VIT F-GW ----x---- - -- -----#

92 / 8432393241005

Product features

Documentation

Frequently asked questions


The following video shows how you can easily assemble the Vantage-Q drawer.

Yes, the soft closing for the Padplast office drawer is compatible with the 27 mm high Paddock guide rails with partial extraction and the 35 mm high Paddock guide rails with total extraction, aside from the 45 mm high Paddock guide tails with total extraction because it already has soft closing.Also, the soft closing for the Padplast office drawer is not compatible with the anti-overturn Paddock lock.

The thickness of the board required for the bottom and back of the drawer should be 16 mm to ensure a safe and stable installation.

This kit supports a maximum load of 60 kg thanks to the metal ribs and soft closing rails, which ensure stability and strength even under heavy weight.

The drawer front allows a position adjustment of ±2 mm vertically and ±1 mm horizontally, facilitating precise adjustment during installation.

The side ribs are made of anthracite grey painted steel or painted aluminium, offering high resistance to prolonged use, durability and an elegant finish that integrates perfectly into modern spaces.

Synchronised full-extension slides provide smooth and quiet gliding, allowing full access to the drawer interior, which is especially useful in kitchen and bathroom applications where optimised access is critical.

The adjustable tray can be repositioned within the organiser to ensure that the spice jars are held securely in place and at the optimum inclination for use.

The organiser holds up to 6 spice jars, keeping them safe and organised.

The slope of the organiser ensures that the jars are easily visible and accessible, allowing for quick and effortless grabbing.

Phenolic laminate offers water resistance, anti-bacterial properties and corrosion durability, ideal for use in kitchen environments.

The dimensions of the organiser (150x470mm) make it compatible with most standard kitchen drawer sizes.

The AMP extension cable is designed for 12V DC LED systems and supports a maximum power of 60W. It is ideal for connecting LED luminaires to the converter in installations requiring up to 2 metres of extension.

The AMP-type connection allows for quick and easy installation thanks to its connectors that ensure a firm and stable fit. It also minimises the risk of polarity errors, increasing the safety of the connection.

Although it is possible to extend the length using additional connectors, it should be verified that the extension does not cause a voltage drop that will affect the performance of the luminaires. It is recommended that cables of the same specification are used to maintain the integrity of the system.

The cable is made of flexible and resistant plastic with a black and red finish for easy identification of the poles. These materials ensure excellent durability and resistance to mechanical wear.

Before installation, disconnect the power supply and make sure that the positive and negative poles are correctly connected. Avoid straining the cable or exposing it to heat sources that could compromise its integrity.

The Airtop 2 Charger is compatible with all devices that support Qi wireless charging technology, such as Qi-enabled smartphones and headsets.

The charger requires a machining of D. 60 mm for installation on a flat surface, ideal for workbenches or office furniture.

Yes, the charger allows you to charge one device via the wireless cradle and another device connected to the USB Type A port simultaneously.

The charger features overheating and overcharging protection to ensure safe use while charging electronic devices.

The included power cable has a length of 1.8 metres, providing enough reach to connect the charger to a nearby power outlet.

The frame is adjustable to fit enclosure modules with an internal width of 560 mm to 594 mm, complying with 600 mm module standards.

The rods are made of aluminium with high-quality plastic finials, while the frame combines aluminium and textured plastic, ensuring durability, lightness and resistance to wear and tear.

The stability of the trouser rods is ensured by a design that allows them to fit firmly into the frame, preventing displacement during use.

The soft-close guide system provides a smooth and quiet glide, protecting garments and improving the wearing experience by avoiding jerky movements.

The kit includes an adjustable frame, seven trouser rods, a set of runners and the necessary screws. Assembly is simple, as all that is required is to fix the slides to the inside of the wardrobe and adjust the frame to the desired width.

The Flow inverted soft close allows the closing of a sliding door to be cushioned, avoiding abrupt impacts and ensuring a smooth and silent movement, ideal for applications in domestic and professional environments.

