finish of the Optima cutlery holder is approximately 7001.
The RAL code of the anthracite grey finish of the Optima cutlery holder is approximately 7043.
The Optima cutlery holder has a wide range of models and sizes. The cutlery holder intended for the Vantage-Q drawer is not compatible with the Slim drawer. as a a cutlery holder model exists for the Slim drawer.Both models have the same depth but not the same width, specifically, the cutlery holders for the Slim drawer are 6 mm narrower than the cutlery holders for the Vantage-Q drawer.
Yes, for panels of 16 mm thickness, is possible to use the module 500 mm Vantage-Q drawer.
Yes, for panels of 16 mm thickness, is possible to use the module 500 mm Vantage-Q drawer.
Thanks to its self-adhesive backing, this bumper sticks easily to clean, dry melamine, glass, metal, wood or plastic surfaces without the need for tools or drilling.
The semi-transparent finish allows the bumper to blend discreetly into furniture of any colour or texture, ensuring effective protection without compromising the aesthetic design of the furniture.
It is ideal for use in assembly lines for cabinets and doors, especially in kitchens, bathrooms or office furniture, where damping of the closure or subtle separation between components that may generate contact noise is required.
Yes, the Vantage-Q waste container is compatible with the 18 and 19 mm Slim drawer.
The 10 mm model offers more contact surface and impact absorption and is therefore recommended for larger or heavier doors. The 7 mm is more discreet and suitable for lower load or reduced visibility applications.
The presentation in packs of 2500 units allows efficient replenishment in industrial processes, optimising production times and reducing costs per unit. Ideal for distributors, manufacturers and workshops with high turnover.
The following video shows how you can easily assemble the abovementioned storage system in a kitchen.
Yes, for example, if we want to assemble a drawer for a module width of 500 mm, we have to use the existing code for the 600 mm module and cut the base and rear panels to the width indicated by the formula. Width of module interior - 19 mm.
The spiked design allows the nut to lock firmly into the board, preventing rotation and ensuring a stable fixing for levelling feet and bolts, even under vibration or continuous load.
This nut is designed to be pressed into a 12 mm diameter hole, ensuring proper fit without the need for adhesives or additional reinforcement.
The part is compatible with M6, M8 and M10 metric thread bolts, each with different dimensions. Be sure to select the appropriate metric nut for correct engagement.
This nut is ideal for applications where robust fixing is required on furniture with adjustable legs or on structures subjected to vertical loads, thanks to its resistance to twisting and ease of assembly.
The product is supplied in packs of 1000 units, facilitating its use in industrial projects, mass production or large technical furniture installations.
The extra-flat 1.2 mm high head allows for almost flush fixing to the surface of the furniture, ensuring clean aesthetics and no protrusions that could interfere with adjacent components or decorative elements.
These screws are available in lengths of 8, 10, 12, 20, 25, 30 and 40 mm, allowing the professional to select the most suitable size for the type of board or joint to be made.
The nickel plated extra flat M4 bolt is designed to work in conjunction with the extra flat head M4 nut to form an efficient and discreet fastening system for panels or light metal structures.
It is manufactured from hard-wearing steel with a nickel-plated finish, providing excellent resistance to corrosion and mechanical wear, making it ideal for prolonged use in demanding environments such as kitchens, offices and heavy duty furniture.
The extra flat M4 screws are supplied in boxes of 2,000 units, representing an efficient solution for distributors, furniture manufacturers and industrial carpenters who require volume and consistency in their assembly projects.
The RAL code of the anthracite grey finish of the Sling is approximately 7005.
The RAL code of the white finish of Sling is approximately 9003.
It uses a magnetic system that allows the automatic lock to be activated or deactivated without the need for a visible lock, while maintaining the external aesthetics of the module.
The kit contains 1 lock and accessories for installation, packaged in a box of 25 units.
Assembly is very simple thanks to a guide sticker that marks the exact machining points and the position of the lock, facilitating installation.
It is made of white plastic and incorporates internal metal parts to ensure the reliability of the system.
