Frequently asked questions
We have a table for calculating the weight of a door, which is necessary to know when choosing guy ropes and measurements.Depending on the material of the door, as well as its dimensions, the result will be the weight of the door (kg) that you can use to calculate to the necessary strength of the measure (Kg x cm).
Yes, the drawer measurements, including its dimensions and machining, are fully compatible.This allows customers to mount the Silver partial pull-out slides with push to open function and the Silver soft-close partial pull-out slides on the same drawer.However, they are not compatible with the Slippe partial pull-out slides with push to open function.
The locking pivots that are mounted on the Silver guide rails are designed in order to easily fasten the drawers to the guide rails, thus preventing them from falling during transportation or handling.These pivots avoid the use of additional screws and for their assembly you only need a small hole in the side of the drawer. In this manner the drawer can be assembled and disassembled as many times as you wish.
This set of hooks is compatible with interior drawers of height 178 mm of the Vertex system.
The hooks are made of high quality plastic, offering durability, resistance to continuous use and ease of cleaning.
Installation is carried out by screwing the hooks on each side of the front panel of the drawer, ensuring a secure and stable fit.
Yes, the latches are designed to keep the front panel fixed and stable for long periods, even with frequent use.
These attachments are specifically designed for the Vertex system, ensuring perfect compatibility with its 178 mm high panels.
These slides are compatible with drawer depths of 240 mm, 290 mm, 340 mm, 390 mm, 440 mm and 490 mm, depending on the model selected.
The push system allows the drawer to eject automatically when pressure is applied to the front of the drawer, eliminating the need for handles.
These guides offer a vertical adjustment range of ±5 mm for precise adjustment.
The locking pivot ensures that the drawer does not unintentionally dismount from the slide and maintains its stability.
These slides have a maximum load capacity of 25 kg.
The diameter of hole that is used for the euro screws is 5 mm, as prior drilling is required to assemble those screws.
The Point Motion Simple LED sensor detects the movement of a human body within its range and automatically switches on the connected LED lights. Once no motion is detected, the timer switches the lights off after 45 seconds.
It has a detection range of up to 1.5 metres and a 90° angle of coverage, making it ideal for applications in cabinets, drawers or any space where automatic illumination is required when motion is detected.
The built-in timer switches the lights off after 45 seconds without detecting motion, improving energy efficiency and reducing power consumption in environments with intermittent use.
The package includes 1 sensor, a 6-input AMP distributor, AMP connectors and fixing screws. Installation can be surface or flush mounted, depending on the needs of the furniture or space.
The sensor operates with 12V DC (36 W) and 24V DC (72 W) LED luminaires. This makes it compatible with a wide range of LED lighting systems, adapting to various configurations and environments.
The sensor dims with a short press to switch the luminaires on/off and a long press to adjust the light level.
Installation requires a Ø12 mm drill hole in the furniture. Includes a 1.5 m cable and a 6-input MiniLED distributor.
It supports 12V DC and 24V DC voltages, with maximum power ratings of 36W for 12V and 72W for 24V.
Yes, the sensor has a memory function that saves the last set intensity after switching it off.
It is ideal for panels, headboards and furniture in general, integrating perfectly in different rooms of the home.
The sensor requires an installation diameter of 14 mm to be recessed in the furniture.
Yes, it includes a blue LED light that makes it easy to locate the sensor in the dark.
12V DC or 24V DC luminaires can be connected, with maximum wattages of 36W (12V) and 72W (24V).
Dimming is activated by a short press to switch on/off and a long press to adjust the light level.
The sensor complies with IP44 protection measures and is designed for low power consumption, ensuring safety and efficiency.
The sensor is compatible with 8mm wide LED strips operating at 12V DC or 24V DC.
The control is done by a short press to switch on/off and a long press to adjust the light intensity level.
Yes, it includes a mechanical switch to turn the blue LED beacon on or off if you do not want it to be active.
The sensor is designed for 8 mm wide LED strips, ideal for integration into Lynx W profiles.
The integrated connector allows a fast, safe and efficient connection, facilitating the installation of LED strips.
The sensor automatically switches the light on when it detects movement of a human body within its detection range and switches it off after 30 seconds without detection.
Detects motion in a range adjusted to human movement, ideal for profile and furniture applications.
The light remains on for 30 seconds after motion detection ceases.
It is compatible with 8 mm wide LED strips for both 12V DC and 24V DC systems.
Includes a motion sensor, a MINILED distributor with 6 inputs, screws and a 1.5 m cable with Miniled connection.
The distributor cable allows up to 6 LED luminaires to be connected and managed simultaneously via a single 12V or 24V sensor.
