Frequently asked questions
Yes, the hinges and accessories come with Ø4x16 mm screws with the same titanium finish.
The following video shows how you can easily assemble a lifting piston.
The following video shows how you can easily assemble the Vantage-Q drawer.
The following video shows how you can easily assemble the Ultrabox drawer.
We have a table for calculating the weight of a door, which is necessary to know when choosing guy ropes and measurements.Depending on the material of the door, as well as its dimensions, the result will be the weight of the door (kg) that you can use to calculate to the necessary strength of the measure (Kg x cm).
The 165° angle allows full opening of the door, optimising access to the entire interior of the cabinet, ideal for applications such as wardrobes and large storage units.
The three-dimensional adjustment offers height, side and depth adjustment, ensuring perfect alignment of the doors and correcting misalignments during installation on doors of different thicknesses.
The 35 mm diameter holes must be drilled to a depth of 3 to 7 mm, with an edge spacing of 3 to 7 mm, to ensure safe and stable mounting of the hinge.
The absence of a spring eliminates resistance during closing, providing a smooth and controlled movement, which is ideal for systems with magnetic closures or pushers.
The nickel-plated or titanium finish protects the hinge against corrosion, wear and tear and adverse environmental conditions, ensuring long-lasting functionality even in kitchens or bathrooms.
The eccentric adjustment allows a ±2 mm adjustment, ensuring fine control of door alignment, which is essential for high precision and technical design projects.
Drilling must be carried out with a 32 mm spacing between screws and a distance of 37 mm from the inner edge of the door, ensuring a solid and stable anchorage for the supplement.
The 0-height adjustment facilitates the exact alignment of doors on standard furniture, eliminating the need for additional modifications and ensuring fast and accurate installation.
The nickel or titanium finish provides superior corrosion resistance, which protects the supplement against external agents, as well as improving its durability in continuous use environments such as kitchens and offices.
This supplement is ideal for kitchen and office furniture, as it allows precise adjustment of the doors, maintaining their stability even in applications where frequent and constant use is required.
Installation requires 35 mm diameter holes with a drilling range of 3 to 7 mm, ensuring that the doors are 14 to 24 mm thick to guarantee a secure and stable fixing.
The cushioned closure reduces the impact when closing the doors, prolonging the life of the hinges and improving the user experience thanks to a smooth and silent movement.
The clip-on mounting system allows for quick installation without additional tools, improving coupling accuracy and significantly reducing the time required to complete the assembly.
The three-dimensional adjustment allows height, side and depth adjustment, correcting misalignments in the installation and ensuring that the doors are perfectly aligned with the furniture frame.
The 105° opening angle is ideal for furniture that requires wide and convenient access, such as kitchen cabinets, bathrooms and storage furniture in residential and commercial environments.
The drilling range of 3 to 7 mm ensures optimum fit between hinge and cup, providing structural stability and precise alignment for compatible doors.
The cushioned closure avoids sudden impacts when closing, protecting both the hinge and the door, prolonging its life and improving the user experience thanks to a silent movement.
The elbow design allows a partial overlap of the door, ideal for furniture with angular configurations or corner designs that require a specific solution to optimise space.
The three-dimensional adjustment allows precise height, side and depth adjustments, ensuring professional installation and perfect alignments on doors of different thicknesses.
The 105° opening angle is ideal for kitchen, bathroom and storage furniture, where convenient and wide access is needed, without interference with adjacent structures.
The X92 super bend hinge is specifically designed for overlapping doors or closed angle configurations, offering an optimised design to maximise space and ease of assembly.
The drilling of the cup should be carried out with a diameter of 35 mm and a drilling range of 3 to 7 mm, respecting the tolerances to ensure a stable and functional fastening.
The super elbow design allows for the mounting of overlapping doors, ideal for corner furniture or configurations in limited spaces where doors need specific adjustment for proper operation.
Soft close minimises impact and noise when closing doors, prolonging the life of the hinge and improving the user experience on furniture with constant use.
The 105° opening angle facilitates full access to furniture in tight spaces, such as corners or shared storage areas, without interfering with its functionality.
Installation requires a 35 mm diameter hole for the cup and a drilling range of 3 to 7 mm, ensuring compatibility with door thicknesses from 14 to 24 mm for a secure and functional fit.
The eccentric adjustment allows precise adjustments in depth and alignment, correcting misalignments and ensuring a professional installation in projects where tolerances are minimal.
The 105° opening angle improves accessibility, allowing wide and convenient access to furniture, ideal for environments such as kitchens and offices with shared or intensively used spaces.
The clip-on mounting system significantly reduces installation time by allowing quick and secure attachment, ensuring structural stability and ease of assembly without additional tools.
This design is ideal for furniture where a total overlap of the doors with the side of the furniture is required, optimising the use of space and improving aesthetics in modern or minimalist configurations.
The X91 super elbow hinges are designed for full overlay doors, offering maximum coverage of the cabinet side and compatibility with three-dimensional adjustment systems.
The 105° opening angle allows wide and convenient access, ideal for corner or angled furniture that requires unrestricted movement.
Pre-drilling should include boreholes with a diameter of 35 mm and a depth range of 3 to 7 mm, ensuring a firm fixing and perfect alignment for stable mounting.
The eccentric adjustment facilitates fine adjustment in depth, making it possible to correct misalignments in door thicknesses from 14 to 24 mm, which is crucial for customised projects.
The clip-on mounting system speeds up the installation process by eliminating the need for additional tools, providing fast and secure attachment in high demand installations.
The 35 mm cup is an industry standard, offering an optimal balance between stability and compatibility with different door thicknesses, guaranteeing a safe and sturdy installation.
The drilling range of 3 to 7 mm allows for flexibility in installation, adapting to different types of doors and ensuring a precise fit without compromising stability.
To ensure proper fastening, it is necessary to respect the drilling specifications of the shims, using Euro screws with a centre-to-centre distance of 32 mm and an entry depth of 12 mm.
The spring-loaded latch is designed to absorb impact and reduce wear and tear, providing smooth, controlled closing even on doors that are subject to frequent opening and closing.
In furniture with irregular finishes, the X92N hinges allow for depth, height and lateral adjustments by means of their three-dimensional adjustment, ensuring perfect closure and precise alignment.
No, this runner has different drawer mechanisms, as well as a different length.
The X92 elbow hinges are designed to fit perfectly on doors from 14 to 24 mm thick thanks to their three-dimensional adjustment system and standard 35 mm cup, ensuring an optimal and stable fit.
The clip-on mounting system allows for quick installation without additional tools, ensuring precise fastening and reducing assembly times on large volume projects.
The three-dimensional adjustment offers +/-2 mm height and side adjustments, as well as depth adjustments, allowing you to correct misalignments and ensure a perfect seal on custom-designed furniture.
The soft closing system avoids sudden impacts by cushioning the movement of the door, protecting both the hinge and the structure of the furniture, and prolonging the life of both components.
Pre-drilling should be carried out with a diameter of 35 mm, a depth of 3 to 7 mm and a centre-to-centre distance of 32 mm, which ensures a solid and precise fixing of the shims.
The 35 mm cup provides a larger contact area, increasing stability and allowing for a robust and durable installation in door thicknesses from 14 to 24 mm.
The depth adjustment by means of an eccentric screw allows precise control of the door position, correcting possible misalignments and ensuring a uniform and aesthetic closure.
The soft closing system automatically adapts to doors of different thicknesses, absorbing impacts and providing a controlled closure, ideal for intensive use in kitchen furniture and cupboards.
The clip mounting significantly reduces installation times, offering secure fixing without the need for additional tools, making it ideal for large-scale professional projects.
To install the 0-height supplements, pre-drilled holes with a diameter of 35 mm, a depth of 12 mm and a centre-to-centre spacing of 32 mm must be drilled to ensure optimum and aligned fastening.
The difference between the hidden Slippe rails with a hook as opposed to those that do not have a hook, is the possibility of disassembling the drawer with a simple click.
The adjustment of the hidden runners for Slippe drawers without a hook is achieved by turning the washer on the front fastening pivot, which is screwed for that purpose.
The hinges are compatible with door thicknesses between 14 and 24 mm, ensuring correct installation on a wide variety of furniture.
The straight supplement allows a height adjustment of ±1.5 mm by means of an included eccentric screw, ensuring precise levelling after installation.
The soft closing is achieved by a damping piston integrated in the hinge, which reduces impacts and ensures controlled door movement.
The required drilling range for the cup is from D = 3 to 7 mm, ensuring correct alignment and fixing to the furniture door.
Both hinges and shims are made of nickel-plated steel, a corrosion and wear resistant material with an aesthetic finish that guarantees long life and performance.
The set includes specific screws for fixing to 35 mm cups and screws for the supplement, compatible with standard boards and ensuring a firm and precise installation.
The X91 elbow hinge allows three-dimensional height, depth and lateral adjustments thanks to its integrated eccentric adjustment and automatic clip mounting system.
These hinges have an opening angle of 105°, ideal for ensuring accessibility and functionality in kitchen, office or cupboard furniture.
The straight supplement allows ±1.5 mm height adjustment by means of an eccentric screw and has a design that remains concealed under the hinge arm once installed.
No, this batch is specifically designed for doors with a thickness of 14 to 24 mm and is not compatible with thicker thicknesses.
The following video shows how you can easily assemble a drawer with soft- closing and T30 drop runners.
The drilling range required to install the hinges is 3 to 7 mm from the edge of the furniture, while the straight supplement requires standard drillings of 35 mm diameter.
The X91 super bend hinges are designed to withstand standard loads in kitchen, bathroom or wardrobe furniture, ensuring optimum performance even with heavy doors.
The perfect alignment of the door is guaranteed by the three-dimensional adjustment (height, depth and side) and the eccentric screw of the supplement.
Yes, the soft-close system is ideal for intensive use, as the damping piston reduces wear and improves the durability of the mechanism.
The straight supplement of this batch is distinguished by its compact design, which is concealed under the hinge arm, and by its full compatibility with the X91 and X92 hinges.
The following video shows how you can easily assemble the Miniwinch system.
At Emuca we have two models of Circum cable grommets, a 60mm diameter and an 80 mm diameter. For large plugs it is advisable to use the Circum cable grommet with an 80 mm diameter.
The guide is made of steel with a zinc-plated finish, which provides high resistance to corrosion and greater durability in demanding environments, such as kitchens or bathrooms.
This slide has a maximum load capacity of 40 kg, which makes it suitable for drawers that store heavy objects.
Yes, this slide is part of a system that includes versions compatible with depths of 350 mm, 450 mm and 500 mm, offering flexibility in use.
The soft-close feature avoids abrupt shocks when closing the drawer, which reduces wear and tear on parts and extends the life of the system, as well as improving the user experience.
Yes, this slide is compatible with full-extension systems, allowing full access to the inside of the drawer and better use of space.
The Quadrum cable grommet makes it possible to pass through cables of any thickness and hide their connections easily, enabling access to them at all times thanking to its folding cover and its black plastic filaments.It is designed to be embedded into a worktop or a table with prior machining of 147 x 68 mm for the model code. 5010062 and 257 x 68 mm machining for the model code. 50124. It is fastened via clipping and can be mounted on very thick surfaces.
There are two options:
- Without using the rubber trim: remove the cover and the rubber trim, pass the cable through the through-hole and place the cover on again but without the rubber trim.
- Using the rubber trim: it is possible to make a small cut to the rubber with a cutter, in a way that makes it possible to insert the cable and thus be able to keep the rubber mounted on the cable grommet. (Recommended).
The Miniwinch folding door system can be installed in both wooden and aluminium doors.You only need to consider that it needs a door with A+10 where A is the side thickness of the furniture.For example, if the side thickness of the furniture is 19 mm, the door will be fitted at 29 mm.If the aluminium profile is 45 mm wide, it can be fitted because it can go inside the profile.We can also use the Ankor hinge in this combination, because it can fit easily.
The diameter of hole that is used for the euro screws is 5 mm, as prior drilling is required to assemble those screws.
The breakfast bowl holder can hold up to 8 breakfast bowls, optimising the available storage space thanks to its adjustable dividers that organise the bowls efficiently.
The dimensions of the holder are 90x470 mm, which makes it compatible with most standard sizes of kitchen drawers.
It is made of aluminium and ABS plastic, materials that provide lightness, resistance to daily use and an elegant finish in anthracite grey.
Adjustable dividers adapt to the size and shape of the bags, securing them firmly to prevent them from slipping or breaking during storage.
This bowl holder offers a functional and modern design, optimising space and guaranteeing the safety of bowls, ideal for keeping kitchen drawers organised in a practical and aesthetically pleasing way.
The kit includes synchronised full-extension slides, with cushioned closure and a load-bearing capacity of up to 40 kg.
The recommended board thickness for the bottom and back of the drawer is 18 mm.
The drawer front can be precisely adjusted by means of an eccentric of ±2 mm vertically and ±1 mm horizontally.
Yes, the metal components are made of steel with an anthracite grey painted finish, which enhances strength and aesthetics.
No, the kit includes all the necessary elements: guides, side ribs, front hooks and screws, so there is no need to purchase additional elements.
An LED light may flicker for several reasons, in order to know the cause, you must:Check that the LED light is connected to the correct type of converter, constant voltage or constant intensity.Check that the power of the converter is not less than the total power of the LED lights connected to the converter.Check that that the converter is not overheating. The converter needs to have a suitable operating temperature. The operating temperature is printed on the converter.
Maintenance required: These slides require minimal maintenance. It is recommended to clean the tracks regularly with a dry cloth to avoid dust accumulation and to apply a specific hardware lubricant if any sliding resistance is felt.
Compatibility with customised designs: The slides are compatible with customised drawers as long as they comply with the technical specifications, such as a depth of 290 mm, a maximum weight of 25 kg and internal dimensions in accordance with the slide fixing system.
Locking pivot stability: The locking pivot ensures that the drawer remains completely fixed and level even when fully open, providing a safe user experience and preventing unwanted movement.
Compatibility with additional locking systems: These slides already have an integrated soft closing system, but can be supplemented with other automation systems if they are compatible with standard full extension slides.
Durability Guarantee: These slides are manufactured from high quality steel and finished in chrome, offering corrosion resistance and a guarantee of optimum performance even after years of frequent use. Specific warranty may vary by distributor.
It is important to ensure that the LED converter is compatible with the total power of the strip. For a safe installation, it is recommended to calculate the power consumption based on the 9.6W/m and add 20% extra capacity to the converter.
Yes, the LED strip can be cut every 3 LEDs. Cut only at the designated marks with insulated scissors and protect the exposed ends with suitable connectors or seal them to prevent short circuits.
The strip uses 3M™ 300LSE double-coated adhesive tape, which ensures strong and durable adhesion on clean, smooth surfaces. It is important to clean the surface with alcohol prior to installation for best results.
It is recommended not to exceed 5 metres per line without the use of signal amplification to avoid voltage drops that may affect the uniformity of brightness.
The IP20 rating is suitable for indoor use where it is not exposed to splashing water or excessive humidity. Ideal for furniture, shelving or indoor lighting.
If an LED light switches on and then switches off, it is because the converter is overheating.The most common reasons for the converter to overheat are a lack of ventilation in the place of installation or excessive power delivery.In this case the converter is providing all or more of the power that it can give and we will need to replace it with a more powerful converter.
The controller includes colour-coded wires to distinguish positive and negative. These are connected to the LED strips via AMP or Mini LED connectors and to the power supply via the included cables.
Yes, this controller is compatible with 12V and 24V LED strips, as long as the total power does not exceed the capacity of the power supply used.
The included cables have a length of 1.5 metres from the controller to the connection ends, facilitating installation in different configurations.
The controller is made of durable materials and its design includes overload and short-circuit protection, ensuring safe and prolonged use.
It uses AMP and Mini LED connectors, allowing fast and secure connection to compatible LED strips. These connectors are standard in LED lighting systems.
The DOUBLE Point switch LED Sensor operates on an input range of 100-240V AC at 50-60 Hz, so no additional power converter is required. It can withstand a maximum load of 250W, ideal for LED lamps.
The sensor is designed for recessed installation, with a visible diameter of 10.5 mm. It is suitable for wood, plastic or metal surfaces with a maximum thickness of 5 mm. It is recommended to use a specific drill bit to ensure a perfect fit.
The sensor has a motion detection capability of up to 5 cm. This makes it ideal for applications where non-contact activation is required, such as in cabinets or drawers.
The sensor body is made of high-strength plastic with a metallic grey finish that simulates aluminium. This provides durability, impact resistance and a discreet, modern aesthetic design.
The sensor is UKCA and CE certified, ensuring compliance with EU and UK electrical and material safety regulations.
The choice of a system for fold-down doors using a steel cable, like Microwinch or Miniwinch, depends on the height and weight of the door. To do so, you simply need to follow these simple steps:1. Check the height and the weight of the door. 2. Once you have obtained the values, look up the selection table. Depending on the weight of the door, you will be able to choose one fold-down system or another. Also, the table will indicate the number of systems needed for said door (x 1 or x2).
If an LED light does not turn on it is because it needs more power than that provided by the converter or it may be due to a polarity problem.In this case lights connected to a direct current have to maintain polarity throughout the entire circuit (positive with positive and negative with negative).
The Sensor LED Dot Ø16 supports a maximum power of 36 W for 12V DC luminaires and 72 W for 24V DC luminaires. Several luminaires can be connected via a single converter.
The sensor is designed for recessed installation in furniture, with an installation diameter of 16 mm. It is easily fixed using the included 6-input AMP distributor, AMP connectors and screws.
In addition to switching the luminaires on and off with a short press, the sensor allows the light intensity to be dimmed with a long press. It also includes a memory function that saves the last intensity selected.
The sensor is made of plastic with an aluminium painted finish, providing wear resistance and a discreet, elegant design. The included 1.5m cable makes it easy to install in a variety of configurations.
This product complies with safety certifications such as IP44, CE, and RoHS, ensuring splash water resistance, electromagnetic compatibility, and compliance with environmental and safety regulations.
The Lynx H connector has a power capacity of 48W for 12V DC LED strips and 96W for 24V DC LED strips. It is compatible with 8mm wide LED strips, ideal for decorative and functional lighting.
Installation of the connector is simple. The end of the LED strip is placed into the connector and locked by a click mechanism that secures the connection. This allows a quick and reliable connection between sections of LED strips.
The Lynx H connector has dimensions of 8 mm wide, 24.5 mm long and 7.9 mm deep, making it compact and easy to integrate into tight spaces, ensuring compatibility with standard 8 mm wide LED strips.
The connector has a strong adhesive tape on the underside to secure it to surfaces, ensuring stability and preventing displacement during use.
Although no certifications are specified in the data sheet, the robust design and click mechanism ensure a safe and reliable electrical connection, suitable for domestic and professional applications.
The Lynx Premium LED strip has an output of 9.6 W/m and a luminous efficacy of 94 lm/W. It provides a luminous flux of 910 lm/m, ideal for continuous lighting applications over long lengths.
It is powered by a 24V DC power supply and requires an LED converter (not included). Installation is simple thanks to the 15 cm cables soldered at both ends of the 10 m roll, making it easy to connect.
The strip is available in two colour temperatures: natural white (4,000 K) and warm white (2,700 K). It has an illumination angle of 120°, suitable for uniform and wide-range illumination.
It is dimmable and can be cut every 100 mm to suit different needs. This allows the length to be customised according to available space or specific applications.
It is manufactured with a double-layer PCB for durability and thermal efficiency. In addition, it includes a 3M® 300LSE adhesive tape, which ensures secure and stable attachment to a variety of surfaces.
The Lynx Premium LED strip has an output of 14.4 W/m, providing a high light output. It is designed for applications requiring powerful and uniform illumination.
It is available in three colour temperatures: cool white (6,000 K) ideal for work or commercial areas, natural white (4,000 K) for balanced and versatile environments, and warm white (3,000 K) for cosy or decorative environments.
The strip can be cut every 50 mm, allowing precise customisation according to the needs of the space. Each segment includes 3 LEDs arranged at a distance of 16.7 mm, ensuring uniform illumination along the entire length.
It is made of durable plastic, with a uniform thickness of 8 mm for easy handling and installation. The design exposes the LED spotlights, maximising their light output.
It offers an IP20 protection level, which makes it suitable for indoors and places protected from excessive dust. It is not suitable for wet areas or outdoors without additional protection measures.
In order to choose the correct converter or transformer for each light, it is necessary to:1. - Know the type of converter or transformer that corresponds to each light (12V DC, 350 mA or 12V AC). In our catalogue we indicate on each light the type of converter or transformer that must be used through a series of icons.2. - Know the total necessary power (6 W, 15 W, etc.). Once you have chosen the type of converter you have to choose the power that is required. For that purpose, it is necessary to add up all the powers of the lights that you are going to connect to the same converter.For example, you have 4 Orion lights (code 7048162) each 3 W, the total power is therefore 12 W. It is recommended that the converters work at 80% of the maximum power that they withstand. Therefore, we will choose the 15 W LED converter (code 7001420).Likewise, the maximum number of lights that can be connected to the same converter is 6 units, as the AMP distributors have 6 connectors.
The Crux Ring has an outer diameter of 65 mm and an inner diameter of 59.4 mm, making it compatible with Crux and Crux-in lamps. It is designed for a perfect fit with these LED spotlight models.
It is made entirely of plastic with a polished metallic grey aluminium painted finish. This finish combines durability with an aesthetic design that simulates satin aluminium, providing a modern and elegant appearance.
Installation of the Crux Ring is simple, thanks to the two screw holes at opposite ends, 45 mm apart. This allows for a secure and stable fixing.
Its rounded and polished design makes it easy to integrate into lighting projects, providing a professional and aesthetically pleasing finish to the mounting of LED spotlights. In addition, its lightweight construction simplifies handling and installation.
The package includes 6 units ready to install with Crux lamps. Each ring is precision-engineered to fit perfectly and comes in practical packaging for easy transport and storage.
The Lynx Q connector supports a maximum power of 36W for 12V DC LED strips and 72W for 24V DC LED strips. It is compatible with 8mm wide LED strips, ideal for decorative or functional applications.
Installation of the connector is simple: insert the LED strip into the ends of the connector, making sure to respect the positive/negative orientation. When the strip is inserted correctly, a "click" sound is generated to confirm the connection.
The Lynx Q connector has dimensions of 10.5 mm wide, 20.8 mm long and a compact design, making it suitable for projects requiring discreet and precise connections on 8 mm LED strips.
It is made of durable plastic, providing safety and durability of the connection. Its design ensures a firm and reliable installation, even in environments where LED strips are frequently handled.
This connector is suitable for both 12V and 24V LED lighting systems, making it versatile for residential, commercial and decorative applications requiring continuity in the LED strip circuit.
Yes, the converters with metal casing need to be earthed and include a specific terminal for connection.
The Crux-in-Q LED spotlight has an output of 1.8 W and consists of 24 LEDs that provide natural white light at 4,000 K. It is efficient for furniture lighting applications thanks to its low energy consumption.
It is available in four finishes: white, black, aluminium and satin nickel. These finishes allow it to be easily integrated into different styles and designs of furniture, offering a versatile and elegant aesthetic.
The spotlight has dimensions of 65.5 mm x 65.5 mm and a thickness of 12.9 mm. Its compact square design makes it easy to install in built-in furniture. The visible cover is only 2 mm thick for a discreet and professional finish.
It operates with direct connection to AC 230V 50Hz, eliminating the need for an additional converter. This simplifies installation and reduces costs associated with additional electrical components.
The spotlight is IP20 rated, making it suitable for use indoors and in dry environments such as cabinets, shelves and other furniture where it is not exposed to excessive moisture or dust.
The Atom multiconnector features a Schuko F-type plug (EU) with a maximum power rating of 3,000 W - 13 A, two USB type A connectors with 5V DC output (1 x 2A and 1 x 1.5A), and an HDMI 2.0 connector. This allows a wide range of electrical and electronic devices to be connected.
The manual lift-off lid features a soft-close closure for safe and convenient access to the connectors. In addition, its design includes an LED power indicator for a clear display of the device's status.
It is installed by machining on surfaces of 113 x 116 mm. Brackets and screws are included in the scope of delivery, ensuring a firm fixation and easy mounting on desks or work tables.
The USB ports are ideal for charging mobile devices, tablets and other electronic equipment, while the HDMI 2.0 connector is suitable for connecting displays, projectors and other AV devices.
The multi-connector is made of a combination of plastic and aluminium with a black painted finish, providing resistance to wear and tear and a modern design that integrates perfectly into any office or home space.
No, they are isolated converters. Therefore, they do not need to be earthed.
The Kuma flexible spotlight uses energy-saving LED technology with a power of 2.1 W and energy efficiency class A++. It offers a colour temperature of 4,000 K (natural white) and a luminous flux of 150 lm, ideal for reading and work applications.
The integrated touch sensor allows the lamp to be switched on and off with a simple touch. In addition, with a long touch, the light intensity can be adjusted to suit different lighting needs.
The flexible spotlight arm has a lighting angle of 180 degrees, allowing the position and direction of the light to be precisely adjusted. This makes it especially functional for activities that require spot and adjustable lighting.
The two USB ports at the base of the spotlight are capable of simultaneously charging electronic devices such as mobile phones, tablets and other USB charging compatible equipment.
The kit includes 1 LED luminaire, a 30W constant voltage converter, and fixing screws. Installation is simple and instructions are included, making it easy to mount on desks, bedheads or other surfaces.
The Alcor LED Spotlight Kit has a power of 1.2 W per wall light and a luminous flux of 95 lm with a natural white colour temperature (4,000 K). It offers a 90 degree angle of illumination and has energy efficiency class A++.
Installation is recessed and requires pre-machining with a diameter of 16 mm. The spotlights protrude only 1 mm from the surface for a discreet and professional design.
The compact and decorative design of the spotlights allows them to be elegantly integrated into furniture and cabinets, providing functional lighting without compromising the aesthetics of the space.
The kit includes 6 LED lamps, a 15W constant voltage converter, fixing screws and installation instructions. Each wall light has a 1.5 m cable, and the converter includes a 2 m cable for easy electrical connection.
This kit is ideal for interior lighting of furniture, cabinets and display cabinets, providing efficient and decorative light in residential or commercial spaces.
The power tolerance should be -20% in power supplies. That is to say, if the total power of lights connected to a single converter is 12 W, it is necessary to use a 15 W converter. However, if the installation surpasses 12 W, it is necessary to choose a more powerful converter, for example 30 W.
The Point Door Double LED sensor works by proximity detection. It turns the LED light on and off when interference is detected in its range, such as when a cabinet door is opened or closed.
It has a sensing range of 3 cm, making it ideal for applications in cabinets, drawers or other furniture where automatic switching is necessary when interacting with the space.
The sensor design includes two compact and unobtrusive detectors, connected by 1.5 m long cables. This allows for easy and flexible installation in different furniture configurations.
The sensor includes a power cable with TYPE B plug that connects directly to the converter. It is made of plastic with a painted aluminium finish, combining durability and aesthetics.
It is compatible with LED luminaires up to 250 W and can be used in systems with separate modules, such as compartment cabinets or structures with segmented lighting.
The Plugy connector has 2 USB Type A ports, with a total charging capacity of up to 3.4A (1 port at 2.4A and 1 port at 1.7A). It allows you to charge two electronic devices simultaneously, such as mobile phones or tablets.
The kit includes a USB connector (2 type A ports), a 30W 12V DC converter, and fixing screws. In addition, it has a protection system against overheating, power surges and voltage surges to ensure electrical safety.
Installation requires machining in the cabinet with a diameter of 25 mm. The kit also includes a 2 metre power cable with European plug for easy connection.
This USB connector is ideal for use in home, kitchen or office furniture. It is perfect for charging electronic devices in an accessible and discreet way on desks, worktops or desks.
It is made of plastic with black or painted aluminium finishes. Its compact and aesthetic design allows it to be integrated into any space, offering a practical and modern solution for charging electronic devices.
The RGB remote control has 10 buttons that allow you to turn the lights on and off, adjust the light intensity, change colours and set up effects using a touch wheel for the colours. It also has an LED indicator that shows the commands in use.
The controller has a concave design with dimensions of 107 mm high, 59 mm wide and 9.2 mm thick, which improves its ergonomics and fit in the hand. Its white finish on the front and black on the back give it a modern and functional look.
It has a range of up to 20 metres and is suitable for RGB LED strips, allowing convenient and versatile wireless control in residential or commercial installations.
The package includes 1 remote control that can be connected to multiple LED strip controllers at the same time. It also includes the necessary items for immediate use.
The remote control complies with certifications such as UKCA and CE, guaranteeing safety, quality and compatibility with current European regulations.
The Point Switch Simple LED Sensor uses proximity sensing to automatically turn an LED light on and off. This occurs when interference is detected within its detection range.
The sensor has a detection range of 3 cm, making it suitable for applications such as cabinets, drawers or any space that requires automatic illumination when interacting with proximity.
The compact design of the sensor, with a small sensor head and 1.5 m cables, allows for unobtrusive installation on furniture or other surfaces, optimising the available space.
The sensor includes a power cable with TYPE B plug for direct connection to the converter. Its body is made of plastic with an aluminium painted finish, providing durability and aesthetics.
The sensor operates on 100-240V AC input at 50-60 Hz and can control LED luminaires up to 250W. This makes it compatible with a wide range of lighting systems.
The Mizar LED spotlight offers a power of 2.5 W or 5.2 W depending on the model, with a natural white colour temperature of 4,000 K and a luminous flux of 200 lm. It has A+ energy efficiency, ideal for low consumption lighting.
This spotlight does not require an additional converter, as it operates directly from a 230V AC connection. This simplifies installation and reduces the costs associated with additional components.
It is available in two sizes: 66 mm and 84 mm in diameter. Its installation is recessed and requires a pre-drilling of 55 mm in diameter, facilitating its integration into furniture and wardrobes.
The finishes available are satin nickel, matt black and painted aluminium. These finishes allow it to adapt to different decorative styles, from modern to classic.
The spotlight is made of steel and plastic, which combines durability with lightness. Its design incorporates a diffuser that homogenises the light, providing uniform and pleasant illumination in any space.
The Lynx flat profile has a U-shaped design with dimensions of 20.2 mm horizontal width, 10.9 mm vertical height and 11.6 mm internal depth. It incorporates tabs and protrusions on the sides for easy installation and fastening of LED strips.
It is made of matt anodised aluminium, a material that combines lightness with high corrosion resistance. The anodised finish provides a modern and elegant appearance, ideal for decorative and functional applications.
The profile is available in two lengths: 2.35 metres and 3.9 metres, offering flexibility to suit projects of different sizes and configurations.
The LED strips are held in place by the profile's internal protrusions, which allow the strips to be held firmly in place, preventing displacement and facilitating their aesthetic integration.
This profile is ideal for recessed lighting projects in furniture, ceilings or walls, where a discreet and professional installation of LED strips is required, providing a clean and functional finish.
The Polaris LED spotlight offers a power of 1.2 W and emits natural white light with a colour temperature of 4,000 K. It provides efficient and pleasant lighting, suitable for work areas and decorative use.
The spotlight has a diameter of 30 mm in its recessed area, 12.5 mm deep and 33 mm visible diameter. It requires pre-machining for recessed installation in furniture or surfaces.
Its matt anodised aluminium construction provides corrosion resistance, durability and a modern design that blends in perfectly with different styles of furniture.
The spotlight illuminates an area range of 1.25 metres, making it ideal for applications in kitchens, bathrooms, showcases and work areas where spot and uniform illumination is required.
The package includes 6 units of LED spotlights, each with a 1.5 metre connection cable, plus the necessary components for mounting and installation. This makes it easy to use in projects that require multiple light points.
The Dimmer remote control allows you to control the ON/OFF of the LED lights, adjust the light intensity with dedicated buttons and choose precise brightness levels using a touch wheel.
It has an ergonomic design with a curved area that makes it easy to fit in the hands. Its compact dimensions of 107 mm high, 59 mm wide and 9.2 mm thick make it comfortable to handle.
The controller has a range of up to 20 metres, ideal for controlling compatible LED strips, especially those that support dimming.
It is made of plastic with white finish for the front and black for the back, offering a modern and contrasting design that enhances its aesthetics and functionality.
The package includes a remote control ready to be connected to LED strip controllers. Its wireless design ensures easy and versatile use in lighting installations.
The Lynx flat diffuser profile is designed to completely cover the LED strips, allowing partial light to pass through thanks to its opaque white finish. This softens the illumination and eliminates visible light spots for a more uniform effect.
It has dimensions of 17.5 mm horizontal width and 5.7 mm vertical height, allowing it to perfectly cover standard LED strips while integrating unobtrusively into the design.
The diffuser profile is available in lengths of 2.35 metres and 3.9 metres, providing options to suit different project sizes.
It is made of plastic with an opaque white finish, which offers strength and a clean design, suitable for decorative and functional applications.
The package includes 20 units of the diffuser profile, ready for use. It is ideal for recessed or surface lighting projects in furniture, showcases and ceilings, where homogeneous and aesthetic lighting is sought.
The Point Motion Simple LED sensor detects the movement of a human body within its range and automatically switches on the connected LED lights. Once no motion is detected, the timer switches the lights off after 45 seconds.
It has a detection range of up to 1.5 metres and a 90° angle of coverage, making it ideal for applications in cabinets, drawers or any space where automatic illumination is required when motion is detected.
The built-in timer switches the lights off after 45 seconds without detecting motion, improving energy efficiency and reducing power consumption in environments with intermittent use.
The package includes 1 sensor, a 6-input AMP distributor, AMP connectors and fixing screws. Installation can be surface or flush mounted, depending on the needs of the furniture or space.
The sensor operates with 12V DC (36 W) and 24V DC (72 W) LED luminaires. This makes it compatible with a wide range of LED lighting systems, adapting to various configurations and environments.
IP44 is the name given to the index that a light or component has in order to protect itself against objects larger than 1 mm and that also have protection from liquid splashes in all directions. In this case, depending on the area where the lighting is located, it would be suitably for assembly in bathroom furniture.
The accessory for recessing in aluminium profile with curved diffuser improves the final finish of the mounting, providing a clean and aesthetic closure to the profile where the LED strips are installed.
The dimensions of the fitting are 12.7 mm high, 23 mm wide and 16.5 mm long overall. It is designed to fit perfectly into the 20 mm wide and 10 mm high profile channel.
It is made of grey plastic, which is strong, durable and easy to clean. This ensures good performance and a uniform appearance in the lighting system.
Installation is simple: the fitting is placed in the profile channel and the electrical connection cable of the LED strips is passed through it. Finally, the curved diffuser is press-fitted to complete the assembly.
The pack includes 20 units of the accessory, ideal for projects requiring aesthetic finishes on aluminium profiles with curved diffusers, such as furniture, showcases or decorative structures.
The "L" joint allows two LED strips to be connected at right angles, facilitating installations in corners or designs that require 90° turns. It is useful in furniture, display cabinets and structures where changes in lighting direction are required.
The junction supports 12V DC and 24V DC LED strips with a maximum power of 48W (12V) and 96W (24V), ensuring compatibility with a wide range of LED strips.
The dimensions of the junction are 8 mm thick in the run and 19 mm long in each direction, making it compact and suitable for 8 mm wide LED strips.
It is made of plastic for flexibility and durability. It includes an adhesive on the bottom to fix the connection firmly and avoid displacement during use.
The pack includes 10 units of L-shaped connectors with IP20 certification, making them dustproof. They are ideal for indoor LED lighting projects that require secure and aesthetically pleasing connections.
The inclined profile has dimensions of 25 mm horizontal x 18.4 mm vertical at its highest section. Its 30° inclination facilitates installation on horizontal surfaces, providing an optimum angle for indirect lighting. It is compatible with wood, MDF, and other rigid materials, provided that screws or adhesives suitable for the base material are used.
Matt anodised aluminium has excellent heat dissipation properties, helping to maintain an optimum temperature in LED strips and prolonging their lifetime. This is especially important in installations with continuous use or in enclosed spaces.
The profile is compatible with standard LED strips up to 10 mm wide. The internal tabs ensure a firm fit, preventing displacement even in case of vibrations or frequent handling.
To fix the profile, it is recommended to use the specific brackets available or high-strength adhesives. On flat surfaces, the lower flanges allow direct fixing, while on uneven surfaces it is ideal to pre-level the installation area to ensure stability.
Yes, the profile complies with standard manufacturing and anodising standards, ensuring durability and corrosion resistance, which are key factors in indoor LED lighting applications.
The Lynx profile has dimensions of 2.35 m in length, 18 mm in width and 10.7 mm in height. These dimensions make it compatible with LED strips up to 10 mm wide, ensuring a safe installation and a perfect fit for various lighting projects.
It is made of matt anodised aluminium, a corrosion and wear resistant material, ideal for indoor applications. The anodised finish provides modern aesthetics and additional protection against damage.
To fix the profile, the use of screws through the aluminium plate is recommended. These must be suitable for the type of surface (wood, MDF, or metal). It is suggested to pre-drill the material to avoid deformations.
Yes, the profile is compatible with diffuser caps that fit perfectly into the profile design. The covers are installed by fitting them onto the ends of the profile, ensuring that they fit tightly and allow the light to pass through evenly.
It is recommended to periodically clean the profile with a dry or slightly damp cloth to remove accumulated dust. Avoid using abrasive products that may damage the anodised finish. This ensures greater durability and maintains the quality of the lighting.