To open the door, simply approach the magnetic key to the lock from the outside, allowing discreet and secure operation.
The key has an internal magnet that allows the magnetic locking system of the Revalock lock to be activated or deactivated from the outside of the dashboard, guaranteeing secure access without visible elements.
It is particularly suitable for locking systems on kitchen units or other furniture where access restriction is desired, as a child safety measure or to keep the contents out of unauthorised reach.
The key has a circular handle-like shape, which makes it easy to handle. It can also be conveniently stored out of reach of children to prevent unwanted access.
It is made of white plastic, which makes it light and easy to handle, suitable for frequent use without damage.
The product comes in packs of 25 units, ideal for multiple installations or replacement in furniture projects with Revalock locks.
For proper installation, the module must have a minimum width of 900 mm, a door of 450 mm and a minimum internal depth of 490 mm. The internal height of the module must be between 620 mm and 780 mm.
This model is available in left or right hand versions and can be mounted with either a 90° arm hinge or a straight hinge. It also incorporates a soft-close system for quiet and safe sliding.
The system consists of 2 independent trays with chrome-plated round rod, each with a load capacity of 20 kg, for a total of 40 kg per complete system.
The trays have an adjustment system that allows them to be easily adjusted in height, adapting them to the end user's organisational needs.
The corner mechanism is made of chrome-plated steel and the base of the trays is made of white melamine, which offers strength and durability in kitchen environments.
These trays are designed to be installed inside furniture, cabinets or walls with the screws included. The kit incorporates brackets and fittings that allow direct fixing to wooden surfaces or derivatives, ensuring a stable hold.
Yes, they are made of high-strength white plastic, which makes them suitable for use in wet environments such as bathrooms or kitchens. Their surface is easy to clean and does not deteriorate with regular exposure to steam.
Yes, thanks to the screw mounting system, the trays can be easily removed for cleaning or relocation to another area of the furniture, without affecting their functionality or damaging the installation surface.
Totally. Its 350 mm format allows for modular placement inside wardrobes, so that several trays can be installed vertically or in parallel, maximising storage and internal organisation of the furniture.
Maintenance is minimal. Periodic cleaning with damp cloths and neutral products is recommended. As they are made of white plastic, they do not rust or deteriorate with regular use, even in humid areas.
For proper installation, a minimum cabinet depth of at least 300 mm for the 280 mm model and 430 mm for the 410 mm model is recommended, ensuring that the bracket is fully seated without protruding.
The bracket is attached using screws included in the kit. The holes must be drilled in the base of the module or in the bottom of the shelf, using industry standard tools.
This system is compatible with wine, champagne, cocktail and cognac glasses, with a standard diameter base. The single-line structure allows 2 to 3 glasses to be safely stored, depending on the model and type of glass.
Yes, the stand is made of chrome-plated steel, a material resistant to humidity and intensive use, which makes it suitable for professional kitchens, guaranteeing durability and aesthetics without corrosion.
Minimal maintenance is required: periodic cleaning with a dry or slightly damp cloth is sufficient. Do not use abrasive products or detergents containing chlorine.
We recommend the use of 4 mm thick glass, with polished edges for a perfect fit.
No, the profile is supplied without fasteners, therefore, beading and brackets must be purchased separately.
Yes, a fixing bead is required to hold the glass in place, and connecting brackets are needed to assemble the structure.
It is assembled by means of connecting brackets and fixed with screws or specific adhesives depending on the application.
It is made of extruded aluminium with a matt anodised or textured black painted finish, giving it an elegant design.
They allow the Sling hanger to be installed on the side of the wardrobe, ensuring that the hanger is tilted forwards and optimising space for hangers.
They are fixed to the bottom of the wardrobe as a hanger stop. No complex tools are required for mounting.
They are made of sturdy plastic and are available in all the finishes of the Sling hanger.
Each package contains 1 set of spacers, sufficient for one installation.
This profile is designed for 4 mm thick glass.
Subtract 6 mm from the overall size of the door to calculate the correct glass size.
It is specifically designed for the Plus 4 system, so its compatibility with other systems will depend on its dimensions and fixing method.