Yes, this soft close is compatible with Flow 2 sliding systems for 30 kg and 50 kg doors, offering simple and effective integration with the corresponding top and bottom profiles.

Installation requires only a 2 mm hex spanner to attach the devices to the system, facilitating quick and uncomplicated assembly.

Yes, the system is designed to be installed symmetrically on both the right and left side, adapting to different sliding door configurations.

The soft close is made of high quality steel and plastic, ensuring wear resistance, durability and reliable performance in continuous use.

The bracket with expansion screw is designed to secure the mounting of the Gola profile to the furniture module, providing a safe and strong system.

The expansion screw allows the bracket to be firmly fixed to the profile and the module, ensuring a stable and reliable installation in different configurations.

Yes, this bracket is compatible with all Gola profile systems used in kitchen units and furniture.

The bracket is made of steel with a zinc-plated finish, ensuring durability and corrosion resistance.

The packaging includes 50 units of brackets with expansion screws, ready for installation in furniture projects.

The Rhodes cabinet handle has a length of 2.3 metres, suitable for large cabinet doors.

The Rhodes handle is made from aluminium with a black painted or matt anodised finish, ensuring durability and a modern design.

Yes, the Rhodes handle can be installed both horizontally and vertically on 18 to 20 mm thick boards.

To install the Rhodes handle it is necessary to pre-machine 25x7 mm to embed the handle into the edge of the panel.

Yes, the handle includes the screws necessary for its assembly, facilitating installation in furniture.

The Sedaví handle is made of zamak with an aluminium painted finish, offering strength, durability and a modern design.

The handle has a length of 137 mm and an interaxis of 128 mm, which makes it suitable for various types of furniture.

Yes, the Sedaví handle is ideal for kitchen, bathroom, office and other spaces, thanks to its functional and aesthetic design.

Yes, it includes the necessary M4 screws to facilitate immediate installation.

The handle can be installed in either horizontal or vertical orientation, adapting to the requirements of the furniture.

The Prague handle is made of zamak, a strong and durable material that ensures a long service life.

The dimensions of the handle are 195 mm overall length and 160 mm spacing, ideal for standard sized furniture.

The handle finish is painted aluminium, offering a modern and elegant design that adapts to any style of furniture.

Yes, the handle includes M4 screws, which are necessary for quick and accurate installation.

The packaging contains 20 units of Prague handles, perfect for multiple installation projects.

The Castellón 160 handle is made of aluminium, which guarantees lightness, strength and durability.

The handle has a length of 172 mm and an interaxis of 160 mm, making it ideal for various types of furniture.

The design has a symmetrical and minimalist aesthetic, ideal for modern and elegant environments.

Yes, the handle includes M4 screws, allowing for quick and easy installation.

This model has an elegant chrome finish that gives it a shiny and aesthetic appearance.

The handles of the Torrent range are made of matt anodised aluminium, offering a modern design and high durability.

The dimensions of each handle are 120 mm in length, with an interaxis of 96 mm, suitable for multiple applications.

The set includes 10 handles and is available in matt anodised finish, ideal for kitchen, bathroom or office furniture.

M4 screws are included with each handle to ensure correct and easy installation.

Yes, the handles can be installed both horizontally and vertically, adapting to the needs of the furniture.

The Tulip1 handle is made of aluminium with a matt anodised finish.

The handle is available in lengths of 126 mm and 158 mm.

No, this handle uses a high quality self-adhesive strip that requires no machining or screws.

It is compatible with drawer fronts and cabinet doors with a minimum thickness of 19 mm.

Yes, the included adhesive is of high quality, guaranteeing a secure and long-lasting attachment to the edge of the furniture.

The Chiva handle is made of aluminium with a matt anodised finish.

It is available in lengths of 62 mm, 94 mm, 126 mm and 158 mm.

No, this model includes a high quality self-adhesive strip that requires no machining or screws for installation.