The fitting is 11.6 mm high, 23 mm wide overall, and 16.5 mm long, with a small overhang of 5 mm to facilitate fitting to the profile. These measurements ensure a precise fit and a professional aesthetic finish for the Lynx profile.
The kit is made of grey plastic, an impact resistant, durable and easy to clean material. This plastic is ideal for furniture applications due to its ability to maintain its shape and colour over time.
Installation is simple: first, the LED strip cable is fed through the hole in the fixture; then the fixture is snapped onto the profile, ensuring that it is fixed, and finally it is placed in the channel made in the furniture for a clean finish.
This kit is specifically designed for the Lynx recessed profile, ensuring perfect compatibility. It is not recommended for use with other profiles that do not belong to the same range.
For maintenance, it is suggested to clean the accessory with a soft cloth and non-abrasive products to avoid damaging the finish. This will help to preserve both its functionality and aesthetic appearance for a longer period of time.
The Micron LED Sensor allows the light intensity to be dimmed in a range of 5% to 100%, easily controlling the brightness via the integrated touch switch. This functionality allows the lighting to be customised according to the needs of the space.
It is compatible with 12V DC and 24V DC electrical systems. The input and output are designed to support up to 24W at 12V DC and 48W at 24V DC, offering a wide versatility for different lighting applications.
The sensor is IP44-rated, making it resistant to dust and exposure to liquids, such as small splashes. This feature ensures durability in indoor environments that may be subject to such conditions.
The included AMP distributor has 6 inputs allowing up to 6 luminaires to be connected and controlled simultaneously. Its design facilitates quick connection via AMP connectors, ensuring a tidy and efficient installation.
For installation, it is recommended to follow these steps:
Verify that the electrical system operates within the 12V or 24V DC range.
Connect the sensor and the AMP distributor using the supplied connectors, ensuring correct polarity.
Fix the sensor on a suitable surface, avoiding areas with direct exposure to excessive moisture.
Check that the luminaires are correctly connected before switching on the system.
The fixings are installed by screwing them directly to the furniture in the desired position. Once in place, the Lynx slanting profile snaps into place over the fixings, ensuring a firm and stable hold.
The kit allows the electrical connection of the LED strips in three ways: under the side cover, through a hole at a 90 degree angle, or through the back of the profile. It is recommended to use a drill to drill the necessary holes in the profile, ensuring that the wiring is properly insulated and protected.
All components are made of durable plastic, a lightweight and durable material that guarantees long-term performance. In addition, the grey finish provides a clean, unobtrusive look that matches the design of the profile.
Yes, both side covers and fasteners can be reused in the event of removal or relocation, provided they are kept in good condition. This makes them ideal for projects requiring flexibility.
The kit includes screws compatible with surfaces such as wood, MDF and other similar materials. The screws are designed to facilitate assembly, providing a secure fixing and preventing damage to the base material.
The SIMPLE LED Point Door Sensor uses a proximity sensing system that turns the LED luminaire on or off when it detects interference within a range of 3 cm, such as when a cabinet door is opened or closed. This system is designed to provide accurate and automatic activation.
The sensor is designed to operate on 240V AC input at 50-60 Hz, supporting a maximum power of 250W. It is compatible with LED luminaires and ensures safe and efficient performance in domestic or commercial electrical systems.
The cable with TYPE 8 plug allows the sensor to be connected directly to the converter without the need for additional adapters. This connection facilitates quick and safe integration into the lighting system.
No, the sensor has a fixed detection range of 3 cm which cannot be adjusted. However, its compact design and predefined range make it ideal for specific applications, such as cabinets and furniture.
The sensor is made of plastic with an aluminium painted finish, giving it resistance to wear and tear and a modern aesthetic that integrates easily into furniture design. In addition, its materials ensure durability in indoor environments.
The Lynx Basic LED strip has an output of 9.6 W/m, an efficiency of 69 lumens per watt and a total of 120 LEDs per metre. These specifications ensure uniform and high quality illumination for decorative or functional applications.
The IP65 certification ensures that the LED strip is dust and splash water resistant, making it ideal for indoor applications and semi-covered areas such as kitchens, bathrooms or furniture that may be exposed to occasional moisture.
The LED strip can be cut at marked intervals, usually every 25 mm, to suit the desired length. Connections can be made using specific connectors for LED strips or by soldering wires to the exposed contact points, ensuring adequate insulation.
Cool white light (6000K) is ideal for environments where brighter and more functional lighting is desired, such as offices, kitchens or work areas. Warm white light (3000K) is more suitable for cosy environments, such as living rooms or bedrooms, where you want to create a relaxing atmosphere.
For installation, it is recommended to use the adhesive tape included on the back of the strip, which is suitable for smooth and clean surfaces. In case of textured or difficult to adhere surfaces, additional fixings such as clips or aluminium profiles can be used to ensure a firm installation.
The side covers are easily fitted to the ends of the Lynx profile using the screws included in the kit. Once fixed, the LED strip cables are passed through the designed space and the profiles are snapped into place.
The kit includes screws suitable for mounting on surfaces such as wood, MDF and other similar materials. The screws are designed to provide a firm and stable fixing.
The side covers are made of durable grey plastic, which ensures durability and ease of cleaning, as well as providing an aesthetic finish that blends in with the design of the profile and furniture.
Yes, both covers and screws can be reused if the profile is dismantled or relocated, provided the components are in good condition. This makes them ideal for flexible or temporary installations.
This kit improves the aesthetics of installations by covering the ends of the profile, providing a clean and professional finish. It also facilitates cable management and ensures that the profile stays in place with easy installation.
Yes, it can be cut every 63 mm.It also shows cutting marks in one of the strip sides, since it has a more transparent area where the darker side shows the cutting areas.Since the strip has cables on the two sides, each strip has to be cut in 2 pieces, to have a cable on each side.If you need additional cuts, the waste can be used connecting the strip with the 8 mm Lynx Q or the Lynx H cable or by welding the strip.
The Neonlynx LED strip has an output of 7.6 W/m, an efficiency of 49 lumens per watt, and 126 LEDs per metre. These features provide uniform, high quality illumination, ideal for both decorative and functional applications.
The IP65 certification ensures that the LED strip is dust and water resistant, making it suitable for installations in wet locations such as bathrooms, kitchens or semi-covered areas. This ensures durability even under splashing conditions.
The strip can be cut at marked 63 mm intervals to suit the needs of the project. Cuts should be made with suitable tools to avoid damage, and connections can be made using the included miniLED connectors or soldering, ensuring proper insulation.
A 24V DC LED converter with sufficient capacity to handle the total power of the installed LED strip is recommended. For example, for a 3 metre roll (22.8 W), a converter that handles at least this power with an additional safety margin is required.
The strip is made of high quality silicone, which ensures colour temperature stability and resistance to humid environments. This flexible material also allows installations in curved or straight shapes, increasing the possibilities of design and durability.
This extension cable is suitable for connecting LED luminaires compatible with 12V DC and 24V DC systems. Its design ensures a stable electrical flow, maximising performance and preventing overloading of the connected luminaires.
To install the cable, connect the male MINILED connector end to the converter and the female end to the luminaire. Make sure that the connectors are tight and that the polarity is correct before switching on the system.
Yes, it is possible to extend more than 2 metres using additional cables. It is recommended to use good quality, secure connectors and to verify that the system can support the additional distance without loss of voltage or power.
MINILED connectors guarantee a firm and simple connection, preventing accidental disconnection. Each connector is polarised to ensure correct power transmission and avoid damage to the luminaires or the converter.
During installation, avoid excessive bending or mechanical stress on the cable. Be sure to keep it away from sources of heat and excessive humidity to ensure its durability and safety in the electrical system.
No, 24V Lynx strips are not compatible with 12V Lynx strip accessories.To make 24V Lynx strips work, it is necessary to have a 24V LED converter and SPECIAL 24v H cable including a Miniled connector, so the whole range can work with said connection.12 V Lynx sensors are not compatible either. They work at 12V, but can be used with most sensors in the Emuca catalogue admitting 24V or working at 230V AC.
The Crux LED spotlight requires a stable 12V DC power supply. It is necessary to use a suitable converter that supports the total power of the installed spotlights, considering 1.8 W per unit.
The spotlight is fixed to the furniture by means of its recessed design. It is important to drill a 60 mm diameter hole with suitable tools to ensure a perfect fit in materials such as wood, MDF or chipboard.
A 12V DC LED converter with a watt rating greater than the total power of the installed spotlights is recommended. For example, for 6 spotlights, the converter should handle at least 10.8 W (1.8 W x 6) with an additional margin for safety.
Yes, it is possible to combine 4500K and 6000K lamps in the same installation. However, it is recommended to plan the distribution to avoid visual inconsistencies and to maintain harmony in the illuminated space.
To maintain the performance of the spotlight, it is suggested to clean it periodically with a soft, dry cloth. Avoid using abrasive products that may damage the finishes and regularly check the electrical connections to ensure optimum performance.
The Lynx Premium LED strip has an output of 4.8 W/m, a luminous flux of 539 lm/m and an efficiency of 112 lm/W. These features ensure efficient and high quality lighting in interior spaces.
3M Adhesive Tape 300LSE provides a strong and durable hold, allowing the LED strip to adhere securely to smooth, clean surfaces, facilitating quick installation without the need for additional brackets.
The LED strip can be cut at the marked intervals of 3 LEDs. It is recommended to use sharp scissors or specific cutters for LED strips, making sure to cut on the indicated marks in order not to damage the circuits.
Thanks to its IP20 certification, this LED strip is ideal for indoor applications where there is no exposure to moisture or water, such as furniture, shelves, offices or work areas.
A 12V DC LED converter is required. To calculate its capacity, multiply the power of the strip (4.8 W/m) by the total length of the installation. For example, for a 5 metre strip, a converter is required to support at least 24 W, with an additional margin for safety.
Yes, it is totally compatible.Also, if they need a straight H joint of 8 mm (code 5061120), it may also be used because it is compatible with LED strip profiles and diffusers.
The Lynx H cable is compatible with 8mm LED strips thanks to its compact design and specific MINILED connectors. In addition, it supports 12V DC (up to 36W) and 24V DC (up to 72W) systems, offering versatility in different applications.
MINILED connectors provide a simple and secure connection by avoiding the need for soldering. Their design ensures a tight fit and prevents accidental disconnection during use.
The transparent finish of the connector minimises interference with the luminous flux, allowing discreet integration with LED strips and enhancing the aesthetics of the installation.
Yes, it is possible to use this cable in longer lengths by connecting it to other compatible cables. However, it is recommended to ensure that the additional length does not cause a significant voltage drop that will affect the performance of the LED strips.
During installation, the power supply must be disconnected and the correct polarity checked before making connections. In addition, avoid excessive bending of the cable or exposing it to mechanical stress to preserve its integrity.
You can calculate the maximum power if you know the supply voltage of the 24V LED Lynx strips (24V DC) and the maximum amperage admitted by the Lynx H 24V cable (they are 3A).We calculate it with the following formula: Power (W) = Voltage (V) x Amperage (A)Example: P(W)= 24V x 3A = 72W, with the maximum power it can connect with the Lynx H 24V cable is 72W at 24V DC.
The Lynx curved diffuser profile has a height of 17.4 mm, a width of 15.4 mm and a thickness of 5.9 mm. These dimensions allow the diffuser to fit perfectly over LED strips and to be securely clamped into the corresponding profile tabs.
The transparent-opaque plastic provides homogeneous light diffusion, reducing glare and shadows, while hiding the direct view of the LEDs. This enhances aesthetics and creates a soft and pleasant illumination.
Installation consists of placing the diffuser on the profile that houses the LED strip. This is done by pressure using the tabs of the profile as a support. No additional tools are required, but it is recommended to clean the surfaces before installation.
Yes, the profile can be cut to size using tools such as precision saws or plastic cutters. It is important to make clean cuts and avoid edge damage to ensure a good fit.
The curved design of the diffuser optimises light distribution, creating a more uniform effect and reducing bright spots. This makes it ideal for decorative and functional applications in furniture or interior spaces.
The Lynx Basic LED strip is ideal for applications in furniture, shelving, work or decorative areas, where efficient and uniform illumination is needed. Its high efficiency makes it suitable for projects that require low energy consumption with excellent light quality.
Cool white light (6000K) is perfect for functional spaces such as kitchens or offices, natural white light (4500K) offers balanced lighting ideal for living or sleeping areas, while warm light (3000K) is suitable for creating cosy atmospheres, such as in bedrooms or living rooms.
Before installing the LED strip, it is recommended to clean the surface with a dry or slightly damp cloth to remove dust and grease. Make sure the surface is dry and smooth to maximise adhesion of the 3M tape.
Yes, it is possible to combine several rolls of LED strip by connecting them in series or in parallel. For this, compatible connectors must be used or the connection points must be soldered. Make sure that the LED converter has sufficient capacity to support the total combined power.
To maintain the performance of the LED strip, clean it regularly with a dry cloth and avoid exposing it to moisture or excessive heat. Periodically check electrical connections to ensure safe and efficient operation.
We have a table for calculating the pistons or dampners, where you can obtain a response with the furniture data.The choice will depend on the width and the height of the door, as well as the material it is manufactured out of, in addition to the stroke of the piston or damper itself.The result will be the number of pistons or dampners and the necessary strength of each one.
You can calculate the amperage of an installation if you know the feed voltage of 24 V LED Lynx (24V DC) and the power you wish to install.We calculate the data with the following formula: Amperage (A) = Power (W) / Voltage (V)Example: A= 72W / 24V = 3A, so the maximum power I can connect is 72W to 24V DC without exceeding the 3A admitted by 24V Lynx H cable.
The Lynx recessed profile has a length of 2.35 m or 2.9 m, a width of 20 mm and a height of 10 mm. These dimensions allow standard LED strips up to 10 mm wide to be accommodated, ensuring a safe and efficient installation.
The matt anodised finish provides increased resistance to corrosion and wear, ensuring the durability of the profile. It also enhances the aesthetics of the assembly with a modern and professional look.
The profile is installed by embedding it in a piece of furniture by means of a recess or groove previously made with a milling machine or precision drill. The LED strip is then fitted, connected to the electrical system and the profile is closed with a diffuser cap, if applicable.
This profile is compatible with most standard LED strips up to 10mm wide. It is recommended to use LED strips that offer a uniform luminous flux to maximise visual results.
For a correct fit, make sure that the recess or groove has the correct dimensions. In addition, make all electrical connections before completely fixing the profile and use a suitable power converter to avoid overloading.
The Lynx Premium LED Strip is suitable for both indoor and outdoor use thanks to its IP65 certification, which protects it against dust and splashes, and its slim 8mm design that makes it easy to install in tight spaces.
IP65 certification ensures that the strip is dust and moisture resistant, making it ideal for bathrooms, kitchens or semi-covered areas, guaranteeing long-lasting performance in these conditions.
To cut the LED strip, use sharp tools and cut at the indicated marks. When connecting segments, use specific connectors for LED strips or safe soldering, making sure to maintain correct polarity and protect the connections with adequate insulation.
When combining several LED strips, it is essential to calculate the total power and select a 12V DC converter that can handle the load. It is also recommended to check the continuity of the connections to ensure smooth operation.
To keep the LED strip in optimal condition, clean it with a dry cloth and avoid using abrasive products. Periodically inspect the electrical connections and ensure that the strip is installed on a clean and stable surface.
Within the available sensor range, you can opt for a Red Eye or Point 240 V AC sensor or a Dot, Point, Micron or Twelfy 12V/24V sensor.In the case of 12V/24V DC sensors, bear in mind they will need a set of 12V/24V DC sensor accessories to be easily and quickly connected. They may convert their connections from AMP to Miniled.
The kit includes 3 clips to attach the aluminium profile to the cabinet and 2 side caps to close the ends, providing a secure installation and a professional aesthetic finish. The clips are placed over the LED strip in the trunking and hold the profile securely in place.
This kit is specifically designed for the Lynx flat diffuser profile and is not compatible with other profile models in the Lynx range. Its design ensures a perfect fit with the corresponding profile.
The brackets are fixed directly to the furniture channel. It is important to ensure that they are correctly aligned and securely fastened before the aluminium profile is pressed onto them.
The kit's parts are made of durable grey plastic, which ensures durability and an unobtrusive appearance that matches different furniture designs. This material is also easy to clean and maintain.
For a professional finish, first make the trunking in the cabinet to the precise measurements, fit the clips and LED strip in position, and finally fit the aluminium profile and side covers to complete the installation.
Warm light (3000K) creates a cosy and relaxing atmosphere, ideal for bedrooms or living rooms. Daylight (4000K) is versatile and suitable for balanced spaces such as offices or rest areas. Cool light (6000K) offers more brightness, ideal for kitchens, workshops or work areas.
Before installing the LED strip, clean the surface with a dry or slightly damp cloth to remove dust and grease. Make sure it is dry and smooth to maximise adhesion of the 3M tape.
Yes, it is possible to connect several LED strips in series or in parallel. However, the total power of the strips must be calculated and a 12V DC converter with sufficient capacity must be used to avoid overloading. It is also recommended to check the continuity of the connections.
To keep the LED strip in optimal condition, periodically wipe it with a dry cloth and avoid exposing it to moisture or excessive heat. Inspect electrical connections regularly to ensure safe operation.
The high efficiency of 124 lm/W makes it possible to illuminate large spaces with lower energy consumption, reducing electricity costs and providing uniform, high quality lighting. This is especially beneficial in projects with continuous use.
The minimum hole diameter to be made is 7 mm for the male Miniled connector to go through.If you have a female connector, the hole has to be 9 mm.
The switch operates automatically when the enclosure door is opened, switching on the connected luminaire. When the door is closed, the switch switches the light off. This simple mechanism is efficient and unobtrusive.
Yes, the switch is compatible with both hinged and sliding doors. For hinged doors, make sure that the switch is aligned with the furniture frame. In the case of sliding doors, it is important to locate it in a place where it does not interfere with the sliding of the door.
Installation is simple: the switch is screwed to the surface of the furniture in the desired position. It is advisable to use a drill with a small drill bit for pre-drilling and a screwdriver to secure the installation.
The switch is compatible with 230V AC and 50Hz luminaires. It can be used with LED strips and LED spotlights that meet these electrical specifications, ensuring a safe installation.
The compact design makes it easy to integrate into discreet furniture without affecting the overall aesthetics. The black and white finishes allow the switch to be combined with different styles and colours of furniture, providing decorative versatility.
The integrated motion sensor detects movement within a range of 2 metres and at an angle of 120°. The light switches on automatically when motion is detected and switches off 30 seconds later if no further activity is detected.
The 120° swivel mechanism allows the light beam to be directed to the desired area, making it easy to adjust even after installation, enhancing the customisation of lighting in furniture or shelving.
The luminaire uses 3 AAA batteries (included in the package). With regular use, battery life may vary, but on average can last several weeks depending on how often the sensor is activated.
Installation is simple: fix the mounting screws to the surface of the furniture using a screwdriver. Then fit the luminaire into the swivel bracket and place it in the desired position. Detailed instructions are included to facilitate the process.
This luminaire is designed for indoor use and its IP20 certification indicates that it is not resistant to moisture. It is not recommended for use in wet areas or outdoors to avoid damage to the product.
The following video shows how you can easily install the aforementioned LED lighting.
The Aquarius LED spotlight has an output of 7W, a luminous flux of 480 lumens and a cool white colour temperature of 6000K, providing bright and functional lighting for spaces such as bathrooms.
The IP44 certification ensures that the spotlight is protected against splashing water and small solid objects, making it ideal for use in wet areas such as bathrooms.
Installation is simple: the spotlight is supplied with the necessary screws to fix it to glass surfaces, table tops or furniture. Simply mark and drill the mounting points and tighten the screws to secure the spotlight in position.
The opal diffuser distributes the light evenly and eliminates reflections or glare, creating a pleasant ambience and improving the aesthetics of the lighting.
No, this LED spotlight does not need an additional converter, as it is designed to be connected directly to a 230V AC socket, simplifying installation and reducing additional costs.
The Vertikal multiconnector has three Schuko-type sockets with a maximum capacity of 3500W (16A) and two USB type A ports, with a 5V DC output (1A/port or 2x0.5A simultaneously). It is ideal for connecting household appliances, mobile device chargers and other electronic equipment.
The multi detector requires a mounting hole with a diameter of 60 mm and is compatible with surface thicknesses between 1 and 95 mm. This makes it adaptable to a wide variety of furniture in kitchens, offices and homes.
The manual extraction and concealment system allows the multicontector to retract into the cabinet when not in use, achieving a discreet integration into the surface. To use it, simply pull it gently upwards until it is accessible.
The multi detector is designed with safe and resistant materials and complies with electrical standards for 230V AC. This ensures safe continuous use, as long as the specified power limits are not exceeded.
The LED indicator provides a visual signal that the multi detector is switched on and operational, enhancing safety and preventing inadvertent use in the event of a power failure.
The following video shows how you can easily install the aforementioned LED lighting.
The integrated motion sensor detects motion within a range of 2 metres and at an angle of 120°. The luminaire automatically switches on when motion is detected and switches off after 30 seconds if no activity is detected.
The luminaire uses a rechargeable lithium polymer battery with a capacity of 850 mAh. The estimated charging time is 2 to 2.5 hours using a 5V DC 1A charger with micro USB type B connector.
The luminaire can be installed with screws on the surface of a piece of furniture or by means of an included adhesive magnet, allowing it to be easily removed for recharging. Both options are safe and practical.
The charge status LED indicates that the battery is charging when it is on. When the LED turns off, the battery is fully charged and ready for use.
This luminaire is ideal for transit areas such as corridors, wardrobes, laundry rooms or stairs, thanks to its compact design, natural white light (4000K) and motion sensor. Its simple installation and 360 cycles autonomy make it perfect for areas without direct access to electricity.
The USB Type A ports are compatible with older devices and offer standard charging, while the USB Type C port is more versatile, allowing fast charging and compatibility with modern devices.
During installation, be sure to drill a clean hole with a diameter of 60 mm and avoid applying too much pressure when tightening the fixing nut. This avoids damaging both the multi-connector and the surface of the furniture.
Electrical safety is ensured by its design to withstand up to 3600W (16A) at the Schuko socket and power regulation at the USB ports. Complies with electrical standards for 230V AC and protects connected devices.
The multi-connector can be installed on surfaces with a thickness between 1 mm and 35 mm, which makes it suitable for a wide variety of furniture and boards of different materials.
It is recommended to clean the multiconnector regularly with a dry cloth to avoid dust build-up, especially on the sliding cover. Avoid using abrasive chemicals to maintain its stainless steel finish.
The following video shows how you can easily install the aforementioned LED lighting.
The multi-connector is compatible with devices that require connection to Schuko sockets (maximum 3680W, 16A) such as household appliances, and to USB ports (5V, 2.4A) such as smartphones, tablets and fast-charging electronic devices.
The push pull-out system allows the multi-connector to be hidden when not in use. Light pressure on the top surface causes the multi-connector to lift up, providing quick access to the plugs and USB ports.
For installation, a 60 mm diameter hole is required in the surface of the furniture, compatible with thicknesses between 1 and 60 mm. Fixing is carried out by means of a manual nut without the need for tools.
The USB ports have a maximum charging capacity of 12W (5V, 2.4A) and are compatible with devices such as smartphones, tablets and electronic accessories that support standard fast charging.
The multiconnector complies with 230V AC electrical standards and is IP20 protected, ensuring safe use in dry indoor environments such as offices, kitchens and homes. It is not recommended for use outdoors or in wet areas.
The multi-connector is installed by drilling a 100 mm diameter hole in the surface of the furniture. It is compatible with thicknesses between 1 and 70 mm. No additional tools are required, as the fixing is carried out by means of a manual nut included in the product.
The integration of Schuko sockets and USB ports in a single device allows charging various electronic devices and connecting household appliances without the need for additional adapters, optimising space and functionality.
The multi-connector is designed to efficiently distribute the total power (3680W for the plugs and up to 20W for the USB ports) in a safe way, avoiding overloads by means of an internal system that automatically regulates the electrical flow.
To keep the device in good condition, it is recommended to clean the surface regularly with a dry cloth and avoid using abrasive products. Periodically check the extraction system to ensure that it is working without obstructions.
The power strip is certified for electrical safety for 230V AC and IP20 protection, ensuring safe use in dry indoor environments. In addition, its design prevents overloading and ensures the protection of the connected devices.
The following video shows how you can easily install the aforementioned LED lighting.
The multi-connector includes:
2 Schuko-type sockets (max. 3000W, 13A) for household appliances and electronic equipment.
1 USB Type A and 1 USB Type C port for charging devices (max. 15W).
1 HDMI 2.0 connector for high-definition video transmission.
1 unshielded RJ45 port for standard Ethernet connections.
To install it, the cabinet must have a space of 225x111 mm and a maximum thickness of 36 mm. The multi-connector is fixed with brackets and screws included, and no additional tools are required for final adjustment.
The USB ports are compatible with devices such as smartphones, tablets and electronic accessories. Maximum charging capacity is 15W (5V/3A, 9V/2A, 12V/1.5A), enabling fast charging on compatible devices.
The auto-lift lid allows easy access to connectors and sockets with a simple touch. When not in use, the cover hides the ports to maintain a clean and tidy appearance.
The RJ45 connector is suitable for standard networks, but because it is not shielded, it is more susceptible to interference in environments with high electromagnetic emission. It is recommended for home or office use where interference is minimal.
The Lynx W diffuser profile is designed with precise dimensions to perfectly fit 8 mm wide LED strips, ensuring a secure installation and a movement-free fit within the Lynx W aluminium profiles.
The translucent polycarbonate material allows for an even distribution of light, eliminating visible light spots and creating homogeneous illumination. It is also strong, durable and easy to clean.
Yes, the Lynx W diffuser profile can be cut to size. For a clean and precise cut, it is recommended to use a fine-toothed saw or a specific cutting tool for polycarbonate.
This diffuser profile is ideal for applications in home furniture, offices, kitchens and bedrooms, where integrated and discreet lighting is desired. It is perfect for cabinets, shelves and under kitchen furniture.
By using the Lynx W diffuser profile, the light from the LED strips is evenly distributed, eliminating glare and improving the aesthetics of the lighting project. This results in soft and professional lighting in any space.
The following video shows how you can easily install the aforementioned LED lighting.
To install the Lynx W profile, the furniture must be machined to a width of 14 mm and a depth of 11 mm. These dimensions guarantee a perfect and secure fit of the profile.
The aluminium profile with painted or anodised finish offers high resistance to corrosion and wear. In addition, its finish enhances the aesthetics and can be combined with different styles of furniture.
Yes, the Lynx W profile can be cut to size. It is recommended to use a thin-cutting saw or aluminium specific tools to obtain a clean cut and avoid deformation.
This profile is ideal for lighting projects in kitchen furniture, wardrobes, offices and bedrooms. Its design allows discreet integration of LED strips, providing functional and decorative lighting.
The Lynx W profile is designed to be compatible with Lynx Q and Z sensors and cables, ensuring easy installation and optimal operation of the lighting system.
The Lynx W surface-mounted profile is installed using screws directly into the furniture. It is recommended to use a drill for pre-drilling and a screwdriver to tighten the screws.
The painted or anodised finish provides corrosion resistance and high quality aesthetics. This makes it ideal for projects where design and durability are important.
Yes, the profile can be cut to size. To ensure a clean cut, it is recommended to use a fine-toothed saw or a specialised aluminium tool and to protect the edges of the profile with adhesive tape during cutting.
The Lynx W profile is compatible with 8 mm wide LED strips and accessories such as Lynx Q and Z sensors and cables, ensuring simple and functional integration.
This profile is ideal for lighting projects in kitchen furniture, wardrobes, offices and bedrooms, offering a decorative and functional solution for surface lighting.
The following video shows how you can easily install the aforementioned LED lighting.
The fittings are designed as end caps for the Lynx W profile, providing a uniform finish and concealing visible connections. They also facilitate cable routing thanks to their grooved design.
These fittings are small enough to integrate perfectly with 8mm wide LED profiles and strips and are compatible with Lynx Q and Z sensors and cables.
Installation is simple: just insert the end caps into the ends of the Lynx W profile and feed the cables through the groove of the fitting. This ensures a tidy and functional electrical connection.
They are available in white, black and grey finishes, allowing them to be combined with different styles of furniture to maintain a homogeneous aesthetic.
These fixtures are ideal for home, office and bedroom furniture applications where integrated lighting and discreet, professional finishes are required.
The Lynx W accessory kit includes two side covers and mounting screws. Their main function is to provide a uniform finish to the Lynx W surface profile and to facilitate the cable routing of the LED strips.
The fixtures are designed for 8 mm wide LED strips, with a small footprint for perfect fit and easy integration into Lynx Q and Z profiles and systems.
The lower cable outlet, equipped with a groove, allows the cables to be routed neatly and safely, facilitating the electrical connection and improving the aesthetics of the project.
The accessories are available in white, black and grey finishes, offering versatility to match different furniture styles and maintain a cohesive design.
Yes, installation is simple and requires no specialised tools. The package includes the screws required to attach the covers to the Lynx W surface profile, ensuring a quick and secure installation.
The following video shows how you can easily install the aforementioned LED lighting.
The integrated front LED lighting of the Pegasus mirror has a colour temperature of 4000K, providing natural light that enhances visibility and brings out facial detail without creating distracting shadows.
The mirror has an anti-corrosion treatment and an IP44 protection rating, which makes it resistant to moisture and splash water, ideal for wet environments such as the bathroom.
The dimensions of the mirror are 600 x 700 mm, with a glass thickness of 4 mm, making it a compact and stylish solution for bathrooms of any size.
The package includes the mirror, brackets, dowels, installation hooks and detailed instructions. A drill and screwdriver are recommended for safe installation.
This mirror is perfect for residential and commercial bathrooms, thanks to its modern design, functional lighting and resistance to wet conditions, offering durability and style.
The Cassiopeia mirror's integrated anti-fogging system prevents condensation from forming on the surface, keeping it clean and functional even in bathrooms with high humidity after hot showers.
The decorative LED backlighting, with a colour temperature of 4000K, creates a warm and modern atmosphere, ideal for enhancing bathroom lighting without creating shadows and providing a sophisticated aesthetic design.
The mirror has a diameter of 60 cm and a thickness of 4 mm, making it a compact and stylish solution for bathrooms of any size, from residential to commercial.
The package includes the mirror, brackets, dowels, installation hooks and detailed instructions. A drill, levelling tool and screwdriver are recommended for installation.
This mirror is ideal for domestic bathrooms and hotels, thanks to its resistance to moisture and splashes (IP44), combined with an elegant design that adapts to modern and minimalist styles.
For the same force required in both folding and lift up doors, we recommend that you only use a single piston or damper in a door with a width of less than 450 mm, and that you use two pistons or dampers for a door that is wider than 450 mm.
The following video shows how you can easily install the aforementioned LED lighting.
The Crux-in LED spotlight runs directly on AC 230V 50Hz, eliminating the need for a converter. This simplifies installation and makes it more efficient for furniture and interior spaces.
Its dimensions are 65 mm in diameter at the base, with a thickness of 11.5 mm and a 1.4 mm flange for discreet recessing. Its compact design ensures a stable installation and a professional finish.
The spotlight emits a cool white light of 6000K with a power of 1.8W and a luminous flux of 116 lm, providing a bright and suitable illumination for functional spaces such as kitchens, cupboards and offices.
The package includes 1 LED luminaire, installation screws and bracket. It is recommended to have a drill and screwdriver to fix the spotlight securely to the furniture.
This spotlight is ideal for applications in kitchen cabinets, cupboards, display cabinets and shelves, where functional lighting is needed. Its minimalist design and resistance (IP20) make it perfect for dry and protected interiors.
COB (Chip On Board) technology eliminates visible spots in the light, providing uniform and continuous illumination, ideal for applications where an aesthetic and homogeneous finish is required.
The Lynx Premium COB LED Strip requires a 24V DC converter for installation. This voltage ensures correct operation and efficient performance.
The LED strip can be cut every 55.5 mm, allowing precise customisation to suit the needs of each project, maximising material utilisation.
It is ideal for applications in built-in or surface furniture, especially in projects requiring continuous or curved lines, thanks to its flexibility and adaptability.
The strip is made of a double-layer PCB and 3M® 300LSE adhesive tape, which guarantees a strong and stable fixation on aluminium surfaces or other compatible materials.
Yes, they are compatible with all the accessories.Please note: Lynx Premium and Basic LED strips of 4.8 W/m, 9.6 W/m and 14.4 W/m are 8 mm wide, while the Lynx Premium LED strip of 28.8 W/m is 10 mm wide.
The Lynx Z connector is compatible with LED strips operating at 12V DC or 24V DC, providing flexibility for different lighting applications.
Its small dimensions make it perfect for joining 8 mm wide LED strips, ensuring an unobtrusive and efficient installation.
The connector offers a solid and strong connection thanks to its metal connectors, designed to provide a secure and durable connection.
The transparent finish minimises the reduction of luminous flux, allowing uniform illumination without visible interference in the final design.
No additional tools are required to install the Lynx Z connector. The connection is made quickly and easily by aligning the LED strips and fitting them into the connector.
The Lynx Z LED cable supports a maximum power rating of 36W at 12V DC (3A) and 72W at 24V DC (3A), offering versatility for various lighting configurations.
The integrated MiniLED connector allows quick and secure connections without the need for additional tools, optimising installation time.
The transparent finish minimises the reduction of luminous flux, ensuring uniform illumination without visual interference.
This cable is compatible with 8mm wide LED strips, making it ideal for projects that use Lynx W profiles and require discreet and efficient connections.
It is important to ensure that the connections are correctly aligned and that the ends are securely snapped into the MiniLED connector to avoid disconnection or loss of electrical signal.
Yes, they are compatible with all the aluminium and diffuser profiles for LED strips.
The Lynx W recessed profile requires 14 mm width and 11 mm depth machining in the cabinet for proper installation.
The Lynx W diffuser profile is made of polycarbonate, which homogenises the light and eliminates visible spots, ensuring uniform illumination.
This profile set is compatible with 8mm wide LED strips and is ideal for lighting projects in home furniture, offices, wardrobes and bedrooms.
The recessed profile is made of aluminium with a matt RAL 9016 finish, while the diffuser profile is made of polycarbonate, materials that offer high durability and resistance to wear and tear.
Yes, the profile can be cut to size. It is recommended to use a thin-cutting saw or a specialised aluminium tool for precise and clean cuts.
The Lynx W surface profile set is installed by screwing it directly onto the surface of the furniture. It is a simple process that requires no additional machining.
The Lynx W diffuser profile is made of polycarbonate, which allows a uniform diffusion of light, eliminating visible spots and providing homogeneous illumination.
This profile set is compatible with 8mm wide LED strips and Lynx Q and Z sensors and cables, making it ideal for multiple lighting projects.
The profiles are made of aluminium with matt finish RAL 9016 and polycarbonate, materials that guarantee high wear resistance and a long-lasting aesthetic appearance.
Yes, profiles can be cut to size. It is recommended to use tools such as thin-cutting saws or specialised tools for aluminium and polycarbonate to obtain clean and precise cuts.
You can calculate the maximum power if you know the supply voltage of the LED strips (12V DC) and the power that you want to install using the following formula: Amps (A) = Power (W) / Voltage (V)Example: A= 48W / 12Va A= 4AThe maximum power that I can connect is 48W at 12V DC.
To install the Lynx profile set, a 20 mm wide and 11 mm deep cut-out in the cabinet is required.
End caps for the profiles are not included in the kit and must be purchased separately.
The matt anodised finish provides a corrosion and wear resistant surface, as well as an elegant and uniform appearance.
Yes, profiles can be cut to size. It is recommended to use an aluminium thin-cutting saw or a specialised cutting tool to ensure precision and clean edges.
Once the profile has been machined, it is embedded in the furniture. It does not require additional screws for fastening, as it is secured by pressure or tightening.
The Lynx surface profile set is installed by screwing the aluminium profile directly to the surface of the furniture, which ensures simple and fast installation.
The curved diffuser profile is 17.4 mm wide and 4.4 mm high, while the aluminium profile is 18 mm wide and 10.7 mm high. Both have a length of 2.35 m.
End caps are not included in the kit and must be purchased separately if a more aesthetic finish is required.
The matt anodised finish provides increased wear resistance, corrosion resistance and a modern and elegant look that suits different furniture designs.
Yes, the profiles can be adjusted to specific dimensions by cutting them with specialised tools, such as a thin-cutting saw for aluminium or a precision hand-held cutting tool, ensuring clean, burr-free edges.
No, it is only compatible for 8 mm wide LED strips
The Lynx surface inclined profile set is compatible with 8 mm wide LED strips, ideal for decorative and functional lighting systems.
The included aluminium profile has a slanted design that facilitates the orientation of the light towards the interior of the furniture or installation area, optimising the illumination.
Yes, the curved diffuser profile is designed to homogenise the light emitted by the LED strips, eliminating visible spots and achieving uniform illumination.
For installation, we recommend tools such as an electric screwdriver to screw the profile to the furniture and a thin-cutting saw to adjust the length of the profile if necessary.
No, the kit does not include screws. These must be purchased separately to complete the assembly of the profiles on the furniture surface.
No, the Gemini LED spotlight does not require a transformer, as it is powered directly by 230V AC.
This LED spotlight features IP44 protection, making it resistant to moisture and splash water, ideal for bathroom environments.