The use of angle brackets is recommended to ensure stability and correct alignment of the installation.
It has a thickness of 6 mm.
No, the glass sides are already mounted, just like the traditional metal sides.
It is designed for 4 mm thick glass with a polished edge.
Fixing is done by means of double-sided adhesive tape (not included). It is recommended to use opaque glass to hide the adhesive.
Yes, a glazing bead is required to accommodate the glass and connecting brackets to assemble the structure.
Subtract 4 mm from the overall size of the door to obtain the correct glass size.
It is made of extruded aluminium with a matt anodised finish, which guarantees strength and durability.
It is made of welded stainless steel, which guarantees high strength and durability. It has a mocha RAL 8019 painted finish, ideal for combining with wooden furniture.
The wire crate is designed to withstand a uniform load of up to 15 kg, depending on the type of support and installation system used.
Its design incorporates 4 tabs (one on each corner) for easy attachment to compatible brackets in the enclosure.
Each package includes 2 units ready for use.
Yes, provided the cabinet has adequate internal space for the drawer size (475 mm, 675 mm or 775 mm wide and 201 mm high). It is also compatible with standard cabinet structures with flange fixing systems.
They are calculated for a side thickness of 16 mm.
The RAL of the white finish of the siphon guard is approximately 9003. The RAL code for the grey finish of the siphon guard is approximately 7045. The RAL code for the anthracite grey finish of the siphon guard is approximately 7043.
The system has an adjustable telescopic rod that allows it to be adjusted to interior widths of between 450 and 1150 mm, depending on the reference chosen. This makes it compatible with multiple cabinet configurations.
It is easily installed by screwing it onto the side panels of the module or cabinet. Mounting hardware is included and does not require specialised tools.
The Sling folding hanger is designed to support up to 12 kg of static load, thanks to its reinforced metal structure and cushioned return system.
It is available in chrome, white or titanium finish. In addition, each unit includes cover caps to hide the fixing screws and improve the interior aesthetics of the enclosure.
Both the bottom and the back are 16 mm thick.
Yes, the Sling hanger incorporates a cushioned return system that provides a smooth and controlled descent, avoiding knocks or sudden movements that could damage the furniture or its contents.
The system allows a tilt adjustment of up to 120°, with 5 possible levels: 12°, 24°, 36°, 48° and 60°, in both directions.
The kit includes 2 shelf supports, 2 hooks, 4 wood screws Ø3,5x16 mm and 4 plastic caps.
No, the system is supplied without wooden shelf, only the mounting accessories are included.
The brackets are made of steel and zamak with a stone grey (RAL 7048) or textured black painted finish, depending on the model.
The tilt is adjusted by means of a knurled bolt included in the bracket, allowing the desired angle to be set precisely.
The snap-on hinge allows quick installation without the need for additional tools, while the screw-on hinge offers a more traditional screw fixing, providing greater security in certain applications.
The hinge allows three-dimensional adjustment in the horizontal, vertical and depth axes, which facilitates the precise alignment of doors and the correction of misalignments during installation.
The differentiated spring mechanism improves the smoothness of the closing and ensures uniform pressure on the door, avoiding sudden movements or misalignment with continuous use.
This hinge is recommended for door and panel thicknesses between 14 and 23 mm, making it versatile for different types of kitchen, bathroom and office furniture.
Its 110° opening range allows wide access to the inside of the cabinet, making it easy to handle objects without obstruction when opening the door.
The following video shows how to assemble such a box in a simple way:
The bolt-on hinge requires screw fixing, whereas the snap-on hinge allows faster screwless assembly, making installation easier.
The X95 straight hinge is three-dimensionally adjustable to improve the fit and joint in the door.
Recommended for use on doors with a thickness between 14 mm and 23 mm.
This hinge allows a 110° opening, ideal for kitchen cabinets and furniture in general.
The cup drilling range is 3 to 8 mm, with a standard circumference of 35 mm.
The X95 Supplement is a support base that enhances the functionality of X95 hinges, providing a better fit and stability at installation.
It is specifically designed for use with the bolt-on X95 series hinges.