It is suitable for drawer fronts and cabinet doors with a minimum thickness of 19 mm.

Yes, the high-quality adhesive guarantees a long-lasting and secure attachment to the edge of the furniture.

The Panama knob has a diameter of 20 mm, ideal for furniture of different styles and sizes.

It is made of zamak with a chrome-plated finish, ensuring durability and elegant design.

Includes a 25 mm M4 screw, suitable for easy installation in various types of furniture.

Yes, this knob is perfect for use on kitchen, bathroom, home or office furniture.

Each knob is individually packed to avoid knocks and scratches during transport and storage.

The RAL number of the white finish on the rails and handles of the Placard sliding door system is approximately 9003. The RAL code of the anthracite grey finish is approximately 7043. The RAL code of the black finish is approximately 9011.

The Pasadena handle has a 180 mm spindle and a total length of 240 mm.

It is made of steel with a textured black finish, giving it durability and a sleek design.

Yes, it is necessary to drill holes on the outside of the door to attach the handle correctly. The design facilitates a comfortable and secure grip.

It is compatible with wooden doors between 35 and 45 mm thick, designed for sliding door systems.

The kit includes an exterior handle, mounting plate and screws, all individually packaged to prevent damage during transport.

The following video shows how you can easily assemble the Moka accessories.

The gap between the side of the module and the frame / rails of the Moka closet or dressing room interior accessories is 9mm.

Yes, you simply need to respect the minimum installation depth of the Moka runners and carry out the assembly with the clips that are supplied.

The following video shows how you can easily assemble the Hang Moka wardrobe lifts.

The side supplement of the Hang fold-down hanger is used to increase the distance between the hanger and the side of the unit, avoiding the arms of the hinges. Thanks to this supplement, you will be able to mount the Hang hanger fully integrated into your wardrobe with hinged doors.

The RAL of the finish of the accessories for inside Moka wardrobes and dressing rooms is approximately 8019.

According to the ISO: 7170:2005 standard, the bracket for circular hanging bars or round tubes can tolerate a maximum weight of 40 kg/metro uniformly spread out.

The pinless glides provide a quick solution for applications where drilling of the furniture is not desired. Thanks to their flat, self-adhesive design, they allow direct installation on the module surface, reducing assembly time and avoiding additional operations in production.

It is equipped with a high-tack acrylic technical adhesive base, capable of withstanding tensile forces in excess of 7 kg. It is effective on melamine, plywood and MDF boards with standard finish. It is recommended to be applied on clean and dry surfaces to ensure performance.

This glide is recommended for use in the bottom corners of base units, cabinet bases or on the edge of fixed legs. As it does not protrude from the furniture, it prevents accidental snagging and prolongs the durability of the adhesive even in intensive use.

Its technical polyethylene base has low friction, which allows a smooth glide on surfaces such as parquet, PVC, ceramic or vinyl. Compared to felt or rubber, it reduces sliding resistance by 30% and minimises wear.

Reuse is not recommended. The adhesive is designed for a single professional application. Once removed, it loses effectiveness and may compromise the stability of the furniture. For new installations, it should be replaced with a new unit.

The mounting system uses an M8x15 threaded bolt, designed to ensure a strong and precise attachment to the base of the furniture. This system facilitates fast and secure mounting for frequently used environments.

Each castor supports up to 35 kg, giving a total capacity of 140 kg per kit. This makes them ideal for furniture that requires mobility without compromising structural stability.

Yes, the wheels are made with a black rubber tread that ensures a smooth and quiet ride, protecting delicate surfaces such as parquet or wood flooring.

The kit contains 4 castors (2 with brakes and 2 without), together with all the screws required for mounting, providing a ready-to-install solution for any residential or professional environment.

These castors are designed for household furniture, offices, chests of drawers, wardrobes or youth furniture requiring high manoeuvrability, with the possibility of partial braking thanks to the two units with brakes included in the set.

The following video shows how you can easily assemble the abovementioned storage system in a kitchen.

