The X91/X92 hinge insert has a diameter of 10x11 mm and a specific height of 2 mm (or other options depending on the model). It is designed to guarantee a firm fixation by means of a clip system, which allows a perfect and easy adjustment to the hinge insert. These features ensure a precise and professional installation.

For proper installation, pre-drilling to the following specifications is required: 32 mm distance between holes. 37 mm distance from the edge of the door to the first hole. 11 mm deep holes. These dimensions ensure that the supplement fits perfectly and guarantee the stability of the hinge.

The snap-on coupling system allows quick connection without the need for additional tools. This mechanism facilitates the assembly and disassembly of the supplement, which reduces installation time. It also ensures a secure and stable fixing, minimising the risk of misalignment over time, which is not as easily achieved with traditional fixing methods such as screws.

Yes, the insert is designed to be compatible with door thicknesses from 14mm to 24mm, making it suitable for most standard furniture used in kitchens, bathrooms and other spaces.

The supplement is made of high-quality steel with nickel-plated finish (or titanium, depending on the model). These materials offer high resistance to corrosion and wear, even in wet environments such as kitchens and bathrooms. This design ensures a long service life and reliable performance, even in demanding conditions.

We have a table for calculating the weight of a door, which is necessary to know when choosing guy ropes and measurements.Depending on the material of the door, as well as its dimensions, the result will be the weight of the door (kg) that you can use to calculate to the necessary strength of the measure (Kg x cm).

Yes, the drawer measurements, including its dimensions and machining, are fully compatible.This allows customers to mount the Silver total pull-out slides with push to open function and the Silver soft-close total pull-out slides on the same drawer.However, they are not compatible with the Slippe total pull-out slides with push to open function.

The locking pivots that are mounted on the Silver guide rails are designed in order to easily fasten the drawers to the guide rails, thus preventing them from falling during transportation or handling.These pivots avoid the use of additional screws and for their assembly you only need a small hole in the side of the drawer. In this manner the drawer can be assembled and disassembled as many times as you wish.

Installation is by screwing into the sides of the Vertex drawer front panel, ensuring a firm and adjustable fixing.

The hooks are made of high quality plastic, which guarantees durability, resistance to daily use and structural stability.

The stability of the front panel is achieved thanks to the design of the latches, which provide a secure and stable fit, even under continuous load.

This product is specifically designed for 131 mm high drawers, so it is not compatible with other heights.

The white plastic is lightweight, moisture resistant and easy to clean, making it ideal for applications in domestic environments such as kitchens and bathrooms.

Yes, the soft closing for the Padplast office drawer is compatible with the 27 mm high Paddock guide rails with partial extraction and the 35 mm high Paddock guide rails with total extraction, aside from the 45 mm high Paddock guide tails with total extraction because it already has soft closing.Also, the soft closing for the Padplast office drawer is not compatible with the anti-overturn Paddock lock.

The push-opening system allows the drawer to open automatically with a slight pressure on the front, eliminating the need for handles.

These slides have a locking pivot mounted on the slide itself, ensuring that the drawer remains closed until operated.

The slides offer a vertical adjustment range of ±4.5 mm for precise drawer adjustment.

The rollers are made of delrin, a high quality material that guarantees smooth and quiet running and optimum guidance in both horizontal and vertical directions.

These full-extension slides have a maximum load capacity of 30 kg.

The synchroniser is designed for Vertex slides with Push Syncro 2 and allows synchronised opening and closing by pressing the drawer front at any point.

The bar has a maximum length of 1,200 mm and is suitable for module widths of more than 600 mm, optimising its function in wider furniture.

The bar is made of natural aluminium, which guarantees lightness, durability and corrosion resistance, making it ideal for extended opening systems.

It is recommended to use the synchroniser in drawers wider than 600 mm to guarantee a uniform and simultaneous opening of the slides.

Yes, the synchroniser includes the possibility to cut the bar to fit different module widths, offering flexibility in installation.

The Sensor LED Dot Ø16 supports a maximum power of 36 W for 12V DC luminaires and 72 W for 24V DC luminaires. Several luminaires can be connected via a single converter.

The sensor is designed for recessed installation in furniture, with an installation diameter of 16 mm. It is easily fixed using the included 6-input AMP distributor, AMP connectors and screws.

In addition to switching the luminaires on and off with a short press, the sensor allows the light intensity to be dimmed with a long press. It also includes a memory function that saves the last intensity selected.

The sensor is made of plastic with an aluminium painted finish, providing wear resistance and a discreet, elegant design. The included 1.5m cable makes it easy to install in a variety of configurations.

This product complies with safety certifications such as IP44, CE, and RoHS, ensuring splash water resistance, electromagnetic compatibility, and compliance with environmental and safety regulations.

The Polaris LED spotlight offers a power of 1.2 W and emits natural white light with a colour temperature of 4,000 K. It provides efficient and pleasant lighting, suitable for work areas and decorative use.

The spotlight has a diameter of 30 mm in its recessed area, 12.5 mm deep and 33 mm visible diameter. It requires pre-machining for recessed installation in furniture or surfaces.

Its matt anodised aluminium construction provides corrosion resistance, durability and a modern design that blends in perfectly with different styles of furniture.

The spotlight illuminates an area range of 1.25 metres, making it ideal for applications in kitchens, bathrooms, showcases and work areas where spot and uniform illumination is required.

The package includes 6 units of LED spotlights, each with a 1.5 metre connection cable, plus the necessary components for mounting and installation. This makes it easy to use in projects that require multiple light points.

We have a table for calculating the pistons or dampners, where you can obtain a response with the furniture data.The choice will depend on the width and the height of the door, as well as the material it is manufactured out of, in addition to the stroke of the piston or damper itself.The result will be the number of pistons or dampners and the necessary strength of each one.

For the same force required in both folding and lift up doors, we recommend that you only use a single piston or damper in a door with a width of less than 450 mm, and that you use two pistons or dampers for a door that is wider than 450 mm.

Yes, they are compatible with all the accessories.Please note: Lynx Premium and Basic LED strips of 4.8 W/m, 9.6 W/m and 14.4 W/m are 8 mm wide, while the Lynx Premium LED strip of 28.8 W/m is 10 mm wide.