Yes, the Gemini spotlight is designed to be mounted on both furniture and glass surfaces, using the elements included in the mounting kit.
The kit includes the luminaire, an IP44 junction box, screws and accessories required for installation on different surfaces.
Yes, the opal diffuser homogenises the light emitted, eliminating bright spots and providing uniform and pleasant illumination.
No, only the Lynx H cables and connectors that are 8 mm wide are compatible with aluminium and diffuser profiles for LED strips.
The Aries LED spotlight has dimensions of 300 mm in length, making it ideal for medium to large surfaces, fitting standard bathroom furniture and mirrors.
No, the Aries LED spotlight does not require an additional converter, as it operates directly on 230V AC power, simplifying installation.
The integrated opal diffuser homogenises the light, eliminating glare and shadows, ensuring uniform and pleasant illumination.
Mounting is by means of a multi-functional attachment which allows the spotlight to be fixed to glass, wood or boards using the included screws and IP44 connection box.
Yes, although the Aries spotlight is designed to be durable, it is possible to purchase compatible accessories and components in case of damage or wear and tear.
The Virgo LED spotlight has a length of 300 mm, making it compatible with standard mirrors and furniture in bathrooms and other interior spaces.
IP44 protection ensures that the spotlight is resistant to moisture and splash water, making it ideal for use in bathrooms or other wet areas.
Yes, the spotlight includes all the elements necessary for installation, such as screws, multifunctional bracket and mounting instructions.
The Virgo spotlight's mounting system is compatible with glass, wood or board surfaces, allowing it to be installed on a wide variety of furniture.
Yes, the design and functionality of the Virgo spotlight also make it suitable for other environments such as kitchens or corridors, providing uniform and decorative lighting.
You can calculate the maximum power if you know the supply voltage of the LED strips (12V DC) and the power that you want to install using the following formula: Amps (A) = Power (W) / Voltage (V)Example: A= 60W / 12Va A= 5AThe maximum power that I can connect is 60W at 12V DC.
The Schuko-type plugs of the Atom 26 Lite multi-connector have a maximum load capacity of up to 3,000 W (13 A), making them suitable for household appliances and devices with high power consumption.
No, the Atom 26 Lite does not include an internal overload protection system. It is recommended to connect the device to a mains power supply with additional safety measures if necessary.
The USB Type A and Type C ports enable charging of electronic devices such as smartphones, tablets, smart watches and other compatible equipment with a 5 V DC output (1 A and 2x 0.5 A).
To install the Atom 26 Lite multi-connector, a machining operation is required in the cabinet with dimensions of 225 x 111 mm, ensuring correct fixing by means of brackets and screws included in the scope of supply.
No, the automatic lift cover is integrated and is not replaceable or customisable, as it is part of the design and functionality of the product.
The Multiconnector One requires a minimum diameter of 54 mm to be machined into the surface of the cabinet to ensure correct installation.
The included connection cable has a length of 3 metres and is equipped with an angled connector for convenient and efficient installation.
Yes, the Schuko (EU) plug of the Multiconnector One has an integrated child safety feature, which prevents accidental insertion of objects into the socket.
Yes, the Multiconnector One is designed to be installed on surfaces with a thickness of 9 mm or more, thanks to its innovative fixing system that fits securely.
It is recommended to install the Multiconnector One on flat, solid surfaces made of materials such as wood, melamine, MDF or resistant plastic, which ensure a stable and durable fixation.
The LED Lynx strip with a variable colour temperature has a controller that makes it possible to select a colour temperature of cool white, natural white or warm white, in a range between 3,000 Kelvin and 6,000 Kelvin.
The Multiconnector Circle 80 requires a machining diameter of 80 mm to be installed correctly on the surface of the furniture.
The device includes an integrated child safety system, which protects the Schuko (EU) socket against accidental insertion of objects.
The USB Type-A and Type-C ports allow charging devices with a combined maximum power of 5W. Up to two devices can be charged simultaneously, each with a current of up to 2.1A.
The connection cable has a length of 3 metres, equipped with an angled connector for easy connection to a 230V AC power supply.
Yes, the Circle 80 Multiconnector is designed to be installed on surfaces with a minimum thickness of 10 mm, thanks to its top screw fixing system.
The installation of the Backflip Multiconnector requires a machining with dimensions of 88x215 mm, suitable for its correct integration in the furniture.
This device can be installed on surfaces with a thickness between 10 mm and 40 mm, guaranteeing flexibility for different types of furniture.
Yes, its flip-up design allows the sockets to be kept hidden when not in use, providing a sleek and discreet appearance.
The Backflip Multiconnector includes 2 Schuko (EU) sockets with a maximum power of 3600W (16A) and 1 USB type A port, which allows charging devices with a power of 5W and a maximum current of 2.1A.
The connection cable has a length of 3 metres, making it easy to install in various locations and to connect to a 230V AC 50Hz power supply.
With this table you can calculate the total power of an LED strip.
The Multiconnector V Dock has 3 Schuko (EU) sockets with a maximum permissible power of 3600W (16A), allowing multiple devices to be safely connected.
Yes, the design of the Multiconnector V Dock allows it to be installed both horizontally and vertically, screwed onto the surface of the furniture.
This multi-connector includes built-in child safety, preventing accidental access to the inside of the sockets and providing added protection.
The power cable is 3 metres long, with an angled connector for easy connection to a 230V AC 50Hz power supply.
The matt anodised finish of the Multiconnector V Dock provides a sleek, modern aesthetic and offers increased resistance to corrosion and everyday wear and tear.
The integrated motion sensor in the Kaus LED wall light has a detection range of 2 metres and an angle of 120°, allowing the luminaire to switch on automatically when it detects movement.
The rechargeable battery has a capacity of 850mAh, providing a battery life of up to 400 power-on cycles of 18 seconds each. It is recharged via a micro USB Type-C cable (included), with a charging time of approximately 2 hours using a 5V DC 1A charger (not included).
Yes, the Kaus LED wall light allows you to adjust the colour temperature between 3000K, 4000K and 6000K, with a simple touch of the sensor button to switch between the available options.
The Kaus LED wall light does not require screws, as it is easily installed with the included adhesive metal bases. This allows a magnetic fixation that facilitates both installation and removal for recharging.
The wall light's twilight sensor is activated when the ambient light is below 250 Lux, ensuring that the luminaire is only switched on when it is really needed, thus optimising battery consumption.
The maximum recommended length of the installation of LED strips is indicated in our catalogue with a symbol on each LED strip.The table outlines the maximum recommended length if the power supply is only provided via one length (a converter). It also outlines the maximum recommended length if the power supply is provided via both ends (two converters) that multiply by two.Please note: To power the strip via both ends you need to create a special connection. Look up how can to ensure that the LED strip has the same brightness all along it.
The proximity touch sensor integrated in the Kaus LED wall light switches the luminaire on when it detects movement at a distance of 7 cm. To switch it off, simply wave your hand in front of the sensor again.
The rechargeable battery has a capacity of 850mAh, offering a battery life of up to 400 power-on cycles of 20 seconds each. Charging time is approximately 2 hours using a conventional 5V DC 1A mobile phone charger (not included) and a micro USB type C cable (included).
Yes, the wall light allows you to adjust the colour temperature between 3000K, 4000K and 6000K with a touch of the touch sensor. This allows it to adapt to different lighting needs.
The package includes a rechargeable LED wall light, as well as adhesive metal bases and screws for optional mounting. It is easily installed by attaching it to metal surfaces or using the included adhesive tapes, without the need for additional tools.
The proximity sensor has a detection range of 7 cm and automatically switches off after detecting a second movement, optimising battery usage and ensuring efficient power consumption.
The Rigel LED luminaire's vibration sensor is automatically activated when the drawer is opened by detecting movement, and switches off after 12 seconds without detecting additional vibrations.
The rechargeable lithium polymer battery has a capacity of 850mAh, offering an autonomy of 600 power cycles per full charge. Charging time is approximately 2 hours using a 5V DC 0.5A USB charger and the included micro USB type B cable.
The luminaire can be installed in two ways:
With screws, for fixed mounting inside the drawer.
With double-sided adhesive tape or adhesive magnet, allowing tool-free mounting and easy removal for recharging.
Included in the package: a rechargeable LED luminaire, screws, adhesive magnet and double-sided adhesive tape. These options ensure quick and easy mounting without the need for additional tools.
No, this luminaire is designed for dry areas and is ideal for drawer or cabinet interiors. Its IP20 rating does not make it suitable for wet or outdoor environments.
The Centaurus mirror features 4,000K decorative LED backlighting, which provides a uniform, shadow-free, natural white light, ideal for improving visibility in the bathroom or any space in the home.
Yes, the Centaurus mirror is designed for wet environments, as it has an IP44 rating, making it resistant to moisture and splashing water.
The dimensions of the mirror are 800 x 600 mm, with a glass thickness of 4 mm. In addition, a 1 metre long power cable is included.
Yes, the design of the mirror allows it to be installed both vertically and horizontally, adapting to different space and style configurations.
Package includes:
1 Centaurus mirror
Mounting brackets and plugs
Installation hooks
Detailed installation instructions. This facilitates quick and safe installation.
The Zeus mirror features decorative LED backlighting that projects a natural white 4,000K light, providing uniform, shadow-free illumination, ideal for bathrooms or decorative spaces.
Yes, the Zeus mirror is designed for wet environments thanks to its IP44 protection rating, which makes it resistant to moisture and splashing water.
The mirror has a diameter of 800 mm, a glass thickness of 4 mm and a 1 metre long power cable.
The decorative frame of the mirror is made of aluminium, with a black lacquered finish, giving it an elegant and modern design.
Package includes:
1 Zeus mirror
Mounting brackets and plugs
Installation hooks
Detailed installation instructions.
This ensures quick and easy installation.
Yes, they are compatible. But, it is necessary to bear in mind that the Lynx sensors have different dimensions.In the case of the Motion sensor, the position of the lens has been changed but the dimensions have been maintained. When it comes to machining the diffuser it is necessary to bear in mind that the lens protrudes from it, the diameter of 10 mm is maintained but the position changes to 15 mm.In the case of the Touch and Dimmer sensors, there are no changes that affect assemble and the new Lynx sensor can be mounted where the previous sensor was mounted.
LED strip cut length: The Lynx Premium LED strip can be cut every 3 LEDs (2.5 cm), which allows it to be adapted to different dimensions of furniture or cabinets.
Operation of the DOOR and SWITCH sensors:
DOOR Sensor: Detects the opening or closing of doors to automatically switch the lighting on or off.
SWITCH sensor: Activated when you pass your hand over its detection range, allowing tactile control.
Energy efficiency of the LED strip: The LED strip has an output of 9.6W/m and an efficiency of 84 lm/W, offering a luminous flux of 805 lm/m and uniform illumination with no visible spots.
Input voltage compatibility: The kit includes converters that accept input voltages from 100-240V AC (50-60 Hz) and generate a constant 12V DC output, making it compatible with different markets.
Ideal surfaces for installation: This kit is designed to be installed in wooden furniture, cabinets, or any flat surface where automatic lighting is needed. Its compact profile is ideal for indoor spaces.
The following video shows how you can easily install the aforementioned LED lighting.
The Airtop 2 Charger is compatible with all devices that support Qi wireless charging technology, such as Qi-enabled smartphones and headsets.
The charger requires a machining of D. 60 mm for installation on a flat surface, ideal for workbenches or office furniture.
Yes, the charger allows you to charge one device via the wireless cradle and another device connected to the USB Type A port simultaneously.
The charger features overheating and overcharging protection to ensure safe use while charging electronic devices.
The included power cable has a length of 1.8 metres, providing enough reach to connect the charger to a nearby power outlet.
The integrated motion sensor has a detection range of 2 metres and an angle of 120°. The luminaire automatically switches off 18 seconds after motion is no longer detected.
The 850mAh lithium polymer battery fully recharges in less than 2 hours using a 5V DC 1A USB charger (not included).
No, the luminaire does not allow the light intensity to be adjusted manually, but the twilight sensor ensures that the luminaire switches on only when the ambient light is insufficient.
The wall light is compatible with adhesive metal surfaces or with screws in materials such as wood or glass. The magnetic system facilitates installation and removal.
The battery has an estimated autonomy of 400 on/off cycles per full charge, and its lifetime depends on usage and charging conditions.
The touch sensor for LED strips has a detector that reacts when a human hand approaches it.The light will switch on when the sensor detects a human hand within an area of 0 to 2 mm and it will switch off when it detects it again.The sensor self-calibrates using potential difference, that is to say, its takes into account the objects and the distance between the hand and the sensor the first time it is turned on.If you want to change it, you need to reset the sensor. To do that, you need to disconnect the touch sensor from the electrical network (by disconnecting the sensor from the converter from the network or the power control switch of the residence), wait for 5 seconds and connect it again so that the sensor auto calibrates.
The proximity touch sensor is activated when you pass your hand over a distance of 7 cm, switching the luminaire on. If you swipe your hand again, it switches off automatically.
The 850mAh rechargeable lithium polymer battery has a battery life of approximately 400 on/off cycles per full charge.
The wall light can be easily attached to metal surfaces using the included magnetic adhesive bases. It can also be installed using screws for greater stability on non-metallic materials.
Yes, the luminaire allows manual adjustment of the colour temperature between 3000K, 4000K and 6000K by pressing the dedicated button.
The applique is recharged using a 5V DC 1A USB charger (not included) and a 30cm micro USB Type C cable (included). Full charge time is less than 2 hours.
The Linky connector allows three types of mounting: recessed in the surface, installation on the side of the furniture or below the surface, offering flexibility according to the design of the furniture.
Precise machining of 81x12 mm is required, suitable for installing the connector correctly.
Yes, it has overload, overheating and short-circuit protection systems, ensuring the safety of devices while charging.
Yes, this connector supports fast charging via the USB C port, with a maximum power of 10W (5V/2A), ideal for charging devices efficiently.
The kit includes a charging base, a 1.8 metre USB cable, a wall charger, flush-mounted and surface-mounted cover caps, screws and fasteners required for mounting.
When this happens, it is necessary to bear in mind that the controller switches on the output switch when it detects the movement of a human body.That is to say, the controller does not detect the movements of objects, for example the movement of a door.Also, in order for it to detect movement, it is necessary to cut across its detection range. The MOTION sensor has a detection range of 2 metres and an angle of 90º.
Yes, the luminaire is adjustable in length between 462 and 468 mm thanks to the lateral brackets, allowing it to be adapted to the width of the drawer or cabinet.
The integrated proximity sensor allows the luminaire to switch on automatically when the drawer is opened and off when the drawer is closed, improving convenience and energy savings.
No, the 500 mm cable entry profile is specifically designed to be installed at the rear of the drawer, ensuring that it does not interfere with the movement of the drawer.
The luminaire is mainly made of matt anodised aluminium and plastic, guaranteeing durability and a modern design.
The luminaire has an IP20 protection rating, making it ideal for installation in dry interior spaces such as cupboards or drawers.
The Quasar LED luminaire has a fixed colour temperature of 4,000 K, ideal for creating a relaxing and comfortable atmosphere.
The swivelling spotlight is controlled by an integrated touch switch with two modes: a short press for ambient light and a long press to activate the reading spotlight.
The installation of the bracket on the headboard of the bed is simple, as it only requires fixing with screws (included in the package) and the necessary wiring.
Yes, a 12V DC LED converter is required for operation, which is not included in the scope of delivery.
The luminaire is made of anodised aluminium and high quality plastic, which guarantees strength and durability.
The following video shows how you can easily install the aforementioned LED lighting.
The Algol flexible LED spotlight emits a natural white light with a colour temperature of 4,000 K, ideal for providing a relaxing and comfortable reading environment.
The USB port (5V DC - 1A Max) allows you to charge electronic devices such as mobile phones, tablets or e-readers while using the luminaire.
Installation is simple and is done by attaching the bracket to the headboard with the included screws. The spotlight can be easily adjusted to the desired location thanks to its flexibility.
Yes, a 12V DC LED converter is required for operation, which is not included in the package.
The spotlight is made of black textured plastic, which gives it a modern appearance and a flexible design for easy orientation.
The Neonlynx LED strip is 6mm wide by 6mm deep, allowing it to be integrated into furniture recesses. It is available in 1m, 3m and 5m lengths, with a flexible design that allows for curved or straight shapes.
Yes, thanks to its IP65 protection rating, the strip is waterproof and suitable for installation in damp or outdoor locations.
It requires a 24V DC power supply, for which an LED converter is necessary, which is not included in the scope of delivery.
The Neonlynx LED strip has an efficiency of 87 lm/W, emits a luminous flux of 210 lumens per metre, and has an output of 7.2 W/m.
It is connected via 1.5 m power cables pre-installed at both ends. The strip includes fixing jumpers for panel mounting and requires no soldering due to its optimised design.
The following video shows how you can easily install the aforementioned LED lighting.
The Neonlynx H LED strip uses high quality silicone, which maintains light uniformity, protects against moisture and helps control colour temperature variation.
It can be cut every 33.5 mm, which allows great versatility to adjust it to any size required in the installation.
It offers a natural white colour temperature (4,000 K) with an illumination angle of 120°. Its illumination is uniform and without visible spots.
No additional connectors are included, but the strip has 1.5m power cables at both ends for easy connection.
Yes, it is compatible with dimmer systems, optimising energy consumption according to the user's needs.
The Plugy USB connector requires a 25 mm diameter machining in the cabinet for proper installation.
USB Type A and Type C ports allow you to charge electronic devices such as phones, tablets and other devices compatible with Fast Charge 3.0, with a maximum power output of up to 20W.
Yes, it is compatible with 24V DC power systems. Requires a 24V DC to 36W or 30W converter, depending on the configuration installed.
No, the power adapter required for operation is not included in the package and must be purchased separately.
It is available in black painted plastic and painted aluminium finishes, offering high wear resistance and a modern design for different furniture styles.
In order to control the RGB LED strip you need an RGB controller with a radio frequency remote control. If in the facility there are two controllers they can both be controlled with a single remote as all the controllers have the same frequency.
The AirTop 2 Wireless Charger requires 60 mm diameter non-through machining for installation.
The surface on which it is installed must have a maximum thickness of 2 mm to ensure efficient wireless charging.
The charger is compatible with electronic devices that support Qi wireless charging technology, such as smartphones, tablets and other modern gadgets.
The package includes 1 charging base with 1.5 m cable, 1 positioning sticker and 1 wall charger for electrical connection.
Yes, the AirTop 2 charger has built-in overcharge and short-circuit protection systems, ensuring the safety of both the device and the charger.
Yes, the Heracles mirror is designed to be installed in both vertical and horizontal orientation, adapting to different bathroom configurations.
The mirror is 5 mm thick, which guarantees high resistance and durability against possible impacts.
Yes, the integrated touch switch includes an anti-fogging function, which prevents condensation from building up on the front surface of the mirror.
The mirror has an IP44 protection rating, which makes it resistant to moisture and splash water, ideal for wet environments such as bathrooms.
The package includes 1 mirror, brackets, dowels, installation hooks and instruction manual.
In order to choose the correct converted for an LED strip it is necessary to:
- Know the type of converter that corresponds to the LED strip. In our catalogue we indicate on each light the type of converter or transformer that must be used with a series of icons.
- Find out the total power required of the converter (6 W, 15 W, 30W, 50W, 72W, 100W, 200W). In order to calculate the power of a specific length of strip, it is necessary to know what the total power of the 5m roll is (our sale unit) and what is the length of it that we need for installation.
For example:If a 5 m strip (a roll) has a power of 24 W and I need will be for the installation a 2 m strip:
X= (2m x 24W) / 5m = 9,6W
Therefore, I will choose the 15W converter. Attention, it is necessary to add up the consumption amounts of the different strip accessories if they are included in the fitting.
Lynx Premium COB LED strip provides uniform illumination with no visible LED spots, ideal for creating continuous lines of light in decorative and functional applications.
The strip requires a 12V DC LED converter for operation, as it is not included in the scope of delivery.
The LED strip can be cut into segments every 25 mm, making it easy to customise according to the available space and installation.
It is available in colour temperatures of 6,000K (cool white) and 2,700K (warm white), allowing it to adapt to different environments.
It is manufactured on a double-layer PCB and equipped with 3M® 300LSE adhesive tape, which guarantees excellent adhesion to different surfaces and high durability.
The Lynx Q LED cable supports a maximum load capacity of 12V DC - 3A (36W Max) and 24V DC - 3A (72W Max) and is compatible with MiniLED connections.
This cable is designed with reduced dimensions to join 8 mm wide LED strips, ensuring a perfect fit and functionality.
Its length is 1.5 m, which facilitates installation in different configurations, providing flexibility in lighting projects.
The built-in connector allows for quick, easy and secure connection, reducing installation time and eliminating the need for additional tools.
Yes, Lynx Q cable is fully compatible with Lynx W profiles and similar LED lighting systems, ensuring versatility in projects.
This converter has a maximum power of 60W with 12V DC output, distributed among its 6 MiniLED outputs, allowing multiple LED devices to be connected simultaneously.
The converter is designed with IP20 protection, ideal for dry areas, and features an efficient power factor that optimises energy consumption in lighting projects.
It is compatible with Type C plugs and IEC 60320 C7 connectors, offering flexibility in connection via its 2 metre power cable. It also allows other cables for different plugs to be connected.
With compact dimensions of only 16.5 mm thick, the converter can be easily concealed in narrow areas or behind furniture, maximising the available space.
It incorporates protection against overloads, electrical interference and short circuits, ensuring safe and stable operation, even in heavy use scenarios.
The sensor uses infrared technology with a detection range of 5 cm, offering precise, non-contact activation.
It is ideal for applications in panels, headboards, kitchen furniture and different rooms in the home, thanks to its versatile and compact design.
Installation requires a Ø8 mm drill hole in the surface of the material. Includes a 2.5 m cable and a 6-input MiniLED distributor for easy mounting.
Supports 12V DC and 24V DC voltages, with a maximum power of 36W or 72W, depending on the connected LED system.
It is protected against electrical and electromagnetic interference, ensuring stable operation even in environments with high levels of electrical noise.
The sensor dims with a short press to switch the luminaires on/off and a long press to adjust the light level.
Installation requires a Ø12 mm drill hole in the furniture. Includes a 1.5 m cable and a 6-input MiniLED distributor.
It supports 12V DC and 24V DC voltages, with maximum power ratings of 36W for 12V and 72W for 24V.
Yes, the sensor has a memory function that saves the last set intensity after switching it off.
It is ideal for panels, headboards and furniture in general, integrating perfectly in different rooms of the home.
The sensor requires an installation diameter of 14 mm to be recessed in the furniture.
Yes, it includes a blue LED light that makes it easy to locate the sensor in the dark.
12V DC or 24V DC luminaires can be connected, with maximum wattages of 36W (12V) and 72W (24V).
Dimming is activated by a short press to switch on/off and a long press to adjust the light level.
The sensor complies with IP44 protection measures and is designed for low power consumption, ensuring safety and efficiency.
The sensor is compatible with 8mm wide LED strips operating at 12V DC or 24V DC.
The control is done by a short press to switch on/off and a long press to adjust the light intensity level.
Yes, it includes a mechanical switch to turn the blue LED beacon on or off if you do not want it to be active.
The sensor is designed for 8 mm wide LED strips, ideal for integration into Lynx W profiles.
The integrated connector allows a fast, safe and efficient connection, facilitating the installation of LED strips.
The sensor automatically switches the light on when it detects movement of a human body within its detection range and switches it off after 30 seconds without detection.
Detects motion in a range adjusted to human movement, ideal for profile and furniture applications.
The light remains on for 30 seconds after motion detection ceases.
It is compatible with 8 mm wide LED strips for both 12V DC and 24V DC systems.
Includes a motion sensor, a MINILED distributor with 6 inputs, screws and a 1.5 m cable with Miniled connection.
The distributor cable allows up to 6 LED luminaires to be connected and managed simultaneously via a single 12V or 24V sensor.
It uses a Miniled connection, ideal for LED lighting systems compatible with this type of connection.
Yes, it is fully compatible with Miniled sensors operating on 12V DC and 24V DC.
The cable is 10 cm long, making it easy to connect several luminaires to a single sensor output.
The kit includes 1 distribution cable with 6 outlets and 1 inlet with Miniled connection, made of plastic with black finish.
Yes, the Pyxis luminaire can be cut and connected to each LED individually, allowing it to be adjusted to the length required for the project.
Requires pre-machining to embed it into the surface of the furniture, ensuring aesthetic and functional integration.
No, the LED converter is not included in the scope of delivery, but is necessary for operation (24V DC).
The luminaire includes 1 LED luminaire, 4 mounting clips, a 1.5 m cable with Miniled connection and a cover cap.
The Miniled connection cable has a length of 1.5 metres, ideal for easy installation.
The kit includes a cable with side cover, a 1.5 metre Miniled connector, a single cover cap and 3 mounting clips.
Yes, this kit is designed to be compatible with the Pyxis luminaire by cutting and adjusting its length according to the needs of the project.
The side cover with Miniled connector allows a quick and safe connection to the 24V DC converter, facilitating the mounting and integration of the luminaire.
Yes, the kit includes mounting clips and all necessary accessories to complete the installation.
The accessories are made of durable plastic, available in black or grey finishes to match the design of the space.
The SMART 6W LED Converter is designed for energy efficiency and high power factor. It operates with an input of 220-240V AC (50-60Hz) and generates an output of 12V DC, ideal for LED luminaires. In addition, it has a compact design with a reduced thickness of only 16.5mm.
This converter includes protection against overloads, short circuits and electromagnetic interference, ensuring stable, safe and compliant operation in accordance with European standards.
It has 6 Miniled outlets compatible with IEC 60320 C7 connection, allowing efficient and safe connection for multiple luminaires.
Yes, thanks to its compact and slim design, it is ideal for installation in back or hard-to-reach areas, such as under furniture or in concealed spaces.
Yes, this converter complies with European safety standards, ensuring protection against electrical interference and offering reliable operation for domestic or professional use.
The 15W SMART LED Converter has an input of 220-240V AC (50-60Hz) and output of 24V DC, which makes it ideal for LED luminaires with lower power requirements. In addition, its compact design with 16.5mm thickness sets it apart as it is suitable for narrow installation areas.
It has 6 Miniled outlets, designed to facilitate the efficient connection of multiple LED luminaires. Each output uses IEC 60320 C7 connectors, allowing a stable and secure connection.
Its Plug&Play design and its compatibility with centralised SMART sensors allow multiple luminaires to be easily connected and controlled. It is also ideal for both domestic and professional applications, adapting to different lighting configurations.
It integrates protection against overloads, overheating and short circuits in the secondary, complying with European safety standards to guarantee stable and safe operation in all its applications.
The power cable has a length of 2 metres, is equipped with a 90° angled Type C plug and an IEC 60320 C7 connector. This configuration optimises space and facilitates installation, even in hard-to-reach areas.
The RF Emitter works as a wireless switch, sending a radio frequency signal to the Smart RF receiver (not included). It allows the luminaire to be switched on, off or dimmed by a sensor that detects the movement of the hand, without direct contact.
The sensor has a detection range of 3 cm, allowing the luminaire to be controlled without touching the device, offering convenience and practicality in use.
Yes, it is possible to pair up to 6 receivers with one RF emitter or link up to 6 emitters to the same receiver. This makes it possible to manage several luminaires from a single emitter or different emitters depending on the needs of the space.
The RF Emitter uses a CR2450 battery, which provides a battery life of approximately 550 on/off cycles or up to 14 months in standby mode.
Installation is simple and can be done using double-sided adhesive or screws, both of which are included in the package. This makes it easy to attach to furniture, walls or other surfaces.
The RF emitter with Smart motion sensor detects the presence of a human body within its detection range. When activated, it switches the luminaire on and automatically switches it off after 30 seconds if no further motion is detected.
The sensor has a detection range of 90° and a length of 2.5 metres, allowing it to detect movement over a wide area. It keeps the luminaire active as long as it detects presence in its range.
It is possible to pair a transmitter with up to 6 receivers, and a receiver can be connected to up to 6 transmitters. This makes it possible to manage several luminaires in a flexible and practical way.
It is powered by a CR2450 battery, which provides up to 600 on/off cycles or 16 months standby time. The battery can be easily replaced when needed.
It is installed with double-sided adhesive or screws, both included. It is ideal for spaces such as corridors, staircases, dressing rooms and wardrobes, where automatic switching is particularly useful and efficient.
The sensor detects when a door is opened or closed within a range of 6 cm, automatically switching the luminaire on or off. It works wirelessly by sending radio frequency signals to the Smart RF receiver.
The detection range is 6 cm, allowing installation on furniture with single or double doors. The sensor lens is positioned so that each side detects the movement of a specific door.
Up to 6 receivers can be linked with one emitter and 6 emitters with one receiver, providing flexibility to manage multiple luminaires.
It uses a CR2450 battery, which lasts approximately 12 months in standby mode or 500 on/off cycles. The battery is easily replaceable.
It is installed with double-sided adhesive or screws, both included in the kit. Installation is simple and suitable for everyday cabinets or similar spaces.
Yes, the Auriga Switch luminaire has a proximity sensor that acts as a switch, with the added bonus that it can connect up three other luminaires to be controlled by the same sensor.A total of 4 Auriga luminaires can be installed (1 Auriga Switch luminaire and 3 Auriga luminaires without a sensor).To this end, it features an input and an output cable, as well as an AMP connector. Moreover, it includes a soft light start and end function that creates an attractive, innovative effect.
The RF receiver receives radio frequency signals emitted by the RF Smart emitters, controlling 12V DC or 24V DC LED luminaires. It has a maximum range of 5 metres.
It is possible to link 1 transmitter with up to 6 receivers and 1 receiver with up to 6 transmitters, providing flexibility in multiple installations.
To pair, simply press the pairing button on the receiver and then on the transmitter for 10 seconds. The same process is used to unpair.
It can be installed concealed in different environments such as dressing rooms, kitchens, bedrooms or living rooms. It is versatile and discreet, suitable for various types of projects.
The kit includes 1 receiver and a double-sided adhesive for quick and secure installation.
The sensor detects motion within a range of 90° and up to 2.5 metres. The timer switches the luminaires off after 60 seconds without motion detection and restarts when motion is detected again.
This sensor can be connected to a Smart converter to manage several luminaires simultaneously with a single sensor. It is compatible with 12V DC or 24V DC luminaires, supporting a maximum power of 36W for 12V DC and 72W for 24V DC.
The sensor requires machining with a diameter of 12 mm to be integrated into the furniture. It is fixed by means of a mounting accessory and screws included.
It includes a 1.5 m cable with Miniled connection and an additional 1 m for the lens. This facilitates integration into Miniled systems for quick and easy installation.
Ideal for passageways, dressing rooms, wardrobes, hallways and stairwells in homes or commercial facilities, providing comfort and energy efficiency through automatic switching on and off.
The Mizar LED light features an integrated converter that connects to alternating current, so no additional converter is required.
The sensor has a detection range of 10 cm and is activated when the furniture doors are opened or closed. It is ideal for furniture with double doors, as it is installed in the centre and controls the lighting regardless of which of the doors is opened or closed.
It is compatible with 12V DC or 24V DC converters, supporting power ratings of 36W at 12V DC and 72W at 24V DC. It integrates with LED luminaires from Miniled systems.
No machining required. Can be mounted directly onto the surface of the furniture using the included double-sided adhesive accessory or screwed for a more permanent fixing.
It can be connected to a converter to manage up to 6 secondary luminaires with Miniled connection from a single sensor.
This sensor is ideal for wardrobes, dressing rooms and other furniture that require automatic switching on and off when opening or closing their doors, offering convenience and energy efficiency.
The sensor is activated by passing your hand in front of it, within a detection range of 6 cm. It allows the luminaire to be switched on and off, as well as adjusting the light intensity (dimmer mode) by a prolonged action.
This sensor supports up to 36W in 12V DC systems and 72W in 24V DC systems, making it ideal for a wide variety of applications with LED luminaires.
Yes, it is possible. Connected to a Smart converter, it can manage up to 6 secondary luminaires with Miniled connection, allowing all of them to be switched on and off at the same time.
No complex machining is required. Its compact design allows it to be recessed in the furniture, occupying a diameter of only 8 mm.
It is ideal for furniture in kitchens, wardrobes, dressing rooms and areas where simple LED lighting control with intensity adjustment is desired, offering convenience and energy efficiency.
Its installation is easy and simple, as it does not require a converter. In order to mount the lights on a piece of furniture, all you have to do is machine the piece in order to embed the lights or screw the lamp onto the surface of the furniture using its bracket.
The app allows you to switch on, switch off, adjust the intensity (dimmer) and create customised scenes for different times of the day or home environments. In addition, voice commands can be sent.
This receiver can control up to 5 LED luminaires connected via the Miniled connectors, ensuring simultaneous control.
Yes, the receiver is compatible with Google Assistant and Alexa, allowing full control of the lights via voice commands.
It can be paired with up to 6 RF transmitters. The process is simple: press the pairing button on the receiver and the transmitter for 10 seconds. To unpair, repeat the procedure.
It is easily installed on the converter output with Miniled connections. Its compact design allows for concealed location with a maximum range of 5 metres from the RF transmitter.
Combines the functionality of a hand switch and a proximity sensor for doors. This allows luminaires to be controlled by waving a hand in front of the sensor or by opening/closing a door, depending on the required configuration.
It has a detection range of 10 cm. It is triggered automatically when it detects the user's hand or when it interferes with the sensor field when a door is opened or closed.
Yes, the sensor can be connected to a Smart converter to control the simultaneous switching on and off of all connected luminaires. In this type of installation, the sensor manages a maximum power limit of 36W at 12V DC and 72W at 24V DC.
It can manage up to 6 ports or secondary outputs via Miniled connections, allowing independent on/off switching of several luminaires with a single converter.
The sensor can be surface mounted using a double-sided adhesive accessory or recessed into furniture thanks to its compact design. It includes a 1.5 m cable with Miniled connections and components for easy installation.
The Lich LED light requires a constant voltage LED converter (12V DC) for operation.It has an integrated sensor that keeps the llights on as long as it detects movement and turns it off after 60 seconds if no movement is detected. Moreover, it features a two-metre long, 120º angle detection range.
The Taurus LED spotlight offers a cool white light of 6,000K (also available in 5,700K) and has an opal diffuser that homogenises the light to avoid reflections and shadows.
No, this spotlight does not require a transformer, as it operates directly on 230V AC.
It can be easily installed on glass mirrors, on table tops or on the surface of furniture using the included screws and instructions.
The spotlight has an IP44 protection rating, making it ideal for wet areas and splash resistant.
Includes LED luminaire, screws and instructions for easy and safe mounting.
It is compatible with Lynx 8mm wide LED strips and accessories such as Lynx Q and Z sensors and cables.
Requires machining in the cabinet with a width of 14 mm and a depth of 11 mm.
The side covers are made of white plastic, and the diffuser profile of white polycarbonate which homogenises the light. The recessed profile is made of painted or anodised aluminium, depending on the model.
No, the LED strip is not included in the set.
The bars are supplied in a length of 2.35 m, in a cardboard tube together with the side covers.
Its installation is easy and simple, as it is mounted onto the surface of the furniture. You can install it using screws, which will be hidden under the cover cap, or double-sided adhesive tape. Both options are included in the scope of supply of the lights.
Yes, the aluminium profile as well as the diffuser profile and side covers can be cut to the desired length using suitable tools, such as a hand saw or an aluminium cutter. This allows the system to be adapted to any length required for the installation.
It does not affect the intensity significantly, but it does improve light distribution by avoiding bright spots, providing a more uniform and pleasant illumination.
To install the profile, a screwdriver is required to fix the included screws, as well as a saw to cut the profile to size if necessary. A suitable drill bit is also recommended in case it is necessary to drill holes for cable routing.
Yes, the profile design includes enough space to accommodate the connection cables to keep the installation tidy and unobtrusive, ideal for furniture and visible surfaces.
Yes, the profile is made of aluminium and plastic, which makes it resistant to high humidity environments. However, it is recommended to use LED strips with adequate protection (such as IP65 or higher) to ensure the durability of the system in wet areas.
This will depend on the power consumption of each connected LED luminaire, but in total should not exceed a maximum power of 200W.
Yes, this transformer is designed with an overheating, overload and short-circuit protection system to ensure safe operation.
The distributor has 6 outputs for quick and easy connection of LED luminaires via MINILED connectors.
Yes, the transformer is equipped with an interchangeable cable that allows you to connect a different type of cable depending on the plug required in the target market.
No, this transformer is designed for indoor use or dry areas (IP20). For wet areas, a transformer with a higher protection rating is required.
The following video shows how you can easily install the aforementioned LED lighting.
The sensor has a detection range of 1.5 metres in length with a coverage angle of 90°.
No, the timer automatically switches off the luminaire 45 seconds after no motion is detected and is not adjustable.
The sensor can be installed in Ø16 mm machining or screwed directly to the surface of the furniture using the included screws and accessories.
Yes, the sensor is compatible and works correctly with 12V DC and 24V DC LED converters, supporting up to a maximum power of 250W.
Yes, the sensor employs PIR technology, which provides high sensitivity and accuracy in detecting movement of a human body.
The UK cable is designed with a UK Type G plug, ideal for the UK market.
The cable length is 2 metres, offering flexibility in installation.
Yes, the cable is compatible with all constant voltage converters available in the Emuca catalogue.