All of the Shelvo racks for kitchen corner units are capable of supporting up to 20kg of weight.

The minimum door size for installing a half-moon Shelvo rack in a kitchen unit will depend on the diameter of rack chosen: - For racks of 650 mm diameter, the minimum door size is 400 mm. - For racks of 750mm diameter, the minimum door size is 450 mm.

The following video shows how you can easily assemble the abovementioned storage system in a kitchen.

The following video shows how you can easily assemble the abovementioned storage system in a kitchen.

The fastener is designed for flat glass panels with a maximum thickness of 6.5 mm. Its structure easily adapts to glass used in showcases, shelving and decorative furniture without requiring complex machining.

Installation is by screwing in, using the included retaining screw. The design ensures a firm fit of the glass thanks to the inner nut and the clamping groove which distributes the pressure evenly.

Yes, the system incorporates a 7 mm high support base and a 15 mm fixing body, which allows stable retention of the glass even in situations of slight movement, preventing slippage or vibration noises.

The transparent finish allows the fastener to be visually integrated into the furniture without altering the aesthetics of the whole. It is ideal for applications where visibility of the fastening system should be minimal or non-existent.

The product is packaged in 1000 units, facilitating its use in furniture production lines, commercial showcases and large-scale carpentry. This presentation allows to maintain efficient inventory and reduce logistic costs.

These supports can hold shelves with a maximum recommended load of up to 40 kg, complying with the UNE-EN14320:2006 standard for household and kitchen components.

The anti-slip design with rubber on the upper side of the bracket ensures a secure hold and prevents movement or slipping of the shelf, making it ideal for both glass and wood.

The matt nickel painted finish not only enhances the aesthetics of the substrate, but also offers additional protection against rust and wear, ideal for wet or heavy use environments.

They are compatible with wooden or glass shelves with thicknesses from 6 to 25 mm, which allows for great versatility in carpentry and modular furniture projects.

The system includes plastic covers that allow the screws to be completely hidden, improving the final aesthetics and offering a clean and professional finish after installation.

The zinc-plated finish provides effective protection against rust and corrosion, which is essential to ensure the durability of the joining system even in wet environments.

This plunger is optimised for 14 to 18 mm thick boards and allows precise insertion into a 7 mm diameter hole, with an overall length of 12.5 mm, facilitating its use in multiple furniture assembly formats.

The plunger acts as the bolt receiving point within the System 10 system, ensuring a firm hold in furniture structures through quick and precise insertion, without the need for special tools.

The metallic steel body offers high mechanical strength and prolongs the life of the joint assembly, making it especially useful in industrial, contract or high traffic applications.

Each presentation includes 2,000 units, making it ideal for furniture manufacturers, wholesalers and assembly lines requiring efficient, large-scale assembly solutions.

Yes, for panels of 16 mm thickness, is possible to use the module 500 mm Vantage-Q drawer.

Yes, the Vantage-Q waste container is compatible with the 18 and 19 mm Slim drawer.

The following video shows how you can easily assemble the abovementioned storage system in a kitchen.

The following video shows how you can easily assemble the profile system Gola.

The cover cap is designed to completely cover and conceal the Hook hanger once fitted, enhancing the aesthetics of the furniture without compromising access or operation of the fastening system.

No, this cover has been manufactured specifically for Hook top hanger units. Its fit is optimised for this model, ensuring perfect integration into kitchen, bathroom and household cabinets.

Yes, it is available in left and right hand versions, which allows a symmetrical and correct installation according to the position of the hanger in the cabinet.

The anthracite grey finish offers a modern and discreet appearance, ideal for combining with modern design furniture. In addition, the plastic material ensures resistance to wear and tear without visual deterioration.

The Hook hanger cover comes in packs of 200 pieces per hand (left or right), optimising its use in production lines or large-scale furniture projects.

The Hook hanger can withstand loads of up to 70 kg per module, in accordance with UNI 10767, guaranteeing safe assembly for kitchen, bathroom and home furniture.