With this table you can calculate the total power of an LED strip.

The maximum recommended length of the installation of LED strips is indicated in our catalogue with a symbol on each LED strip.The table outlines the maximum recommended length if the power supply is only provided via one length (a converter). It also outlines the maximum recommended length if the power supply is provided via both ends (two converters) that multiply by two.Please note: To power the strip via both ends you need to create a special connection. Look up how can to ensure that the LED strip has the same brightness all along it.

The Plugy USB connector requires a 25 mm diameter machining in the cabinet for proper installation.

USB Type A and Type C ports allow you to charge electronic devices such as phones, tablets and other devices compatible with Fast Charge 3.0, with a maximum power output of up to 20W.

Yes, it is compatible with 24V DC power systems. Requires a 24V DC to 36W or 30W converter, depending on the configuration installed.

No, the power adapter required for operation is not included in the package and must be purchased separately.

It is available in black painted plastic and painted aluminium finishes, offering high wear resistance and a modern design for different furniture styles.

In order to choose the correct converted for an LED strip it is necessary to: - Know the type of converter that corresponds to the LED strip. In our catalogue we indicate on each light the type of converter or transformer that must be used with a series of icons. - Find out the total power required of the converter (6 W, 15 W, 30W, 50W, 72W, 100W, 200W). In order to calculate the power of a specific length of strip, it is necessary to know what the total power of the 5m roll is (our sale unit) and what is the length of it that we need for installation. For example:If a 5 m strip (a roll) has a power of 24 W and I need will be for the installation a 2 m strip: X= (2m x 24W) / 5m = 9,6W Therefore, I will choose the 15W converter. Attention, it is necessary to add up the consumption amounts of the different strip accessories if they are included in the fitting.

Lynx Premium COB LED strip provides uniform illumination with no visible LED spots, ideal for creating continuous lines of light in decorative and functional applications.

The strip requires a 12V DC LED converter for operation, as it is not included in the scope of delivery.

The LED strip can be cut into segments every 25 mm, making it easy to customise according to the available space and installation.

It is available in colour temperatures of 6,000K (cool white) and 2,700K (warm white), allowing it to adapt to different environments.

It is manufactured on a double-layer PCB and equipped with 3M® 300LSE adhesive tape, which guarantees excellent adhesion to different surfaces and high durability.

The Lynx Q LED cable supports a maximum load capacity of 12V DC - 3A (36W Max) and 24V DC - 3A (72W Max) and is compatible with MiniLED connections.

This cable is designed with reduced dimensions to join 8 mm wide LED strips, ensuring a perfect fit and functionality.

Its length is 1.5 m, which facilitates installation in different configurations, providing flexibility in lighting projects.

The built-in connector allows for quick, easy and secure connection, reducing installation time and eliminating the need for additional tools.

Yes, Lynx Q cable is fully compatible with Lynx W profiles and similar LED lighting systems, ensuring versatility in projects.

This converter has a maximum power of 60W with 12V DC output, distributed among its 6 MiniLED outputs, allowing multiple LED devices to be connected simultaneously.

The converter is designed with IP20 protection, ideal for dry areas, and features an efficient power factor that optimises energy consumption in lighting projects.

It is compatible with Type C plugs and IEC 60320 C7 connectors, offering flexibility in connection via its 2 metre power cable. It also allows other cables for different plugs to be connected.

With compact dimensions of only 16.5 mm thick, the converter can be easily concealed in narrow areas or behind furniture, maximising the available space.

It incorporates protection against overloads, electrical interference and short circuits, ensuring safe and stable operation, even in heavy use scenarios.

The sensor uses infrared technology with a detection range of 5 cm, offering precise, non-contact activation.

It is ideal for applications in panels, headboards, kitchen furniture and different rooms in the home, thanks to its versatile and compact design.

Installation requires a Ø8 mm drill hole in the surface of the material. Includes a 2.5 m cable and a 6-input MiniLED distributor for easy mounting.

Supports 12V DC and 24V DC voltages, with a maximum power of 36W or 72W, depending on the connected LED system.

It is protected against electrical and electromagnetic interference, ensuring stable operation even in environments with high levels of electrical noise.

The sensor dims with a short press to switch the luminaires on/off and a long press to adjust the light level.

Installation requires a Ø12 mm drill hole in the furniture. Includes a 1.5 m cable and a 6-input MiniLED distributor.

It supports 12V DC and 24V DC voltages, with maximum power ratings of 36W for 12V and 72W for 24V.

Yes, the sensor has a memory function that saves the last set intensity after switching it off.

It is ideal for panels, headboards and furniture in general, integrating perfectly in different rooms of the home.

The sensor requires an installation diameter of 14 mm to be recessed in the furniture.

Yes, it includes a blue LED light that makes it easy to locate the sensor in the dark.

12V DC or 24V DC luminaires can be connected, with maximum wattages of 36W (12V) and 72W (24V).

Dimming is activated by a short press to switch on/off and a long press to adjust the light level.

The sensor complies with IP44 protection measures and is designed for low power consumption, ensuring safety and efficiency.

The sensor is compatible with 8mm wide LED strips operating at 12V DC or 24V DC.

The control is done by a short press to switch on/off and a long press to adjust the light intensity level.

Yes, it includes a mechanical switch to turn the blue LED beacon on or off if you do not want it to be active.

The sensor is designed for 8 mm wide LED strips, ideal for integration into Lynx W profiles.

The integrated connector allows a fast, safe and efficient connection, facilitating the installation of LED strips.

The sensor automatically switches the light on when it detects movement of a human body within its detection range and switches it off after 30 seconds without detection.

Detects motion in a range adjusted to human movement, ideal for profile and furniture applications.

The light remains on for 30 seconds after motion detection ceases.

It is compatible with 8 mm wide LED strips for both 12V DC and 24V DC systems.

Includes a motion sensor, a MINILED distributor with 6 inputs, screws and a 1.5 m cable with Miniled connection.

The distributor cable allows up to 6 LED luminaires to be connected and managed simultaneously via a single 12V or 24V sensor.