It uses a Miniled connection, ideal for LED lighting systems compatible with this type of connection.
Yes, it is fully compatible with Miniled sensors operating on 12V DC and 24V DC.
The cable is 10 cm long, making it easy to connect several luminaires to a single sensor output.
The kit includes 1 distribution cable with 6 outlets and 1 inlet with Miniled connection, made of plastic with black finish.
Yes, the Crater light can be recharged with a mobile phone charger. The charger needs to have a type B micro USB connector and should at least supply 5V DC.The charging time will vary in accordance with the amperage of the charger, although it is recommended to use 5VDC 1A chargers, therefore the estimated charge time is 2 to 2.5 hours.
The Style 10 handle has the following dimensions: 42 mm wide, 28 mm high and a length of 2.35 metres. It is made of matt anodised aluminium, which gives it lightness, strength and a highly durable aesthetic finish.
This model is specifically designed for 10 mm thick sliding doors. It is compatible with built-in or sliding wardrobe systems using similar profiles.
Installation requires basic tools such as an aluminium cut-off saw (in case of length adjustments), a drill for fastening, and a screwdriver or equivalent tool for assembly with appropriate hardware. Be sure to follow the instructions for the Placard sliding system for precise adjustment.
Yes, the handle can be cut to size using specialised aluminium tools, such as thin-cutting saws. Careful cutting is recommended to keep the edges smooth and to avoid damage to the anodised finish. Be sure to measure accurately before fitting.
The RAL of the white gloss finish on the rails and handles of the Placard sliding door system is approximately 9003. The RAL of the anthracite grey finish is approximately 7043. The RAL of the black finish is approximately 9011.
The following video shows how you can easily install the aforementioned LED lighting.
The following video shows how you can easily install the aforementioned LED lighting.
The system is compatible with doors up to 20 kg and 25 kg, with adjustable heights between 1200 mm and 2200 mm. The load capacity varies depending on the model selected (Push or Pull).
It is necessary to combine this kit with the push or pull system, vertical profiles, sliding rails and optional reinforcement or centring profiles to ensure a complete and functional assembly.
Yes, the system allows the doors to be concealed in lateral spaces of the unit or between walls, optimising the use of space and maintaining a clean and elegant aesthetic.
The system includes cup hinges with and without soft closing, glides, dampers and mounting hardware, ensuring smooth and quiet sliding.
Made of steel, aluminium and plastic, the system guarantees high durability, wear resistance and ease of installation thanks to pre-assembled components.
The PMA (Maximum Weight Allowance) of the Gola profile system finishes ensures stability and strength in kitchen furniture designed for standard use.
The Gola Top profile is installed by fitting and requires a 3 mm pre-milling of the board to fit perfectly. The manufacturer's instructions must also be followed to ensure correct fixing.
This profile is compatible with table tops with a thickness of 18 mm, ensuring perfect integration into modern kitchen furniture.
Yes, the design of the Gola Top Profile makes it ideal for kitchens with a minimalist style, thanks to its clean finish and unobtrusive integration into the furniture.
The bracket with expansion screw is designed to secure the mounting of the Gola profile to the furniture module, providing a safe and strong system.
The expansion screw allows the bracket to be firmly fixed to the profile and the module, ensuring a stable and reliable installation in different configurations.
Yes, this bracket is compatible with all Gola profile systems used in kitchen units and furniture.
The bracket is made of steel with a zinc-plated finish, ensuring durability and corrosion resistance.
The packaging includes 50 units of brackets with expansion screws, ready for installation in furniture projects.
The D.L. of the Optima cutlery tray finishes is of high quality, ensuring strength and durability for long-lasting use.
The Optima Vantage cutlery tray is available in sizes compatible with drawers 400 mm wide and 450 mm deep.
Yes, the Optima Vantage cutlery tray is made of durable plastic that has been treated to protect it from contact with moisture.
The design of the Optima Vantage cutlery tray allows for efficient organisation of kitchen utensils and tools, maximising the space available in the drawer.
To clean the Optima Vantage cutlery tray, simply use a damp cloth and mild detergent. It is recommended to dry it thoroughly after cleaning.
The Optima Vantage cutlery tray is compatible with drawers of standard module widths of 600 mm and 900 mm, with a depth of 500 mm and a board thickness of 16 mm.
Yes, the Optima Vantage cutlery tray can be easily trimmed to fit the specific dimensions of the drawer, providing a customised installation.
It is made of high-quality, hard-wearing grey plastic, designed for durability and ease of cleaning.
Yes, the material used in the cutlery tray is resistant to moisture and daily wear and tear, ensuring longevity in kitchen environments.