Fixing is done by screwing from the inside of the module, which provides a stable joint. In addition, its installation allows it to be concealed with covers once assembled, improving the aesthetics of the assembly.

The hanger has a double adjustment: it allows a height adjustment of ±5 mm and a depth adjustment on the front of the module, facilitating a precise alignment of the unit with respect to the wall.

Yes, this hanger is available in left and right versions. Its combined use allows symmetrical mounting of the module, ensuring stability and efficient fixing at both ends.

Once installed, the system can be covered with customised trim covers, which hide the screws and adjustment elements, achieving a clean and discreet finish inside the cabinet.

The finishes for these supports are RAL9006 for the aluminium colour and RAL8019 for the Moka colour.

This accessory is used to connect the Albeam crossbar profile and the Albeam bumper profile on kitchen furniture.

It is available in two versions: a press-fit version and a bolt-on version, both of which allow for a firm and movement-free coupling.

The press fitting has dimensions of 26,9 mm wide × 48,5 mm high.

It is made of durable grey plastic, providing a precise fit without damaging the profiles or allowing play.

Each unit includes the fitting and is delivered in packs of 100 units. In the case of the screwed fitting, it is supplied with installation screws Ø3.5×25 mm.

The profile is installed using built-in adhesive, without the need for tools. It is essential to properly clean and fix the surface before installation to ensure optimum adhesion.

It is designed to be fixed in areas exposed to impact, such as corners, edges of low furniture or walls, preventing knocks in areas of frequent traffic or handling.

The bumper is made of semi-flexible plastic, which allows it to absorb impacts and protect surfaces without deteriorating, ideal for intensive work areas in industrial or commercial kitchens.

It has a length of 56 metres per unit. Thanks to its flexibility and direct adhesion, it can be easily cut and adapted to different sizes or corners without the need for prior machining.

It is advisable to properly prepare the surface by removing dust and debris, accurately measure the impact area and press the profile firmly into place to ensure an efficient seal.

It is very simple – the Hook brackets that fix the profile to the wall have a height regulation of ±5 mm. These brackets have two screws – one of them attaches the module to the wall, and the other regulates the height and ensures it is fully horizontal.

For proper installation, the module must have a minimum width of 900 mm, a door of 450 mm and a minimum internal depth of 490 mm. The internal height of the module must be between 620 mm and 780 mm.

This model is available in left or right hand versions and can be mounted with either a 90° arm hinge or a straight hinge. It also incorporates a soft-close system for quiet and safe sliding.

The system consists of 2 independent trays with chrome-plated round rod, each with a load capacity of 20 kg, for a total of 40 kg per complete system.

The trays have an adjustment system that allows them to be easily adjusted in height, adapting them to the end user's organisational needs.

The corner mechanism is made of chrome-plated steel and the base of the trays is made of white melamine, which offers strength and durability in kitchen environments.

The Shelvo system can be installed in corner kitchen units with a total height between 650 mm and 770 mm. It is specifically designed for 800 mm modules and allows precise adjustment thanks to its adjustable central bar.

Each tray has a diameter of 710 mm and a maximum load capacity of 20 kg. This allows small kitchen items to be stored safely, without compromising the stability of the system.

The matt anodised aluminium bar allows the trays to be fixed at two different heights according to the user's needs. In addition, it is possible to install only the lower tray or add the upper tray with positioner for a more customised configuration.

The kit includes 2 trays, 1 aluminium bar and connecting pieces. It does not require additional parts for assembly and allows easy installation without the need for special tools, making it an efficient solution for optimising space in kitchen units.

These accessories are designed to securely fix the Miniline rectangular top to the kitchen furniture, guaranteeing a precise seal that prevents displacement due to impacts and water seepage that could damage worktops.

The accessories must be positioned and secured according to the instructions in the manual. It is essential to secure each part in position to avoid any unwanted movement during daily use.