It uses a Miniled connection, ideal for LED lighting systems compatible with this type of connection.

Yes, it is fully compatible with Miniled sensors operating on 12V DC and 24V DC.

The cable is 10 cm long, making it easy to connect several luminaires to a single sensor output.

The kit includes 1 distribution cable with 6 outlets and 1 inlet with Miniled connection, made of plastic with black finish.

Yes, the Pyxis luminaire can be cut and connected to each LED individually, allowing it to be adjusted to the length required for the project.

Requires pre-machining to embed it into the surface of the furniture, ensuring aesthetic and functional integration.

No, the LED converter is not included in the scope of delivery, but is necessary for operation (24V DC).

The luminaire includes 1 LED luminaire, 4 mounting clips, a 1.5 m cable with Miniled connection and a cover cap.

The Miniled connection cable has a length of 1.5 metres, ideal for easy installation.

The kit includes a cable with side cover, a 1.5 metre Miniled connector, a single cover cap and 3 mounting clips.

Yes, this kit is designed to be compatible with the Pyxis luminaire by cutting and adjusting its length according to the needs of the project.

The side cover with Miniled connector allows a quick and safe connection to the 24V DC converter, facilitating the mounting and integration of the luminaire.

Yes, the kit includes mounting clips and all necessary accessories to complete the installation.

The accessories are made of durable plastic, available in black or grey finishes to match the design of the space.

This will depend on the power consumption of each connected LED luminaire, but in total should not exceed a maximum power of 200W.

Yes, this transformer is designed with an overheating, overload and short-circuit protection system to ensure safe operation.

The distributor has 6 outputs for quick and easy connection of LED luminaires via MINILED connectors.

Yes, the transformer is equipped with an interchangeable cable that allows you to connect a different type of cable depending on the plug required in the target market.

No, this transformer is designed for indoor use or dry areas (IP20). For wet areas, a transformer with a higher protection rating is required.

The Plugy USB connector is designed to be recessed into furniture, offering a discreet and functional solution for charging electronic devices such as smartphones and tablets.

It has two USB Type A ports with a combined output of up to 3.40A or 1.70A per port, with a total power of 30W.

For installation, a 25 mm diameter cut-out is required in the cabinet and a 12V DC and 30W constant voltage converter is required for operation.

It is ideal for charging a wide variety of electronic devices such as mobile phones, tablets and other USB-powered equipment.

The kit includes a USB connector with two type A ports, fixing screws and everything you need for easy installation.

To install the Spot LED spotlight it is necessary to drill an 8 mm diameter hole in the furniture.

This LED spotlight has a power of 0.3W and emits cool white light with a temperature of 6,000K, ideal for highlighting indoor or outdoor areas of furniture.

Yes, this spotlight requires a constant voltage LED converter for proper operation.

It is suitable for both indoor and outdoor furniture, integrating perfectly into modern furniture designs thanks to its chrome finish.

The package includes 1 small LED luminaire and a 0.5 m long cable for easy installation.

The Lynx Z LED L-junction is compatible with 8mm wide SMD, COB and SOB LED strips in both 12V DC and 24V DC.

This accessory allows LED strips to be connected at a 90° angle, offering solutions for corners or specific designs.

It supports up to 5A of current throughput, reaching power ratings of 60W in 12V DC systems and 120W in 24V DC systems.

It is made of transparent plastic, which avoids the generation of dark areas and improves the aesthetics of the assembly. In addition, it includes a metal lock that secures the connection and withstands high tensile forces without disconnecting.

The package contains 1 L-joint specifically designed for easy corner connections of LED lighting systems.

This fixture is compatible with 8mm wide SMD, COB and SOB LED strips, operating on 12V DC and 24V DC systems.

It allows different shapes with bending angles from 0° to 180°, facilitating its use in complex installations or corners.

The cable supports a current throughput of up to 5A, reaching power ratings of 60W at 12V DC and 120W at 24V DC.

It stands out for its metal lock, which secures the connection to prevent disconnection, and its transparent plastic construction, which eliminates areas of darkness. In addition, it has a 50 mm long cable with differentiated colours to identify polarities.

The package includes 1 x 50mm flexible Lynx Z LED cable, ready to be used for LED strip installation.

The I-connector is specifically designed to join 24V DC Pyxis LED luminaires, facilitating installation in linear configurations.

It allows the creation of longer luminaires by making use of surplus lengths of up to 5 metres.

Its self-sealing design and metal connectors ensure a solid and stable connection, preventing slippage within the profile and guaranteeing the passage of current from one luminaire to another.

It is made of transparent plastic and metal connectors. The transparent plastic maximises the luminous flux at the junction, while the metal connectors ensure efficient current transmission.

No, its transparent plastic construction means that the passage of light at the joints is not affected, guaranteeing uniform illumination.

The L connector is ideal for applications that require creating 90° angled junctions with the Pyxis 24V DC LED luminaire, perfect for perimeter lighting or corner designs.

It is necessary to cut the profiles at 45° mitres to ensure a perfect fit at 90° joints.

Allows luminaires up to 5 metres in length to be connected, optimising installation in angled designs.

It is made of transparent plastic with metal connectors. The transparent plastic optimises the passage of light, while the metal connectors ensure efficient current transmission.

No, the transparent design of the connector allows a uniform luminous flux to be maintained at the corner joints, maximising aesthetics and functionality.

Our LED converters do not have the necessary characteristics to work together with dimmers in the primary voltage (110 ~ 240V AC, 50 ~ 60Hz).However, we do have devices that can regulate the intensity (dimmer) in the secondary voltage (12V-24V DC). These can be:- Lynx switch/dimmer (cod. 5203620). - Spirit switch/dimmer (cod. 5022617). - Micron switch/dimmer (cod. 5053125). - Dot switch/dimmer (cod. 50228).

The following video shows how you can easily install the aforementioned LED lighting.

The following video shows how you can easily install the aforementioned LED lighting.

The Gola Top profile facilitates the opening of handle-free doors, providing a modern and minimalist aesthetic.

Yes, the Gola Top profile is designed to fit 16 mm and 19 mm thick boards, ensuring its versatility.