It has class II protection, which ensures resistance to overheating and short circuits.
The cable is made of plastic with a black finish, guaranteeing durability and resistance.
Yes, we recommend fully charging the battery of the Castor luminaire before installation.Although some batteries may be partially charged upon arrival, the charge will be minimal and simply for testing purposes. Therefore, a fully charged battery should be used for installation.
It is suitable for high demand lighting applications requiring up to 7A of current, such as in dressing rooms, kitchens and commercial or residential environments.
It offers a VH-2Y connection at the main end, designed to connect to the high power outputs of the Smart converters (60W, 80W, 90W and 100W).
The terminal block allows quick, manual connection without the need for additional connectors, optimising current flow and improving efficiency.
The cable supports a maximum current of 7A, ideal for 84W to 168W systems with voltages of 12V DC and 24V DC.
It is compatible with Smart converters and 12V DC and 24V DC LED luminaires, used in various spaces such as dressing rooms, living rooms and kitchens.
Suitable for surfaces such as wood (≤30 mm), plastic (≤22 mm), natural stone (≤20 mm) and glass (≤12 mm). Not compatible with metal surfaces or mirrors.
It has a detection field of 30 mm and is activated by touching the installed surface, generating a tactile contact that controls the illumination.
No, the sensor is not suitable for metal surfaces and mirrors due to interference with touch detection.
It is compatible with 12V and 24V DC LED luminaires and Smart converters, including up to 6 ports or secondary outputs with Miniled connection.
The dimmer function allows the light intensity to be adjusted by a long zoom, giving full control over the brightness.
The Castor battery-powered light has a range of 700 lighting cycles per charge before the batteries run out.
The sensor is activated by touch, switching the luminaire on or off. In addition, the light intensity can be adjusted with its dimmer function by maintaining contact with the sensor.
Yes, the sensor has two lenses that function as independent switches, allowing luminaires to be controlled from either lens indistinctly.
It is compatible with 12V or 24V DC LED luminaires and Smart converters. It also supports up to 6 secondary outputs with Miniled connection.
It is ideal for bed headboards or areas where convenient tactile control is required, such as built-in furniture or areas with direct access to the lens.
Includes a 1.5 m cable with Miniled connections and an additional 1 m cable for the lens. Installation is easy thanks to its compact dimensions and recessed design in 8 mm diameter furniture.
The SIMPLE model has a single touch lens for switching on/off and adjusting the intensity of the luminaire. The DOUBLE model includes two independent lenses for greater control.
The sensor has a diameter of 8 mm for embedding in furniture. A 1.5 m cable is included and requires a compact installation space.
Supports up to 36W for 12V DC luminaires and up to 72W for 24V DC luminaires, depending on the Smart converter used.
Yes, the sensor can be connected to a single Smart converter, allowing all luminaires connected to the converter to be controlled simultaneously.
The kit includes the sensor with a 1.5 m cable with Miniled connection and an additional 1 m for the lens, plus components required for quick and safe installation.
The battery of the Castor light is recharged with a mobile charger. The charger needs to have a type B micro USB connector and should at least supply 5V DC.This battery is located on the side support with a cover, which must be taken off in order to recharge it.Likewise, it has an LED indicator that goes from red to green when charging is complete after an approximate period of 4 hours.
The sensor allows the luminaire to be switched on, off and dimmed by means of two independent lenses. It also has a dimmer function for precise brightness adjustment.
The DOUBLE model includes two lenses that operate independently, allowing different luminaires or zones to be controlled from each lens. The SIMPLE model has only one lens for similar functions.
Supports up to 36W for 12V DC luminaires and up to 72W for 24V DC luminaires, always connected to a compatible Smart converter.
The sensor must be recessed in a piece of furniture with a diameter of 8 mm. It is connected to the Smart converter via Miniled cables and has a compact and simple mounting.
The kit includes the sensor with two 1.5 m cables and an additional 1 m for each lens, Miniled connections and all necessary components for installation.
The Plugy USB connector is designed to be recessed into furniture, offering a discreet and functional solution for charging electronic devices such as smartphones and tablets.
It has two USB Type A ports with a combined output of up to 3.40A or 1.70A per port, with a total power of 30W.
For installation, a 25 mm diameter cut-out is required in the cabinet and a 12V DC and 30W constant voltage converter is required for operation.
It is ideal for charging a wide variety of electronic devices such as mobile phones, tablets and other USB-powered equipment.
The kit includes a USB connector with two type A ports, fixing screws and everything you need for easy installation.
The battery has an LED indicator that goes from red to green when charging is complete after an approximate period of 4 hours.
To install the Spot LED spotlight it is necessary to drill an 8 mm diameter hole in the furniture.
This LED spotlight has a power of 0.3W and emits cool white light with a temperature of 6,000K, ideal for highlighting indoor or outdoor areas of furniture.
Yes, this spotlight requires a constant voltage LED converter for proper operation.
It is suitable for both indoor and outdoor furniture, integrating perfectly into modern furniture designs thanks to its chrome finish.
The package includes 1 small LED luminaire and a 0.5 m long cable for easy installation.
The Lynx Z LED L-junction is compatible with 8mm wide SMD, COB and SOB LED strips in both 12V DC and 24V DC.
This accessory allows LED strips to be connected at a 90° angle, offering solutions for corners or specific designs.
It supports up to 5A of current throughput, reaching power ratings of 60W in 12V DC systems and 120W in 24V DC systems.
It is made of transparent plastic, which avoids the generation of dark areas and improves the aesthetics of the assembly. In addition, it includes a metal lock that secures the connection and withstands high tensile forces without disconnecting.
The package contains 1 L-joint specifically designed for easy corner connections of LED lighting systems.
The following video shows how you can easily install the aforementioned LED lighting.
This fixture is compatible with 8mm wide SMD, COB and SOB LED strips, operating on 12V DC and 24V DC systems.
It allows different shapes with bending angles from 0° to 180°, facilitating its use in complex installations or corners.
The cable supports a current throughput of up to 5A, reaching power ratings of 60W at 12V DC and 120W at 24V DC.
It stands out for its metal lock, which secures the connection to prevent disconnection, and its transparent plastic construction, which eliminates areas of darkness. In addition, it has a 50 mm long cable with differentiated colours to identify polarities.
The package includes 1 x 50mm flexible Lynx Z LED cable, ready to be used for LED strip installation.
The I-connector is specifically designed to join 24V DC Pyxis LED luminaires, facilitating installation in linear configurations.
It allows the creation of longer luminaires by making use of surplus lengths of up to 5 metres.
Its self-sealing design and metal connectors ensure a solid and stable connection, preventing slippage within the profile and guaranteeing the passage of current from one luminaire to another.
It is made of transparent plastic and metal connectors. The transparent plastic maximises the luminous flux at the junction, while the metal connectors ensure efficient current transmission.
No, its transparent plastic construction means that the passage of light at the joints is not affected, guaranteeing uniform illumination.
Yes, the Crater light can be recharged with a mobile phone charger. The charger needs to have a type B micro USB connector and should at least supply 5V DC.The charging time will vary in accordance with the amperage of the charger, although it is recommended to use 5VDC 1A chargers, therefore the estimated charge time is 2 to 2.5 hours.
The L connector is ideal for applications that require creating 90° angled junctions with the Pyxis 24V DC LED luminaire, perfect for perimeter lighting or corner designs.
It is necessary to cut the profiles at 45° mitres to ensure a perfect fit at 90° joints.
Allows luminaires up to 5 metres in length to be connected, optimising installation in angled designs.
It is made of transparent plastic with metal connectors. The transparent plastic optimises the passage of light, while the metal connectors ensure efficient current transmission.
No, the transparent design of the connector allows a uniform luminous flux to be maintained at the corner joints, maximising aesthetics and functionality.
The sensor has a detection range of 6 cm, which allows it to be activated precisely when a hand is swiped or a door is opened, depending on the configuration.
Yes, the sensor is fully compatible with 12V DC and 24V DC LED systems, supporting maximum power ratings of 36W at 12V DC and 72W at 24V DC.
The sensor has a small sensor head (8 mm diameter) that can be easily embedded in the furniture by drilling a hole. It also includes all the necessary accessories for fixing.
Yes, it can be connected to a Smart converter with control port, allowing simultaneous switching on and off of all connected luminaires. In addition, it supports connection to the 6 Miniled ports of the converter for independent control of the luminaires.
The sensor is made of plastic with a black finish, providing durability and resistance. It also features low power consumption and protection against electrical and electromagnetic interference.
Yes, the Kuma light requires a more powerful converter as it has USB ports for recharging smartphones and tablets. If you wish to use those USB ports in order to recharge devices, the light's consumption will be greater.It is thus recommended to use at least a 30W converter, code. 7001320 for the use of a single light and a 50W converter code. 5008420 for the use of 2 lights.
The sensor has a detection range of 6 cm, designed to be activated when the cabinet door is opened or closed.
Yes, the sensor is ideal for wardrobes with double hinged doors, as it can be installed in a single opening. It detects movement of either door, switching the luminaire on or off independently.
The sensor supports up to 36W with 12V DC LED systems and up to 72W with 24V DC systems.
The sensor has compact heads with a diameter of 8 mm which are recessed into the cabinet by drilling holes. It includes a 1.5 m cable with Miniled connections and an additional 1 m for easy installation.
Yes, the sensor is connected to a Smart converter with control port, allowing simultaneous switching on and off of all connected luminaires.
The touch sensor acts as a switch that turns the luminaire on or off when touched by hand. In addition, it has a dimmer function that allows the intensity of the light to be adjusted by a short or long zoom.
The RF transmitter has a range of up to 5 metres, allowing it to be installed in hidden or hard-to-reach locations.
Up to 6 RF receivers can be linked per transmitter, facilitating the control of multiple luminaires simultaneously.
The transmitter uses a CR2450 battery which has a battery life of approximately 700 power-on cycles and up to 18 months in standby mode. It is recommended to replace the battery when it runs out of power.
Yes, the emitter is compatible with Smart converters and 12V DC or 24V DC LED luminaires, and is ideal for applications in kitchens, wardrobes or bedrooms.
The following video shows how you can easily install the aforementioned LED lighting.
Cygnus lighting is available in two different lengths of 195 mm and 395 mm, both in cool white or warm white colour temperatures. Cutting or tampering may result in the lighting not working.
Persei lighting is available in two different lengths of 395 mm and 595 mm, both in cool white or warm white colour temperatures. Cutting or tampering may result in the lighting not working.
Yes, as the Volans light functions at 230V AC therefore it does not need any extra converter.
Yes, it is possible to recharge the Kraz light with a mobile phone charger. The charger needs to have a type B micro USB and should at least supply 5V DC.
The charging time will vary depending on the amperage of the charger. It is recommended to use 5V DC 1A chargers, therefore the estimated charge time is 2 to 2.5 hrs.
The handle is made of aluminium with anodised or painted finishes, which guarantees high resistance to corrosion, durability and an aesthetic design adapted to different styles of furniture.
Yes, the Sharp 18 handle is compatible with sliding door systems such as Placard 74, and is specifically designed for installation on 18 mm thick boards.
The handle is available in 2.5 m and 2.9 m lengths, allowing it to be cut and adjusted to fit different cabinet configurations.
The sliding door system combined with the Sharp 18 handle supports a maximum weight of 70 kg per door, providing stability and security in daily use.
The RAL of the white gloss finish on the rails and handles of the Placard sliding door system is approximately 9003. The RAL of the anthracite grey finish is approximately 7043. The RAL of the black finish is approximately 9011.
This light has a range of 360 switching cycles per charge before the battery runs out and it has an LED indicator that goes from red to green when the charge is complete following an approximate time of 2.5 hours.
The Wave 16 handle is specifically designed for 16 mm thick boards. It is essential that the board is straight, without irregularities, and compatible with the profiles used in Placard 74 systems.
This handle is available in 2.35 m and 2.7 m lengths, in white painted, black painted and matt anodised finishes. These options offer flexibility to suit different furniture styles and designs.
The handle design includes an ergonomic grip function that makes it easy to open and close the doors. In addition, the robust construction enhances the durability of the system, especially in frequently used applications.
In Placard 74 systems, the Wave 16 handle does not require additional reinforcement if installed correctly on 16 mm boards. However, it must be ensured that the top and bottom profiles and carriages are correctly fixed to guarantee the stability of the system.
The RAL of the white gloss finish on the rails and handles of the Placard sliding door system is approximately 9003. The RAL of the anthracite grey finish is approximately 7043. The RAL of the black finish is approximately 9011.
This crossbar is compatible with board thicknesses between 18 mm and 22 mm, offering versatility for different sliding door designs. It can also be installed on 12 mm faces if a minimalist design is desired.
The asymmetrical design facilitates installation in thinner boards (12 mm) for a minimalist design. It also offers greater structural stability for boards up to 22 mm, providing rigidity and aesthetics in one product.
It is available in lengths of 2.35 m and comes in white painted, black painted and matt anodised finishes. Its asymmetrical design allows it to adapt to both modern styles and projects with more robust lines.
The HK18x12/22 Placard crossbar, in combination with the appropriate guide systems, is designed to securely support standard sliding doors, depending on the complementary hardware. For specific loads, it is recommended to consult the technical specifications of the complete system.
To maintain the painted or anodised finish, clean the header with a soft cloth and non-abrasive detergents. Avoid harsh chemicals and be sure to remove dirt in the areas of contact with the guides to ensure smooth sliding of the doors.
This track is compatible with door thicknesses of 10 mm, 16 mm, 18 mm and 19 mm, guaranteeing precise sliding and a perfect fit in Placard sliding systems.
It is available in lengths of 2.35 m and 3.9 m, with finishes such as white painted, black painted, anthracite grey, matt anodised and gold anodised, adapting to different design styles and functional needs.
Installation is carried out by fixing the rail to the base of the enclosure, ensuring adequate levelling to avoid unevenness that could affect sliding. It is compatible with the cover profile and the guide system for a complete assembly.
The system can support a maximum weight of 70 kg per door, provided that compatible Placard system hardware and profiles are used.
It is recommended to clean the track regularly with a soft cloth to remove dust and debris that may interfere with the movement of the doors. Avoid abrasive products that may damage the aluminium finish.
This crossbar is compatible with board thicknesses from 12 mm to 22 mm. Its dimensions are 19.4 mm wide and 12 mm high, making it ideal for cabinets with different sliding door configurations.
The installation is done by fixing it to the edge of the panel using standard tools. The design of the crossbar protects the door edges and improves the structural rigidity of the system.
It is available in white painted, black painted, anthracite grey and matt anodised finishes. These finishes not only offer corrosion resistance, but also allow the crossbar to be combined with different styles of furniture.
The transom does not directly support the weight of the doors, but contributes significantly to the structural rigidity of the sliding door system, protecting the edges of the panel and improving its durability in combination with the profiles and hardware of the Placard system.
Aluminium provides high resistance to wear and corrosion, ensuring the durability of the product even in heavy-duty environments. In addition, it is a lightweight material that facilitates assembly.
This handle is designed for 19 mm thick boards, ensuring a perfect fit and optimal sliding on Placard 74 sliding door systems.
The handle has a length of 2.25 m or 2.7 m, and is available in white painted, black painted and matt anodised finishes, offering options to match different styles of furniture.
Installation requires machining the edge of the board to fit the handle. It is fixed with screws suitable for the material, ensuring a firm and stable installation.
The design incorporates an ergonomic grip zone that makes it easier to open and close the doors. It also enhances the user experience by ensuring comfort and functionality.
The RAL of the white gloss finish on the rails and handles of the Placard sliding door system is approximately 9003. The RAL of the anthracite grey finish is approximately 7043. The RAL of the black finish is approximately 9011.
The Wave 16 handle is specifically designed for 16 mm thick panels, guaranteeing a perfect fit and stable installation on sliding doors.
It is available in lengths of 2.25 m and 2.7 m, with finishes such as white painted, black painted and matt anodised, allowing it to be combined with different styles of cabinets.
Installation requires machining the edge of the panel and fixing the handle using standard tools. The design allows for secure mounting and makes it easy to open and close the doors.
The RAL of the white gloss finish on the rails and handles of the Placard sliding door system is approximately 9003. The RAL of the anthracite grey finish is approximately 7043. The RAL of the black finish is approximately 9011.
The Wave 16 and Wave 16 E handle profiles for sliding doors have the same design and the same geometry for 16 mm thick boards. The difference is that the Wave 16 E handle profile is thinner and therefore more economical.
This kit is compatible with boards having a thickness of 10 to 16 mm, ensuring a correct fit and optimal sliding.
The trolleys are fitted with ball bearings that ensure smooth and quiet movement and high durability even under heavy use.
The following video shows how the sliding wardrobe door system is assembled.
The following video shows how the sliding wardrobe door system is assembled.
Yes, it is possible to put a brake on the central door of a 3-door Placard wardrobe. However, the opening of the central door must be taken into account when applying the brake, as it can only have a brake in one direction, but the door can be opened in both directions. The following sketch shows the position of the brakes on the track according to the opening direction of the sliding doors.
Our LED converters do not have the necessary characteristics to work together with dimmers in the primary voltage (110 ~ 240V AC, 50 ~ 60Hz).However, we do have devices that can regulate the intensity (dimmer) in the secondary voltage (12V-24V DC). These can be:- Lynx switch/dimmer (cod. 5203620). - Spirit switch/dimmer (cod. 5022617). - Micron switch/dimmer (cod. 5053125). - Dot switch/dimmer (cod. 50228).
The following video shows how you can easily install the aforementioned LED lighting.
Installation of the system requires fixing the top rail and bottom rail (aluminium) directly to the enclosure structure. The rails must be cut to the specific enclosure size using suitable tools. The system includes 4 clips which are used to correctly position the profiles and ensure safe and stable mounting.
The rails are available in 2.35 m, 3 m and 3.9 m lengths. Finishes include white painted, black painted, matt anodised and natural anodised to suit different styles and design requirements.
Easy mounting system with clips to simplify installation.
Aluminium material that provides high resistance to corrosion.
Versatility in finishes and sizes to suit different design styles.
Compatibility with bottom reduction systems, ideal for modern enclosures.
The RAL of the white gloss finish on the rails and handles of the Placard sliding door system is approximately 9003. The RAL of the anthracite grey finish is approximately 7043. The RAL of the black finish is approximately 9011.
The system is made entirely of aluminium, a lightweight, corrosion-resistant and durable material. This ensures smooth operation of the sliding doors and minimal maintenance, even in environments with high humidity or temperature changes.
The rails are made of matt anodised aluminium, which guarantees durability and corrosion resistance.
The set includes a 3.9 m top rail, a 3.9 m bottom rail and a 3.9 m cover profile.
Yes, this system is compatible with sliding doors from the Placard B8 range and other similar systems, provided that the dimensions are compatible.
No, Placard rails can be installed using standard tools, without the need for specialised equipment.
The cover profile is used to cover and protect the visible edges of the rails, providing a clean and professional finish.
The following video shows how you can easily install the aforementioned LED lighting.
The RAL of the white gloss finish on the rails and handles of the Placard sliding door system is approximately 9003. The RAL of the anthracite grey finish is approximately 7043. The RAL of the black finish is approximately 9011.
The Wave 19 handle is specifically designed for cabinets with aluminium sliding doors and a panel thickness of 19 mm.
It is made of high quality aluminium with a white painted finish, giving it durability and an elegant design.
The handle is fixed directly to the aluminium profile of the Placard 74 system, ensuring a stable and secure installation.
Yes, it includes all the necessary components for installation, such as the profile and the tools required for proper assembly.
The following video shows how the sliding wardrobe door system is assembled.
The following video shows how the sliding wardrobe door system is assembled.
Yes, it is possible to put a brake on the central door of a 3-door Placard wardrobe. However, the opening of the central door must be taken into account when applying the brake, as it can only have a brake in one direction, but the door can be opened in both directions. The following sketch shows the position of the brakes on the track according to the opening direction of the sliding doors:
The Placard 90 wheel 50 hardware kit has a maximum load capacity of 70 kg per door, ensuring safe use even on larger doors.
Installation is carried out by attaching the upper and lower carriages to the cabinet doors, while the brakes are fitted to ensure smooth closing. All parts are easily attached using the included screws.
The following video shows how you can easily install the aforementioned LED lighting.
The main function of the Placard UB14x4 crossbar is to provide greater stability to sliding doors, avoiding oscillations during opening and closing.
The crossbar is made of aluminium, a strong and lightweight material that does not add extra weight to the cabinet structure.
The crossbar has a length of 2.35 m and 2.9 m, which makes it suitable for standard sized cabinets in Placard systems.
Yes, the aluminium used is treated to provide corrosion and wear resistance, prolonging its service life.
Installation is carried out by fixing the crossbar to the structure of the Placard sliding door system. It is recommended to follow the manufacturer's instructions to ensure correct installation.
The RAL of the white gloss finish on the rails and handles of the Placard sliding door system is approximately 9003. The RAL of the anthracite grey finish is approximately 7043. The RAL of the black finish is approximately 9011.
The Sharp 16 handle has an ergonomic grip function and provides robustness and strength when opening and closing sliding doors in Placard systems.
It is made of high quality aluminium with a painted finish available in colours such as white, black, matt and gold, ensuring corrosion resistance and a modern aesthetic design.
The handle has a length of 2.7 m and 2.35 m, which makes it suitable for large cabinets, and can be cut to size according to customer requirements.
Yes, it is compatible with the Placard 74 sliding door system and other similar systems that require a robust and functional handle design.
The RAL of the white gloss finish on the rails and handles of the Placard sliding door system is approximately 9003. The RAL of the anthracite grey finish is approximately 7043. The RAL of the black finish is approximately 9011.
The Style 16 handle is designed to provide a robust and ergonomic grip when opening and closing sliding doors, ensuring strength and durability.
It is made of aluminium and is available in white painted and matt anodised finishes, offering modern design and corrosion resistance.
The handle has a standard length of 2.7 metres, allowing it to be adapted to doors of different dimensions by cutting to size according to the customer's needs.
Yes, the Style 16 handle is compatible with Placard sliding door systems, especially the Placard 74 system, and other similar systems.
The following video shows how you can easily install the aforementioned LED lighting.
The following video shows how you can easily install the aforementioned LED lighting.
The RAL of the white gloss finish on the rails and handles of the Placard sliding door system is approximately 9003. The RAL of the anthracite grey finish is approximately 7043. The RAL of the black finish is approximately 9011.
The Canal Placard 74 top track is a component designed to guide sliding doors in a bottom-running wardrobe system. It provides additional support for smooth and safe door movement.
The rail has a length of 2.5 m and 3.9 m, adapting to different installation dimensions.
Installation is carried out by fixing the rail to the top of the enclosure using screws. It is important to follow the included instructions to ensure proper and durable installation.
It is made of high quality aluminium with a matt anodised finish, which ensures high corrosion resistance, elegant design and a long service life.
The RAL of the white gloss finish on the rails and handles of the Placard sliding door system is approximately 9003. The RAL of the anthracite grey finish is approximately 7043. The RAL of the black finish is approximately 9011.
The kit includes 2 x 16 U-profiles for the top and bottom of the door, 1 x 16x4 U-profile, and 1 dust cover, all 2.35 m long. The boards are not included.
It is designed for 16 mm and 19 mm thick boards, providing a precise and secure fit.
Installation is very simple: the handles are fixed by inserting them into the sides of the table top, without the need for special tools.
The profiles are made of aluminium with an elegant matt anodised finish, offering strength and a modern look.
The main difference is the position they are fitted in during installation.The 12V sensors (Twelfy) are placed between the light and the converter. Consequently, the converter is always working.The 240V sensors (Red eye) are placed between the converter and the electric socket.The big advantage of a 12 V sensor (Twelfy) is that is makes it possible to connect with a single converter (maximum admissible power 40W), on the other hand the 240V sensors (Red eye) need two converters.
The Red Eye sensors that functions at 240V AC are different in accordance with their functionality and your needs."I need a sensor that turns on and off the light like a switch but without physically touching the furniture".
SWITCH. Red Eye 1 (switch) Code. 7001520. An ON/OFF proximity detection system that turns on or off when its detection range of 5 cm is triggered."I need a sensor that turns on lights when it detects the movement of a human body and turns off automatically after a while, providing that it does not detect the movement of a human body, ideal for walk-in wardrobes".
MOTION. Red Eye 4 (movement) Code. 7001820. A movement detection system, it turns on when the detection range of 2.5 m IS triggered and the switching off can be adjusted between 10 seconds and 3 minutes."I need a sensor that turns on the light through contact with a metallic surface, ideal for bed headboards".
METAL. Red Eye 5 (touch) Code. 7001920. Detection system through contact with a metal surface. Adjustable detection ranges and/or functioning according to needs.
Yes, its design allows for easy installation using basic tools such as a cut-to-length saw, a drill and a screwdriver.
No, the handle does not include screws. It is recommended to use screws suitable for the thickness of the board (18 mm) and the material of the cabinet for a secure fixing.
The handle does not require special maintenance. It is recommended to clean it periodically with a damp cloth and avoid using abrasive products that may damage the anodised finish.
Yes, although it is specifically designed for the Placard 61 system, it can be adapted to other systems as long as the board dimensions and profiles are compatible.
The handle has a length of 2.8 m. It can be cut to the required length using tools such as a saw to adapt it to the specific cabinet design.
Compatible thicknesses are 16, 18 and 19 mm, ensuring a perfect fit between profiles, rails and boards.
The anti-derailment system consists of an integrated spring in the bottom carriage and an adjustable anti-jump stop in the top runner. It is installed at both ends of the system to ensure that the doors do not slip out of the track during use.
The adjustment system allows the height to be adjusted by up to ±5 mm to level the doors after installation. This is done by adjusting the screws located on the lower carriages.
The soft closing device includes a hydraulic piston and a progressive braking system. It is designed to withstand up to 30 kg per door and ensures safe and quiet closing.
Yes, both profiles and rails are supplied in 2.35 m dimensions and can be cut to size according to the dimensions of the furniture using suitable cutting tools.
The kit includes:
1 set of soft closing devices
Installation accessories
It is designed for sliding doors up to 30 kg, providing a controlled and quiet closing.
The system is compatible with wooden or glass sliding doors, provided they have a maximum weight of 30 kg and are designed for guide systems compatible with the Flow kit.
The kit is made of steel and high-strength plastic, guaranteeing durability and optimum performance over time.
The following video shows how the sliding wardrobe door system is assembled.
No, the mechanism is pre-configured to provide a soft and cushioned closing action, specifically designed for doors weighing up to 30 kg.
The product includes:
1 rail for top or bottom mounting.
It is specifically designed for the Flow sliding door system.
The rail is made of high-strength aluminium and is available in two finishes:
Matt anodised.
Black anodised.
Both finishes offer durability, corrosion resistance and a modern aesthetic design.
Yes, the track is versatile and can be installed on either the top or the bottom of the door, allowing a recessed mounting that optimises space and improves the aesthetics of the furniture.
No, this rail is designed exclusively for use with the Flow soft closing system, ensuring a perfect fit and a smooth glide.
The rail has a standard length of 2.35m. It can be easily cut to length using basic cutting tools to suit different installation configurations.
Kit includes:
1 set of sliding carriages.
Skids to ensure smooth and stable movement.
Mounting screws.
It is designed for easy installation on Flow sliding door systems.
This system is designed to support doors weighing up to 50 kg, providing a controlled and quiet sliding action.
No, this kit is exclusively compatible with the Flow system, ensuring a perfect fit and optimal performance.
The trolleys are equipped with high quality bearings for smooth running. In addition, they include an adjustment system with locks to fix the position and ensure stability.
No, the kit includes all necessary screws and can be easily installed with standard hand tools such as a screwdriver.
The following video shows how you can easily install the aforementioned the Atom 14 multiconnector.
The kit is designed to install wooden sliding doors with top runners, suitable for cabinets with 16 mm thick boards. It does not require pre-machining and is easily fixed using clips included in the kit. The top and bottom runners have a length of 2.35 metres, allowing them to be used in large wardrobes.
The system is designed to support doors weighing up to 30 kg each, ensuring smooth and safe operation. This makes it ideal for heavy duty enclosures in domestic or commercial environments.
The system includes a soft-close mechanism integrated into the carriages, which reduces the impact of closing the doors and improves the life of the slides. Matt anodised materials ensure corrosion resistance and a durable appearance.
The kit is designed for quick and easy installation without the need for specialised tools. Only a screwdriver is required to attach the clips and assemble the guides, making assembly easy for carpenters and distributors.
The Flow system includes components designed to ensure safe use, such as the carriages with cushioned locking and deformation-resistant slides. Although no specific certification is detailed in the data sheet, the materials and design meet the usual quality standards in the furniture industry.
The following video shows how you can easily install the aforementioned the Atom 26 multiconnector.
The following video shows how you can easily install the aforementioned the Vertikal multiconnector.
The USB connectors on the Vertikal multiconnector are solely for charging 5V DC - 2.10A (2x1.05A) electronic devices.
The vertical profiles act as a link between the upper and lower guide rails, ensuring the correct functioning of the folding and folding door system.
It is compatible with doors weighing up to 20 kg or 25 kg, depending on the model, and heights ranging from 1200 mm to 2700 mm, with board thicknesses between 18 mm and 26 mm.
Yes, the product includes two lengths of profiles that can be adapted according to the height of the door, allowing flexible configurations for different applications.
The Vertikal multiconnector can be opened upwards as well as downwards. It is designed to be built-into high units as well as low units thanks to its easily extractable retractile design and manual hiding.Its innovative design makes it possible to complete integrate into kitchen, office and home furniture, in low units with the opening upwards and in high modules with it downwards.
It is essential to combine it with the basic hardware set, the opening system (Push or Pull) and the rail set. Reinforcement and centring profiles are optional to increase stability.
It is made of matt anodised aluminium, which provides high durability, wear resistance and a modern finish that enhances the aesthetics of the furniture.
The following video shows how you can easily install the USB Plugy connector.
Kit includes: 2 side metal ribs and mounting hardware.
It is designed for easy integration with Simplex drawer systems.
The ribs are made of high-strength steel, available in white painted and anthracite grey finishes.
Both finishes guarantee durability, corrosion resistance and aesthetic design.
The system is designed for drawers with a height of 86 mm and multiple depths: 290 mm, 340 mm, 400 mm and 440 mm.
Compatible with full-extension slides and Simplex soft close systems.
Yes, installation is quick and easy. No special tools are required. Just assemble the ribs with the slides and fix them to the front of the drawer with the included screws.
The system supports up to 35 kg per drawer, ideal for residential and commercial applications.
The USB Plugy connector is designed to charge Tablets and Smartphones in a discreet and accessible way thanks to its complete integration into the furniture.
The bin has a capacity of 13 litres, making it suitable for domestic use and recycling in small spaces.
Yes, the cube is compatible with both left and right opening doors, adapting to different furniture configurations.
The cabinet must have a minimum internal width of 400 mm in order to install the recycling bin correctly.
Yes, the system is designed so that the bin lid opens automatically when the cabinet door is opened, making it easy to use.
The bucket is made of sturdy plastic with white, grey or stainless steel finishes, ensuring durability and modern aesthetics.
In order to charge two Smartphones, it is necessary to use the Plugy with the 15 W converted (code 7001420), while in order to charge two Tablets it is necessary to connect the 30 W converter (code 7001320).
In order to assemble a switch easily you need to adhere to the following diagram:
The following video shows how you can easily install the monochrome control with the LED light controller.
The following video shows how you can easily install the CCT control with the LED light controller.
The central vertical curved Gola profile is designed for installation in handle-free kitchen fronts, especially in tall units and pantry cabinets. It provides convenient access and modern aesthetics by eliminating visible handles.
The profile has a standard length of 2.35 metres, although it can be cut to any desired length to suit the needs of the furniture.
The profile is made of high quality aluminium with a white painted finish, which guarantees durability and resistance to wear and tear.
Yes, the Gola profile can be cut to size using suitable tools, allowing it to be adapted to different furniture projects.
The packaging includes a central vertical curved Gola profile with protection against scratches or damage during transport.
The bracket with expansion screw is designed to secure the mounting of the Gola profile to the furniture module, providing a safe and strong system.
The following video shows how you can easily install the RGB control with the LED light controller.
The expansion screw allows the bracket to be firmly fixed to the profile and the module, ensuring a stable and reliable installation in different configurations.
Yes, this bracket is compatible with all Gola profile systems used in kitchen units and furniture.
The bracket is made of steel with a zinc-plated finish, ensuring durability and corrosion resistance.
The packaging includes 50 units of brackets with expansion screws, ready for installation in furniture projects.
Yes, you only need to press the MATCH button on the controller and the ON/OFF button on each remote to link it.
Yes, just press the MATCH button on each controller and the 1,2,3 or 4 buttons on the controller to link it.
One LED controller can be connected to 10 remote controls.
One LED controller can be connected to 10 Wi-Fi modules.
One remote control can be linked to 20 LED controllers.
The kit includes 8 accessories for the Gola-R top profile, designed to ensure a perfect finish at the end of the furniture assembly.
One Wi-Fi module can be linked to 20 LED controllers.
These fittings are used for the ends of profiles, ensuring a precise fit and a clean finish on kitchen furniture.
No, the fittings are designed to be press-fitted, so no screws or tools are required for installation.
They are made of high-quality, resistant plastic, ensuring durability and impeccable aesthetics.
Yes, these accessories are compatible with all available Gola-R profile finishes, including matt white, black and matt anodised.
The Wirly sensor must be connected after the converter because it is a sensor that works at 12V DC or 24V DC.
The Optima cutlery tray finishes are of high quality, with a design that ensures strength and durability, adapting to various kitchen styles.
Yes, the Optima cutlery tray is compatible with both Vantage-Q and Slim drawer systems, provided the module and size are compatible.
Optima cutlery trays are made of high-quality, resistant plastic, guaranteeing durability and ease of cleaning.
No, Optima cutlery trays are not designed to be cut, but are available in various sizes to fit different drawer sizes.
The modular design of the Optima cutlery tray allows you to reorganise kitchen utensils efficiently, maximising the space available inside the drawer.
The bottom protector is made of aluminium with a textured finish, ideal for resisting moisture and ensuring durability in use.
Yes, this protector is designed to be resistant to moisture, daily wear and tear and possible liquid leakage.
Yes, the bottom protector can be easily trimmed to fit the specific dimensions of your module.
The protector is compatible with modules 600 mm wide and standard depths of 564x507 mm or 530x196 mm depending on the model.
It is installed directly onto the base of the module, making sure it fits snugly to protect the inside of the cabinet from leaks or liquids.
The set includes 2 x 2.35 m long plinth bars, 2 x 90 degree joints and 2 x flexible joints for customised installation.
The plinths are made of sturdy plastic with black or anodised finish, while the connecting fittings are made of highly durable plastic.
Yes, the skirtings can be easily cut to fit the specific measurements of your kitchen, ensuring a perfect fit.
This batch of skirtings is available in a height of 100 mm and a length of 2.35 m per bar, allowing for different design needs.
Installation is simple, using the included joint fittings. These ensure stable mounting, either in 90-degree corners or with the flexible joints for other configurations.
The Austin furniture handle has a total length of 184 mm, which gives it an elegant and functional design for different types of furniture.
The following video shows how the sliding door system for wardrobes is assembled.
The Austin handle is made of aluminium, a light and strong material, ideal for use in furniture.
The distance between the fixing holes is 128 mm, making it compatible with common standards in the furniture industry.
Yes, the matt chrome finish is wear resistant and provides additional protection against corrosion, maintaining its appearance for a long time.
Yes, the handle includes the necessary screws (M4 screws) for quick and easy installation.
The Portland furniture knob is made of Zamak, a robust and durable material that guarantees a long service life.
The Portland knob has a diameter of 24 mm, making it ideal for a wide variety of furniture.
The packaging includes a knob and an M4 screw for quick and easy installation.
Yes, the chrome finish is resistant to everyday wear and tear, maintaining its shine and elegant appearance over time.
The Portland knob is suitable for kitchen, bathroom, home and office furniture, offering versatility and modern design.
The Dortmund handle is made of ABS, a light, strong and durable material, ideal for long-term use in kitchen furniture or cabinets.
The Dortmund handle has a diameter of 98 mm and a 64 mm spindle, which makes it suitable for a wide range of furniture designs.
It is compatible with kitchen furniture, cabinets and other types of furniture, especially those that require a modern and functional design.
Yes, the handle includes the necessary screws to facilitate quick and easy installation.
Yes, the mocha painted finish is highly resistant to daily wear and tear, maintaining its aesthetic appearance over time.
The Sedaví handle is made of zamak with an aluminium painted finish, offering strength, durability and a modern design.
The handle has a length of 137 mm and an interaxis of 128 mm, which makes it suitable for various types of furniture.
Yes, the Sedaví handle is ideal for kitchen, bathroom, office and other spaces, thanks to its functional and aesthetic design.
Yes, it includes the necessary M4 screws to facilitate immediate installation.
The handle can be installed in either horizontal or vertical orientation, adapting to the requirements of the furniture.
The Xirivella handle is made of aluminium with a matt anodised finish, which guarantees resistance and a modern design.
In order to secure the rails of the Space + sliding door system, it is recommendable to use 4 x 25 mm screws (code 5032505) for 16, 18 and 19 mm units.
The handle has a length of 64 mm and an interaxis of 32 mm, ideal for various furniture applications.
Yes, the Xirivella handle is perfect for kitchen, bathroom, home and office furniture, thanks to its versatile and durable design.