It offers ±2 mm height adjustment by means of coloured holes for optimum adjustment.
It is fixed with screws to the door panel, with a spacing of 32 mm and 37 mm from the inner edge of the door.
It is made of nickel-plated steel, which guarantees high strength and durability.
The following video shows how this system works:
This supplement allows a precise adjustment of ±2 mm, which facilitates the alignment of the door without the need to dismantle the hinge.
The use of Ø 6.3 x 14 mm screws is recommended on surfaces with an entry hole of Ø 5 mm, ensuring a firm and secure fixing.
Manufactured from nickel-plated steel, the supplement increases the durability and stability of the X95 Euro hinge, reducing wear and improving load distribution.
This supplement is specifically designed for the X95 Euro series, optimising its performance and ensuring proper mounting.
Yes, it can be used in conjunction with other three-dimensional hinge adjustment solutions, provided they are compatible with the X95 Euro system.
It is installed by means of screws, ensuring a firm hold on the panel. The cup has a diameter of 35 mm and the drilling range is 3 to 8 mm, which facilitates mounting in different configurations.
It is designed for door thicknesses between 14 mm and 23 mm, providing a precise fit on adjoining furniture thanks to its steep angle design (super elbow).
The X95 super-corner hinge allows a 110° opening, guaranteeing a fluid and wide movement for greater accessibility in the cabinet.
Yes, it is three-dimensionally adjustable, allowing for height, depth and lateral alignment adjustments for precise mounting.
It is made of steel with a nickel-plated finish, which makes it resistant to corrosion and wear, as well as offering a modern and professional aesthetic.
Full-extension allows full access to the inside of the drawer, facilitating organisation and unobstructed space utilisation.
The push mechanism allows the drawer to be opened by simply pressing it, eliminating the need for handles and offering a cleaner and more functional design.
These slides can carry up to 30 kg of load, making them ideal for kitchen and office furniture where stability and strength are required.
They are available in lengths from 300 mm to 600 mm. The choice depends on the size of the drawer and the space available in the cabinet.
They are installed by means of screws fixed to the drawer and have a trigger that allows the slide to be removed for easy assembly and maintenance.
Full-extension allows full access to the contents of the drawer, facilitating organisation and avoiding inaccessible areas, unlike partial extraction, which limits access.
These slides hold up to 30 kg per set, making them ideal for kitchen, bathroom and office furniture where stability, strength and smooth gliding are required.
They are available in lengths from 250 mm to 600 mm, with zinc plated and black painted steel finishes, allowing them to be adapted to different styles of furniture.
The trigger system allows the slide to be easily removed, facilitating installation, maintenance or replacement of the drawer without the need for additional tools.
The cabinet must have adequate space for the installation of the slides and a sturdy structure that allows them to be fixed correctly, ensuring optimum operation of the drawer.
The brackets allow a more stable and secure fixing of the slides to the furniture, ensuring a precise assembly and a better distribution of the load in the drawer.
Ball bearings provide smoother and quieter sliding, reducing friction and increasing the durability of the slide compared to other systems such as nylon or roller slides.
These slides have a load capacity of up to 30 kg, making them ideal for kitchen, bathroom and office furniture where full access to the drawer is required without compromising stability.
The trigger system allows the slide to be removed quickly and easily, facilitating installation, maintenance and cleaning of the furniture without the need for additional tools.
They are available in lengths from 300 mm to 600 mm. The choice depends on the size of the drawer and the space available in the cabinet, ensuring optimum performance.
These slides feature full-extension, ball bearings and a load capacity of up to 35 kg, making them perfect for kitchen, office and storage drawers where strength and full access to contents is required.
The soft-close system uses a damping piston in both slides to reduce the impact when closing the drawer, avoiding sudden knocks and extending the life of the unit.
They can support up to 35 kg per slide set and are therefore recommended for heavy duty furniture such as kitchens, filing cabinets and heavy storage furniture.
The zinc plated steel finish offers corrosion resistance and a shiny metallic appearance, while the black painted finish provides a modern, understated aesthetic with an extra layer of protection against wear and tear.