They are made of semi-flexible grey plastic, which allows an adaptable fit to all types of surfaces. This material provides resistance to deformation, durability against impacts and stability against humidity, keeping the top in position.

Each kit contains 10 fixing accessories for rectangular cups. The commercial packaging is in sets of 20 kits, and due to their size it is recommended to keep them out of the reach of children under 7 years of age.

This kit has been specifically designed for Miniline rectangular shaped codends. Its geometry, coupling type and flexibility are optimised for this model, so it is not recommended for use with other types of codends.

We would like to remind you that in the case of folding-door or hinged-door assembly, the hanger must go with the lateral supplement.

Installation requires a minimum height of 650 mm and can be adjusted up to 770 mm. The distance between shelves can be adjusted between 365 and 413 mm. These dimensions guarantee a suitable integration in kitchen units of 800 mm and 900 mm.

The central bar is fixed by means of a telescopic system with connecting pieces included in the kit, which allow it to be attached to the ceiling and base of the module. No special tools are required for assembly and instructions are included.

The trays are made of white or grey polyethylene, a recyclable, antistatic, impact and UV-resistant material. Their design guarantees long durability even in kitchens with intensive use.

The height can be adjusted manually without the need for tools. The included positioner allows the desired height to be set to suit the objects stored and the configuration of the module.

Each tray can carry up to 20 kg of distributed load, making it ideal for both domestic and commercial kitchens. Although no certification is specified, the materials and design meet common standards of professional quality and durability.

The system is designed for 800 mm and 900 mm wide modules, with a minimum internal height of 550 mm. The recommended minimum depth is 390 mm and allows installation with R325 or R375 axle, depending on the model.

Yes, the system allows partial or total extraction of the lower tray when the door is opened, improving access to the bottom of the unit and optimising ergonomics in corner units.

The system allows the trays to be installed at different heights thanks to its central bar with movable connecting pieces. This flexibility makes it possible to adapt to the content or interior design of the module, without the need for special tools.

The trays are made of recyclable polyethylene, antistatic and resistant to impact and UV rays. This composition guarantees optimum performance in demanding environments such as professional kitchens.

Each tray supports up to 20 kg distributed load. No additional reinforcement is required as long as the installation instructions included in the kit are followed.

No, it is only compatible for devices that charge using the QI protocol.

Yes, these grommets allow the most common cables and plugs, such as the F-type plug (SHUKO) and G-type plug (UK) to pass through.

It allows to pass cables and plugs type F (SHUKO), except the G-type plug (UK) due to its size.

It has dimensions of 330 x 520 mm. It is suitable for sinks of similar size or larger. It is recommended to pre-measure the inside width of the sink to ensure a proper fit.

It can hold up to 14 kg in weight, so it can be safely used for household plates, glasses, pots and pans.

Yes, it is designed to withstand extreme temperatures between -30°C and +230°C, making it suitable for use as a trivet for hot or even frozen utensils.

The flexible design with steel rods and anti-slip silicone coating allows it to rest securely on the worktop or sink without the need for additional fixings.

This model can be folded and rolled up, which optimises space when not in use. It can also be used as an auxiliary surface for cooking or defrosting, unlike the fixed models.

The bar is telescopic and adjustable in different models, with widths ranging from 450 mm to 1150 mm, depending on the selected reference.

The folding hanger can hold a maximum load of 12 kg, making it ideal for hanging clothes and other items in the wardrobe.

It is mounted on the side panels of the cabinet or cupboard. For cabinets with hinged doors, we recommend the use of the Hang side extension (codes 7085025, 7085107, 7085107 and 7085049).

It is made of steel and plastic, with finishes in chrome, mocha painted, black painted and stone grey painted, to adapt to different styles of wardrobes.

It has a soft damping system with automatic return, which makes it easy to access the higher areas of the cabinet without effort.

The V-shape allows the glass to be held securely and prevents it from moving or being damaged inside the profile.