Yes, the product includes M4 screws required for easy and secure installation.
Yes, the Xirivella handle can be installed both horizontally and vertically, adapting to different furniture designs.
The Nantes handle is made of aluminium, which guarantees durability, strength and lightness.
The Nantes handle has a length of 198 mm and an interaxis of 128 mm, making it ideal for different furniture designs.
Yes, the Nantes handle is versatile and suitable for kitchen, bathroom, home and office furniture, offering functionality and style.
Yes, the product includes M4 screws required for easy and secure installation.
The Nantes handle has a stainless steel anodised finish, which gives it a modern and elegant design.
For the assembly of Free Face profile hands for board of 19-20 mm alongside the Space+ sliding door system, it is necessary to choose an outside runner with a thickness of 30 mm and adhesive spacer cod. 4000820.
For the assembly ofFree Face 2 profile hands for board of 19-20 mm alongside the Space+ sliding door system, it is necessary to choose an outside runner with a thickness of 23 mm.
The upper reinforced runner acts as a thread for the runners on the Space+ sliding door system. This profile offers greater resistance to torsion than the runner that is not reinforced, therefore it is ideal for large wardrobes with heavy doors that weigh up to 85 kg each.
For the assembly of the Free poor alongside the Space + sliding door system, it is necessary to choose an outside runner with a thickness of 30 mm.
The Malmo handle is made of ABS, a strong and durable material that provides excellent impact protection.
The handle has a length of 167 mm, with an interaxis of 96 mm, ideal for various types of furniture.
It is available in two finishes: painted aluminium and painted black, to suit different styles of decoration.
Yes, the Malmo handle is perfectly suited for kitchen, bathroom, home and office furniture thanks to its strength and functional design.
Yes, it includes the necessary M4 screws for quick and easy installation.
The following video shows how the sliding door system for wardrobes is assembled.
The following video shows how the sliding door system for wardrobes is assembled.
The handles of the Utiel range are made of steel with a satin nickel finish, guaranteeing strength and durability.
This batch is only available in satin nickel finish, which gives it a modern and elegant design.
The dimensions of each handle are 152 mm in length and 128 mm spacing, ideal for different furniture applications.
They include M4 screws designed for fast and secure installation, with perfect fits for furniture.
Yes, the handles are designed to be installed in both horizontal and vertical orientation, depending on the need of the furniture.
Benetússer knobs are made of zamak, a resistant material that combines durability and elegant design.
Available finishes include satin nickel and mocha, ideal for matching different styles of furniture.
Each knob has a diameter of 41 mm, which makes them suitable for small and decorative furniture.
The knobs are easily installed using the screws provided. They can be recessed or surface-mounted according to the desired design.
This set of knobs is perfect for kitchen, bathroom, home and office furniture, such as drawers and cabinet doors.
Although the he adjustable, visible, hanging Neco sliding system allows for a maximum door thickness of 30 mm, the fittings and profiles of the Free aluminium door do not allow for the assembly of this sliding door system.
The lot includes 20 Paiporta handles and all the M4 screws necessary for their installation, individually packed to avoid knocks and scratches.
The handle is suitable for kitchen, bathroom, home and office furniture and can be installed on both horizontal and vertical doors.
Installation is carried out by fixing the handle with the M4 screws included in the package, ensuring a firm and durable hold.
The Paiporta handle is made of zamak, a robust and corrosion-resistant material, ideal for prolonged use.
It is available in various finishes, such as chrome, painted black, painted aluminium and satin nickel, to suit different styles and preferences.
The set includes 25 Albal knobs made of zamak, together with the screws required for installation. Each knob is individually packaged to avoid damage during transport.
Albal knobs have a diameter of 16 mm, which makes them ideal for small furniture or as decorative details.
Albal knobs are available in chrome and satin nickel finishes, offering options for different decorative styles.
Albal knobs are ideal for kitchen, bathroom, home and office furniture, adding a modern and functional touch.
Each knob is individually packaged, which guarantees protection against knocks and scratches during transport and storage.
The Orlando handle is made of steel with a black painted or satin nickel finish, ensuring durability and a modern design.
The mounting hole spacing of the Orlando handle is 128 mm.
The set includes 10 handles and the M4 screws required for installation.
Yes, the Orlando handle can be installed in both horizontal and vertical orientation, adapting to different types of furniture.
Each handle is individually packed to avoid knocks and scratches during transport.
The following video shows how the sliding door system is assembled.
No, with this system it is very important to respect the maximum and minimum door measurements, as well as the relationship between the breadth, height and weight of it. To do so, you need to consult the following table:TH = Door height, TB = Door breadth, Result = Maximum door weight for the indicated dimensions.Example: Door dimensions 2000 x 850 (THxTB) so Maximum door weight = 23 kg, although the system is for a max 30kg/door.
The Shanghai handle is made of zamak, a strong material that offers durability and a high quality finish.
No, with this system it is very important to respect the maximum and minimum door measurements, as well as the relationship between the breadth, height and weight of it. To do so, you need to consult the following table:TH = Door height, TB = Door breadth, Result = Maximum door weight for the indicated dimensions.Example: Door dimensions 2.000 x 850 (THxTB) so Maximum door weight = 23 kg, although the system is for a max 30kg/door.
The distance between the fixing points is 128 mm, which is standard for this type of handle.
Yes, the Shanghai handle can be installed either horizontally or vertically, depending on the design requirements.
The packaging includes a Shanghai handle and the M4 screws required for installation.
Each handle is individually packed to avoid knocks and scratches during transport.
The Algemesí handle is made of aluminium with a matt anodised finish, which guarantees durability and a modern appearance.
The distance between the fixing points is 128 mm, a common standard for easy installation.
Yes, the Algemesí handle is designed to be installed both vertically and horizontally, depending on the needs of the design.
The lot includes 25 Algemesí handles, each accompanied by M4 screws for installation.
Each handle is individually packed to avoid scratches and knocks during transport.
The following video shows how the sliding door system is assembled.
The Minneapolis furniture handle is made of zamak with a satin nickel finish, giving it durability and a modern design.
The distance between the mounting holes of the Minneapolis handle is 160 mm, compatible with most standard furniture.
Yes, the design of the Minneapolis handle allows it to be installed both horizontally and vertically, adapting to different styles.
The package includes a handle and the necessary M4 screws for mounting, as well as individual packaging to protect against knocks and scratches.
This handle is ideal for kitchen, bathroom, home and office furniture, providing functionality and a decorative touch.
You can mount a handle using the Folding Concepta system always on the door on the other side to the installation.Also, the handle needs to have a centred position in terms of height and be close to the folding area.Example of a mounting system on the left with a handle.
The Santiago furniture knob is made of zamak with a satin nickel finish, offering durability and a modern design.
The package includes a knob and the necessary M4 screws for installation.
Yes, the Santiago knob is ideal for kitchen, bathroom, home and office furniture, thanks to its versatile design.
Each knob is individually packed to avoid knocks and scratches during transport.
Yes, the Santiago knob is designed for installation on both drawer fronts and cabinet doors.
The Milano furniture knob is made of zamak with a satin nickel finish, guaranteeing strength and a modern design.
The package includes a knob and the necessary M4 screws for installation.
Yes, the Milano knob is ideal for kitchen, bathroom, home and office furniture, thanks to its versatile and modern design.
Each knob is individually packed to avoid knocks and scratches during transport.
Yes, the Milano knob is designed to be installed on both drawer fronts and cabinet doors.
The following video shows how the sliding door system for wardrobes is assembled.
The following video shows how the sliding door system for wardrobes is assembled.
The Syracuse handle is made of zamak with a chrome-plated finish, ensuring durability and a modern design.
Yes, the handle can be installed either horizontally or vertically, depending on the needs of the furniture.
The product includes a handle and M4 screws for installation. In addition, each handle is individually packaged to avoid scratches.
It is ideal for drawer fronts and cupboard doors in kitchen, bathroom, home and office furniture.
Currently, the Syracuse handle is only available in 145 mm length with chrome finish.
The handles are made of hollow stainless steel with a black painted finish, ensuring durability and a modern design.
Yes, the handles can be installed either horizontally or vertically, depending on the needs of the furniture.
The set includes 10 handles and the M4 screws required for installation.
Each handle has a length of 220 mm and an interaxis of 160 mm, adapting to different furniture designs.
The handles are individually packed to avoid scratches and to ensure their quality during transport.
The Kansas handle is made of zamak with a satin nickel finish, giving it a modern and durable design.
Yes, the handle can be installed either horizontally or vertically, depending on the needs of the furniture.
The package includes 1 handle and the M4 screws required for installation.
The handle has a length of 140 mm and a 96 mm spindle, ideal for various types of furniture.
The handle is individually packaged to avoid scratches and ensure it arrives in perfect condition.
The Veracruz handle is made of zamak with a matt chrome finish, which gives it a modern design and high durability.
Yes, this handle can be installed either horizontally or vertically, depending on the needs of the furniture.
The package includes 1 handle and M4 screws for installation.
The handle has a length of 150 mm and a spindle of 128 mm, perfect for different types of furniture.
Each handle is individually packed to protect it from knocks and scratches during transport.
The Casablanca handle is made of zamak with an elegant antique gold finish, combining classic design and durability.
Yes, this handle can be installed both horizontally and vertically, adapting to the needs of the furniture.
The package includes 1 Casablanca handle and M4 screws for installation.
The handle has a total length of 116 mm and a 96 mm spacing, ideal for various furniture applications.
Each handle is individually packed to avoid scratches or knocks during transport and handling.
The Doha handle is made of zamak with an elegant antique gold finish for modern design and durability.
Yes, the handle can be installed both horizontally and vertically, adapting to the needs of the furniture design.
The package includes 1 Doha handle and M4 screws for installation.
The handle has an overall length of 110 mm and a 96 mm spindle, suitable for multiple furniture applications.
Each handle is individually packed to protect it from knocks and scratches during transport and handling.
The Burton knob is made of zamak, a strong and durable material ideal for use on furniture.
The Burton knob is finished in satin nickel, providing a modern and elegant look.
Yes, the knob includes M4 screws for easy installation.
The knob has a total length of 40 mm and an interaxle of 32 mm and is compatible with many furniture designs.
Each knob is individually packaged to prevent knocks, scratches and to ensure it arrives in perfect condition.
The set includes 25 furniture knobs, made of zamak, together with M4 screws for installation.
The knobs are made of zamak and have an elegant bronze finish, ideal for classic or vintage styles.
They are ideal for drawer fronts and cupboard doors in kitchen, bathroom, home or office furniture.
The knobs include M4 screws, specifically designed to ensure a secure and stable installation.
Each knob is individually packed to avoid knocks or scratches during transport and storage.
The Mombasa handle includes a zamak handle and an M4 screw for installation.
The handle is made of zamak with an antique gold finish, which gives it a classic and elegant design.
The handle can be installed either horizontally or vertically, depending on the furniture design.
The handle includes M4 screws, designed for secure and efficient fixing to furniture made of different materials.
Each handle is individually packed to avoid knocks and scratches during transport and storage.
The Luanda knob includes a knob made of zamak with an antique gold finish and an M4 screw for installation.
The knob is made of zamak and has an elegant antique gold finish, ideal for both classic and modern styles.
The Luanda knob is designed for installation on drawer fronts and cupboard doors, making it ideal for kitchen, bathroom, home and office furniture.
The included screws are of type M4, offering a secure and efficient fastening in various furniture materials.
Each knob is individually packed to ensure protection against knocks and scratches during transport and storage.
The knobs have dimensions of 20x20 mm, ideal for drawer fronts and wardrobe doors.
The knobs have a chrome finish for a modern look and high resistance to everyday wear and tear.
Yes, the set includes M4 screws necessary for the installation of the knobs, facilitating the assembly.
These knobs are ideal for kitchen, bathroom, home and office furniture, adapting to different styles and environments.
Each knob is individually packed to avoid knocks and scratches during transport and storage.
The Idaho knob has dimensions of 40x40 mm, ideal for complementing drawer fronts and wardrobe doors.
The knob has a gloss titanium finish, which offers a sleek, modern design and resistance to wear and tear.
Includes M4 screws, specifically designed for easy installation in different types of furniture.
Yes, the Idaho knob is designed for use on kitchen, bathroom, home and office furniture, adapting to various decorative styles.
Each knob is individually packed to avoid knocks and scratches during transport and storage.
The Osaka handle has a length of 160 mm and a 96 mm spindle, ideal measurements for a comfortable and aesthetic installation.
It is made of aluminium with a dark grey finish, which provides strength and a modern and sophisticated design.
Yes, the Osaka handle is designed to be installed both horizontally and vertically, adapting to various furniture configurations.
Includes M4 screws, which ensure easy installation and compatibility with different types of drawer fronts and doors.
Each handle is individually packed to avoid knocks and scratches during transport and storage.
The Ribarroja handle has a length of 144 mm and an interaxis of 128 mm, ideal measurements to guarantee functionality and aesthetics in its installation.
It is made of zamak with a black painted finish, offering a modern design and high resistance.
Yes, the Ribarroja handle can be installed both horizontally and vertically, adapting to the needs of the furniture design.
Includes M4 screws for easy assembly and compatible with different types of drawer and door fronts.
Each handle is individually packed to prevent knocks or scratches during transport and storage.
The Varadero batch knobs have a diameter of 25 mm, making them ideal for a wide variety of applications.
They are made of zamak, a strong and durable material. Available finishes are titanium and old gold.
The set includes 20 furniture knobs, including M4 screws for installation.
Yes, the knobs are compatible with kitchen, bathroom, home and office furniture, adapting to different decorative styles.
Each knob is individually packed to avoid knocks or scratches during transport and storage.
The Baltimore handle has an overall length of 211 mm and a 192 mm centre-to-centre distance, ideal for modern furniture.
It is made of zamak, a resistant material, with chrome and titanium finishes available.
Yes, it can be installed in both horizontal and vertical orientation, adapting to different furniture designs.
The handle includes M4 screws for easy installation in doors or drawers.
Each handle is individually packed to avoid knocks or scratches during transport.
The Damascus handle has a length of 149 mm and an interaxis of 128 mm, designed to fit contemporary furniture.
It is made of zamak with a satin titanium finish, ensuring durability and modern styling.
Yes, it can be installed in both horizontal and vertical orientation, adapting to various design needs.
The handle includes M4 screws for easy installation on doors and drawers.
Each handle is individually packed to avoid scratches and damage during transport.
The Portland knob has a diameter of 24 mm, ideal for small to medium furniture applications.
It is made of zamak with a chrome-plated finish, which gives it durability and a modern design.
The packaging includes a knob and M4 screws for installation, ready to use.
Yes, it is suitable for installation on cabinet doors and drawers in kitchens, bathrooms, offices or any furniture.
The Portland knob is individually packed to avoid scratches or damage during transport and storage.
The Lagos handle has a length of 145 mm and a spacing of 128 mm, perfect for furniture of different sizes.
Yes, it is possible to cut the 80 feet. To do so, you need to cut the foot at the leveller part, once this part has been disassembled, and make the cut with a cutting disk/saw that is suitable.
It is made of zamak with a black painted finish, which gives it a classic and resistant design.
The handle can be installed either horizontally or vertically, depending on the furniture design.
Yes, the M4 screws required for mounting are included in the product packaging.
Each handle is individually packed to avoid knocks and scratches during transport and storage.
The following video shows how the sliding door system for wardrobes is assembled.
The RAL number of the white finish on the rails and handles of the Placard sliding door system is approximately 9003.
The RAL code of the anthracite grey finish is approximately 7043.
The RAL code of the black finish is approximately 9011.
The following video shows how the sliding door system for wardrobes is assembled.
The set includes 8 handles, each with a 160 mm spindle, suitable for many types of furniture.
The handles are made of zamak with black painted and satin nickel finishes available, providing durability and modern styling.
Yes, the handles can be installed in both horizontal and vertical orientation, making them versatile for different applications.
The package includes 25 mm long M4 screws, designed to facilitate a secure and stable installation.
Yes, each handle is individually packaged to avoid knocks and scratches during transport and storage.
The following diagram shows the detail of the machining that you need to carry out on the table top of a table in order to fasten the plate of the 60 - 80 feet.
The Bergen handle has a length of 141 mm and an interaxis of 128 mm, which makes it compatible with standard sizes.
The handle is made of aluminium, a light but strong material, ideal for use on furniture.
Yes, the design of the handle allows it to be installed in both horizontal and vertical orientation, depending on requirements.
The package includes a handle and M4 screws for mounting, with individual packaging for protection during transport and storage.
It is available in black painted, gold anodised, rainbow anodised and brass plated finishes, providing multiple decorative options.
No, the clipping pressure is sufficient so as not to require the use of screws, just like with the other Hill 19, Vall 19 and Line 19 aluminium handle profiles for 19 mm thick boards.
The Sofia handle has a length of 157 mm and a centre-to-centre distance of 128 mm, ideal dimensions for various types of furniture.
The handle is made of aluminium, a material known for its durability and lightness, with a modern design.
Yes, the Sofia handle can be installed in either landscape or portrait orientation, depending on the user's preference.
The package includes a handle and M4 screws for installation, individually packaged to protect against knocks and scratches.
The handle has a black painted finish, giving a contemporary and elegant style to the furniture.
The SOB Free-cut 8x3mm LED strip has a high-strength 3M® double-sided adhesive, ideal for installation on flat, clean surfaces. Application on aluminium, lacquered wood, glass or non-porous surfaces is recommended to ensure optimal fixation. For rough or textured surfaces, the use of aluminium profiles with structural adhesive is suggested.
The LED strip can be cut every 6.9 mm without affecting its operation. For connection, we recommend using Lynx-Z Miniled cable, which allows for a secure connection without the need for soldering. This minimises material waste and facilitates installation in confined spaces.
It complies with IP20 safety regulations, which means that it is protected against solid objects larger than 12.5 mm, but not against liquids. In addition, its silicone-coated SMD LED technology guarantees thermal stability and reduced UV emission, contributing to the safety of its installation in furniture and indoor spaces.
Yes, it is possible to put a brake on the central door of a 3 door Placard wardrobe. However, it is necessary to take into account the opening of the central door in order to put the brake in, as it is only possible to have the brake in one direction. In the following diagram you can see the position of the brakes on the rail depending on the opening direction of the sliding doors.
The SOB Free-cut 8x3mm LED strip offers a power of 9.6 W/m with a luminous flux of 1240 lm/m. It is available in two colour temperatures: neutral white 4000K and warm white 2700K, which allows it to adapt to different environments and applications in furniture and decorative lighting.
Yes, the SOB Free-cut 8x3mm LED strip is compatible with connectors and sensors (not included in the package) that allow on/off control and light intensity regulation. The use of compatible controllers with 24V DC power supply is recommended to ensure optimal performance.
The MiniSOB 4.5x3mm LED Strip includes a 3M® double-sided adhesive, designed to guarantee a secure installation on flat, clean surfaces such as aluminium, lacquered wood and glass. For rough or textured surfaces, the use of aluminium profiles is recommended to improve adhesion and dissipate heat.
The strip is supplied in lengths of 1m, 3m and 5m, all with a 1.5m power cable at both ends and Miniled connectors. This allows the strip to be cut to the necessary length and both ends reused without wasting material, facilitating installation in confined spaces.
This strip is IP65 certified, meaning it is protected against dust and low-pressure water jets, making it suitable for installation in kitchen cabinets, bathrooms and other areas at risk of splashing. It is not submersible and should be installed in areas without direct exposure to excessive moisture.
The MiniSOB 4.5x3mm LED Strip has a power rating of 7.2 W/m and a luminous flux of approximately 720 lm/m, ensuring uniform illumination without visible points of light. It is available in two colour temperatures:
-Neutral white (4000K): ideal for functional and modern environments.
-Warm white (2700K): recommended for cosy and decorative environments.
Yes, the LED strip is compatible with connectors and sensors, except Lynx sensors. To regulate the intensity, the use of 24V DC controllers is recommended, ensuring optimal operation and greater control over the lighting.
Assembly is by means of a suspended top rail and concealed bottom rail. A 10 mm deep by 69 mm wide recess needs to be machined in the cabinet to install the bottom carriages.
The system supports up to 50 kg per leaf, provided that the board thickness is max. 23 mm and the specified fittings are used.
Yes, the kit incorporates a "slow" soft closing system that allows a smooth movement and avoids sudden knocks, improving the user experience and the durability of the furniture.
The trolleys are made of steel, which guarantees maximum mechanical strength and excellent performance in heavy-duty installations.
The kit includes all the hardware to assemble 2 doors (1 inside + 1 outside) or 3 doors (2 inside + 1 outside), depending on the selected reference.
This kit allows the installation of 1 or 2 sliding doors with a maximum weight of 20 kg per door leaf, thanks to its undercarriages with heavy duty wheels.
A Ø35 mm hole needs to be drilled in the bottom of the door, with a minimum depth of 14 mm, to accommodate the bottom carriages.
The system allows ±1.5 mm adjustment from the carriage, facilitating fine adjustment of the alignment between doors once installed.
The kit includes the necessary components to assemble 1 sliding door and incorporates lower carriages with wheels and 2 upper guides.
The fittings are made of steel and technical plastic, ensuring durability, wear resistance and quiet operation of the sliding system.
These covers allow the ends of the Railway system profile to be closed off, improving the visual finish, preventing the ingress of dirt and protecting the sliding system.
They bolt directly to the top rail mechanism of the Railway system, and are complemented by the front cover of the same system for total aesthetic integration.
Each side cover is 53 mm wide, 89.6 mm high and 5 mm thick, compatible with the standard Railway system.
They are made of high-strength grey technical plastic, which guarantees durability, dust resistance and ease of assembly.
Yes, they incorporate a small internal fold that favours the precise coupling with the front cover, avoiding displacements or vibrations.
The system can be installed on ceilings or walls. For wall anchoring, the 5 anchors included are required, compatible with partition walls from 18 to 40 mm thick. No prior machining is required.
Each kit supports up to 80 kg per leaf thanks to its heavy duty ball bearing carriages, with ±10 mm height adjustment and anti-slide system.
It includes a soft-close mechanism pre-installed on the trolleys that ensures a soft closing of the doors without bouncing or impact.
The anodised aluminium rail is supplied with a length of 2,000 mm and can be cut to size on site if required. It also includes a 2,000 mm front cover to conceal the sliding system.
The kit contains: 1 top rail, 1 front cover, 1 set of carriages with brake, 5 wall anchors and 1 set of grey plastic side covers for aesthetic finishing of the system.
The rail is installed by a tool-free system using integrated clips. It is designed to be pre-assembled on 19 mm thick boards and is fixed to the top of the cabinet with a minimum depth of 103 mm.
The Clipo 16 system has integrated soft closing technology that improves the opening and closing experience, increasing the comfort of use and reducing the final impact.
The rail is 2 metres long, with 15 mm wide x 15.6 mm deep sections. The inner part is designed to accommodate the clip system and sliding carriages.
Suitable for top mounted interior wooden sliding doors. Ideal for walk-in wardrobes or wardrobes where a discreet integration without visible bottom guides is required.
No, the product only includes the top rail profile. The sliding and braking mechanisms must be purchased separately within the Clipo 16 range.
The front cover enhances the final aesthetic finish of the wall mounted sliding door system by concealing the guides and protecting the mechanism from dust and dirt.
It has a length of 2 m, a height of 89 mm and a thickness of 14 mm. It is compatible exclusively with the Railway wall mounting system.
It is fixed by means of a snap-in system, without the need for additional fittings, which makes it easy to install in wall installations.
It is made of matt anodised aluminium, which guarantees high resistance to corrosion and a homogeneous aesthetics with the rest of the system.
Yes, aluminium allows clean and precise cutting with standard tools, making it easy to adapt to multiple width configurations.
It is designed for wooden sliding doors of the Clipo 15 system. It requires boards with a minimum thickness of 19 mm for stable and strong anchoring.
The profile is milled on the side and is installed by means of pressure secured by the lateral grooves. No complex tools are required, which facilitates fast and firm assembly.
It is made of extruded aluminium with a natural finish, which provides high corrosion resistance and mechanical stability in daily use.
The rail must be inserted into a 12 x 12 mm recess in the top or bottom of the board for optimal socket fixing.
Yes, it can be used for both single and double door configurations, as long as the thicknesses and anchorages required by the Clipo 15 system are respected.
In order to get the door to sit flush with the unit, with the Gilder sliding system, you need to take into account the dimensions of the following diagram:
This kit is designed for sliding doors with a thickness of 21 mm, and includes configurations for 2 or 3 doors (interior and exterior), with top hung and bottom hung rails.
No. This model is not adjustable, so special precision in the measurement and machining of the module is recommended. The fixing is direct with the screws included.
The kit uses trolleys with ball bearings in their axles, guaranteeing smooth and durable sliding. In addition, it includes fixing clips for plates and anti-derailment systems on each door.
The system is designed to hold up to 50 kg per door, ideal for MDF or chipboard with veneer, without deformation or loss of stability.
Each kit contains all the metal components and hardware necessary for the complete assembly of the trolleys, plates, fixing clips, as well as the upper and lower guide system. It does not include the rails and soft brakes, which must be purchased separately.
The following video shows how the sliding door system for wardrobes is assembled.
Each wheel must be inserted into a Ø15 mm hole previously drilled in the door, with a depth of 11 mm. The hole must be centred and drilled with a 35 mm diameter drill bit.
This kit is designed for sliding doors up to 20 kg. For higher loads, Emuca has specific solutions with ball bearings and damping.
Yes. The design of the Glider top rollers incorporates an adjustment system that allows the height of the door to be adjusted within a range of up to 4 mm.
The wheels are made of technical plastic with a metal axle, and the anchoring system uses zamak. This combination guarantees wear resistance and quiet running.
The package includes 1 set of carriages (top and bottom), 4 self-tapping screws and fasteners. It is suitable for 1 sliding door only.
The kit is designed for doors from 16 mm to 19 mm thick, without the need for machining the door edge.
This kit must be combined with the Clipo 16 wood top and bottom rail, made of aluminium and available in 2 m lengths, designed for snap-on mounting.
The system supports up to 15 kg per leaf and is ideal for sliding doors on base units or drawer units with manual opening.
Yes, it includes a retaining clip that acts as a mechanical lock to hold the door securely in position and prevent unintentional opening.
Yes, the kit allows a manual adjustment of ±1.5 mm on the carriages, which facilitates the correct alignment of the doors after assembly.
The rail is installed by bolting directly to the ceiling or top panel of the enclosure. Its profile allows the use of additional anchors to improve rigidity in hanging installations.
The rail has a cross section of 42.5 mm high x 54.5 mm wide. It is designed to integrate directly into the Railway system of suspended overhead trolleys, ensuring stability of travel.
Yes, provided the appropriate Railway trolleys are used, it can support doors up to 80 kg per door leaf, ensuring smooth and safe guidance.
The following video shows how the sliding door system for wardrobes is assembled.
Yes, the 2 m and 3.9 m versions can be easily cut to the desired length with standard tools, always respecting the squareness for correct sliding of the trolleys.
The profile is made of aluminium with a matt anodised finish, which gives it resistance to corrosion, durability and a neutral aesthetic that can be adapted to any type of furniture.
It is designed to be installed in cabinets with 21 mm thick panels, without the need for height adjustment systems. It is fixed by means of standard screws included in the kit.
The system is prepared for 2 or 3 doors, with distribution of 1 inner + 1 outer leaf (or 2 inner + 1 outer in the case of SKU 6051620), allowing sliding without interference between leaves.
This kit supports up to 50 kg per leaf, thanks to the metal ball bearings mounted on steel plates, guaranteeing a smooth and safe movement.
The boards must have a fixed thickness of 21 mm. It is not recommended to use it in lower or higher thicknesses, as this will compromise the stability of the system and the correct fitting of the fittings.
No, this kit is the version without brake or soft-close system. For a cushioned closure it is necessary to opt for the Neco kit with soft-close or regulation, compatible with the same type of rails.
This track requires a groove in the base of the cabinet with a minimum depth of 5 mm and a width of between 15 mm and 32 mm, which allows a stable installation without the need for complex machining. It is essential to respect these tolerances in order to avoid misalignments when moving the door.
This track is designed for use with dual track undercarriage systems compatible with exposed guideways. It is recommended that wheels with plastic or rubber treads are used to minimise wear on the inside channel of the plastic track and to ensure quiet running.
Yes, the rail is made of high-strength technical plastic with a grey finish, specially formulated to withstand moderate loads and prolonged use. Although it does not have the durability of aluminium, it is ideal for domestic applications or light, frequently used furniture.
The following video shows how the sliding door system for wardrobes is assembled.
The product is supplied in units of 2.35 m in length and each package contains 8 pieces. This format is optimised for cut-to-size and repetitive assemblies, facilitating logistics in industrial projects or multiple installations.
It is recommended to store the rails in a horizontal position and protected from sources of heat or excessive humidity. During installation, it is essential to fix it without applying tension, respecting the cutting length and avoiding bending that could affect the guidance of the sliding doors.
This system is compatible with sliding cabinet doors using the Emuca Space system in both 2- and 3-leaf configurations. Doors must have the Space system specific top track to properly accommodate the brakes.
The brake engages in the upper profile and acts on the carriage, damping the final movement of the door and holding it in a fixed position. This reduces impact, prevents bouncing and improves safety and closing comfort, especially in frequently used furniture.
No, the system is designed for installation without additional machining. The brake is installed directly on the top rail of the Space system and acts by pressure on the carriage. It is supplied with screws and Allen key for uncomplicated fitting.
Yes, it is essential to have the Space system specific top track and the corresponding carriages. The brake kit cannot be installed in isolation, as it needs to interact mechanically with these components to function properly.
To fix the rails of the Space+ sliding door system, we recommend using 4 x 25 mm screws (code 5032505) for 16, 18 and 19 mm modules.
An unregulated system like this reduces set-up times and assembly errors by eliminating the need for subsequent calibration. It is ideal for standard production lines or repetitive installations where accuracy comes directly from CNC machining of the furniture.
For smooth operation in unregulated systems, the recommended tolerances are ±0.2 mm in the milling of slide and guideway housings, and perfect alignment between top and bottom rail. Dimensional accuracy is key to avoid chafing or blocking.
The thickness of the door influences the stability and movement absorption. In thicknesses of 25 mm, good structural rigidity is achieved, while 35 mm provides greater strength for tall or wide doors. Both thicknesses are included in the kits available for this system.
The trolleys are designed with wheels made of high-strength technical plastic material to reduce rolling noise. In addition, the concealed mounting of the bottom rail avoids direct contact with the floor, which reduces vibrations and improves the smoothness of the movement at each opening.
Yes, thanks to its compact and concealed design, this system allows LED lighting to be incorporated into the base or top of the module without interference. In addition, as it does not have mechanical regulation, it is more predictable for automation applications in doors with opening or assisted closing sensors.
The Barn system allows installation without machining inside the module, which reduces assembly times and avoids structural errors. In addition, it provides decorative and functional value when integrated as a design element, ideal for rustic, industrial or modern projects with exposed aesthetics.
Yes, for double door installations, the kit can be duplicated or a 4 metre double track can be purchased. It is important to ensure the alignment of the profiles and to leave adequate clearance between the two leaves to avoid interference during opening and closing.
It is not recommended to fix directly on plasterboard without structural reinforcement. To guarantee safety and correct operation, it is advisable to install on brick or concrete walls or to add an internal wooden frame anchored to the metal profiles of the partition.
Periodically check the tightness of bolts, ensure that the wheels do not accumulate dust or debris, and apply dry lubricant to the rotating axle if excessive noise or friction is detected. Black epoxy painted steel is highly resistant, but direct exposure to persistent moisture should be avoided.
The Barn system is designed as a free-opening solution without built-in soft closing. However, it can be combined with external damping accessories or concealed brake guides if they are correctly integrated behind the panel, adapted to the final door travel.
The Clip Space bottom rail is installed without visible fixings, which improves the aesthetics of the module and eliminates the risk of mechanical interference. Its clip fixing ensures a firm fit and allows quick replacement in maintenance environments or modular furniture upgrades.
Thanks to its wrap-around profile and press-fit design, the bottom rail remains perfectly aligned and fixed in its housing. In addition, its inner geometry precisely guides the lower bearings, reducing vibrations and ensuring a straight and smooth trajectory.
Minimal maintenance is required. It is recommended to periodically clean the channel with a dry cloth or compressed air to remove particles. No lubrication is required as the bearing contact with the anodised aluminium already provides a smooth and quiet running.
Yes, the profile can be cut precisely using a thin disc cut-off machine for aluminium. It is important to deburr the ends after cutting to prevent damage to the wheels and to ensure that the clip fit remains intact. It is recommended to always measure with an assembly tolerance.
Yes, it is designed to integrate seamlessly with the brake systems in the Space programme, allowing smooth closure without the need to modify the profile. The rail design facilitates the passage of the damping system without interfering with the path of the lower bearing.
Its compact design hides the soft close inside the rail, offering a damping system without visual impact. This makes it an ideal solution for spaces where clean, minimalist design is key, without sacrificing the functionality of assisted closing.
The doors must be machined at the top edges to accommodate the carriage and the embedded damping system. No visible front perforations are required, which improves the aesthetics of the assembly and speeds up the series production process.
It is essential to reinforce the false ceiling structure with a wooden or metal substructure to support the load of the track and door. The system must be fixed to continuous structural elements, not directly to the plasterboard, to ensure safe and stable operation.
The soft close is optimised for doors up to 40 kg and minimum door thicknesses of 35 mm. Using lighter or thinner doors may decrease the braking efficiency, while heavier doors require the top version of the kit or an additional reinforced latch.
Yes, the system allows integration with automation solutions using magnetic or presence sensors, as its mechanical operation is silent and does not interfere with electronic devices. It is ideal for smart architecture or advanced retail projects.
The system includes a brake with progressive damping that acts on the last centimetres of the stroke, allowing a smooth closing, without bumps or recoil. This feature enhances the user experience and protects the structure of the furniture in the long term.
The brake has been tested to exceed more than 50,000 opening and closing cycles without loss of performance. This makes it suitable for frequently used installations such as kitchen cabinets, offices or partitions in residential and commercial spaces.
The system is designed to be integrated into new installations, but can be adapted to existing installations as long as the track is compatible. Its modular design allows the door to be disassembled and the brake incorporated without replacing the rest of the hardware.
No, the Railway Retrac brake is factory calibrated to activate in the last 80 mm of travel. Its behaviour is constant, which guarantees reliability in multiple installations or in series production without the need for adjustments per door.
In cases where a thinner door is required, it is recommended that an additional rail or profile be added to ensure the correct fit of the trolley and brake. This maintains stability and allows the functionality of the Railway Retrac system to be retained without modifying the hardware.
The flush mounting allows the profile and the hardware system to be completely hidden, achieving a clean and continuous aesthetic finish. It is ideal for high-end architectural projects, hotels or premium homes where design without visible elements is a priority.
It is recommended to leave a slot with a tolerance of ±1 mm to the outer width of the track to allow for insertion and removal if necessary. The alignment must be perfect, as any deviation may affect the movement of the hung door system.
Yes, as it is a technical rail with a clean geometry, it can house linear magnetic sensors or adapt to home automation systems with assisted opening. Its integration in false ceilings favours the concealment of wiring and facilitates connection to home automation control systems.
Matt anodising provides a protective coating that is resistant to moisture, scratching and oxidation, ideal for projects near wet or high traffic areas. Its durability is superior to standard lacquering and maintains aesthetics in demanding conditions.
Yes, the profile can be easily cut with an aluminium disc cutter. It is essential to remove burrs after cutting and to keep the profile clean at the ends so as not to compromise the passage of the carriage and the effectiveness of the integrated brake.
Allows 2 folding sliding doors to be integrated into a small space without the need for a visible bottom rail. The soft closing system optimises the user experience in tall cupboards or integrated in laundry, kitchen or utility rooms, allowing full access without frontal interference.
The new guide profile has been redesigned to provide precise soft closing without the need for counterweights or external mechanisms. This reduces the space required, improves the lateral stability of the blades and eliminates the end stroke common in non-braked systems.
It is recommended to use boards between 16 and 19 mm thick, with good structural rigidity. Clean milling is essential to accommodate hinges and hardware, and close tolerances must be maintained to ensure correct alignment of carriages in combined movements.
Yes, the system is optimised for workshop or on-site assembly using standard tools. The elements fit precisely thanks to templates or visual references that allow manual marking without the need for industrial tooling.
Avoid accumulation of dust on the profiles and check the condition of the brake annually. No lubrication is required if kept clean, but in wet or heavily used areas it is recommended to apply dry lubricant preventively to the piston contact areas.
As it is fully integrated into the module, it improves the aesthetics of the furniture as there are no visible profiles. It also reduces the accumulation of dust or dirt in accessible areas, ideal for high-end furniture, integrated kitchens or minimalist design spaces.
The profile is specifically designed to accommodate the wheels of the Neco trolley set, guaranteeing precise, backlash-free guidance. The geometry adjustment avoids vibrations, allowing smooth running even in modules with tight tolerances.
Yes, it can be cut with an aluminium mitre saw. It is recommended to make a clean cut, deburr the ends and avoid deformation in the wheel contact area. This ensures that the bearing continues to work without interruption or jamming.
The maximum diameter that a table top or surface of a table can have with a Stay 5 or Stay 6 leg in order to avoid it toppling over when we support ourselves on one end is:- 1,000 mm for the Stay 5 legs. - 1,200 mm for the Stay 6 legs.