To dismantle the drawer, the trigger system located on the runners must be activated, allowing the drawer to be released from the cabinet structure quickly and without the need for tools.
The following video shows how you can easily assemble the Concept inner drawer.
These slides have a load capacity of up to 68 kg, whereas standard slides support around 30-35 kg. Their reinforced design and high quality ball bearings allow them to be used in more demanding applications.
The height of 51 mm provides a larger contact surface with the cabinet, which increases stability and reduces drawer twisting, especially in wide or heavy drawers.
Full-extension allows the drawer to open fully, providing unrestricted access to its contents, which is especially useful in work or storage environments where heavy objects are handled.
These slides include a trigger system that allows the drawer to be removed quickly and easily, which facilitates maintenance or cleaning tasks without the need for additional tools.
They are ideal for industrial furniture, high capacity filing cabinets, workshop furniture and storage in kitchens or areas where heavy loads need to be supported in a stable and safe manner.
The front attachment kit is designed specifically for the 141 mm high Vantage-Q internal drawer. It is compatible with square side rails, allowing the installation of front panels in internal storage systems.
This product requires direct mounting on the side and front panels of the drawer. It is recommended to be installed on clean, flat surfaces using the included fixings. The modular design allows for precise adjustment to ensure a tight and aligned installation.
The set is made of high quality plastic with a grey or white finish. This material combines lightness with excellent impact resistance, guaranteeing durability in everyday environments.
The design of the hooks ensures a robust fixing between the front panel and the side rails. In addition, it acts as a reinforcement in the corner of the drawer, preventing unwanted movement and ensuring stability over time.
This accessory is designed according to Emuca quality standards to ensure reliability. Although no specific international standards are specified, its optimised design minimises risks of assembly and use, providing safety in storage facilities.
The rectangular siphon saver is suitable for kitchen and bathroom drawers, especially for installations under sinks and washbasins of the Concept model.
The product is made of high quality plastic, which makes it resistant to daily use, durable in the long term and easy to maintain.
To install the siphon saver, it must be attached to the rear of the drawer using the screws provided. The process is quick and requires no specialised tools or preparation.
The siphon saver optimises space by concealing the siphon and allowing efficient storage inside the drawer, leaving more room to organise other items.
The siphon saver is available in three finishes: grey (SKU 3044221), white (SKU 3044215) and anthracite grey (SKU 3044223), allowing it to be integrated into different styles of furniture.
The curved trap saver is designed specifically for washbasins and is mainly used in bathroom furniture, while the rectangular trap saver is more suitable for kitchen areas or sinks. The curved design is better suited to confined spaces and bathroom traps.
The curved design optimises space in the drawers under the washbasin, allowing for a more discreet and efficient installation. In addition, its shape favours organisation in furniture with more intrusive siphons.
It is made of high-quality plastic and is available in three finishes: white (SKU 3044315), grey (SKU 3044321), and anthracite grey (SKU 3044323), offering aesthetic and functional options.
Yes, this siphon saver is compatible with most standard bathroom furniture, thanks to its versatile design and easy adjustment to the available space.
Installation is simple: it is fixed directly to the back of the drawer with screws. No specialised tools are required, and its design allows for quick and safe assembly.
The kit includes all the essential parts to assemble the drawer structure: runners, ribs, and hook sets. Depending on the installation, additional bases and fronts may be required and must be purchased separately.
The damped self-closing slide system allows for smooth, noise-free sliding, reducing impact and improving the life of the mechanism, making it ideal for frequent use.
This drawer supports up to 40 kg maximum load, which guarantees strength for domestic and commercial applications. Its steel structure reinforces its durability even with heavy loads.
It is available in different depths, from 300 mm to 500 mm, allowing it to be adapted to different types of furniture and storage needs.
It is made of epoxy-coated sheet steel, offering finishes in satin white and anthracite grey. These materials provide resistance to corrosion and a modern and elegant design.
Vantage-Q slides incorporate a soft-close system that minimises resistance to use and provides a smooth, quiet glide, improving drawer comfort and durability.