It is made of high quality aluminium with a white painted finish, guaranteeing durability and resistance.

The Gola Top profile has a length of 2.35 metres and an elongated design with an outer overhang of 18 mm.

The packaging includes a Gola Top profile, ideal for completing the Gola system in kitchen furniture.

The Optima Vantage cutlery tray is compatible with standard width module drawers of 600 mm and 900 mm, with a depth of 500 mm and 16 mm thick board.

Yes, the Optima Vantage cutlery tray can be easily trimmed to fit the specific dimensions of the drawer, providing a customised installation.

It is made of high-quality, hard-wearing grey plastic, designed for durability and ease of cleaning.

Yes, the material used in the cutlery tray is resistant to moisture and daily wear and tear, ensuring longevity in kitchen environments.

The cutlery tray design includes a precise fit to keep it stable inside the drawer, preventing movement during use.

The Optima Universal cutlery tray is compatible with drawer modules between 400 mm and 900 mm wide, with depths between 450 mm and 500 mm and board thicknesses between 16 mm and 19 mm.

Yes, the Optima Universal cutlery tray can be cut to fit depths between 449 mm and 482 mm and widths between 360 mm and 336 mm, allowing a customised installation according to the dimensions of the drawer.

The cutlery tray is made of high-quality grey plastic, which guarantees durability, strength and easy cleaning in daily use.

The cutlery tray has compartments designed to store knives, spoons, forks and other kitchen utensils, maximising the space inside the drawer.

The design of the Optima Universal cutlery tray allows for a precise fit inside the drawer, ensuring it stays in place even during frequent use.

The following video shows how the sliding door system for wardrobes is assembled.

In order to secure the rails of the Space + sliding door system, it is recommendable to use 4 x 25 mm screws (code 5032505) for 16, 18 and 19 mm units.

The SOB Free-cut 8x3mm LED strip has a high-strength 3M® double-sided adhesive, ideal for installation on flat, clean surfaces. Application on aluminium, lacquered wood, glass or non-porous surfaces is recommended to ensure optimal fixation. For rough or textured surfaces, the use of aluminium profiles with structural adhesive is suggested.

The LED strip can be cut every 6.9 mm without affecting its operation. For connection, we recommend using Lynx-Z Miniled cable, which allows for a secure connection without the need for soldering. This minimises material waste and facilitates installation in confined spaces.

It complies with IP20 safety regulations, which means that it is protected against solid objects larger than 12.5 mm, but not against liquids. In addition, its silicone-coated SMD LED technology guarantees thermal stability and reduced UV emission, contributing to the safety of its installation in furniture and indoor spaces.

The SOB Free-cut 8x3mm LED strip offers a power of 9.6 W/m with a luminous flux of 1240 lm/m. It is available in two colour temperatures: neutral white 4000K and warm white 2700K, which allows it to adapt to different environments and applications in furniture and decorative lighting.

Yes, the SOB Free-cut 8x3mm LED strip is compatible with connectors and sensors (not included in the package) that allow on/off control and light intensity regulation. The use of compatible controllers with 24V DC power supply is recommended to ensure optimal performance.

The MiniSOB 4.5x3mm LED Strip includes a 3M® double-sided adhesive, designed to guarantee a secure installation on flat, clean surfaces such as aluminium, lacquered wood and glass. For rough or textured surfaces, the use of aluminium profiles is recommended to improve adhesion and dissipate heat.

The strip is supplied in lengths of 1m, 3m and 5m, all with a 1.5m power cable at both ends and Miniled connectors. This allows the strip to be cut to the necessary length and both ends reused without wasting material, facilitating installation in confined spaces.

This strip is IP65 certified, meaning it is protected against dust and low-pressure water jets, making it suitable for installation in kitchen cabinets, bathrooms and other areas at risk of splashing. It is not submersible and should be installed in areas without direct exposure to excessive moisture.

The MiniSOB 4.5x3mm LED Strip has a power rating of 7.2 W/m and a luminous flux of approximately 720 lm/m, ensuring uniform illumination without visible points of light. It is available in two colour temperatures: -Neutral white (4000K): ideal for functional and modern environments. -Warm white (2700K): recommended for cosy and decorative environments.

Yes, the LED strip is compatible with connectors and sensors, except Lynx sensors. To regulate the intensity, the use of 24V DC controllers is recommended, ensuring optimal operation and greater control over the lighting.

This system acts as a closing damper for sliding doors, reducing the impact at the end of the run and ensuring a smooth and controlled movement without bouncing or sudden bumps. Ideal for protecting both the doors and the cabinet structure.

It is designed to integrate with Emuca's Space system overhead trolley system. It attaches easily to the mechanism without the need for additional machining.

The kit is optimised for doors up to 50 kg per door leaf. If a higher capacity is required, the reinforced version for 85 kg should be chosen.

No. The design of the brake allows it to be activated by the natural movement of the door, so it is not necessary to place the door in a specific area for the brake to act correctly.

The packaging includes 4 parts (2 activation brakes + 2 anchor brakes) and is prepared for 2 sliding doors. The system is also available in versions for 3 doors and different load ranges (25, 50 and 85 kg).

It fits the 23 mm, 30 mm and 35 mm outer carriages of the Space sliding system, adapting perfectly to their dimensions without interfering with the sliding system.

Its function is to block the entry of dust from the top between the door and the frame, improving interior cleanliness and increasing the durability of the system.

The installation is done by means of a double-sided adhesive tape included, which allows it to be easily fixed to the upper edge of the exterior doors, without the need for machining.

It is made of natural anodised aluminium, which guarantees high corrosion resistance, uniform aesthetics and compatibility with Space system profiles.

Available in lengths of 900 mm and 1350 mm. The choice depends on the width of the outer leaf; for doors larger than 900 mm, the 1350 mm version is recommended to cover the entire top edge.

The Space top track is inserted into a 17.7 mm wide groove. This housing allows the profile to be fixed stably and allows the system to slide without interference. No additional fastenings are required if the appropriate machining is carried out.

This track is specifically designed for Emuca Space sliding doors. It is recommended for use in conjunction with the upper and lower carriages, guides and brakes of the same system to ensure optimum, deviation-free operation.