Its load capacity, combined with the Neco trolleys (up to 50 kg), makes it perfectly suitable for high or frequently used doors. It is made of high-strength extruded aluminium and maintains its shape under prolonged stress without deforming.
The track is compatible with Neco brake systems designed for interior integration. These are housed directly in the rail without affecting the wheel pitch. This allows an invisible design to be maintained without sacrificing the functionality of the soft close.
Its main function is to cover the visible upper part of the bottom rail of the Canal system, protecting the bearing raceway from dust and dirt. This not only improves the aesthetics of the furniture, but also prolongs the service life of the running system and facilitates maintenance.
The cover profile is snapped onto the channel after the bottom guide has been installed. Its design facilitates stable fastening without the need for screws. It can be removed for cleaning or maintenance purposes, provided that the enclosure base is accessible without obstruction.
Yes, the profile is made of extruded aluminium with painted or anodised coating, which allows clean cuts with precision tools (mitre saw with aluminium disc). It is recommended to deburr the edges to avoid snagging during assembly.
Yes, the Placard 74 system allows different panel thicknesses to be used in the same cabinet, and the cover profile is equally suitable for melamine, framed glass or MDF doors. Its flat design maintains a uniform aesthetic regardless of the type of door leaf used.
Simply clean the surface with a soft cloth and a neutral product. In high use environments (commercial or contract), it is recommended to check the profile periodically to ensure that it is firmly fixed and that there is no build-up of debris in the bottom channel.
The track is designed to accommodate Ø16, Ø18 and Ø19 mm flat-bottom castors, allowing the most suitable bearing to be chosen according to the type of board, door weight and interior finish of the enclosure. This versatility guarantees smooth and silent movement without the need for additional adjustment.
Yes, the Placard 74 Classic bottom rail can be fixed directly to level floors of built-in or modular cabinets. In these cases, fixing with structural adhesive or concealed hardware is recommended if access below is limited.
The classic track is visible in the base of the enclosure and is installed on the surface, while the channel system is embedded in the base and allows the run to be covered with a cover profile. The classic track is easier to install and replace, ideal for retrofitting or subsequent changes.
It is essential to make a clean cut with an aluminium mitre saw, deburr the ends and ensure that the resulting section respects the symmetry of the profile. Any deformation can cause jamming or premature wear of the wheels.
Yes, as long as the height of the drawers allows free movement of the door in front. The classic rail does not take up volume inside the module, which facilitates its use in designs that integrate mixed modules without modifying the existing structure.
This M10 leveller can be installed on furniture with melamine, solid wood, aluminium or steel frames that have an internal thread or are prepared to receive an M10 threaded bushing or threaded sleeve. It is ideal for cabinets, display cabinets, counters and support furniture.
The overall height can be adjusted from 67 mm to a minimum of 51 mm thanks to the metric M10 thread. This adjustment is sufficient to correct unevenness of up to 16 mm on uneven floors or to adjust the levelling between adjacent modules.
Yes, thanks to its sturdy plastic base and chrome-plated steel rod, this leveller withstands high loads and is suitable for installations in shops, offices, kitchens or even technical showroom furniture. The circular base distributes the weight evenly without marking the floor.
Installation can be done from the inside of the cabinet using a hexagon spanner or from the outside with a flat tool if the design allows. Adjustment is accessible even when the cabinet is in a vertical position, facilitating on-site installation.
This model is optimised for spaces where the base of the unit has reduced contact with the floor or a more discreet solution is required. Its 43 mm base provides good support on even floors without invading too much visual or functional space.
The following video shows how you can easily assemble the Sling wardrobe lifts.
The following video shows how you can easily assemble the Hang Moka wardrobe lifts.
The wheel includes a square metal plate with countersunk holes for fixing screws. It is compatible with melamine, MDF or metal bases. The use of Ø4 to Ø5 mm countersunk head screws is recommended for a firm anchorage.
Yes, the tread is made of transparent thermoplastic rubber, ideal for vinyl, parquet or laminate floors. It provides a smooth and quiet glide without leaving marks or causing abrasion on sensitive surfaces.
This castor is designed for loads up to 40 kg per unit. For applications above this threshold, it is recommended to use wheels with a higher load capacity or to distribute the load over more wheels to ensure stability and durability.
The version with brake includes a locking mechanism that acts on the rotation of the wheel and the rotation of the axle, which provides greater security in fixed positions. The version without brake is ideal for furniture that requires maximum mobility without the need for locking.
Periodic cleaning of the shaft and tread is recommended to avoid accumulation of dust or fibres that may interfere with rotation. No lubrication is required, as the chrome-plated steel shaft and bearings are designed for long maintenance-free operation.
The recommended depth to properly accommodate the Ø17.5 mm plug is at least 8 mm. This ensures a secure fixing without compromising the integrity of the cabinet base or bottom panel.
Tight tolerance circular machining (Ø17.5 +0/-0.2 mm) with a flat bottom using a Forstner type drill is recommended, allowing a press fit without the need for adhesives or screws.
It is optimised for smooth, hard surfaces such as ceramic, vinyl or varnished wood floors. The technical polymer reduces friction, preventing marks and facilitating smooth and quiet running.
Although this glide is ideal for base or side units, it can be used in larger units if several support points are provided. It is not designed for high structural loads.
Unlike felt, this glide does not peel off or degrade over time. It is also more visually unobtrusive and does not require adjustment like levellers, which simplifies assembly line processes.
The slider lugs fit perfectly into bores of ø5 mm and a minimum depth of 6 mm. This tolerance ensures secure fixing without the need for additional screws, which facilitates mounting in industrial environments.
This model with lugs allows quick assembly by pressure, reducing installation times by up to 40%. In addition, it avoids the use of visible screws, ideal for furniture with a clean or modular design.
Thanks to its low friction and high resistance plastic base, it is especially recommended for ceramic, laminate, vinyl and varnished wood floors, where it provides a smooth and silent glide.
Made of high-density technical polymer, this glide withstands more than 30,000 movement cycles without visible deterioration. Ideal for drawers, occasional furniture or frequently used furniture.
The design is optimised for horizontal applications (furniture bases), but can also be installed vertically in guide or support applications if the housings are reinforced with technical dowels or metal inserts.
The castor incorporates a spigot with thread and plastic fixing nut. For assembly, it is necessary to drill a Ø10 mm through hole in the furniture board (minimum thickness 16 mm) to insert the spigot, which is fixed on the inside with the included nut.
Yes, this castor is suitable for melamine, MDF and chipboard structures. It is recommended to reinforce the fixing point if the furniture is to be moved frequently or is loaded with more than 30 kg.
The nut fixing system allows a more discreet integration from the outside of the module, which improves the aesthetics in light furniture applications. In addition, it is quicker to assemble in series or automated installations.
Thanks to its 50 mm diameter and technical plastic tread design, it performs well on parquet, stoneware or wooden floors with minor unevenness. Not recommended for use on carpeted or carpeted floors.
Provided that there is internal access to the anchorage point for the fixing nut, it is possible to integrate it into pedestals with feet. Otherwise, it is preferable to use models with a front or side mounting plate.
The large diameter plastic base (Ø60 mm) distributes the load efficiently, protecting delicate surfaces such as wooden or vinyl flooring. The M10 stem ensures precise and robust adjustment, ideal for heavy furniture or intensive use.
This leveller supports up to 100 kg per unit, depending on the type of floor and correct installation. On hard floors such as concrete or tile, maximum performance is achieved. On soft surfaces, additional underlay reinforcement is recommended.
Yes, it is compatible with M10 wood insert nuts. It is advisable to use reinforcement sleeves or insert nut with structural adhesive to improve tensile strength in low density panels.
This leveller allows adjustment of up to 25 mm, offering an effective solution for uneven floors. The wide base design helps to maintain lateral stability, even on tall or narrow furniture.
The matt chrome surface treatment provides medium corrosion resistance. For applications in humid environments or protected exteriors, it is recommended to reinforce with a plastic washer or to use versions with specific anti-corrosion coating.
Adjustment is made using a 4 mm Allen key compatible with the hexagon socket of the screw. For professional series installations, the use of an Allen key with a pre-adjusted torque stop is recommended to ensure uniformity without damaging the plastic insert.
The M6 hexagonal 17x10 leveller supports up to 60 kg per unit in static applications, provided it is correctly bolted to metal or reinforced plastic bases. It is recommended to distribute the load evenly to avoid point stresses.
Yes, the steel screw and its metric M6 thread guarantee a good performance in situations with slight vibrations. In such cases, it is suggested to apply a lock washer to avoid loosening over time.
This leveller is compatible with threaded inserts in steel, zamak or glass-fibre reinforced technical plastic. For solid wood or chipboard, it is recommended to use a deep-drawn metal insert for M6 threading.
According to the ISO: 7170:2005 standard, the bracket for circular hanging bars or round tubes can tolerate a maximum weight of 40 kg/metro uniformly spread out.
The zinc-plated finish acts as an anti-corrosion barrier, preventing premature rusting of the screw in environments with high relative humidity (kitchens, laundries, coastal areas). This significantly extends the service life of the levelling system.
The shelf support for a gap slot of 32 mm has two through holes, which enable access through a screw and a manual tool. This makes it possible to fasten the board if that is required, especially in assemblies with very wide continuous shelves.
The following video shows how the sliding door system for wardrobes is assembled.
According to the number of doors that comprise your wardrobe you can choose between different types of Free aluminium vertical profiles (A, B or C) to obtain different combinations of doors.
Type A. Central door used to create wardrobes with three doors. Created with two handle profiles.
Type B. Outer door used to create wardrobes with two or four doors. Created with a handle profile and a handle cover profile.
Type C. Inside door used to create wardrobes with two or four doors. Created with a vertical profile and a handle profile.
These slides allow installation in modules with a width between 450 and 1200 mm and a minimum depth of 560 mm, facilitating their use in multiple table configurations.
The maximum load capacity of the Shot system is up to 80 kg, allowing it to support a solid and functional support surface.
The slides are fitted with a locking system when open, thus preventing unintentional closing during use.
Yes, the system includes mounting screws for quick installation without the need for additional accessories.
The slides are made of extruded aluminium and have a stainless steel anodised finish, ideal for kitchen environments and modern furniture.
The rails are suitable for modules with a maximum width of 900 mm and a minimum depth of 540 mm.
The system allows a load capacity of up to 60 kg, ideal for creating a stable and functional folding table surface.
The slide has a total length of 895 mm, which allows the table to be extended from a concealed module in a drawer.
The system includes hinged guides for joining the panels, mounting screws and installation instruction sheet.
The slides are made of extruded aluminium and feature a stainless steel anodised finish, ensuring durability and aesthetics in kitchen or office spaces.
The slides have a length of 705 mm and are designed for kitchen environments. They are ideal for a folding table that can be extended from a drawer.
The module should have a width of 450 to 1200 mm and a minimum depth of 500 mm to ensure the stability and functionality of the system.
The system allows a surface of 705 mm to be extended and supports a load of up to 60 kg, making it suitable for everyday functional use.
The system includes the hinged extension rails for connecting the panels, screws and mounting instructions sheet. Support panels are not included.
The slides are manufactured from extruded aluminium with a stainless steel anodised finish, providing corrosion resistance and modern aesthetics for high-end kitchens.
The slide is suitable for module widths of 900 mm, with a minimum depth of 540 mm, allowing it to be installed in multiple kitchen configurations.
The system allows the extension of an auxiliary work surface of up to 500 mm from inside a drawer, ideal for compact kitchen environments.
This guide supports up to 40 kg, provided that it is used in combination with a bottom support profile and the installation recommendations are observed.
Includes screws and complete assembly instructions. In addition, it has a locking system that is activated upon opening to prevent unintentional closing during use.
The stainless steel anodised finish on the extruded aluminium provides excellent wear resistance and a modern, professional aesthetic for demanding kitchens.
The system is suitable for module widths from 1000 mm to a minimum of 450 mm, allowing it to be installed in shelving, living room furniture, home-office and other multifunctional environments.
The system allows a useful extension of 370 mm for an additional concealed auxiliary surface that can be quickly and easily lifted from the cabinet.
The guide offers a load capacity of up to 40 kg, ensuring stability and safety for auxiliary work surfaces.
The kit includes anodised extruded aluminium guides, screws and full installation instructions. It also incorporates a locking system to prevent accidental closure.
Yes, it is designed to be concealed within a drawer or shelf type module, leaving the support surface fully retracted and ready to be deployed when required.
The system allows the extension of a folding table up to a length of 1380 mm with the help of 3 table tops and an integrated double telescopic leg.
Thanks to their compact and extendable design, Party slides can be installed in modules with a width of 900 mm and a minimum depth of 560 mm, making them suitable for kitchen, living and outdoor furniture.
The slides offer a load capacity of up to 100 kg, ideal for robust and functional auxiliary folding surfaces.
The Party system includes telescopic slides, a double aluminium folding leg, hinges for connecting panels, screws and a sheet with assembly instructions.
Yes, the slides are equipped with a locking system that prevents unintentional closing, guaranteeing the safety of the extended surface during use.
The following sketch shows details of the machining that should be carried out for the bracket of the Plus 4-4E-11-16-18 aluminium profiles.
The Twice Top system allows a longitudinal displacement of a surface on a kitchen island or peninsula, offering a functional and discreet sliding support solution.
Enables the extension of a surface area up to 1200 mm with module widths from 600 to 900 mm.
The Twice Top system offers a load capacity of up to 60 kg, ideal for everyday tasks on kitchen work surfaces or auxiliary work.
Yes, the slides are equipped with a locking system that prevents accidental opening, ensuring greater safety during use.
Includes matt anodised aluminium slides, mounting screws, instructions, and all necessary hardware for correct installation. Top panel not included.
The Corner slide allows the diagonal displacement of a surface on a kitchen island or peninsula, facilitating a functional extension with a single movement.
The system is designed for boards with a maximum length of 900 mm and a minimum length of 300 mm.
The Corner system has a load capacity of up to 60 kg, making it ideal for frequent use in modern kitchens.
Yes, the slides are equipped with a locking system to prevent unintentional closing, ensuring safe and stable use.
Includes sliding rails made of extruded aluminium with stainless steel anodised finish, mounting screws and instructions for precise installation.
The following sketch shows details of the machining that should be carried out for the bracket of the Plus 14 aluminium profiles.
The system allows a longitudinal displacement and 180° rotation of the surface on a kitchen island or peninsula, ideal for flexible and functional use of space.
The system consists of a double aluminium folding leg, a system of sliding and rotating guides, and guide profiles that allow an extension of up to 960 mm.
It allows a minimum installation length of 600 mm and a maximum of 1500 mm, allowing great versatility to adapt to different kitchen or dining room designs.
The Setentta system is designed to withstand a load of up to 80 kg, guaranteeing strength and stability in daily use.
No, the boards that make up the movable surface are not included. The system includes the guide, the double folding leg, the connecting profiles and the mounting screws.
The following sketch shows details of the machining that should be carried out for the bracket of the Plus 15 aluminium profiles.
The set includes 4 castors in total: 2 with brakes and 2 without brakes, as well as the screws required for installation by means of a mounting plate.
The following sketch shows details of the machining that should be carried out for the bracket of the Plus 7 aluminium profiles.
The castors are made with a sheet metal structure and a transparent plastic body with a flat plate, which gives them a modern and discreet finish, ideal for offices or youth rooms.
Each castor supports up to 40 kg, offering a reliable solution for light, everyday furniture in home or office environments.
They have a diameter of 35 mm and are recommended for occasional furniture, drawer units or desks where fluid movement is desired without compromising the visual design.
Thanks to their transparent plastic design and smooth surface, they provide a smooth ride that minimises the risk of marks on delicate floors.
The clamp is specifically designed to be compatible with the Noline and Plasline socket ranges, offering a quick and secure solution for mounting with square base Bone lifting feet.
The clamp fits into a 28 mm slot in the plinths, securing the part without the need for tools, thanks to the design of sliding tabs that make it easy to fit and remove.
The system accommodates both plastic and wooden bases, as the clamp is optimised to fit securely on both, ensuring versatility in modular or bespoke projects.
No, the design of the clamp allows tool-free assembly and disassembly, facilitating efficient installation even in series or industrial production environments.
The system is completed by a square base for the Bone elevating foot and a flange that fixes the clamp firmly, preventing unwanted movement thanks to its optimised design for a stable fit.
The following video shows how you can easily assemble the abovementioned storage system in a kitchen.
To ensure precise mounting, a guide bore of Ø7 mm with a minimum depth of 14 mm is recommended. The maximum permissible clearance is ±0.1 mm in order to maintain the correct coupling with the T15 eccentric and to avoid unwanted movements after assembly.
Yes, the design of the double hinged pin has been optimised to fit both Ø15 mm and Ø18 mm eccentrics. The intermediate joint facilitates aligned insertion and improves adaptability to different joint configurations in knock-down furniture.
Made of high-strength zinc-plated steel, this bolt withstands a tensile load of over 700 N when properly assembled with T15 eccentrics. It is ideal for structural applications in kitchen units, cabinets or office furniture with high mechanical demands.
The 15.5 mm movable arm compensates for small machining misalignments and is particularly useful in configurations where panels are not perfectly square. It facilitates assembly even on production lines with slight deviation tolerances.
It is not recommended for use in thicknesses less than 16 mm, as the retention of the eccentric and the minimum insertion depth of the bolt would not guarantee the necessary structural strength. For thin boards, specific shallow depth fittings should be used.
The bracket is designed to accommodate glass shelves with glass thicknesses between 6mm and 10mm. The clamping system with lugs provides a firm fit, provided the glass thickness is within this range and the edge has been bevelled or tempered for safety.
No, this bracket allows direct installation without the need to drill holes in the shelf. Adjustment is made by pressure and contact with the nickel-plated steel plug, which fits firmly under the shelf, preventing displacement during use.
Although it has been specifically designed for glass, it can be used with melamine or wood shelves with rounded edges up to 10 mm thick. In these cases, however, it is advisable to carry out prior fixing tests to check the stability of the assembly.
For 16 mm panels, the use of 4 x 16 mm screws with chipboard or melamine thread is recommended. It is important not to over-tighten, as this could deform the bracket or damage the nickel-plated coating. In industrial installations, the use of screwdrivers with torque limiters is recommended.
For safe installation, the table top should be machined with a Ø20 mm hole to a controlled depth of 12.5 mm. This recess must be 1 mm from the panel edge to ensure the correct fit of the piston protrusion ring.
The plunger is part of the System 16 coupling system and is designed to mate directly with a compatible eccentric, without the need for additional hardware. Adjustment is by axial pressure and rotation, providing a robust and removable joint.
Recommended for use on chipboard, MDF or melamine boards 25 mm thick. For hardwoods or composite materials it is advisable to check the machining tolerance, as the hardness of the material may affect the accuracy of the fit.
The recommended tolerance for the bore diameter is ±0.1 mm. An out-of-tolerance bore may compromise the stability of the assembly or create clearances that affect the attachment of the eccentric to the plunger.
The zinc-plated finish provides corrosion protection and improves the mechanical strength of the zamak. This is especially important in high humidity environments or in heavy duty furniture where long term structural durability is required.
It is recommended to use a Ø5 mm drill bit to ensure precise insertion of the Euro screw. The drill hole should have a minimum depth of 11 mm and should be drilled to tight tolerances to avoid looseness or breakage of the material.
This screw is optimised for wood-based materials such as chipboard, MDF or melamine. Its design allows for strong fastening without the need for metal inserts, making it ideal for quick assembly of demountable furniture.
Emuca Euro screws are manufactured to DIN standards and meet TSCA Title VI assembly system strength requirements, offering maximum compatibility with modular structures in kitchen and office furniture.
The ideal torque for this screw is between 3.5 and 4 Nm. It is recommended to use torque-controlled screwdrivers to avoid head deformation or damage to the fastening material, especially in low-density boards.
The zinc plated finish provides superior corrosion protection and improves screw adhesion in porous materials. It is ideal for applications in humid environments or furniture that require a long service life without surface rust.
This bolt is specifically designed for use with 25 mm diameter eccentrics in furniture joining systems. Its compatibility ensures a solid, fast and secure joint in all types of furniture.
The bolt thread has an overall length of 38 mm and a diameter of 7 mm, which allows for efficient assembly with 12 mm thick boards, offering versatility in standard furniture configurations.
The zinc-plated finish of the bolt provides excellent protection against corrosion and oxidation, ideal for ensuring the durability of the hardware in environments with high mechanical and environmental resistance requirements.
The countersunk head allows a precise fit with the eccentric, optimising the tightening torque and improving the aesthetic finish of the assembly, as it is perfectly flush with the fitting.
The bolt is supplied in industrial packaging of 2,500 units, facilitating supply on production lines or assembly lines with high component turnover.
The following video shows how you can easily assemble the abovementioned storage system in a kitchen.
The following video shows how you can easily assemble the abovementioned storage system in a kitchen.
The scoop shape provides a wider and more stable support for the shelf, preventing slippage and reducing pressure points on the wood, which increases the durability of the furniture.
The bracket requires a minimum depth of 10 mm for secure fixing of the 5 mm diameter bolt, allowing firm anchoring in standard wood or melamine panels.
The unit on which the Titane hinged column is installed requires at least 4 hinges for the column to work properly.To this end, we recommend installing the column with soft-close hinges X91 or X92.
Nickel plating provides a corrosion and moisture resistant protective layer, ideal for environments such as kitchens, bathrooms or heavy duty furniture where high wear resistance is required.
The bracket has a total length of 18.5 mm from the base of the stem to the end of the support, allowing a compact installation without protruding excessively from the side of the furniture.
Yes, the bracket is designed for moderately loaded shelves in home and office furniture, provided that the diameter and mounting depth specifications are respected.
The bracket is designed for glass panels with a thickness of 4.5 mm, ensuring a firm fit without the need for additional adapters.
The bracket is pressed into a hole drilled in the side of the module. The stem is inserted 7 mm from the edge and secures the glass by means of its coupled shape with a 16 mm high support base.
The support base is 10 mm long and 16 mm high, providing a stable platform that prevents the glass panel from slipping.
Yes, this bracket is ideal for display cabinets, light shelving or decorative modules where a visually unobtrusive and effective fixing for glass shelves is required.
The product is presented in boxes of 2000 units, facilitating handling and replacement for furniture manufacturers, assemblers or professional installers.
No, a Titane bottle rack can only be assembled on the left-hand side, as you have the guide rails on the left-hand side.
The Luna cup is designed for boards up to 16 mm thick, being compatible with the most common thicknesses in home or bathroom furniture shelves.
Requires pre-machining with a Ø20 mm diameter housing, which can be carried out on the underside of the module or shelf where the cup is to be inserted.
Yes, the compact design and white or brown plastic finish allow for unobtrusive integration into the furniture, ideal for both open and interior shelves.
It acts as a plug-in support for shelves and shelves, providing a secure connection without the need for screws, which facilitates the assembly and disassembly of the shelves.
The Luna cup offers a hidden and resistant joining system, avoiding visible fittings and improving the aesthetics of the furniture without compromising the stability of the shelf.
The double bolt allows for solid joints between pieces of furniture, especially in configurations that require simultaneous vertical and horizontal fastening, optimising the assembly and structural strength of the module.
Its design allows for a more even load distribution, improves joint stability and reduces the number of parts required when joining two components with a single element.
The bolt has an overall length of 62 mm and a diameter of 6 mm. Each end incorporates holes for 6 mm bolts and an end housing for 10 mm head bolts.
It is made of steel with a zinc-plated finish, which provides high resistance to oxidation, ideal for humid environments or industrial applications with high mechanical demands.
The product is delivered in packs of 1000 units, facilitating its management and replacement for manufacturers, industrial carpenters and furniture distributors.
The metal pin is manufactured from turned steel with a diameter of 3 mm and a length of 10 mm. This configuration provides a firm and precise insertion in standard 3 mm holes, offering excellent shear strength in light racking.
The bracket is available in a white finish and in a transparent version, allowing it to be aesthetically integrated into various furniture designs without compromising the functionality of the fastening system.
The bracket is 10 mm high and 12 mm deep, making it ideal for shelves where a discreet but effective fixing is required. Its compact dimensions maximise usable space in furniture interiors without visible interference.
Yes, the bracket is available in kits of 1000 and 100 units, facilitating its use in both one-off installations and industrial assembly line projects. Its bulk presentation optimises logistics and storage.
There are versions for 5 mm bore holes without bolt (plastic insert only), as well as 3 mm models with steel bolt. This makes it possible to adapt to different configurations depending on the module design or project requirements.
This bracket is designed for shelves using a Ø19 mm and Ø20 mm wedge joint system. It is compatible with 18 and 20 mm thick boards, facilitating its use in kitchen, home or office furniture with concealed mounting solutions.
The wedge system provides a robust and completely concealed fixing. It allows vertical and lateral fastening of the shelf without the need for visible screws, improving the aesthetics of the furniture and ensuring a firm and secure installation.
The base of the bracket measures 22 mm × 11.5 mm and is 2.2 mm thick. Its vertical fixing hole is Ø4 mm, while the hole for the wedge system is Ø7 mm. These dimensions allow precise and stable installation in predefined structures.
It is made of Zamak with a nickel-plated finish, which provides high mechanical resistance, durability against oxidation and a discreet and professional visual finish. Ideal for furniture exposed to frequent use or environments with moderate humidity.
Yes, the product is offered in industrial packaging of 2500 units, which makes it a cost-effective and efficient option for manufacturers, joiners and assemblers working in long production runs.
Thanks to its ring design and nickel-plated Zamak construction, this eccentric provides increased mechanical strength and structural reliability in furniture joints. It is ideal for applications where maximum backlash-free clamping is required, even after multiple assembly and disassembly cycles.
It is installed in 18 mm thick boards with a hole diameter of 15 mm. The fixing bolt must have a protruding section of Ø8 mm. Its design allows a centred fixing with lateral or axial fixing screw, depending on the system configuration.
Yes, it is compatible with articulated and expandable joint systems such as T15 and K12 bolts, making it a versatile solution for modular structures, shelving or demountable cabinets.
Its nickel-plated finish provides rust resistance, durability against humid environments and a professional finish on the inside of furniture. Ideal for carpentry projects that require a clean aesthetic even inside visible structures.
Yes, this eccentric is supplied in packaging of 1250 units, ideal for manufacturers, industrial assemblers and carpentries that work with volume, allowing an optimisation in stock management and assembly logistics.
The following video shows how you can easily assemble the abovementioned storage system in a kitchen.
This bolt is specifically designed to achieve invisible and structurally sound joints in bed, wardrobe and kitchen unit assemblies. It is ideal for use in configurations that require maximum strength with no visible elements on the outside of the furniture.
The solid bolt has a diameter of 6 mm and a total length of 33 mm, making it easy to mount in robust structures. In addition, it has an M6 thread and is installed in a ø6 mm hole, offering precision and strength.
It is optimised to work in conjunction with K12 cams, ensuring a firm and stable hold on heavy duty furniture. This combination allows for concealed internal fastenings without compromising the aesthetics of the design.
No, a Supra bottle rack can only be assembled on the left-hand side, as you have the guide rails on the left-hand side.
The zinc-plated finish provides a protective coating against corrosion and rust, making it ideal for wet environments or kitchens. This treatment prolongs the life of the hardware and maintains its functionality in demanding conditions.
The solid bolt comes in boxes of 2,500 units, which allows for efficient stock management in industrial operations and large assembly lines, reducing logistics costs and optimising production times.
This screw is optimised for strong joints in melamine or chipboard, where the fine thread pitch improves grip without requiring pre-machining. It is ideal for structural assemblies in modular furniture.
The tapered head provides a clean, aesthetically pleasing and ergonomic finish, especially useful in visible applications. It also distributes pressure better over the surface of the material, reducing the risk of cracking in the boards.
The 7 mm thread section allows for greater holding capacity in the body of the board, improving tensile and torsional strength. This geometry increases the durability of the assembly, even during disassembly and reassembly cycles.
The nickel-plated finish offers excellent resistance to corrosion, making it easy to use in humid environments or under heavy use. In addition, it provides a shiny and homogeneous metallic aesthetic that enhances the quality perception of the furniture.
The product comes in a packaging of 2000 units, ideal for production lines, assembly shops or large-scale distribution. This quantity allows optimisation of continuous supply in intensive assembly processes.
The plastic coating provides a double function: it improves the fixing by reducing play during assembly and acts as an insulator that protects the joint against vibration or noise. In addition, it improves sliding during assembly with eccentrics.
It is specifically designed for use with the K12 eccentric, forming a strong and secure jointing system for kitchen units, wardrobes and beds. The bolt end fits into the standardised eccentric housing.
The bolt has a total length of 33 mm, with an anchorage area of 17 mm in the cabinet and a shank diameter of 6 mm. These dimensions optimise the load distribution in transverse joints without compromising the structural stability of the module.
Zinc plated finish provides effective protection against rust, ideal for wet environments or where durability is required. Increases component life without affecting fit tolerances or compatibility with standard hardware.
This bolt is widely used in furniture assembly on production lines, especially in kitchen modules, bed frames and demountable cabinets. The 2500-unit packaging makes it easy to supply for high-volume industrial projects.
It is specifically designed for the installation of cup hinges and fastening hardware on furniture, providing precise and secure screwing into wood and wood-based materials.
It has an extra fine pozidrive thread, which guarantees an excellent fixation without damaging the material, ideal for joints where a strong and precise fixation is required.
The nickel-plated finish provides high resistance to rust and corrosion, ideal for installations in humid environments such as kitchens and bathrooms, prolonging the life of the hardware.
The screw is available in 3.5 mm diameters with lengths of 16 mm or 19 mm, in packs of 1000 or 2000 units, facilitating its use in large volume projects.
It is recommended that a compatible screwdriver or pozidrive tip is used to ensure accurate insertion and to prevent wear to the screw head during assembly.
The M6 ring bolt is made of zinc-plated steel, which provides excellent mechanical and rust resistance. Its design with fine thread and ring on the end makes it ideal for strong, removable joints with K12 eccentrics.
This bolt has a total length of 33 mm, with an M6 fine thread body and a ring diameter of 7.7 mm, ensuring precise compatibility with 15 mm diameter eccentrics such as K12. Its fine thread facilitates a tight fit on boards of varying thickness.
It is especially useful in joining systems for highly demanding furniture, such as beds, wardrobes, tables and frequently used structures. Its high strength allows safe assembly in dismountable and modular furniture.
For assembly, we recommend the use of precision tools that allow drilling holes of Ø6 mm for the thread and Ø7.7 mm for the ring socket. It is essential to use an eccentric model K12 to complete the connection system.
The bolt comes in packs of 2500 units, designed for furniture manufacturers, industrial carpenters and wholesale distributors who require large volumes with maximum assembly efficiency.
It is mounted on the base of the unit by means of 4 screws Ø4 x 25 mm included in the set.
The Míro brackets are designed to hold wooden or glass shelves with a thickness between 4 and 20 mm, thanks to their design with a top cover that fixes the shelf without special machining.
According to the UNE-EN14350:2006 standard, each support can support up to 40 kg, which makes them suitable for both domestic and professional environments that require a firm and secure hold.
This bracket is wall-mounted by means of plugs and screws included in the set, and its zamak body together with the plastic cover ensure a precise and aesthetic fixing.
The aluminium painted finish, together with the plastic and metallic materials used, provides good resistance to humidity, although it is recommended to avoid prolonged exposure to direct water.
The design of the Miro stand combines elegant curved lines with a concealed fixing system, allowing it to be integrated as a decorative element in visible rooms in the home or office without compromising the aesthetics of the environment.
The following video shows how you can easily assemble the Inox plate racks.
The distance between the rods of the dish draining rack is 18 mm.Each of the rods is 7 mm wide.
The following video shows how you can easily assemble the microwave frame.
This bolt has been specifically designed for use with Ø12 eccentrics, ensuring a firm and secure fixing in furniture structures such as wardrobes or beds.
The bolt has a thread diameter of 6 mm and a total length of 42 mm. These dimensions make it ideal for invisible joints, offering good penetration and anchorage without compromising the structure.
It is recommended to install this bolt in boards with a minimum thickness of 12 mm, which ensures optimum resistance to tensile stresses and prevents the material from weakening.
It is made of zamak with a natural finish, an alloy that provides high hardness, good mechanical strength and excellent corrosion resistance in indoor environments.
It has a PZ 2 head, allowing the use of standard Pozidriv screwdrivers for fast, ergonomic and safe installation without the need for special tools.
This bolt allows invisible joints to be made in structures such as beds, wardrobes or shelves, facilitating 90-degree corner connections without the fittings being visible from the outside of the furniture.
It is made of steel with a zinc-plated finish, which gives it high resistance to mechanical stress, durability and effective corrosion protection, ideal for intensive use in professional furniture.
Assembly requires the use of an eccentric compatible with the System Ø10 coupling system, as well as a hole in the panel with a diameter of 6 mm, a height of 38 mm and a free area of 23 mm for the correct location of the bolt.
It is especially useful in applications that demand high visual discretion and structural strength, such as solid wood beds, modular design cabinets or factory-assembled shelving.
The bolt comes in industrial packaging of 1,000 units, optimised for the supply of wholesalers, manufacturers or specialised workshops that require volume and logistical efficiency.
The plunger acts as a support and internal fixing piece that ensures the correct union between the board and the elements of the joining system. Its metallic design and zinc-plated finish guarantee stability and mechanical resistance.
This model is designed to integrate perfectly with metal bases such as Say 4 and Say 8, allowing different mounting configurations for panel thicknesses of 16 mm.
The zinc-plated finish provides an anti-corrosion coating that protects the part against humid or harsh environments, improving its durability in intensive manufacturing environments or prolonged transport.
The RAL code of the white finish of the Optima cutlery holder is approximately 9003.
The RAL code of the grey finish of the Optima cutlery holder is approximately 7001.
The RAL code of the anthracite grey finish of the Optima cutlery holder is approximately 7043.
The plunger is supplied in 1,000 or 1,125 pieces per box, ideal for large accounts, production lines or technical distribution of professional furniture fittings.
For optimum performance, we recommend the use of the complete Say 4 or Say 8 system, which includes the necessary support bases and screws for robust fastening to 16 mm boards.
The zinc-plated finish provides effective protection against rust and corrosion, which is essential to ensure the durability of the joining system even in wet environments.
This plunger is optimised for 14 to 18 mm thick boards and allows precise insertion into a 7 mm diameter hole, with an overall length of 12.5 mm, facilitating its use in multiple furniture assembly formats.
The plunger acts as the bolt receiving point within the System 10 system, ensuring a firm hold in furniture structures through quick and precise insertion, without the need for special tools.
The Optima cutlery holder has a wide range of models and sizes. The cutlery holder intended for the Vantage-Q drawer is not compatible with the Slim drawer. as a a cutlery holder model exists for the Slim drawer.Both models have the same depth but not the same width, specifically, the cutlery holders for the Slim drawer are 6 mm narrower than the cutlery holders for the Vantage-Q drawer.
The metallic steel body offers high mechanical strength and prolongs the life of the joint assembly, making it especially useful in industrial, contract or high traffic applications.
Each presentation includes 2,000 units, making it ideal for furniture manufacturers, wholesalers and assembly lines requiring efficient, large-scale assembly solutions.
Yes, for panels of 16 mm thickness, is possible to use the module 500 mm Vantage-Q drawer.
The nut is designed for use with screws and holes with a diameter of 3.5 mm. This assembly ensures optimum fixing when the part is pressed into boards that accept 16.6 mm diameter holes, allowing a firm and secure connection.
The nut is installed by pressing it into a cylindrical hole with a depth of 13.3 mm, which corresponds exactly to the height of the nut. This depth ensures that the part is completely aligned with the board surface.
The zinc-plated finish protects the steel nut against corrosion and rust, making it ideal for furniture applications in humid or heavy-duty environments. This surface treatment prolongs the life of the part and maintains its mechanical strength.
This system is ideal for concealed or reinforcement joints in cabinet modules, wooden structures or assembled components where screw fixing from the inside is required without compromising the external aesthetics.
The product is packaged in packs of 1250 units, which is suitable for large production runs or continuous assembly on assembly lines. This presentation allows cost and time optimisation in high volume projects.
Thanks to its self-adhesive backing, this bumper sticks easily to clean, dry melamine, glass, metal, wood or plastic surfaces without the need for tools or drilling.
The semi-transparent finish allows the bumper to blend discreetly into furniture of any colour or texture, ensuring effective protection without compromising the aesthetic design of the furniture.
It is ideal for use in assembly lines for cabinets and doors, especially in kitchens, bathrooms or office furniture, where damping of the closure or subtle separation between components that may generate contact noise is required.
The 10 mm model offers more contact surface and impact absorption and is therefore recommended for larger or heavier doors. The 7 mm is more discreet and suitable for lower load or reduced visibility applications.
The presentation in packs of 2500 units allows efficient replenishment in industrial processes, optimising production times and reducing costs per unit. Ideal for distributors, manufacturers and workshops with high turnover.
The bracket needs a Ø 10 mm hole to insert the main body, and a second Ø 8.5 mm hole for the adjusting pin that secures the shelf in its horizontal position.
The base of the bracket is semi-circular with a diameter of 14 mm, which provides a large contact surface that improves the load distribution and stability of the shelf.
The main body is 12 mm wide by 15.5 mm high, while the attachment piece is 8 mm wide. These dimensions allow for a precise and secure fit in standard wood panel configurations.