These slides can carry loads of up to 35 kg, making them ideal for kitchen, bathroom and storage furniture that requires reliable sliding under medium loads.
They are available in depths of 270 mm, 300 mm, 350 mm, 400 mm and 450 mm, allowing them to be adapted to different drawer sizes according to the user's needs.
They are made of steel with a bright zinc-plated finish, which ensures high corrosion resistance and a modern aesthetic appearance. The material provides a long service life even in heavy-duty environments.
Installation is carried out by fixing the slides to the cabinet and the drawer with screws. It is important to make sure that both slides are level and aligned to ensure smooth sliding and to avoid misalignment of the lock.
The rectangular siphon saver makes better use of the space in a bathroom drawer by preventing the siphon from clogging, providing a more organised and functional storage area.
It is easy to install and is fixed to the back of the drawer with screws. It does not require specialised tools and can be easily adjusted for correct positioning.
It is made of high quality plastic and is available in three finishes: white (SKU 3044115), grey (SKU 3044121) and anthracite grey (SKU 3044123), allowing it to adapt to different furniture designs.
By concealing the siphon within its structure, the siphon saver frees up useful space inside the drawer, allowing objects to be stored more efficiently and without wasting volume.
Each package includes 6 units, making it easy to purchase for multiple bathroom furniture installation projects. Available in three colours to match different styles.
The set of side rails improves storage in the drawers, allowing objects to be placed in an organised manner and preventing them from shifting during use.
These rails are available in depths of 270 mm (SKU 3015725) and 300 mm (SKU 3015825). The choice depends on the size of the drawer and compatibility with the drawer structure.
They are made of plastic and aluminium, with a metallised aluminium finish. These materials offer a combination of strength, lightness and modern aesthetics.
For their installation, it is necessary to have the specific rear and front brackets that allow them to be correctly fixed to the structure of the box.
These rails are designed for Vantage-Q drawers and are available in different lengths (from 270 mm to 500 mm) to suit different drawer depths.
The damped self-closing system allows the drawer to close smoothly and silently, avoiding sudden knocks and reducing wear and tear on both the runners and the structure of the furniture.
The 127 mm height provides a balance between storage capacity and compact design, making it ideal for organising utensils, accessories or small items in kitchens, bathrooms and offices.
The main difference between the 450 mm and 500 mm versions is the depth of the drawer, which affects the amount of storage space available and its compatibility with different furniture.
Yes, this drawer is compatible with a wide variety of furniture, both in kitchens and in bathrooms and offices, thanks to its versatile design and universal mounting system.
Installation is carried out by assembling the parts included in the kit and fixing them to the sides of the furniture. It is important to align the slides correctly to ensure optimum sliding and to make the most of the soft closing system.
The siphon saver allows a gap to be left at the back of the drawer to facilitate the passage of the sink drain pipe, optimising storage space.
It is available in sizes 200 mm, 350 mm and 550 mm wide, with finishes in white, aluminium and anthracite grey, allowing it to adapt to different styles of furniture.
Installation is simple and is carried out by fixing the part with screws to the drawer. A screwdriver is recommended to ensure a firm hold. Screws are not included in the kit.
It is ideal for kitchen and bathroom furniture, especially in drawers under sinks or washbasins where free space is required for pipework.
It is made of steel, which provides high resistance to moisture and durability in environments of frequent use, avoiding deformation or damage over time.
Vantage-Q ribs are made of steel for strength and durability. In addition, their design allows for precise assembly, ensuring stability in the drawer structure.
The 83 mm height is ideal for medium-sized drawers, providing a balance between storage capacity and compact design for kitchen, bathroom and office furniture.
Yes, the ribs allow for minor adjustments after installation to improve the alignment of the drawer, ensuring correct closing and smooth operation.
They do not require specific maintenance, although it is recommended to clean them periodically with a dry cloth to avoid dust accumulation and to ensure a good aesthetic appearance.
The choice of finish depends on the design of the furniture and aesthetic preferences. The white finish is ideal for a cleaner, more minimalist style, while the aluminium finish offers a modern, industrial look.