It is made of strong, flexible plastic, which makes it easy to install and ensures optimum glass retention.

Yes, the material can be easily cut to fit the length required for the installation.

It is installed by snapping the glass into the profile and securing it with the V-shaped glazing bead.

Yes, it can be removed and reinstalled without compromising its functionality, provided that care is taken not to damage the glass or the profile.

Yes, they are compatible with Alexa and Google Home. Therefore, the RGB LED strip should be linked with the Smart Home application and this, in turn, with Alexa or Google Home.

It is compatible with 4 mm and 7 mm thick glass, ensuring a tight fit within the Plus 4 and Plus 7 profiles.

The glazing bead has 4 inner tabs that hold the glass in place without the need for additional adhesives.

Yes, it is available in black and grey, allowing it to be combined with different profile finishes.

Supplied in 2.35 m and 3.9 m bars. Yes, they can be cut to size according to the size of the glass and the profile.

No, its slim design and black or grey finishes allow for discreet integration with the profiles, without affecting the aesthetics of the whole.

This frame can support up to 30 kg of weight, ensuring a smooth and crevice-free glide.

The frame is available in 11 height options, ranging from 564 mm to 1114 mm. The minimum cabinet depth must be 480 mm.

It uses full-extension slides with soft closing, which ensures quiet sliding and avoids sudden shocks when closing.

It is made of plastic and aluminium, which provides strength, lightness and an elegant mocha-coloured finish that matches different styles of furniture.

It is delivered completely disassembled, but with all components and screws included, ready for quick and easy installation.

To ensure precise assembly, 3 mm must be subtracted from the interaxis dimension of the brackets when cutting the bar. This tolerance ensures that the bar fits without tension or play, optimising its durability and functionality.

The kit includes M5x38 mm screws, suitable for top installation in boards with sufficient thickness to thread or fasten anchors. Recommended for installation in materials such as MDF, chipboard or wood at least 16 mm thick.

They are designed for lateral fixing (left and right) and are suitable for standard bar lengths (up to 1.15 m). For longer spans or intensive use, it is recommended to combine with compatible centre brackets to avoid bending of the bar.

The brackets are available in Titanium, Black, Aluminium and Moka finishes, allowing them to be aesthetically integrated with other hardware and metal elements of the furniture. They are ideal for projects where design and functionality must be aligned.

These brackets are designed exclusively for Ø28 mm round bars. The use of bars with a different diameter (e.g. Ø25 or Ø30 mm) may cause play, misalignment or impossibility of installation, affecting both the safety and the aesthetics of the assembly.

The Mago manual machine allows you to assemble drawers quickly and efficiently, making it easy to bend the flanges of the ribs and fix them to the side of the drawer.

It uses compressed air to actuate a trigger that automatically bends the tabs of the rib, ensuring it is secured to the side flap of the drawer without the need for additional tools.

Unlike other manual methods, this machine speeds up assembly, improves accuracy and reduces physical effort, which optimises production in carpentry workshops.

It is ideal for carpentry and furniture workshops, where large volumes of drawers need to be assembled quickly and accurately.

It has no limitations on the depth or width of the drawer, as its design allows it to adapt to any size without affecting the quality of the assembly.

At Emuca, we make it easy for you. Here you can download this Excel file that will help you configure your drawer unit step by step. Simply enter the module measurements (height, thickness, overlap, etc.) and specify how many drawers you want. This file allows you to:

  • Automatically calculate the machining dimensions of the drawer fronts (H1, H2, H3...) (mm).
  • Determine the height of each drawer front (mm).
  • And obtain the machining dimensions required to manufacture the drawer fronts (X, Y) (mm).

It also includes visual representations so you can check the result and avoid errors. Ideal for carpenters, designers or DIY enthusiasts who want a practical and accurate solution.

If a warning message appears when you open the Excel file, close the file. Right-click on the downloaded file and select Properties. At the bottom of the window, tick the box Unblock. Click Apply and then OK. You can now open the file.