The nickel-plated finish not only improves the aesthetics of the component, but also increases its resistance to corrosion and wear, making it a durable solution for demanding environments.
Thanks to its robustness and professional finish, it is ideal for kitchen, bathroom, office furniture or serial carpentry installations, where discreet and resistant solutions are required with a high volume of units per packaging (2,000 units).
We have protectors designed for assembly in kitchen floor units and in sink floor units.They are produced using natural textured aluminium with a plastic strip around the border that protects the unit from small leaks or from cleaning products.These protections are sized for 16 mm and 18 mm board, for special measurements consult the conditions.
This bolt is used as an invisible connecting element between panels, ensuring closure and fixing by means of Ø16 eccentrics. Its design allows a solid connection from the inside of the furniture without leaving visible elements on the outside.
It has an M6 thread, standard in the furniture industry, which facilitates its compatibility with eccentrics and other clamping systems available on the professional market.
The bolt has a diameter of 7 mm and a length of 23 mm plus 9 mm for the threaded part. These dimensions are optimised to ensure structural stability when joining panels without compromising the interior space.
Zinc plating provides a protective layer against corrosion and mechanical wear, increasing the service life of the bolt even in humid environments or with high rotation of use, such as in kitchen or contract furniture.
The bolt comes in boxes of 2500 units, ideal for automated assembly lines or large-scale projects where homogeneity, logistical efficiency and volume cost reduction are required.
Yes, it's very easy. Simply use a ruler and cutter to trim the sink protector to the size you want.Run the cutter along the line several times, then bend along the cut and you can cut the aluminium panel.
This clamp is suitable for nail fixings in timber or board structures. Its design with teeth on both sides allows secure anchoring to hold parts in place without the need for complex machining.
The Ø 4 mm central hole allows the insertion of an additional screw to reinforce the mechanical fastening. Compatible with standard small diameter wood or chipboard screws.
The zinc-plated finish provides a layer of corrosion protection that improves the durability of the steel against moisture and rust, making it ideal for demanding mounting environments.
The clamp is 22 mm long and 18 mm wide. These compact dimensions make it ideal for invisible or space-saving mounting without compromising clamping force.
It is ideal for back fixing in cabinets, kitchen units, shelving or modular applications where concealed but strong fastening is required, especially in board or plywood structures.
The bracket incorporates a 5 mm diameter, 10 mm long plastic wedge that is pressed into the pre-machined hole in the side of the cabinet. This press-fit fixing ensures quick installation without the need for additional tools.
It is designed to accommodate glass shelves with a thickness between 4 mm and 6 mm, securely fastened with a plastic screw included, preventing slippage and damage to the glass.
The body of the bracket measures 18 mm long by 8.7 mm high, allowing for unobtrusive integration into furniture structures while maintaining a high holding capacity without compromising on design.
The body is made of zamak, a tough alloy, and coated with a nickel-plated finish that offers excellent protection against corrosion and wear, ideal for wet or demanding environments.
The product is supplied in boxes of 1000 units, making it an efficient solution for joinery, furniture industries, technical distributors and manufacturers who require volume and reliability in their glass support systems.
The following video shows how you can easily assemble the profile system Gola.
For installation it is necessary to drill a 15 mm diameter hole in the panel and a Ø8 mm hole to insert the bolt, which is connected to the eccentric from the edge of the panel. This configuration allows a strong and concealed connection between pieces.
The T15 eccentric is compatible with the following bolts: Hinged bolt for T15 eccentric Ø15, expandable bolt Fit Ø10, double bolt for T15 eccentric Ø15 and expandable bolt Fit Ø8. This provides flexibility in the joint system according to the furniture design.
Natural Zamak offers excellent mechanical strength, high dimensional stability and superior durability against wear, making it a robust solution for demanding assemblies in the furniture sector.
This piece is designed for boards of at least 13 mm thickness, ensuring a correct accommodation of the fastening system without compromising the structural strength of the joint.
The Ø15 mm design improves the gripping capacity and load distribution on the panel, resulting in a firmer anchorage and increased reliability in applications requiring repetitive or demanding mounting.
The Big Ø35 bolt has a total length of 49 mm, which allows a firm and deep connection in the panels. This length promotes a solid connection between pieces of furniture, especially on shelves that require high strength.
This bolt has an EU M8 thread that offers compatibility with a wide range of Big Ø35 eccentrics. The thread ensures a secure anchorage that does not loosen easily over time or with frequent use of the furniture.
It is necessary to drill a Ø9 mm hole to correctly accommodate the threaded part and ensure a stable fixing. This machining facilitates precise installation in panels with the correct dimensions.
It is made of steel with a zinc-plated finish, which provides excellent resistance to traction, wear and corrosion. This surface treatment guarantees durability in humid or demanding environments.
The packaging in 500 units facilitates the supply of production lines or for industrial projects, reducing logistics times and guaranteeing immediate availability during series assembly.
This bracket is designed to accommodate glass panels with a thickness between 4 mm and 8 mm, guaranteeing a secure, backlash-free fit thanks to its L-shape and integrated plastic damping.
The vertical fixing hole shall have a diameter of 4 mm and be located in a 17 mm wide plate. The plate must allow for an anchorage depth of at least 13 mm to accommodate the entire bracket.
The nickel-plated zamak body provides mechanical strength and durability against corrosion, while the tough plastic in the area in contact with the glass provides cushioning and prevents slipping or damage.
The following video shows how you can easily assemble the Gola profile for ovens.
The bracket forms a 90° angle bracket which, together with the vertical fixing hole, allows the bracket to be firmly anchored to the panel, while the plastic cup ensures that the glass is supported without movement.
The product is supplied in packs of 1000 units, which optimises procurement for furniture manufacturers and distributors who require volume assembly or continuous production lines.
The bracket is inserted into the panel by means of a 5 mm diameter hole, which is necessary to accommodate its metal spigot, ensuring a firm fixing without the need for additional screws.
The piece has a total length of 27 mm, a height of 12 mm and a width of 9 mm. The external visible part corresponding to the plastic cup has a length of 14 mm, ideal for maintaining a discreet aesthetic.
The steel provides structural strength and stability, while the clear plastic finish on the support area minimises the risk of slipping and protects the glass from scratches, ideal for display cabinets or visible shelving.
It is specifically designed for glass panels used in horizontal shelving. Its low profile design and secure support make it compatible with standard glass, requiring no additional adhesives or fixings.
It is supplied in packs of 1000 units, facilitating storage, handling and distribution in industrial environments or mass production projects that require consistency and continuous availability.
The Big Ø35 eccentric stands out due to its larger size and clamping capacity, specially designed for the Big Ø35 bolt. This makes it ideal for large-format, robust furniture structures where a stronger and more durable fastening system is required.
To install the Big Ø35 eccentric, a 35 mm diameter hole must be drilled, with a depth that allows the part to be completely housed, taking into account its 17 mm height. The channel for the passage of the bolt must have a distance of 9.5 mm from the top.
Both finishes provide high corrosion resistance, however, natural zamak has a more neutral and uniform aesthetic for applications where the surface finish is not visible. Zinc plating adds an extra layer of protection for more demanding environments.
No, this part is specially designed to work in conjunction with the Big Ø35 bolt, so its compatibility is limited to specific joining systems that require high structural strength in furniture assembly.
The Big Ø35 eccentric is available in packs of 250 units, facilitating its management in automated production lines and optimising stock for distributors and manufacturers who require components in large volumes.
The zinc-plated finish provides the bolt with excellent protection against rust and corrosion, making it a reliable choice for installations in environments with variations in humidity or intensive industrial conditions.
This bolt is installed by pressing it into a drilled hole. It has a diameter of 7 mm, a total length of 28.5 mm and an EU M6 thread, which guarantees a precise fit in System 10 systems with a board thickness of up to 18.5 mm.
It is designed for invisible joints in furniture structures such as beds, shelves and wardrobes. Its robust and discreet design ensures structural stability without compromising the aesthetics of the furniture.
This bolt is fully compatible with System 10 joining systems and requires machined holes for precise assembly. Its use with specific eccentric or tensioning elements allows assembly without the need for complex tools.
The System 10 hitch bolt is delivered in packs of 1000 units, which facilitates logistics and supply in large-scale assembly lines in the furniture industry.
In addition to concealing the eccentric and improving the aesthetics of the furniture, this plastic cap has a flange that locks the Big 35 eccentric, thus preventing it from moving or loosening due to vibrations or handling over time.
This plug is exclusively designed to be compatible with the Big 35 eccentric, fitting perfectly to ensure an aesthetic and functional fixation within the joint system.
The plug has a diameter of 42 mm and a thickness of only 1 mm, which allows a flush installation. The anchor flange is 12 mm long, which ensures a firm fixation inside the eccentric.
It is ideal for home or contract furniture using the Big 35 eccentric system, especially in visible applications where it is desirable to conceal hardware and maintain a clean, professional design.
The Big 35 eccentric stopper is supplied in packs of 500 units, which is optimal for industrial processes and furniture manufacturers requiring large volumes in an efficient manner.
This bracket is designed to accommodate glass panels with a thickness between 4 mm and 8 mm, making it a versatile solution for different types of tempered glass shelving.
Requires a Ø4 mm diameter drill hole to insert the attachment to the vertical board. The support section measures 18 mm wide by 7.7 mm high, ensuring a precise and stable hold.
It is made of steel and plastic with a nickel-plated finish and a zamak base. This combination guarantees high corrosion resistance, excellent mechanical behaviour and modern aesthetics.
The bracket incorporates a 13 mm long semi-circular metal piece, which presses against the glass from the inside of the bracket, firmly securing the panel without the need for additional tools.
Its minimalist and decorative design allows for aesthetic integration without visual interference in high-end furniture projects, offering a technical solution without sacrificing contemporary design.
The zinc-plated finish gives the screw excellent resistance to corrosion and rust, making it a durable and safe choice for furniture structures exposed to moisture or aggressive environments.
It is specifically designed to be used on boards with a thickness of 25 mm, allowing a firm and optimal fixing when working in conjunction with System Ø16 fastening systems.
This screw has a PH-2 head, which allows installation with standard screwdrivers or power tools compatible with Phillips #2 bits, optimising professional assembly.
Combined with the plungers and bolts of the System Ø16 coupling system, they guarantee secure, durable and precise connections, providing an effective structural solution even for furniture under constant load.
The screw is 13 mm long and is manufactured with a thread compatible with M10 hardware. Its design is optimised to ensure perfect alignment inside the corresponding hitch system.
The flat head allows the screw to be completely flush with the surface of the board, giving a clean and professional aesthetic finish, ideal for visible applications in melamine or chipboard furniture.
This screw is ideal for fastening in materials such as melamine, MDF or chipboard, thanks to its 6 mm fine pitch thread that ensures a firm grip without damaging the structure of the board.
With a length of only 17 mm and a design that allows the screw head to be concealed, this model minimises the risk of contact with protruding edges, making it suitable for furniture in spaces frequented by children.
For a safe and precise installation, it is recommended to drill a 5 mm diameter hole beforehand, ensuring the correct insertion and fastening of the screw without damaging the material.
Both finishes improve corrosion and rust resistance. Zinc plating offers a high degree of protection and durability, while nickel plating adds additional aesthetic value for more visible applications.
This nut is specifically designed to be assembled with M6 threaded bolts, forming a robust and secure joining system for furniture panels.
It has a grooved segment in the body that prevents unintentional twisting once inserted, ensuring a firm fit without the need for additional tools.
The nickel-plated finish significantly improves corrosion and wear resistance and offers a shiny aesthetic ideal for visible or high-end assemblies.
The nut has a 29 mm long body and a 7.6 mm diameter insertion end. The head has a diameter of 14 mm and is cross-milled for ease of fitting.
It is ideal for invisible joints between wooden panels or derivatives, as it allows the assembly from the edge of the boards, hiding the system and preserving the aesthetics of the furniture.
The T15 eccentric requires a 15 mm diameter housing in the table top for proper installation, ensuring a firm and discreet assembly in wooden furniture.
For proper mounting, the thread must be at a distance of 7 mm from the edge of the board, allowing a secure fixing with the corresponding bolt.
This model is available in three different finishes: natural zamak, zinc-plated and nickel-plated. This makes it possible to adapt to both functional and aesthetic criteria of the furniture.
The T15 eccentric is compatible with board thicknesses of 15 and 16 mm, making it versatile for multiple configurations in cabinets, shelving and modular furniture.
Its main function is to lock the embedded bolt in the wood to ensure a hidden, strong and resistant joint, optimising the aesthetics and rigidity of the assembled structure.
The fastener is made of plastic, a material renowned for its strength, lightness and durability. In addition, its transparent finish allows for discreet aesthetic integration into the furniture without altering the visual design.
It is installed by press-fitting into a 5 mm diameter hole, pre-drilled in the furniture panel. Its conical shape ensures a stable fixing without the need for additional tools.
Yes, it is designed for wooden shelves, providing firm support in applications such as cabinets, kitchen furniture or domestic shelving. Its design reduces the risk of damaging the board surface.
Its shape allows for quick and error-free insertion, ideal for repetitive industrial processes. The transparent finish provides an aesthetic and clean solution, highly valued by manufacturers and carpenters who prioritise visual detail.
The fastener is marketed in batches of 5000 units, allowing high availability in assembly lines and warehouses. This presentation is ideal for medium-high volume projects in the furniture sector.
The double-jointed design allows for variable angle joints in wood panels, adapting to multiple assembly configurations. This makes it ideal for custom assemblies or structures with non-orthogonal inclinations.
This bolt has been specifically designed to work with the components of the 10 mm hitch system, such as the corresponding plungers and bolts, ensuring a secure, aligned and robust assembly.
Manufactured from turned steel with a zinc plated finish, it offers high mechanical strength and excellent protection against rust and corrosion, making it a reliable choice for industrial applications and professional carpentry.
The bolt body has a diameter of 7 mm and a total length of 89 mm. The joint is located right in the middle, facilitating precise installation with fixing points at both ends.
It comes in packs of 500 units, which allows an optimum supply in medium volume projects, reducing supply time and facilitating management in warehouses or workshops.
This bracket is designed for the secure placement of glass panels with a thickness of between 4mm and 6mm, making it compatible with most standard tempered glass shelves used in home and office furniture.
The glass is fixed by means of a lower plastic screw that fits the panel optimally, ensuring that it is held in place without damaging it. This solution also allows for quick and easy installation.
The main body of the bracket is made of zamak, a robust and warp-resistant material. Its nickel-plated finish enhances the aesthetics of the product and adds an extra layer of protection against corrosion.
The bracket has a total height of 14 mm, a depth of 18 mm and an extra thickness of 3 mm on the side for using countersunk screws. These dimensions allow a discreet and stable installation on vertical panels.
The stand is delivered in boxes of 1000 units, which makes it ideal for large volume furniture projects such as commercial installations, mass production of furniture or contract projects for hospitality and retail.
The UniBlock cups are available in two versions covering board thicknesses from 16 to 19 mm and from 22 to 30 mm, which allows a great versatility of use in furniture of different characteristics.
The cup has a diameter of 18 mm and a height of 5 mm. Its 25 mm wide central base is designed for firm integration into the board. In addition, its channel area allows for precise and efficient mounting together with the central fixing screw.
The part is mostly made of high-strength and durable plastic, while the fixing screw is made of zamak, which guarantees a firm and secure anchorage for the horizontal brackets of the UniBlock system.
The packaging contains 2500 units, ideal for industrial projects, mass production or mass installations in contract environments such as offices, modular kitchens or shops.
The fastening is done by means of a zamak screw inserted in the central hole of the cup, which goes through the reinforcement channel and secures the support to the board in a precise, firm and wear-resistant way by repeated use.
We have a KIT with cod. 5205020 that allows you to transform the AMP connections to Miniled in order to use it with this converter.
The maximum dimensions per door are 2400 high and 500 wide (per door leaf).
This bolt is designed to join panels that form a 90° right angle, ideal for furniture and cabinet corners, providing a strong anchorage in square configurations.
The bolt has a diameter of 10 mm, with a 77 mm arm for the inner joint and a 65 mm arm for the outer joint, which provides a secure anchorage in boards with Ø16 mm holes.
It is made of steel with a zinc-plated finish, which ensures mechanical strength and corrosion protection in heavy-duty applications or environments with moderate humidity.
Its angled design allows perpendicular panels to be joined together without the need for additional structures, optimising interior space and maintaining solid joints in hard-to-reach areas.
The 90° double bolt is available in packs of 200 units, making it easy to integrate into industrial production lines, modular furniture assembly and wholesale distribution.
The Twofold system offers the versatility of sliding well when assembled with and without a lower guide. Whether it is used depends on the type of wardrobe in which the system is mounted.
This bolt has an M6 thread which ensures a solid fixing and is compatible with System Ø15 mm coupling system nuts. This standard is common in technical assemblies of modular furniture.
The bolt has a length of 48.5 mm and a body diameter of 7 mm, which allows for a precise fit in the specified joining systems without compromising the structural integrity of the module.
Zamak provides high resistance to mechanical stress, while the zinc-plated finish improves its corrosion resistance, guaranteeing durability in environments of intensive use.
No special tools are required; the bolt design is optimised for efficient assembly according to the instructions in chapter 4 of the coupling system catalogue, making it easy to integrate into production lines.
The product is supplied in packs of 1000 units, ideal to meet the demands of mass production or for distributors working with large assembly volumes.
This screw is available with Allen 3, Allen 6 and PZ2 heads. The Allen 3 head is recommended for more precise assemblies with lower torque, while Allen 6 and PZ2 are more versatile for general and automatic applications in production lines.
This screw allows installation in 12 mm boards and in an adjustable range of 14-16-18-22-26 mm, guaranteeing a secure grip on a wide variety of board thicknesses within modular or bespoke projects.
The screw is manufactured from steel with a zinc plated or black zinc plated finish, providing excellent protection against rust and corrosion, ideal for use in kitchens, bathrooms and industrial environments with high humidity.
The finishes for these supports are RAL9006 for the aluminium colour and RAL8019 for the Moka colour.
It is designed to work in conjunction with System 10 coupling systems, being compatible with pins, double hinged pins and ring plungers from the same system, facilitating a robust and uniform integration.
What is the packaging format and how is it adapted to large productions?
The following video shows how the sliding door system for wardrobes is assembled.
To install the Miniluna cup correctly, it is necessary to drill a 15 mm diameter and 6 mm deep hole in one of the boards. In addition, a 15 mm x 6 mm arm must be used, which is inserted into the edge of the other board.
This system allows a clean and firm joint between two boards, functioning as a hidden support. Thanks to its design, the joint is practically imperceptible, ideal for applications where aesthetics is a priority.
The Miniluna cup is attached to pre-installed pins by means of a press fit. It is recommended to use bolts compatible with 15 mm diameter cups to ensure a perfect fit on 13 mm thick boards.
The following video shows how the sliding door system for wardrobes is assembled.
It is made of high-strength grey plastic, which makes it durable, lightweight and easy to assemble. Its finish provides stability to the joint, even in furniture that requires frequent assembly and disassembly.
The Miniluna cup measures 15 mm in diameter and 18 mm in length and is compatible with 13 mm thick boards. It is ideal for joining applications in home and office furniture where a compact and effective fixing solution is required.
For correct installation, a 75 mm deep hole must be drilled using a 3 mm diameter drill bit. This dimension ensures a firm and secure anchorage inside the board.
The bracket is inserted at its narrowest part by pressure until it is completely recessed. Once in place, its wider end is visible and ready to support the shelf.
The bracket is 16 mm long, with a diameter of 5 mm in the shelf-supporting part and 3 mm in the insertion area. These measurements optimise stability and weight resistance in thin boards.
It is made of steel with a nickel-plated finish, which gives it a high resistance to wear and corrosion. This finish also offers a professional and unobtrusive aesthetic for visible applications.
The metal bracket is designed to be used on wooden boards of at least 10 mm thickness, ensuring secure fastening without compromising the structural integrity of the furniture.
The following video shows how the sliding door system for wardrobes is assembled.
It is recommended to use a flat head screw with a diameter of 3.5 or 4 mm, which ensures a firm and proper fixation without damaging the board material.
No, the UniBlock system allows fast and reliable assembly without the need for tools. Only a small insertion stroke is required, which optimises installation time on the assembly line.
This bracket is designed to be used exclusively with the UniBlock system cups. Together they allow invisible and firm joints to be made in boards of different thicknesses.
The UniBlock hook-on bracket is available for different board thicknesses: 16 mm, 19 mm, 25 mm and 30 mm, allowing a wide versatility for modular furniture projects.
The bracket is made of zamak with a nickel-plated or rust black finish. This treatment provides high resistance to corrosion, durability and an aesthetic finish in keeping with high-end furniture.
The following video shows how you can easily install the Pegasus illuminating bathroom mirror.
The cup acts as an indispensable element of the UniBlock system, providing a solid and secure connection between the brackets and the horizontal wooden panels. Its design facilitates assembly without compromising the stability of the furniture.
It is specifically designed for panel thicknesses between 16 and 19 mm. Its depth and internal geometry are optimised to ensure a perfect fit of the support inside the wood panel.
The cup combines a plastic body that provides insulation and lightness, together with a zamak reinforcement in the anchorage area, which improves mechanical resistance and prolongs its durability over time.
The following video shows how you can easily install the Cassiopea backlit bathroom mirror.
Installation requires drilling a Ø20 mm hole in the vertical panel to a depth of 13 mm, normally carried out with a CNC-controlled drill or automatic machinery to ensure mounting accuracy.
Delivered in packs of 2,500 units, it is ideal for large-scale production environments, industrial joinery or distributors requiring volume and logistical efficiency.
The Fit 8 expandable bolt offers superior grip thanks to its expansion system that is activated by inserting an eccentric. This allows for tight, aesthetic and play-free joints, ideal for modular and discreetly assembled furniture.
It is made of zinc-plated steel, which provides mechanical strength and corrosion protection, and plastic on the expandable part, which facilitates installation without compromising the fixing.
The bolt has a diameter of 8 mm, an overall length of 31.6 mm or 21.6 mm (depending on the model) and a specially designed end compatible with eccentrics. It is essential to check the drilling depth and compatibility with the connection system.
This bolt is designed for eccentric connection systems. Its special end allows a perfect fit in the counterpart, offering high stability without the need for additional tools.
It comes in boxes of 2,500 units, ideal for furniture manufacturers, industrial carpentry and distributors who work in serial assembly processes or ready-to-assemble furniture kits.
The following video shows how you can easily install the Hercules mirror with built-ib lighting.
This M6 screw has a Ø14 mm head with cross milling, which allows an excellent fit with standard Phillips tools. This design ensures effective torque transmission and quick installation without slippage.
Thanks to its metric thread and nickel-plated steel construction, this screw is designed for joining boards from the outside. It is ideal for visible joints in home or office furniture where a sturdy and aesthetically pleasing fastening is required.
The M6 screw is available in lengths of 14 mm, 20 mm, 22 mm, 25 mm, 30 mm, 35 mm, 40 mm, 50 mm and 60 mm, adapting to different board thicknesses and jointing requirements. The 20 mm model is a versatile option for standard joints.
The nickel-plated finish provides high resistance to corrosion and oxidation, extending the life of the screw even in wet or high exposure environments. It also enhances the aesthetics of the screw, giving it a shiny, professional finish.
This screw is ideal for professional carpentry, assembly of modular furniture, demountable structures and all types of assemblies where a strong fixing from the outside is required without compromising the design of the furniture.
The zinc-plated finish provides a layer of corrosion protection that enhances the durability of the double bolt in wet or frequently used environments. This makes it a reliable choice for bed frames, tables and cabinets that require long term, durable joints.
This model is specially designed to work with T15 or T15 type eccentrics, offering a precise and secure fit for the assembly of furniture components, with no play and excellent clamping capacity.
The double bolt can be installed in 16 mm and 19 mm thick boards, which are the standard thicknesses in modular furniture manufacturing, allowing for easy integration into automated production processes.
It is essential to drill a 7 mm diameter hole with a depth that ensures the correct fit of the bolt without compromising the stability of the board. It is also recommended to check the alignment with the eccentric to ensure a firm assembly.
The T15 double bolt for eccentric cams is presented in boxes of 500 units, facilitating stock management on production lines and wholesale distributors. Its format is ideal for large-scale furniture assembly and manufacturing projects.
The bracket is installed by means of a Ø5 mm knurled bolt which is pressed laterally into the furniture and a second bolt which reinforces the support.
The main bolt is Ø5 mm and the design allows use with shelves of any thickness.
The use of 4 Beak brackets is recommended to fix a shelf correctly.
Yes, it is suitable for wooden shelves regardless of the thickness of the board.
It is made of zamak and available in nickel-plated or black zinc-plated finish, depending on the selected reference.
It is installed by means of an adhesive base located at the bottom that is easily fixed to the floor without the need for tools.
The cylindrical shape allows for uniform impact distribution and unobtrusive aesthetics, making it ideal for spaces where it is desirable to minimise the visibility of the stop.
Each stop has a compact diameter of 42 mm, making them suitable for confined spaces, passageways and interior doors.
They are suitable for flat surfaces such as ceramic, wood, parquet, vinyl or PVC.
They are made of high-strength transparent plastic, combining durability with a virtually invisible design.
The maximum load capacity is 10 kg per set of brackets, which is sufficient for standard domestic shelving.
The integrated hanger allows the stand to also be used as a coat rack, increasing functionality in small spaces such as hallways, bathrooms or kitchens.
It is recommended to use 600 mm long by 200 mm deep boards for a safe and stable installation.
The kit includes screws and mounting plugs for wall and shelf mounting. Wood screws (not included) can also be used if a more robust fixing is required.
The trolley has a height of 487 mm, a width of 245 mm and a depth of 470 mm. It is compatible with 300 mm wide modules and is suitable for 16, 18 and 19 mm boards.
Includes a basket with frame, a set of full-extension slides with cushioned closure and the screws required for assembly.
The border adjustment system allows adjustments in depth (±1.5 mm), horizontality (±2.25 mm) and height (±7.5 mm), facilitating precise and adaptable integration into different kitchen configurations.
It has full-extension roller guides with soft closing, which ensure smooth and comfortable sliding. It has a load capacity of up to 25 kg.
The following video shows how you can easily install the ironing board.
It is made of steel with an anthracite grey finish, making it ideal for modern kitchens looking for a functional, discreet and elegant aesthetic.
It is available in three different heights: 100 mm, 120 mm and 150 mm, compatible with Noline kitchen plinths.
This model covers a section of 30 mm × 30 mm. The corner is designed with a smooth and elegant curve that adds aesthetics and functionality to the plinth.
The bracket has a "Y" shaped flange on the back which allows easy and secure attachment to the socket without the need for additional tools.
It is made of aluminium with a matt anodised finish, providing high strength and a quality decorative finish.
The following video shows how you can easily install the aforementioned the Vertikal Push 60 multiconnector.
Supplied in packs of 20 units, making it easy to use for serial assembly projects or multiple installations.
This bracket is designed to hang on an aluminium profile, providing a clean and functional mounting without the need for wall or surface fixing.
It has a non-slip EPDM base that prevents the tablet from sliding or slipping while it is resting on it.
It is made of steel with an anthracite grey finish, providing strength, durability and a modern aesthetic.
The tablet can be positioned either vertically or horizontally, offering flexibility for different uses in kitchens or workspaces.
The stand features protective anti-shock tears on the back to protect the tablet during use or handling.
The following video shows how you can easily install the aforementioned the Vertikal Push 100 multiconnector.
The cutlery holder consists of a flat steel structure with an anthracite grey finish and a stainless steel bucket with a chrome-plated finish.
The hub of the cutlery tray has a diameter of 118 mm.
It is designed to hang on an aluminium profile fixed to the wall, allowing a clean and functional installation without taking up space on the worktop.
It includes protective anti-shock tears on the back of the accessory, improving its fixation and stability on the profile.
This design brings a modern and minimalist aesthetic, adapted to modern kitchens, and matches the rest of the accessories in the Titane range.
The following video shows how you can easily install the aforementioned the Vertikal Flat 60 multiconnector.
These hooks are designed to be hung on aluminium profiles fixed to the wall, such as those used in kitchen organisation systems. Their structure allows quick and stable integration into flat profiles without the need for tools.
They are made of steel with a flat steel structure, which makes them highly resistant to daily use. The anthracite grey finish provides durability and a modern aesthetic in keeping with industrial kitchens or contemporary design.
They are ideal for hanging kitchen utensils, cloths and other light, frequently used accessories. Their shape allows them to be held securely without the risk of accidental slipping.
The set includes 5 hanging hooks, presented together for easy installation and replacement in furniture projects or renovation of kitchen spaces.
These hooks are part of a range of accessories optimised for aluminium profiles, such as shelves, roll holders or tablet holders. They can be easily combined to maximise vertical space utilisation in professional or domestic kitchens.
The organiser is fixed with screws (not included) to the shelf of the cabinet or to the base of the drawer. This installation ensures a firm hold that prevents the contents from shifting during opening or closing.
It is designed to hold up to 13 plates with a maximum diameter of 25 cm, making it compatible with standard tableware used in residential and collective kitchens.
The dimensions of the set are 350 mm long by 270 mm wide, allowing it to be integrated into kitchen modules or drawers without compromising functional space.
The product is made of high quality plastic, which provides resistance to continuous use, ease of cleaning and a light weight that facilitates both transport and installation.
The kit consists of 2 side covers and 2 central blocks, which allows a firm hold of the plates in an upright position to avoid breakage during use or transport inside the cabinet.
Each cope bar has a length of 2.35 m and a rectangular cross-section of 11 × 24 mm, which makes it compatible with conventional kitchen installations that require covering the junction between worktop and wall.
The kit includes 2 top bars and 2 sets of installation accessories containing connectors, corner pieces, corner brackets and end caps. All made of grey plastic with satin anodised finish.
Thanks to its integrated flexible seals and plastic coating, the coping effectively seals the joint between the worktop and the wall, preventing liquids from seeping in and dirt from accumulating.
The satin anodised finish provides a clean, modern aesthetic finish that matches steel or aluminium appliances and furniture.
No, the bars can be cut to size according to the kitchen design, and thanks to the included connectors, installation is quick, without the need for special machining.
The 27.2 × 27.2 mm triangular-shaped, 2.35 m long, end caps provide effective coverage at worktop-to-wall junctions in kitchen installations.
They are made of plastic with a satin anodised finish, guaranteeing durability in demanding environments such as domestic or industrial kitchens.
It includes 2 complete sets of connectors, corner pieces, corner pieces and grey plastic end pieces, which facilitates a complete assembly without the need to purchase additional parts.
Yes, the bars are supplied with protective plastic film, which prevents scratches or damage during transport and ensures a flawless finish when installed.
It is recommended to install the coping between two people to ensure accuracy and to apply the end trims to ensure it is watertight against water seepage or debris build-up.
The fittings are made of semi-flexible grey plastic, which allows a high adaptability to the angles of the furniture and a more precise installation, even on uneven surfaces.
The pieces ensure that the ends of the coping are correctly fixed, preventing liquids from seeping in and damaging the material. They guarantee an effective seal to maintain the impermeability of the assembly.
The kit includes 8 accessories per unit, in a packaging of 20 kits. Each kit provides all the necessary elements for the complete installation of a Mixline satin cope.
Yes, they are designed for fast and safe assembly, without the need for complex tools, which optimises time for serial installations or large-scale projects.
The following video shows how you can easily install the Zero system.
This column is designed for kitchen units with a width of 400 mm, a minimum height of 1800 mm and a depth of 480 mm, ensuring compatibility with tall and deep units.
Extraction is carried out automatically by means of a mechanical arm that connects the door to the structure. This allows the 5 baskets to slide outwards when the door is opened (up to 120° opening) for easy access.
The system has a load capacity of up to 40 kg in total. The use of at least 4 hinges per module is recommended to ensure stable and safe operation.
It is made of steel with an anthracite grey finish, which provides excellent strength and durability. The base of the baskets is made of anthracite grey melamine, ideal for resisting humidity and facilitating cleaning.
Yes, the 5 trays included are made of flat wire and can be easily attached or detached, making them easy to clean or replace if necessary.
The adjustable angle allows an opening of between 30° and 180°, offering great flexibility in installation. This feature facilitates adjustment at different corner junctions, optimising installation without compromising the visual finish.
Available in heights of 60, 80, 100, 120, 150 and 165 mm. Each package contains 10 pieces of the adjustable angle.
The product incorporates skirting gaskets on both wings. These joints are located on the inside face of the angle, ensuring a continuous, clean and professional external appearance.
It is made of aluminium with a matt anodised finish. It makes it a durable solution even in damp kitchen environments.
It is particularly suitable for kitchen baseboards, allowing precise installation in corners and junctions without the need for complex cuts, guaranteeing a functional and aesthetic seal.
Yes, the structure must be fixed to the wall in all cases to avoid it tipping over.
No, the assembly and positioning of the rails is the same in both the push and soft close versions.
The profile is fixed to the wall by means of concealed brackets included in the kit, ensuring a clean and stable fixing. It is recommended to mount on resistant surfaces that guarantee the grip of the dowels Ø6 mm and screws supplied.
It includes 3 adjustable brackets with ±5 mm adjustment, allowing the profile to be aligned to ensure a perfectly horizontal installation, even on walls with small irregularities.
Yes, the 1.1 m long profile can easily be cut to size by straight cutting, allowing it to be adapted to smaller spaces or special kitchen configurations.
This profile is designed for the Titane modular range and includes compatibility with shelves, roll holders, hooks, knife holders, cutlery holders and tablet holders, all designed to hang directly without additional tools.
It is made of aluminium and zamak with an anthracite grey finish, which provides high resistance and a modern design, ideal for contemporary kitchen furniture projects and intensive use.
The most common practice is to place the lateral hinges in alignment with the central ones.
However, for closets with really heavy doors, two of the concealed hinges can be placed at the top of the closet to increase resistance and stability.
We would like to remind you that in the case of folding-door or hinged-door assembly, the hanger must go with the lateral supplement.
No, they do not include covers, which are sold separately.
They only include the aluminium profile and the diffusor profile.
Yes, it is a cuttable LED strip by its cutting area (every 55.5mm) and can be connected with a cable and even use a connecting fitting.
Yes, the integrated telescopic slide, made of aluminium with nylon wheels, allows full extraction, providing full access to the cloths without obstructions.
Each arm can pivot up to 90° from its base position, allowing ergonomic distribution of towels according to the space available.
For the 3-arm model (length 440 mm), we recommend an interior clearance of at least 450 mm depth and 60 mm clear height to allow the arms to rotate fully.
The dish drainer is made of AISI 430 stainless steel, a material resistant to oxidation in kitchen environments with high humidity. This guarantees durability against frequent contact with water, vapours and detergents, ideal for installation in domestic or industrial kitchen furniture.
The system includes 8 lateral fixing clamps, which allow the trays to be precisely adjusted to the cabinet in a specific range depending on the model (e.g. 385-420 mm for 450 modules). This type of side fixing provides a firm hold without the need for screwing to the back of the cabinet.
Periodic cleaning with a damp cloth and neutral detergents is recommended. It is important to avoid abrasive or chlorine products, as they may damage the passive layer of the steel. To maintain the original shine, specific products for stainless steel can be used.
Yes, thanks to its lateral adjustment system using tensioners, this dish drainer is compatible with custom-made modules as long as they respect the width dimensions established in each reference.
Yes, the trays for plates, glasses and the drip tray can be easily removed for cleaning or replacement, without the need to dismantle the whole unit. This facilitates regular maintenance in kitchens with intensive use.
For optimal installation, the module should have a minimum depth of 500 mm and an internal width of between 360 mm and 520 mm.
The fastening is carried out by means of screws included in the set. The system is anchored directly to the base of the module, guaranteeing a firm and durable fastening without the need for additional machining.
It is made of steel with a white painted finish, which gives it a clean aesthetic, high resistance to wear and tear.
Yes, the cover can be removed for washing or replacement. It is designed for ease of maintenance and to fit compatible standard size covers (945 × 310 mm).
Yes, the system has metal guides with a full-extension stop, which lock the board when fully extended, providing stability during use.
This frame is designed to fit microwave ovens in 600 mm wide modules, being compatible with appliances up to 600 mm wide by 400 mm high, adjustable by cutting out the integrated grille.
Yes, it is supplied with mounting screws, positioning plugs and trim caps, facilitating quick and professional installation without the need for additional components.
Yes, the design incorporates a weakened grille that allows easy trimming of the internal louvres to achieve an exact fit to the size of the appliance.
Yes, the product includes a step-by-step installation guide, including measurements and recommendations for adjusting the grille cutout and positioning of the appliance.
It is designed for fixed and permanent installation, although it can be dismantled if the microwave needs to be replaced, without compromising the structural integrity of the frame.
No, the minimum unit depth is the same (depth + 5 mm).
The following video shows how a revolving TV base is installed in furniture.
No, it is only compatible for devices that charge using the QI protocol.
The basket measures 380 mm long x 305 mm wide x 500 mm high and is designed for installation in 450 mm wide modules.
The basket comes with boards compatible with 16 mm, 18 mm and 19 mm board thicknesses, making it adaptable to most standard configurations in kitchen or laundry furniture.
No, the basket comes with its own hinged mechanism, so no additional hinges are required. The supplied kit also includes the template for easy assembly.