The natural aluminium finish offers clean, professional aesthetics, high corrosion resistance and excellent mechanical durability. In addition, its low weight makes it easy to cut and install for industrial projects or customised workshop work.

The rail is supplied in lengths of 2.35 metres and is packaged in packs of 8 units. This format is designed for easy storage, transport and application in mass production projects or professional installations.

Yes, the Space top track is designed to integrate Space system brakes. Assembly is simple and is carried out on the same track, without the need for additional machining, allowing smooth and controlled closing of the sliding doors.

This system is compatible with sliding cabinet doors using the Emuca Space system in both 2- and 3-leaf configurations. Doors must have the Space system specific top track to properly accommodate the brakes.

The brake engages in the upper profile and acts on the carriage, damping the final movement of the door and holding it in a fixed position. This reduces impact, prevents bouncing and improves safety and closing comfort, especially in frequently used furniture.

No, the system is designed for installation without additional machining. The brake is installed directly on the top rail of the Space system and acts by pressure on the carriage. It is supplied with screws and Allen key for uncomplicated fitting.

Yes, it is essential to have the Space system specific top track and the corresponding carriages. The brake kit cannot be installed in isolation, as it needs to interact mechanically with these components to function properly.

To fix the rails of the Space+ sliding door system, we recommend using 4 x 25 mm screws (code 5032505) for 16, 18 and 19 mm modules.

The Twofold system is ideal for small spaces or where full access to the interior of the unit is required without taking up front surface area, such as in laundry cupboards, pantries, hidden shelving or compact office furniture.

The integration of the hinges into the carriage itself allows perfect alignment between the leaves, reduces the amount of hardware required and improves the stability of the assembly, facilitating faster and more precise installation.

It is advisable to provide a minimum depth of 325 mm, to use boards of high dimensional stability and to respect the necessary margin between the door and the side of the module to allow correct folding and sliding without friction.

Yes, the system allows the leaves to be disassembled by releasing the trolley, which is very useful in projects requiring maintenance, transport or replacement of components. The modular design facilitates intervention without disassembling the entire module.

Periodically check the tightness of the hinges, apply dry lubricant to the bearings if noise is detected and make sure that there are no particles on the sliding guide. Avoid using abrasive products on the nickel-plated finish of the carriage.

The undercarriage acts as a support and stabilisation point for folding door leaves. Its design with 4 cascading wheels distributes the weight better, prevents door wobbling and provides a more controlled opening and closing movement.

It is especially recommended for higher doors, less rigid structures or where a firmer and more controlled opening is required. It is also essential when the system is mounted without an external bottom guide, as it provides internal support without the need for a visible channel.

The trolley can be installed with concealed recessing in the base of the module, allowing it to maintain a clean aesthetic without visible elements. This feature makes it an excellent choice for modern, integrated or minimalist furniture.

The system is designed to operate on flat, rigid surfaces. It is recommended to avoid uneven floors or low density bases that may cause play or vibration. A well levelled base significantly improves the sliding accuracy.

It is recommended to clean the raceway regularly and check the condition of the wheels. No lubricant is necessary if kept free of debris. For heavy duty installations, it is advisable to check the tightness of the anchorage every 12 months.

The Twofold central hinge is made of high-strength technical plastic, which allows for quicker assembly without complex machining. It also reduces the overall weight of the assembly, improves the aesthetics of the enclosure interior and maintains excellent durability in heavy-duty applications.

Yes, the screw fixing design allows micro-adjustments to be made to the alignment after the doors have been fitted. This makes it easy to correct any deviations, even after initial assembly, without dismantling the entire system.

The hinge should be mounted with the long side towards the upper leaf to facilitate the natural rotation of the assembly when opening and folding. Incorrect positioning can lead to blockages or unnecessary stress on the hinge. It is important to follow the recommended orientation for smooth folding.

On tall or heavy doors, the centre hinge can be supplemented with magnetic stops or concealed dampers to assist closing. It is also possible to add a second intermediate fixing point or use the optional metal hinge when a more rigid connection is required.

No lubrication is required. Periodic cleaning with a dry cloth is sufficient to prevent dust accumulation in the joint area. It is recommended to check the tightness of screws at least once a year in frequently used installations.

This track is specifically designed to be fixed to the ceiling of the enclosure from below, acting as a top guide without the need for complex machining. Its design allows clean integration into tall modules, offering greater stability in folding doors without encroaching on usable space.

It is recommended to use Ø3.5x15 mm countersunk screws, evenly distributed along the rail. It is important to fix the profile on a solid board surface or internal reinforcements, avoiding areas with pre-drilled holes that could weaken the anchorage.

Yes, thanks to its straight profile and ceiling mounting, it allows the integration of LED strips on the sides of the enclosure without interference. It can also be combined with automatic opening sensors to activate the lighting when the folding doors are unfolded.

The matt anodising provides greater resistance to corrosion and friction wear, maintaining a professional aesthetic even with intensive use. It is ideal for furniture in demanding environments such as kitchens, offices or contract projects where durability is key.

Yes, the profile can be cut with suitable tools such as a mitre saw with an aluminium disc. After cutting, it is recommended to remove burrs to protect the wheels of the Twofold system and to maintain a smooth, blockage-free glide.

This system complies with the European standards UNE-EN 12520:2016 and UNE-EN 14749:2016+A1:2022 in terms of stability, durability and safety for domestic and professional furniture.

Yes, thanks to the double base design (fastening and recessing), they can be used both in modules with a continuous base and with plinths with edge or side fastening by means of a clip, offering high compatibility.

The Bone foot allows a height adjustment from 98 mm to 140 mm by means of an integrated thread. Adjustment can be made even after assembly using a spanner or tube from the inside.

For fixing to metal profiles, a tightening torque of 6-8 Nm is recommended using an M10 screw with self-locking nut or threaded rivet, guaranteeing firmness without deforming the technical polymer.

Yes, the high density ABS plastic base resists moisture and can be integrated with rubber anti-vibration bases or raised PVC bases, ideal for use in industrial kitchens or wet laboratories.