Vantage-Q ribs are made of steel for strength and durability. In addition, their design allows for precise assembly, ensuring stability in the drawer structure.
The 83 mm height is ideal for medium-sized drawers, providing a balance between storage capacity and compact design for kitchen, bathroom and office furniture.
Yes, the ribs allow for minor adjustments after installation to improve the alignment of the drawer, ensuring correct closing and smooth operation.
They do not require specific maintenance, although it is recommended to clean them periodically with a dry cloth to avoid dust accumulation and to ensure a good aesthetic appearance.
The choice of finish depends on the design of the furniture and aesthetic preferences. The white finish is ideal for a cleaner, more minimalist style, while the aluminium finish offers a modern, industrial look.
The set of side rails serves as a limit to prevent objects inside the drawer from falling over the sides, without adding extra weight or affecting the comfort of use.
They are made of steel or plastic, offering durability and an aesthetic design. They are available in white painted and aluminium painted finishes, allowing them to be combined with different styles of furniture.
Available in depths of 300 mm, 350 mm, 400 mm and 550 mm. The choice depends on the size of the drawer and the desired storage capacity.
For installation, rear and front hooks are required to fix them correctly to the drawer structure, ensuring stability and functionality.
These rails are designed for higher drawers and are recommended for use in storage systems compatible with square rails, such as the Vantage-Q model.
The Ultrabox drawer consists of two steel side ribs and drop locking slides, which give it stability and strength. It is delivered with the hitch mounted on the rib, facilitating installation.
Each drawer supports up to 25 kg load, making it ideal for kitchen, bathroom and office furniture applications where safe and sturdy storage is required.
The clamping system allows ±2 mm eccentric adjustment vertically, facilitating fine adjustments to ensure precise alignment and optimal closure.
No, the bottom of the drawer does not require machining, which simplifies the assembly process and reduces installation times.
Yes, this drawer is compatible with soft closing systems, although they are not included in the lot. For implementation, it would be necessary to purchase additional components compatible with the Ultrabox system.
Handrails serve to improve the organisation inside the drawer, preventing objects from falling over the sides and providing greater stability to the stored load.
They are made of steel with a metallic grey RAL 9022 finish, which guarantees strength, durability and a modern aesthetic that blends in well with a variety of furniture.
They have a diameter of 10 mm, which provides a balance between lightness and strength, allowing a robust structure without adding unnecessary weight to the drawer.
Each set includes two rails and two rear hooks. For proper installation, additional brackets may be required depending on the drawer model.
These rails are designed specifically for the Ultrabox drawer system, so their compatibility with other systems will depend on the dimensions and characteristics of the furniture.
The Lokbox joint is ideal for wide drawer widths where a secure bottom to border fixing is required without compromising adjustability or requiring pre-machining.
Although its load capacity depends on the design of the drawer and the border material, its fixing with expandable cleats ensures a firm and stable hold for prolonged use.
Yes, the Lokbox joint can be dismantled and reused in another drawer, provided that the expandable plugs are still in good condition and the new installation is compatible with its fixing system.
Plastic with a grey finish provides good resistance to wear and tear and moisture, as well as being a lightweight material that does not add extra weight to the drawer structure.
No specific maintenance is required, but it is recommended to periodically check the fixing of the expanding dowels and clean the surface with a dry cloth to avoid dust accumulation.
The slim rectangular siphon guard is designed to conceal the view of the siphon in bathroom furniture, optimising the interior space and preventing objects from falling out.
It can be installed in any drawer with a rear panel thickness of 16 mm and a minimum depth of 250 mm, ensuring stable and functional integration.
It is made of plastic and available in anthracite grey, grey and white finishes, allowing it to be combined with different styles of bathroom furniture.
It is easy to install by screwing it to the back of the drawer, without the need to machine the bottom, which facilitates assembly without the need for specialised tools.
The thin-walled design allows for a more aesthetic and discreet integration into the drawer, maximising interior space without adding unnecessary bulk.