Yes, the design of the folding system allows a complete and ergonomic opening, optimising access to the inside of the basket and facilitating the loading and unloading of laundry.
The body of the basket is made of high-strength white plastic, while the anchoring plates are made of white painted steel, ensuring a combination of lightness and durability.
The following video shows how you can easily install the aforementioned LED lighting.
The following video shows how you can easily assemble the Shot mechanism.
They are designed for modules with a minimum width of 600 mm and can be installed in drawers with a useful height of up to 140 mm, allowing optimal integration into kitchen or bathroom furniture.
The kit includes 2 large bins 220 x 300 mm and 2 small bins 220 x 150 mm, optimised for sectional organisation within the drawer.
They are made of high-strength ABS plastic with an anthracite grey or white finish. This material provides great durability, impact resistance and anti-scratch finish.
Yes, the kits are modular and can be combined with each other, allowing you to customise the interior layout of the drawer according to the type of utensils or items to be organised.
The cubes are free standing, allowing them to be easily rearranged according to the needs of use without permanent fixings.
Its main function is to assemble the module by horizontally joining the sides, providing a strong and resistant fit that prevents displacement, especially in modules for sinks or areas with an oven.
The following video shows how you can easily assemble the Lunch mechanism.
Installation is by direct screwing using the included accessories (brackets, screws Ø3.5x25 mm and Ø4x20 mm), ensuring a quick and stable connection between the sides of the module.
Yes, both the four 1157 mm cross-member profiles and the bumper can be easily cut to the desired length by means of a straight cut, allowing precise customisation of the assembly.
The crossbar profile is made of matt anodised aluminium, while the brackets and bumpers are made of grey plastic, ensuring corrosion resistance and a professional aesthetic finish.
It is ideal for mounting low modules that require maximum structural rigidity in areas of intensive use, such as under sinks or industrial kitchens, where it is crucial to avoid module movement.
The following video shows how you can easily assemble the Lunch+39 mechanism.
The following video shows how you can easily assemble the Oplà Top mechanism.
The bracket has compact dimensions of 200 mm x 200 mm x 380 mm, allowing it to be easily installed inside cabinets, doors or walls, even in confined spaces.
The following video shows how you can easily assemble the Oplà Folding+39 mechanism.
It is designed to hold electric irons, ironing boards and auxiliary accessories, thanks to its upper metal basket and lower fastening hooks.
Yes, the kit includes mounting screws. Installation is simple and straightforward on the wall or inside the cabinet, without the need for special tools.
Yes, the lower hooks are designed to hold standard ironing boards, ensuring that they are securely fixed in place and prevent them from sliding out of place when the cabinet is opened.
The curved metal hooks secure the ironing board by the legs or base, preventing it from sliding or falling into the wardrobe.
The installation requires a module with a minimum depth of 500 mm and a clear height of at least 162 mm. The inside width of the module must be 40 cm or more.
It incorporates a system of telescopic profiles with smooth extraction, which allows a silent and controlled sliding, ideal for kitchen or laundry modules.
The board offers a 920 mm long x 330 mm wide ironing surface, providing a comfortable and spacious area for frequent domestic use.
Yes, it has a safety clipping system that locks the board when fully open, preventing accidental displacement during use.
The front handle makes it easy to slide and remove the board from the module, as well as serving as a support point to hold it comfortably when opening it.
The following video shows how you can easily assemble the Party mechanism.
Includes a cup tray and a plate tray that holds approximately 24 standard plates, optimising the use of vertical space in tall cabinets.
It is made of steel with an aluminium painted finish, which makes it highly resistant to rust. The anchors are made of plastic and the drip tray is made of transparent plastic, preventing deterioration due to contact with water.
The assembly is carried out by screwing the anchors directly to the inside of the furniture, and includes the screws and 4 plastic strips to ensure the stability of the assembly.
The product is delivered with all components separately: 1 plate tray, 1 cup tray, 1 drip tray, 4 fixing strips and screws for individual assembly.
It is compatible with most 700 mm wide kitchen modules, especially European modular furniture, making it ideal for integration into mass production or refurbishment projects.
The kit incorporates 40 self-adhesive silicone drops, which are placed on the base of each tray to prevent movement during the opening or closing of the drawer, ensuring stability without the need for mechanical fixing.
The following video shows how you can easily assemble the Corner mechanism.
They are made of heavy-duty transparent plastic, which makes the contents easily visible, enhances product durability and withstands heavy use in domestic or commercial environments.
Yes, the design allows cubes to be stacked and combined between different kits, which is ideal for projects where modularity and adaptability in drawer distribution is required.
The kit includes 6 cubes of 75x75x54 mm, 3 cubes of 75x151x54 mm and 1 cube of 153x153x54 mm, which allows a flexible and customisable layout according to the width of the drawer, facilitating its integration in customised projects.
Yes, its waterproof material and closed design make it ideal for use in damp environments such as kitchens and bathrooms, preventing moisture build-up or deterioration.
The following video shows how you can easily assemble the Sestante mechanism.
The following video shows how you can easily assemble the Twice Top mechanism.
The following video shows how you can easily assemble the Simply hidden shelf bracket.
An operational E-Fan air freshener emits 28 decibels, a reduced value considering that the WHO establishes that a continuous noise level of less than 30dB is suitable for resting.
It is compatible with 19 to 20 mm thick doors.
The profile is fixed by means of a 3.7 mm centre groove, which makes it easy to mount and align on the door.
The profile has a width of 47 mm in the vertical part and 25.7 mm in the horizontal part, which allows an aesthetic and functional integration into the furniture design.
Yes, it can be combined with other accessories and profiles from the Free range to achieve a uniform and functional wardrobe design.
No, the packaging includes only the profiles.
The noise levels suitable for our environment depend on our activity, considering we are continuously surrounded by noise such as vehicle traffic, industries and construction sites.
Exposure to prolonged noise can affect our health causing stress, anxiety, irritability, insomnia, fatigue, headache, dizziness, hypertension, muscle tension, heart problems, hearing loss (temporary, irreversible or progressive) and tinnitus.
The range of human’s ear audible sounds is from 0 to 120 decibels (dB), 75dB can be harmful, depending on intensity or exposure time. The noise levels in our environment should be as follows:
- At home from 40 to 50dB. These are the typical values of a quiet room and a conversation with no environmental or background noise.
- To sleep 30dB. The WHO establishes that continuous noise should not exceed 30dB as it can disturb sleep quality, and an instantaneous noise should not exceed 45dB since it can result in waking us up in the night.
- At work 60dB. The usual office environment noise level is 60 dB, being 85dB the maximum allowed in Spain for an eight-hour workday, in case the intensity increases by 3dB, the noise exposure time should be halved.
- In the city from 50 to 90dB. The range is 50 to 90 dB, depending on the city vehicles traffic and the instantaneous noise such as sirens and alarms.
The connection for this type of 230V AC sensor with this converter is very straightforward, it does not require tools or electrical know-how. The quick connection including both the cable and the converter should be simply used.
Yes, they are compatible with Alexa and Google Home. Therefore, the RGB LED strip should be linked with the Smart Home application and this, in turn, with Alexa or Google Home.
The dividers allow the hanger to be installed on the side of the wardrobe, ensuring that it is aligned and that the hangers have the necessary space to move unhindered.
They are easily installed by means of a click-and-lock system, without the need for additional tools.
They are made of durable plastic and are available in all Hang folding hanger finishes, such as anodised aluminium, mocha and black.
The spacers are designed to be installed in standard cabinet sides with standard thicknesses, typically between 16 mm and 19 mm.
No, the spacers do not alter the load capacity of the hanger, as their function is only alignment and lateral fixation.
The slide frame can be adapted to the internal cabinet recesses between 564 and 614 mm, allowing flexible installation according to the dimensions of the cabinet.
No, the soft closing with cushioning ensures a smooth and controlled movement, avoiding sudden bumps when closing the drawer.
I can use the Zero cable profile together with Zero cables and connectors to illuminate the shelves, using the lighting that best suits my design or I can backlight the structure by integrating the LED strips in the vertical profiles using the diffuser profile.
It is recommended to install on boards of 16 mm or more to ensure a firm fixation and to avoid deformation.
The frame is installed by means of an automatic clipping system, which makes it easy to assemble and disassemble without the need for additional tools.
The jewellery drawer is made of wood with interior compartments, while the slide frame is made of mocha painted aluminium, guaranteeing strength and durability.
The bar is compatible with Ø28mm brackets, ensuring a firm and stable fit for installation.
According to ISO: 7170:205, the bar and supports can carry up to 40 kg per metre of evenly distributed load.
No, the bar is supplied without additional accessories. Compatible brackets and screws must be purchased separately.
Available finishes include Titanium, Black, Matt Anodised and Moka, each designed to match different styles of furniture.
Yes, although it is primarily designed for residential furniture, its load capacity and strength allow it to be used in shops, fitting rooms and commercial storage as long as the load limits and distances between supports are respected.
In the commonly used door thicknesses of 40 mm and 45 mm, the clearance between the door and the wall is 14.8 mm and 12.3 mm respectively.
These brackets allow aluminium profiles to be joined together to make display cabinets or cabinet doors, providing stability and strength to the structure.
The use of a suitable screwdriver is recommended for the screws provided, and in some cases a drill for pre-drilling if the profile requires it.
They are made of high-strength steel, guaranteeing durability and stability in the assembled structure.
Yes, each kit includes 4 brackets and 8 screws, ready for installation on Plus 4, Plus 11 and Plus 14 profiles.
The brackets are designed for use with Plus 4, Plus 11 and Plus 14 profiles, which accept glass up to 4 mm thick.
It can be used with any Push magnetic closure.
It can also be used as a door stop.
Screws with a maximum head of Ø5 mm are recommended for installation.
It is available in matt anodised and textured black paint, both with high wear resistance.
Subtract 27 mm from the overall size of the door to determine the exact size of the glass to be installed.
The profile is designed to accommodate 4 mm thick glass.
The Free profiles are compatible with 4 mm glass and 10 or 11 mm thick boards, without the need for additional machining.
For vertical profiles, the measurement is equal to the height of the door (H). For horizontal profiles, 20 mm must be subtracted from the total width of the door.
No, these profiles are designed to require no machining. It is only necessary to make a straight cut in the aluminium profile before assembly.
The use of a 4 mm glass anvil (SKU 7920021) is recommended for a secure hold.
They are compatible with the Space+ sliding system, making them ideal for cabinets with aluminium sliding doors.
It is made of matt anodised aluminium, giving it corrosion resistance and a high quality aesthetic finish.
It is 2.35 metres long, with dimensions of 7.5 mm vertically and 5.5 mm horizontally.
It is designed for edge finishes on cupboard and furniture tops, providing an aesthetic finish and a better grip.
Thanks to its T-shape and central flange, the profile is pressed into the material, ensuring a firm installation.
Each package includes 25 pieces of 2.35 metre long Face T-profiles.
It is 47 mm high and 43 mm wide. The square handle area measures 10 mm high x 18.6 mm wide.
It is compatible with doors from 19 mm to 20 mm thick.
No, it is only necessary to make a straight cut in the aluminium profile, without additional machining.
Available in 2.35 m and 2.9 m bars.
It is made of matt anodised aluminium, which gives it an elegant and durable finish.
Yes, it is possible to recharge the Kaus light with a mobile phone charger. The charger needs to have a type C micro USB and should at least supply 5V DC 1A.
The charging time will vary depending on the amperage of the charger. It is recommended to use 5V DC 1A chargers, therefore the estimated charge time is 2 hrs.
This light has a range of 400 switching cycles per charge before the battery runs out and it has an LED indicator that goes from red to green when the charge is complete following an approximate time of 2 hours.
Yes, it is possible to recharge the Rigel light with a mobile phone charger. The charger needs to have a type B micro USB and should at least supply 5V DC 0,5A.
The charging time will vary depending on the amperage of the charger. It is recommended to use 5V DC 1A chargers, therefore the estimated charge time is 2 hrs.
This light has a range of 600 switching cycles per charge before the battery runs out and it has an LED indicator that goes from red to green when the charge is complete following an approximate time of 2 hours.
These brackets are designed for wooden or glass shelves with a depth of 270 mm, ensuring a stable and secure installation in storage projects or interior furnishings.
Each bracket can support up to 27 kg, provided it is properly installed on a firm wall and combined with compatible rack profiles.
They are compatible with Jagmet's 32 mm pitch double groove profile, widely used in modular adjustable shelving installations.
Each lot includes 20 shelf brackets, making it easy to source for multiple installations or large commercial or residential furniture projects.
The brackets have a height of 52 mm and a straight design that allows installation at 90° to the profile, ensuring perpendicular support of the shelf and preventing slippage.
The RAL code of the anthracite grey finish of the sides of the Concept drawer is approximately 7043.
The RAL code of the white finish of the sides of the Concept drawer is approximately 9003.
The thickness of the board that the sides of these modules can have is from 16 mm to 19 mm, as the luminaire includes lateral supports that adapt to the desired size.
To ensure optimal functioning of the full-extension slides, the module must have a minimum depth of 800 mm.
Installation is carried out using the screws provided. It is fixed laterally to the furniture boards, which should have a recommended minimum thickness of 16 mm for secure fastening.
The hanger includes full-extension metal runners, with a useful stroke of 650 mm, allowing the bar to be fully extracted for easy access to garments.
This hanger is designed for a medium load. It supports approximately 8 to 10 hangers with clothes, ensuring smooth movement without compromising the durability of the runners.
To ensure precise assembly, 3 mm must be subtracted from the interaxis dimension of the brackets when cutting the bar. This tolerance ensures that the bar fits without tension or play, optimising its durability and functionality.
The kit includes M5x38 mm screws, suitable for top installation in boards with sufficient thickness to thread or fasten anchors. Recommended for installation in materials such as MDF, chipboard or wood at least 16 mm thick.
They are designed for lateral fixing (left and right) and are suitable for standard bar lengths (up to 1.15 m). For longer spans or intensive use, it is recommended to combine with compatible centre brackets to avoid bending of the bar.
The brackets are available in Titanium, Black, Aluminium and Moka finishes, allowing them to be aesthetically integrated with other hardware and metal elements of the furniture. They are ideal for projects where design and functionality must be aligned.
These brackets are designed exclusively for Ø28 mm round bars. The use of bars with a different diameter (e.g. Ø25 or Ø30 mm) may cause play, misalignment or impossibility of installation, affecting both the safety and the aesthetics of the assembly.
This set allows a complete module (such as cabinets, drawer units or closed structures) to be attached to the Zero profile system, providing a strong and aesthetic connection without the need for additional drilling of the profiles.
Kit includes: 1 set of brackets (2 pieces), 4 screws Ø3.5x16 mm, 2 M6 screws, 4 cover caps. All the necessary elements for a quick and professional installation.
No, installation is carried out without special tools. The bracket can be adjusted without tools, allowing the module position to be precisely adjusted, even after the profile has been fixed.
It is compatible with modules made of wood, melamine or technical board, which are integrated into the modular structure of the Zero system. Ideal for base cabinets, drawer units or shelving with a closed body.
Available in stone grey (RAL 7048) and textured black (RAL 9005), the brackets are made of zamak with high mechanical strength, and their design with trim caps ensures discreet and elegant integration into high-end projects.
Its function is to close and conceal the end of the Zero profile, preventing the exposed face from being exposed and improving the visual finish of the assembly.
The plug is placed at the end of the Zero profile, ensuring a clean finish on open or visible structures.
It is made of plastic, which makes it easy to install and light and resistant for use in furniture structures.
It is available in black and stone grey, allowing it to be combined with Zero profiles in the same colour.
Each unit includes 1 cap. The packaging is available in packs of 20 units per batch.
It is designed to backlight Zero profiles using LED strips, providing an even diffusion of light from the rear of the profile.
The profile is compatible with the Lynx LED strip, although neither the strip nor the connection accessories are included in the product.
The installation is frontally on the profile, specifically on the rear side, and can even be carried out after the structure has been assembled.
It has a length of 1.1 metres and is made of polycarbonate with a white finish, which favours light diffusion and aesthetic integration.
Each unit contains 1 diffuser profile. The packaging is available in batches of 20 units.
It is designed to locate and conceal the installation cables, facilitating a clean installation in the Zero system.
Installation is from the front on the profile at the rear. It can also be installed retrospectively, once the structure has been assembled.
The profile incorporates flexible tabs that allow the cables to pass through and at the same time prevent them from slipping out, without the need for additional fixings.
It is available in lengths of 1.1 metres and 2.9 metres.
The supplements or bases that are used along with the hinges have two holes for fastening to the furniture and a third hole for increasing the resistance of the hinge/supplement joint. It is especially designed for facilities that require more resistance such as on doors with pistons.
It is made of plastic with a black finish, ensuring a discreet and robust installation within the Zero modular system.
Each cable is 500 mm long and uses a "Y" shaped connector, which allows multiple cables to be interconnected to feed multiple shelves.
The kit is compatible with LED lighting systems from 12V DC to 24V DC, with a total output of 48W/96W.
It includes a black heat-shrinkable profile, designed to conceal wiring in visible or exposed areas of the structure.
Yes, it is specifically intended to illuminate shelves or modules within the Zero modular system. It must be used with Lynx LED strips (not included).
They are made of plastic, which facilitates a safe and light installation within the modular system.
The following video shows how to assemble such a box in a simple way:
Each set contains: 1 wall mounting, 1 leveller, 1 profile connector, 1 profile cover, 4 screws Ø4×30, 4 dowels Ø6×30, 4 screws Ø3,5×16 and the necessary accessories for installation.
It is designed for the "L" assembly of the Zero modular system, fixing the profile to both the floor and the wall.
The components are made of zamak with a textured stone grey finish (RAL 7048) and grey plastic.
No, the Zero system is characterised by assembly without the need for special tools or disassembly of components.
The system can support more than 100 kg per shelf or module, increasing the clamping force as weight is added.
The following video shows how such a system is easily assembled:
The following video shows how such a system is easily assembled:
The hinge is specifically designed for interior glass doors, providing a smooth and safe opening system.
The hinge allows a maximum opening angle of 110°, offering a wide and comfortable opening.
It is made of zamak, an alloy of aluminium, magnesium and copper, which gives it high strength, durability and the ability to withstand heavy weights.
Installation is simple and only requires the use of screws and a screwdriver to press-fit to the inside of the door.
The hinge is available in two finishes: bright chrome and matt chrome, both ideal for combining with different styles of furniture.
The following video shows how such a system is easily assembled:
The following video shows how to assemble such a box in a simple way:
This magnetic lock has a holding force of 3.2 kg, ensuring that the door remains securely closed.
The magnet is screwed to the surface of the cabinet. The magnet is placed inside the cabinet and the metal plate on the door.
It is ideal for furniture with hinged doors in kitchens, bathrooms, wardrobes and other interior furniture where a secure and discreet closure is required.
It is made of steel and plastic with a white finish, which gives it strength and aesthetic integration into different types of furniture.
Yes, each lot includes 20 magnetic closures and 20 metal plates for installation.
The hinges are designed for glass doors with a thickness between 4 mm and 5 mm, ensuring a secure fit by means of a pressure screw.
Installation is done by fixing the hinge in the centre of the cabinet and tightening the glass with the included grub screw. No drilling of the glass is required.
They are made of zamak, a high-strength alloy, with a bright chrome finish for elegant aesthetics and durability.
Yes, the kit includes a right hand hinge and a left hand hinge, ensuring a complete assembly for the glass door.
No, this hinge model does not have a soft-close or damping system. It is recommended to use other accessories if this functionality is desired.
The following video shows how such a system is easily assembled:
The following video shows how such a system is easily assembled:
The following video shows how this system works:
The following video shows how this system works:
This supplement allows a precise adjustment of ±2 mm, which facilitates the alignment of the door without the need to dismantle the hinge.
The use of Ø 6.3 x 14 mm screws is recommended on surfaces with an entry hole of Ø 5 mm, ensuring a firm and secure fixing.
Manufactured from nickel-plated steel, the supplement increases the durability and stability of the X95 Euro hinge, reducing wear and improving load distribution.
This supplement is specifically designed for the X95 Euro series, optimising its performance and ensuring proper mounting.
Yes, it can be used in conjunction with other three-dimensional hinge adjustment solutions, provided they are compatible with the X95 Euro system.
The following video shows how this system works:
The following video shows how this system works:
The following video shows how this system works:
The following video shows how this system works:
The following video shows how this system works:
The following video shows how this system works:
The following video shows how such a system is easily assembled:
The X95 hinge allows +2 mm / -2 mm adjustments in height, side and depth, which facilitates precise alignment of the door in the cabinet.
The hinge cup has a diameter of 35 mm, with a drilling range of 3 to 7 mm to ensure a proper fit in the door.
This X95 hinge model has a spring in the closing direction, which ensures a safe and smooth closing of the door.
It is recommended to use Ø4x16 mm or Ø3.5x16 mm screws, depending on the door material and the desired fixing strength.
This hinge is mainly designed for wooden doors from 14 to 22 mm thick, but with specific adapters it can be used on doors with an aluminium profile.
Yes, although the use of two devices provides greater stability when opening. In addition, it is recommended to use two lifting systems on doors over 1 metre wide.
The following video shows how this system works:
The X12 super elbow hinge is designed for furniture where the door must fully retract into the furniture frame. In contrast, the X12 elbow hinge allows the door to partially overlap the side of the furniture.
The X12 super elbow hinge has a 26 mm diameter cup and an opening angle of 95°, providing convenient access to the furniture.
Snap-on (clip): SKU Model 1271607, facilitates quick installation without the need for additional tools.
Screw-on: SKU Model 1270507, for traditional screw installation.
Yes, this hinge allows three-dimensional adjustment, which facilitates perfect alignment of the door:
Height: ±2 mm
Depth: ±2 mm
Side: ±1 mm
It is recommended to install it on doors with a thickness between 12 and 18 mm, as a smaller or larger thickness could affect its correct functioning.
The height of the supplement affects the alignment of the door with the furniture:
Height -2 mm: Allows lower adjustment for doors that need alignment correction.
Height 0 mm: Maintains the standard hinge position with no change in height.
Height 2 mm: Slightly raises the hinge position, useful for alignment or levelling adjustments.
This supplement is compatible with wooden doors and other materials from 14 to 26 mm thick, in combination with X95 hinges.
The diameter of the screw determines the type of fastening and stability of the insert in the door. A diameter of 5x9.5 mm provides a firm and secure fixing, ensuring better resistance to loads and mechanical stresses.
Yes, it is specifically designed to work with X95 hinges, ensuring optimum installation with height adjustment and three-dimensional alignment.
The nickel-plated finish provides increased corrosion and wear resistance, ensuring greater durability in wet or frequently used environments.
This supplement allows a firmer and more secure attachment of X95 snap-on hinges, improving their stability and alignment on the door.
Yes, it is specifically designed to work with X95 snap-on hinges, ensuring easy and efficient installation.
The installation is carried out by means of a pressure system, without the need for additional screws, which allows a quick and safe assembly.
The nickel-plated finish improves corrosion and wear resistance, providing greater durability in heavy use or wet environments.
Yes, it optimises the functionality of the hinge by providing a more stable and secure base, preventing misalignment with prolonged use.
Partial pull-out allows the drawer to slide only part of the way out, while full pull-out allows full access to the inside of the drawer.
Brave slides can carry up to 20 kg of load, making them ideal for storage drawers in kitchens, bathrooms, offices and other frequently used furniture.
These slides are available in depths from 300 mm to 500 mm. The choice of the right size depends on the size of the furniture and the space required for the drawer.
The soft closing system incorporates a damping piston that reduces the speed of closing, avoiding sudden knocks and prolonging the useful life of the drawer and the cabinet.
No, it is necessary to choose the specific version for each side of the drawer, as there are models for installation on the left side and models for the right side.
These slides are 37 mm high and provide a smooth and stable glide and are made of zinc-plated steel for strength and durability.
They can hold up to 25 kg in weight, making them ideal for kitchen and office furniture requiring medium drawer loads.
They are available in lengths of 300 mm, 400 mm and 500 mm. The choice depends on the size of the drawer and the space available in the cabinet.
They are easily installed with screws and feature 5.2 mm diameter holes, plus elongated 4.5 x 10 mm holes to facilitate fixing adjustments.
They are compatible with most standard drawers, but it is important to check the height and mounting space to ensure correct installation.
The quick click system allows for quick and easy installation without the need for additional tools, making it easier to assemble and disassemble the drawer in case of maintenance.
These slides are ideal for kitchen, bathroom and office furniture where drawers with soft closing, stable sliding and easy access without the need for full-extension are required.
Slippe slides allow a vertical adjustment of ±4.5 mm, which facilitates the alignment of the drawer and ensures a precise fit, especially useful in furniture with multiple drawers.
They are made of steel with a zinc-plated finish, which provides high corrosion resistance and long-lasting sliding, as well as incorporating delrin rollers for a smoother movement.
Yes, these slides can be installed in drawers with different panel thicknesses, provided that the recommended dimensions for fixing and correct alignment of the locking mechanism are respected.
These slides feature full-extension, ball bearings and a load capacity of up to 35 kg, making them perfect for kitchen, office and storage drawers where strength and full access to contents is required.
The soft-close system uses a damping piston in both slides to reduce the impact when closing the drawer, avoiding sudden knocks and extending the life of the unit.
They can support up to 35 kg per slide set and are therefore recommended for heavy duty furniture such as kitchens, filing cabinets and heavy storage furniture.
The zinc plated steel finish offers corrosion resistance and a shiny metallic appearance, while the black painted finish provides a modern, understated aesthetic with an extra layer of protection against wear and tear.
To dismantle the drawer, the trigger system located on the runners must be activated, allowing the drawer to be released from the cabinet structure quickly and without the need for tools.
The Vantage-Q drawer kit supports a load capacity of up to 40 kg. The slides are designed with a push system for smooth and silent opening, ensuring a smooth glide.
The drawer ribs are equipped with staples designed to be fixed to the bottom of the drawer by machine, ensuring precision and robustness in assembly. They are compatible with any module width.
The drawer allows a vertical adjustment of ±2 mm and a horizontal adjustment of ±1.5 mm in the front fixing, facilitating precise adjustments for a perfect installation.
The materials used in the kit include epoxy painted steel, finished in white (RAL 9003) and grey (RAL 9006). These materials offer high resistance to wear and an excellent aesthetic finish.
The product code includes all the elements required for the assembly of an 83 mm high external drawer: runners, ribs, rear hooking set and a front hooking set for the external drawer. For complete installation, no additional components are required.
Vantage-Q slides incorporate a soft-close system that minimises resistance to use and provides a smooth, quiet glide, improving drawer comfort and durability.
These slides can carry loads of up to 35 kg, making them ideal for kitchen, bathroom and storage furniture that requires reliable sliding under medium loads.
They are available in depths of 270 mm, 300 mm, 350 mm, 400 mm and 450 mm, allowing them to be adapted to different drawer sizes according to the user's needs.
They are made of steel with a bright zinc-plated finish, which ensures high corrosion resistance and a modern aesthetic appearance. The material provides a long service life even in heavy-duty environments.
Installation is carried out by fixing the slides to the cabinet and the drawer with screws. It is important to make sure that both slides are level and aligned to ensure smooth sliding and to avoid misalignment of the lock.
The Concept slide has a load capacity of up to 30 kg, making it ideal for medium to large drawers in kitchen, bathroom and general storage furniture.
It incorporates a soft-close system that reduces the impact when closing the drawer, providing a smooth and silent movement, which improves the user experience and prolongs the life of the mechanism.
It is available in depths of 350 mm and 500 mm. The choice depends on the size of the drawer and the space available in the cabinet where it will be installed.
The guide is made of steel with a zinc-plated finish, which guarantees a high resistance to corrosion and wear, ensuring a long service life even in heavy-duty environments.
It is installed on the left side of the drawer with screws. The drawer rib is placed on top of the slide to allow sliding. No specialised tools are required for assembly, but it is essential to align the slide correctly to ensure optimum sliding.
The kit includes full-extension slides with soft close, a set of ribs, a set of front hooks for the outer drawer, screws and assembly instructions.
The drawer has a load capacity of up to 50 kg. Its slides have a full-extension and soft-close system, allowing for smooth and silent sliding.
The mounting system allows eccentric adjustment of the front panel with an adjustment of ±2 mm vertically and ±1 mm horizontally, which facilitates precise alignment.
It is available in white and anthracite grey painted finishes. Its components are made from steel, which guarantees strength and durability.
To complete the assembly, it is only necessary to have the boards cut to the correct size for the bottom, back and border of the drawer.
The set of side rails improves storage in the drawers, allowing objects to be placed in an organised manner and preventing them from shifting during use.
These rails are available in depths of 270 mm (SKU 3015725) and 300 mm (SKU 3015825). The choice depends on the size of the drawer and compatibility with the drawer structure.
They are made of plastic and aluminium, with a metallised aluminium finish. These materials offer a combination of strength, lightness and modern aesthetics.
For their installation, it is necessary to have the specific rear and front brackets that allow them to be correctly fixed to the structure of the box.
These rails are designed for Vantage-Q drawers and are available in different lengths (from 270 mm to 500 mm) to suit different drawer depths.
The actuator allows Ultrabox drawers to close smoothly and shock-free, thanks to its shock absorbing piston that reduces the impact at the end of the stroke.
It is compatible with Ultrabox drawers and T30 castor slides, in lengths from 250 mm to 800 mm, ensuring wide compatibility with different drawer sizes.
It is installed easily and without additional labour, being fixed with one device on each side of the cabinet and one actuator on each side of the drawer. We recommend the use of screws Ø3.5 x 12 mm for the actuator and Ø3.5 x 20 mm for the device (not included).
It is made of high quality plastic, which provides lightness, resistance and an installation without risk of corrosion or deterioration due to continuous use.
Yes, several actuators can be installed in the same drawer if the soft closing effect is to be reinforced in larger furniture or furniture with a heavier load.
The kit includes a set of synchronised full-extension slides, a set of ribs, a set of front hooks and screws for mounting the drawer.
The 3D adjustment allows the drawer to be adjusted in three axes: vertically by means of an eccentric (±2 mm), horizontally (±1 mm) and inclination (+1.5/-4 mm), which facilitates precise and aligned installation.
This drawer supports up to 40 kg of load. Its slides have a damped closing system and total synchronisation, ensuring a smooth and silent movement.
It is available in depths of 270 mm, 300 mm, 350 mm, 400 mm, 450 mm, 500 mm and 550 mm, with finishes in white painted, aluminium painted and anthracite grey.
The cabinet must have a board thickness of 16 mm for the bottom and back of the drawer, ensuring a safe installation and a perfect fit of the adjustment system.
This 131 mm high model offers more storage capacity compared to lower versions, without compromising the accessibility and stability of the drawer.
The 3D adjustment allows the drawer front to be adjusted in three directions: ±2 mm vertically by means of an eccentric, ±1 mm horizontally and inclination of +1.5/-4 mm, ensuring precise adjustment.
It is available in depths of 270 mm, 300 mm, 350 mm, 400 mm, 450 mm, 500 mm and 550 mm, with finishes in white painted, aluminium painted and anthracite grey.
The drawer supports up to 40 kg load thanks to its synchronised full-extension slides with cushioned closing, which ensure smooth, shock-free movement.
The cabinet must have a board thickness of 16 mm at the bottom and back of the drawer to ensure a stable installation and optimal adjustment of the adjustment system.
The 178 mm Vertex drawer offers greater storage capacity, allowing larger items to be stored without compromising accessibility or the stability of the unit.
The 3D adjustment allows precise adjustment of the drawer front in three directions: ±2 mm vertically by means of an eccentric, ±1 mm horizontally and an inclination of +1.5/-4 mm, facilitating perfect alignment.
It is available in depths of 350 mm, 400 mm, 450 mm, 500 mm and 550 mm, with finishes in white painted, aluminium painted and anthracite grey.
This drawer supports up to 40 kg load and features synchronised full-extension slides with soft closing, guaranteeing smooth and silent sliding.
The cabinet must have a board thickness of 16 mm at the bottom and back of the drawer to ensure stable installation and precise adjustment of the adjustment system.
What types of light fittings can the Revosens control and at what voltage does it operate?
What functions does its integrated LCD screen offer and how are the modes managed?
What connectivity and remote control options does it offer?
How many transmitters or receivers can be linked to the system?
What is the signal range of the RF system and how is it installed?
What type of controller is needed to adjust the colour temperature?
Can the strip be cut to size and how is this done?
What power and luminous flux does it offer?
What is the adjustable colour temperature range?
What type of adhesive is included for installation?
Does the Lynx LED strip with colour temperature change require a controller to be able to use it?
What is the recommended procedure for installing the sensor in different types of furniture?
What is the maximum power the sensor can handle and how many lights can it control?
What are the characteristics of the sensor's motion detection?
Does it comply with any electromagnetic compatibility or safety regulations?
What type of connections and materials does the sensor include?
How is the LED strip properly installed on different types of surfaces?
What advantages does SOB technology offer over conventional LED strips?
How does it perform in terms of energy efficiency and luminous flux?
What protection does it offer against environmental conditions?
Can the MiniSOB strip be cut?
What kind of cutting and customisation does the SOB Freecut LED strip allow?
What is the connection compatibility and what advantages does the Lynx-Z Miniled system offer?
What makes this strip different from others in terms of light uniformity?
What performance does it offer in terms of light and energy?
What are its installation and environmental resistance characteristics?
Can the SOB Free-cut strip be cut?
The converter has an ultra-slim profile of just 17 mm, making it ideal for installations in confined or hidden spaces. It should be installed on solid, non-flammable surfaces, ensuring proper ventilation to avoid heat build-up. Avoid humid areas or those exposed to extreme temperatures.
This model includes two control ports. One is used to connect SMART sensors, centralising the on/off function of connected luminaires. The second port allows the synchronisation of up to 5 additional converters, enabling control of a large lighting system from a single sensor, improving system efficiency and simplicity.
The converter is made with a Class II polycarbonate housing that provides reinforced insulation. It includes internal protection against overheating and short circuits. It complies with multiple international certifications such as UL, ENEC, CE, UKCA, CB, RCMCOC and SAA, ensuring safety across different regulations and markets.
It is compatible with SMART sensors designed for 12V DC luminaires. It removes the power limitations found in standard sensors, supporting loads of up to 72W. Sensors can be installed directly into any of the 6 MINILED outputs, making it easy to design versatile installations.
Includes 6 MINILED outputs, 1 high-power output (up to 7.2A), 2 control ports, 1 sensor adapter cable, 1 interconnection cable for converter synchronisation, and 1 two-metre power cable with 90° angled type C plug and IEC 60320 C7 connector. The entire set is optimised for fast Plug&Play integration.
Yes, the drawer measurements, including its dimensions and machining, are fully compatible. The board cutting measurements, mounting dimensions and placement of the drawer in the module are exactly the same.This allows customers to mount 30 kg Concept slides and 50 kg slides on the same drawer.
The square rail section of the Slim drawer measures 23 mm by 13 mm and the section with trim measures 25 mm by 15 mm.
Yes, the bottom and the back of the Slim drawer have the same measurements for both the soft closing runners and the push runners.
The minimum unit depth required to install a Slim exterior drawer with push is calculated with the formula: Minimum depth = Depth + 3 mm. In this case the minimum unit depth needed will be 500 + 3 = 503 mm.
The minimum unit depth required to install a Slim interior drawer with push is calculated with the formula: Min. depth = Depth + 12 mm. In this case the minimum unit depth needed will be 500 + 12 = 512 mm.
It is recommended to mount the guide rail synchroniser with push for the Slim drawer on units with a width of more than 600 mm.
It is recommended to mount the guide rail synchroniser with push for the Slim drawer on units with a width of maximum than 1,200 mm.
No, each drawer has a synchroniser accessory.
The following video shows how you can easily assemble the Vantage-Q drawer.
Yes, the bottom and the back of the Vantage-Q drawer have the same measurements for both the soft closing runners and the push runners.
The minimum unit depth required to install a Vantage-Q exterior drawer with push is calculated with the formula: Minimum depth = Depth + 38 mm. In this case the minimum unit depth needed will be 500 + 38 = 538 mm.
The minimum unit depth required to install a Vantage-Q interior drawer with push is calculated with the formula: Min. depth = Depth + 44 mm. In this case the minimum unit depth needed will be 500 + 44 = 544 mm.
It is recommended to mount the guide rail synchroniser with push for the Vantage-Q drawer on units with a width of more than 600 mm.
It is recommended to mount the guide rail synchroniser with push for the Vantage-Q drawer on units with a width of maximum than 1,200 mm.
In order to plan the design of a kitchen drawer unit with Vantage-Q drawers, we need to bear in mind several parameters, this work is made easier with a help table to configure those units.This calculation table makes it possible to calculate the position of the guides, depending on the dimensions of the unit and the number of drawers.Also, it makes it possible to choose different heights of drawer, consequently it calculates the height of the façade of each of them within the same unit.
In order to plan the design of a kitchen drawer unit with Vantage-Q drawers, we need to bear in mind several parameters, this work is made easier with a help table to configure those units.This calculation table makes it possible to calculate the position of the guides, depending on the dimensions of the unit and the number of drawers.Also, it makes it possible to choose different heights of drawer, consequently it calculates the height of the façade of each of them within the same unit.
We have different heights of sides and accessories that make it possible to create different types of drawers.You can design inner and exterior drawers, with a large capacity for saucepans, with rounded or square rails, with inside accessories and even glass sides.