The direct mounting base allows faster installation by dispensing with the socket, reducing costs and assembly times. It offers direct attachment to the module with greater stability thanks to its large support surface and reinforced holes for Ø4 mm and Ø4.5 mm screws.

This base is specifically designed for 135 mm diameter Bone feet. The stretched circular coupling Ø11 mm high and Ø12.75 mm in diameter guarantees a perfect fit without the need for additional adapters.

Yes, the flat geometry and small dimensions of the base allow it to be used both on mechanised floors and in grooves for the integration of levellers. It is recommended to secure the anchorage by means of the four fixing points provided.

Thanks to its design with an additional central fixing hole, this base provides a firmer anchorage, minimising the risk of shifting or tilting in heavy or frequently moving furniture, such as industrial kitchen units or hotel installations.

The use of Ø4 or Ø4.5 mm wood screws with a length of at least 16 mm is recommended. To ensure a firm hold, it is recommended to screw with a torque-controlled electric screwdriver at low speed to avoid damaging the ABS plastic.

The Ledown leveller offers an adjustment capacity of up to 25 mm by means of an Allen key no. 4. This allows it to absorb manufacturing tolerances or floor irregularities, without altering the external aesthetics of the module thanks to its completely concealed installation.

Cylindrical machining with a diameter of Ø12 mm and a depth of at least 16 mm is recommended. The body of the levelling device is pressed into the side and rests on the lower base of the side, which ensures a direct load transmission.

Adjustment is made from the underside of the furniture using a standard Allen key no. 4. This system facilitates fine adjustment once the furniture has been installed, without the need to remove plinths or front panels.

Yes, its design allows adjustment from inside the plinth by means of a through hole or side recess. It is especially useful in kitchens or bathroom furniture where total concealment and accessibility from service areas is required.

Each leveller supports up to 250 kg. It is made of steel and zinc plated zamak, which ensures mechanical strength, dimensional stability and protection against corrosion in wet or exposed environments.

According to the ISO: 7170:2005 standard, the bracket for circular hanging bars or round tubes can tolerate a maximum weight of 40 kg/metro uniformly spread out.

The pinless glides provide a quick solution for applications where drilling of the furniture is not desired. Thanks to their flat, self-adhesive design, they allow direct installation on the module surface, reducing assembly time and avoiding additional operations in production.

It is equipped with a high-tack acrylic technical adhesive base, capable of withstanding tensile forces in excess of 7 kg. It is effective on melamine, plywood and MDF boards with standard finish. It is recommended to be applied on clean and dry surfaces to ensure performance.

This glide is recommended for use in the bottom corners of base units, cabinet bases or on the edge of fixed legs. As it does not protrude from the furniture, it prevents accidental snagging and prolongs the durability of the adhesive even in intensive use.

Its technical polyethylene base has low friction, which allows a smooth glide on surfaces such as parquet, PVC, ceramic or vinyl. Compared to felt or rubber, it reduces sliding resistance by 30% and minimises wear.

Reuse is not recommended. The adhesive is designed for a single professional application. Once removed, it loses effectiveness and may compromise the stability of the furniture. For new installations, it should be replaced with a new unit.

This lot contains wood strands with a diameter of 8 mm and a length of 35 mm, suitable for press joints in wooden boards.

Yes, it is essential to pre-drill both in diameter and depth to ensure a precise and effective connection between the pieces of wood.

The strands are made of beech wood, known for its hardness and excellent mechanical behaviour in glue joints for professional carpentry applications.

These tufts are designed for pressure bonding, where the application of glue in the bore and in the tuft ensures a firm fixation, without the need for screws.

They are ideal for assemblies in furniture, cabinets, kitchen units, solid wood structures or panels where an invisible, strong and durable joint is required.

The RAL code of the white finish of the Optima cutlery holder is approximately 9003. The RAL code of the grey finish of the Optima cutlery holder is approximately 7001. The RAL code of the anthracite grey finish of the Optima cutlery holder is approximately 7043.

We have an anti-slip mat that is supplied in rolls that are easy to cut to any inside measurement of the drawer. This mat has two roles:It prevents objects moving inside the drawer when it is opened or closed.It prevents the bottom of the drawer being damaged with a graze or little knock when handling objects stored in the drawer.

The RAL code of the white finish of the profiles system Gola is approximately 9003.The RAL code of the anthracite grey finish of the the profiles system Gola is approximately 7043.The RAL code of the black finish is approximately 9011.

The following video shows how you can easily assemble the Vertex inner drawer.

The double-jointed design allows for variable angle joints in wood panels, adapting to multiple assembly configurations. This makes it ideal for custom assemblies or structures with non-orthogonal inclinations.

This bolt has been specifically designed to work with the components of the 10 mm hitch system, such as the corresponding plungers and bolts, ensuring a secure, aligned and robust assembly.

Manufactured from turned steel with a zinc plated finish, it offers high mechanical strength and excellent protection against rust and corrosion, making it a reliable choice for industrial applications and professional carpentry.

The bolt body has a diameter of 7 mm and a total length of 89 mm. The joint is located right in the middle, facilitating precise installation with fixing points at both ends.

It comes in packs of 500 units, which allows an optimum supply in medium volume projects, reducing supply time and facilitating management in warehouses or workshops.

The maximum dimensions per door are 2400 high and 500 wide (per door leaf).

The Twofold system offers the versatility of sliding well when assembled with and without a lower guide. Whether it is used depends on the type of wardrobe in which the system is mounted.

The finishes for these supports are RAL9006 for the aluminium colour and RAL8019 for the Moka colour.

The following video shows how the sliding door system for wardrobes is assembled.

The following video shows how you can easily install the Zero system.

This M6 screw has a Ø14 mm head with cross milling, which allows an excellent fit with standard Phillips tools. This design ensures effective torque transmission and quick installation without slippage.

Thanks to its metric thread and nickel-plated steel construction, this screw is designed for joining boards from the outside. It is ideal for visible joints in home or office furniture where a sturdy and aesthetically pleasing fastening is required.

The M6 screw is available in lengths of 14 mm, 20 mm, 22 mm, 25 mm, 30 mm, 35 mm, 40 mm, 50 mm and 60 mm, adapting to different board thicknesses and jointing requirements. The 20 mm model is a versatile option for standard joints.