The H56 siphon saver is distinguished by its reduced height of 56 mm and its thin-walled design, which allows for a more discreet and efficient integration into the interior of the drawer.
It is ideal for drawers with a reduced rear panel height of 56 mm and a panel thickness of 16 mm, and can be fitted in drawers with a minimum depth of 250 mm.
It is made of high quality plastic and is available in white, grey and anthracite grey finishes, which allows it to adapt to different styles of bathroom furniture.
It is installed by screwing it to the back of the drawer, without the need to machine the bottom. It is quick and easy to fix, without the need for specialised tools.
Its reduced height allows a better optimisation of the space in the drawer, maximising storage capacity without interfering with the structure of the furniture.
What types of light fittings can the Revosens control and at what voltage does it operate?
What functions does its integrated LCD screen offer and how are the modes managed?
What connectivity and remote control options does it offer?
How many transmitters or receivers can be linked to the system?
What is the signal range of the RF system and how is it installed?
The following video shows how you can easily assemble the Slim drawer.
The RAL code of the anthracite grey finish of the sides of the Slim kitchen, household and bathroom drawer is approximately 7043.The RAL code of the white finish of the sides of the Slim kitchen, household and bathroom drawer is approximately 9003. Although it is necessary to bear in mind that the white silk colour of said drawer is metallized and the RAL codes are for flat colours.
The square rail section of the Slim drawer measures 23 mm by 13 mm and the section with trim measures 25 mm by 15 mm.
Yes, the bottom and the back of the Slim drawer have the same measurements for both the soft closing runners and the push runners.
The minimum unit depth required to install a Slim exterior drawer with push is calculated with the formula: Minimum depth = Depth + 3 mm. In this case the minimum unit depth needed will be 500 + 3 = 503 mm.
The minimum unit depth required to install a Slim interior drawer with push is calculated with the formula: Min. depth = Depth + 12 mm. In this case the minimum unit depth needed will be 500 + 12 = 512 mm.
It is recommended to mount the guide rail synchroniser with push for the Slim drawer on units with a width of more than 600 mm.
It is recommended to mount the guide rail synchroniser with push for the Slim drawer on units with a width of maximum than 1,200 mm.
No, each drawer has a synchroniser accessory.
Yes, the Lokbox mechanism is used to fasten the bottom of the drawer to the front part without preventing adjustment of it. It is compatible with the Concept, Slim and Vantage-Q drawers or any drawer. It is especially recommended for very wide drawers used in the furnishings of kitchens, bathrooms, lounges and even inside wardrobes. However, you need to take into account that the installation dimensions change. See diagram.
The following video shows how you can easily assemble the Vantage-Q drawer.
Yes, the bottom and the back of the Vantage-Q drawer have the same measurements for both the soft closing runners and the push runners.
It is recommended to mount the guide rail synchroniser with push for the Vantage-Q drawer on units with a width of more than 600 mm.
It is recommended to mount the guide rail synchroniser with push for the Vantage-Q drawer on units with a width of maximum than 1,200 mm.
The RAL code of the white finish of the sides of the Vantage-Q kitchen drawer is approximately 9003.The RAL code of the grey finish of the sides of the Vantage-Q kitchen drawer is approximately 9006.
In order to plan the design of a kitchen drawer unit with Vantage-Q drawers, we need to bear in mind several parameters, this work is made easier with a help table to configure those units.This calculation table makes it possible to calculate the position of the guides, depending on the dimensions of the unit and the number of drawers.Also, it makes it possible to choose different heights of drawer, consequently it calculates the height of the façade of each of them within the same unit.
In order to plan the design of a kitchen drawer unit with Vantage-Q drawers, we need to bear in mind several parameters, this work is made easier with a help table to configure those units.This calculation table makes it possible to calculate the position of the guides, depending on the dimensions of the unit and the number of drawers.Also, it makes it possible to choose different heights of drawer, consequently it calculates the height of the façade of each of them within the same unit.
We have different heights of sides and accessories that make it possible to create different types of drawers.You can design inner and exterior drawers, with a large capacity for saucepans, with rounded or square rails, with inside accessories and even glass sides.