The nickel-plated finish provides high resistance to corrosion and oxidation, extending the life of the screw even in wet or high exposure environments. It also enhances the aesthetics of the screw, giving it a shiny, professional finish.

This screw is ideal for professional carpentry, assembly of modular furniture, demountable structures and all types of assemblies where a strong fixing from the outside is required without compromising the design of the furniture.

It depends on the type of front panel you use for the interior drawer:- Aluminium front. This is fitted onto guides at the usual distance, 37 mm in the 4th hole of the guide.- Particle board front. The thickness of this board must be added to the 37 mm of the 4th hole of the guide.In other words, if the front is 19 mm thick, the guide must be fastened at 37 + 19 = 56 mm at the 4th hole of the guide.

The following video shows how you can easily install the Zero system.

The most common practice is to place the lateral hinges in alignment with the central ones. However, for closets with really heavy doors, two of the concealed hinges can be placed at the top of the closet to increase resistance and stability.

These accessories are designed to securely fix the Miniline rectangular top to the kitchen furniture, guaranteeing a precise seal that prevents displacement due to impacts and water seepage that could damage worktops.

The accessories must be positioned and secured according to the instructions in the manual. It is essential to secure each part in position to avoid any unwanted movement during daily use.

They are made of semi-flexible grey plastic, which allows an adaptable fit to all types of surfaces. This material provides resistance to deformation, durability against impacts and stability against humidity, keeping the top in position.

Each kit contains 10 fixing accessories for rectangular cups. The commercial packaging is in sets of 20 kits, and due to their size it is recommended to keep them out of the reach of children under 7 years of age.

This kit has been specifically designed for Miniline rectangular shaped codends. Its geometry, coupling type and flexibility are optimised for this model, so it is not recommended for use with other types of codends.

The V-shape allows the glass to be held securely and prevents it from moving or being damaged inside the profile.

It is made of strong, flexible plastic, which makes it easy to install and ensures optimum glass retention.

Yes, the material can be easily cut to fit the length required for the installation.

It is installed by snapping the glass into the profile and securing it with the V-shaped glazing bead.

Yes, it can be removed and reinstalled without compromising its functionality, provided that care is taken not to damage the glass or the profile.

To ensure precise assembly, 3 mm must be subtracted from the interaxis dimension of the brackets when cutting the bar. This tolerance ensures that the bar fits without tension or play, optimising its durability and functionality.

The kit includes M5x38 mm screws, suitable for top installation in boards with sufficient thickness to thread or fasten anchors. Recommended for installation in materials such as MDF, chipboard or wood at least 16 mm thick.

They are designed for lateral fixing (left and right) and are suitable for standard bar lengths (up to 1.15 m). For longer spans or intensive use, it is recommended to combine with compatible centre brackets to avoid bending of the bar.

The brackets are available in Titanium, Black, Aluminium and Moka finishes, allowing them to be aesthetically integrated with other hardware and metal elements of the furniture. They are ideal for projects where design and functionality must be aligned.

These brackets are designed exclusively for Ø28 mm round bars. The use of bars with a different diameter (e.g. Ø25 or Ø30 mm) may cause play, misalignment or impossibility of installation, affecting both the safety and the aesthetics of the assembly.

This kit is designed to assemble 3 wooden shelves and 1 additional module, and includes: 3 sets of shelf supports, 1 set of module supports, 16 screws Ø3.5x16 mm, 16 cover caps, Assembly instructions. Profiles, boards and modules are not included.

Zero profiles and compatible wooden or module shelves must be purchased separately. The recommended profile codes are: 7023649 (stone grey), 7023749 (textured black).

Yes, the Zero system allows adjustment without tools or disassembly. The position of the shelves or module can be easily moved and repositioned, making it ideal for flexible or reconfigurable installations.

The kit is compatible with wooden or melamine shelves and modules, as long as they have the appropriate dimensions and machining to integrate with Zero profiles. The assembly is carried out directly on the profile without additional drilling.

It is available in stone grey (RAL 7048) and textured black (RAL 9005). Both finishes are designed to visually and functionally integrate with Zero profiles in the same colour, ensuring a consistent and professional aesthetic.

The included bar is 1 metre long, compatible with Zero system brackets. It is made of steel or aluminium, depending on system specifications, and is suitable for use with medium-high loads. The diameter or cross-section is optimised to fit the specific brackets without play.

This kit requires Zero profiles (part numbers 7023649 or 7023749) and the shelf and module boards, which are not included. The structural elements of the furniture must be adapted to the Zero anchoring system.

It allows for quick installation, with no adjustment tools or disassembly required, while maintaining the load capacity of the Zero system (over 100 kg per module) and offering configuration flexibility.

Ideal for creating mixed and matching compositions: Closed storage space (module) Open area with shelf Hanging area with metal rod Perfect for dressing rooms, wardrobe areas or modular design furniture.

Available in stone grey (RAL 7048) and textured black (RAL 9005), both on zamak, they integrate perfectly with the Zero profiles in the same finish to maintain a unified and professional aesthetic.

The included bar has a length of 1,003 mm, which allows exact compensation for the tension-free fitting between profiles. This measurement already provides for the necessary clearance to fit the brackets and to avoid friction or lateral pressure.

Each shelf, correctly installed, can support more than 100 kg per module, provided that the load is evenly distributed and the boards are of adequate thickness and density.

Fixing is carried out directly on the Zero profile using screws Ø3.5x16 mm, included in the kit. No special tools are required, and there is no need to drill the profile, which speeds up assembly and protects the structure.

Yes, the system allows readjustment without disassembly of the assembly. The brackets can be moved to another height or section within the profile, allowing a dynamic and adaptable configuration to design changes or end customer needs.

Although it is optimised for wooden boards or derivatives, it can also be adapted to melamine, compact or even metallised panels, provided that they allow secure screwing. The bar is compatible with standard hangers and can be integrated into mixed-use projects (textile + storage).

Its function is to close and conceal the end of the Zero profile, preventing the exposed face from being exposed and improving the visual finish of the assembly.

The plug is placed at the end of the Zero profile, ensuring a clean finish on open or visible structures.

It is made of plastic, which makes it easy to install and light and resistant for use in furniture structures.

It is available in black and stone grey, allowing it to be combined with Zero profiles in the same colour.

Each unit includes 1 cap. The packaging is available in packs of 20 units per batch.

This tool is designed for quick and easy height adjustment or disassembly of Zero system accessories.

It can be stored in the Zero profile itself, even in non-visible areas, so that it is always available without risk of loss.

It is made of black plastic and zinc-plated steel, which guarantees durability, lightness and resistance to frequent use.

No, the product stands out for its ease of use, ideal for professional installers and also for users looking for a specific Zero system tool.

Each batch contains 1 tool, and the packaging is available in packs of 8 pieces.

The supplements or bases that are used along with the hinges have two holes for fastening to the furniture and a third hole for increasing the resistance of the hinge/supplement joint. It is especially designed for facilities that require more resistance such as on doors with pistons.

It allows the Zero profile to be fixed to the floor and ceiling, and is used to form a continuous vertical structure in installations without wall fixing.

The leveller allows a height adjustment of 10 mm, which facilitates precise adjustment to the ceiling or floor.

It is made of zamak with a textured stone grey painted finish (RAL 7048) and grey plastic, providing robustness and uniform aesthetics.

Includes: 1 leveller 2 screws Ø4x30 2 plugs Ø6x30 1 cover 1 Allen key 1 circular felt for the base

It is ideal for free-standing Zero structures with floor-ceiling fixing, especially as room dividers in homes, offices or shops.

Yes, this system allows height adjustment along the entire length of the Zero profile thanks to the fixings integrated in the plates.

The fixings are made of steel and zamak, with a textured black painted finish (RAL 9005).

The kit includes 2 plates, 8 M4x12 mm screws and 4 plastic caps, ready for mounting on the Zero modular structure.

Yes, the system is valid for any Hang hanger width.

The Zero fixings included in the kit lock the system to prevent unwanted upward or downward movement.

The piston hitch is installed on the inside of the module, bolting it to the door frame to hold the opening piston securely.

The nickel-plated finish provides increased corrosion and wear resistance, which prolongs the life of the coupling and maintains its aesthetic appearance.

This latch is compatible with aluminium doors and wooden or aluminium PLUS 7-8-10 models, designed for piston opening systems.

Its design provides precise piston adjustment, ensuring that the piston does not shift or run over time, improving the stability and functionality of the system.

The packaging includes 100 units of piston clamps, recommended for projects requiring multiple fixing points on kitchen, bathroom or office furniture.

Yes, it is compatible with pistons designed for wood and aluminium lift-up doors, specifically PLUS series models 4-11-14-15-16-17-18-19.

This latch is designed for wooden and aluminium doors. For glass doors, it is recommended to use a specific model for that material.

Yes, the coupling is fixed with screws on the inside of the cabinet module to ensure a firm hold of the piston.

It is made of steel with a nickel-plated finish, which gives it high resistance to corrosion and greater durability in kitchen and bathroom furniture.

Its main function is to serve as a fixing point for the piston, improving its stability and operation, but it is not designed to support the weight of the door on its own.

This hitch is designed to support pistons with a maximum load of 8 kg, ensuring stability and firmness in its installation.

Yes, it is designed to be used with vertical and lift-up opening pistons, provided that they are fitted with a mounting system that is compatible with side latches.

Installation is quick and easy, as no specialised tools are required. It is screwed directly onto the inside of the module, allowing for a stable fit.

It is made of nickel-plated steel for corrosion resistance and durability, ideal for kitchen and office environments where moisture can be a critical factor.

Its design is compact and unobtrusive, optimised for lateral screw mounting on aluminium or wooden surfaces. Its mounting format ensures that the piston is correctly aligned without unwanted movement.

What type of controller is needed to adjust the colour temperature?

Can the strip be cut to size and how is this done?

What power and luminous flux does it offer?

What is the adjustable colour temperature range?

What type of adhesive is included for installation?

Does the Lynx LED strip with colour temperature change require a controller to be able to use it?

What is the recommended procedure for installing the sensor in different types of furniture?

What is the maximum power the sensor can handle and how many lights can it control?

What are the characteristics of the sensor's motion detection?

Does it comply with any electromagnetic compatibility or safety regulations?

What type of connections and materials does the sensor include?

How is the LED strip properly installed on different types of surfaces?

What advantages does SOB technology offer over conventional LED strips?

How does it perform in terms of energy efficiency and luminous flux?

What protection does it offer against environmental conditions?

Can the MiniSOB strip be cut?

What kind of cutting and customisation does the SOB Freecut LED strip allow?

What is the connection compatibility and what advantages does the Lynx-Z Miniled system offer?

What makes this strip different from others in terms of light uniformity?

What performance does it offer in terms of light and energy?

What are its installation and environmental resistance characteristics?

Can the SOB Free-cut strip be cut?

The following video shows how you can easily assemble the Vantage-Q drawer.

The RAL code of the white finish of the sides of the Vantage-Q kitchen drawer is approximately 9003.The RAL code of the grey finish of the sides of the Vantage-Q kitchen drawer is approximately 9006.

In order to plan the design of a kitchen drawer unit with Vantage-Q drawers, we need to bear in mind several parameters, this work is made easier with a help table to configure those units.This calculation table makes it possible to calculate the position of the guides, depending on the dimensions of the unit and the number of drawers.Also, it makes it possible to choose different heights of drawer, consequently it calculates the height of the façade of each of them within the same unit.

In order to plan the design of a kitchen drawer unit with Vantage-Q drawers, we need to bear in mind several parameters, this work is made easier with a help table to configure those units.This calculation table makes it possible to calculate the position of the guides, depending on the dimensions of the unit and the number of drawers.Also, it makes it possible to choose different heights of drawer, consequently it calculates the height of the façade of each of them within the same unit.

We have different heights of sides and accessories that make it possible to create different types of drawers.You can design inner and exterior drawers, with a large capacity for saucepans, with rounded or square rails, with inside accessories and even glass sides.