The cutlery tray design includes a precise fit to keep it stable inside the drawer, preventing movement during use.
The following video shows how the sliding door system for wardrobes is assembled.
In order to secure the rails of the Space + sliding door system, it is recommendable to use 4 x 25 mm screws (code 5032505) for 16, 18 and 19 mm units.
The following video shows how the sliding door system for wardrobes is assembled.
The following video shows how the sliding door system for wardrobes is assembled.
The RAL number of the white finish on the rails and handles of the Placard sliding door system is approximately 9003.
The RAL code of the anthracite grey finish is approximately 7043.
The RAL code of the black finish is approximately 9011.
The Neco trolley system is designed for panel thicknesses up to 23 mm, allowing precise and safe assembly in both 2 and 3 sliding door configurations.
The kit includes a "slow" damped closing system that ensures smooth, quiet and safe closing of the doors, improving the user experience and the durability of the furniture.
Yes. The system is adjustable in height, which makes it possible to correct unevenness or small deviations in the assembly without the need to dismantle the whole assembly.
The trolleys are made of steel and high-strength technical plastic, which guarantees a long service life even in heavy-duty installations. The robust design supports stable and precise operation.
2-door kit (SKU 6023210) includes hardware for 1 interior and 1 exterior. The 3-door kit (SKU 6023220) includes hardware for 2 interior and 1 exterior. Both are supplied with hardware and all necessary components.
This system acts as a closing damper for sliding doors, reducing the impact at the end of the run and ensuring a smooth and controlled movement without bouncing or sudden bumps. Ideal for protecting both the doors and the cabinet structure.
It is designed to integrate with Emuca's Space system overhead trolley system. It attaches easily to the mechanism without the need for additional machining.
The kit is optimised for doors up to 50 kg per door leaf. If a higher capacity is required, the reinforced version for 85 kg should be chosen.
No. The design of the brake allows it to be activated by the natural movement of the door, so it is not necessary to place the door in a specific area for the brake to act correctly.
The packaging includes 4 parts (2 activation brakes + 2 anchor brakes) and is prepared for 2 sliding doors. The system is also available in versions for 3 doors and different load ranges (25, 50 and 85 kg).
The system includes carriages with ±3 mm height adjustment by means of eccentric screws. This feature facilitates the alignment of the doors after installation, improving the final aesthetics and making it possible to compensate for irregularities in the furniture or floor.
The kit is compatible with doors up to 23 mm thick. It is ideal for standard melamine or solid wood panels, provided that the specified thickness limit is respected to ensure correct operation of the system.
Each trolley is designed to carry a load of up to 50 kg combined, ensuring smooth and safe movement in medium-duty residential or contract applications. It is essential to use both trolleys per door to distribute the weight correctly.
The trolleys are made of steel and high-strength technical plastic. This combination ensures a robust structure with durable sliding components, ideal for continuous use without loss of performance over time.
The kit includes the necessary components to assemble 2 or 3 sliding doors (depending on the reference): upper and lower carriages, stops, guides, fixings and screws. Everything is supplied in a single package, which facilitates logistics and reduces errors on site.
This track is specifically designed to be fixed to the ceiling of the enclosure from below, acting as a top guide without the need for complex machining. Its design allows clean integration into tall modules, offering greater stability in folding doors without encroaching on usable space.
It is recommended to use Ø3.5x15 mm countersunk screws, evenly distributed along the rail. It is important to fix the profile on a solid board surface or internal reinforcements, avoiding areas with pre-drilled holes that could weaken the anchorage.
Yes, thanks to its straight profile and ceiling mounting, it allows the integration of LED strips on the sides of the enclosure without interference. It can also be combined with automatic opening sensors to activate the lighting when the folding doors are unfolded.
The matt anodising provides greater resistance to corrosion and friction wear, maintaining a professional aesthetic even with intensive use. It is ideal for furniture in demanding environments such as kitchens, offices or contract projects where durability is key.
Yes, the profile can be cut with suitable tools such as a mitre saw with an aluminium disc. After cutting, it is recommended to remove burrs to protect the wheels of the Twofold system and to maintain a smooth, blockage-free glide.
It is recommended to use a Ø5 mm drill bit to ensure precise insertion of the Euro screw. The drill hole should have a minimum depth of 11 mm and should be drilled to tight tolerances to avoid looseness or breakage of the material.
This screw is optimised for wood-based materials such as chipboard, MDF or melamine. Its design allows for strong fastening without the need for metal inserts, making it ideal for quick assembly of demountable furniture.
Emuca Euro screws are manufactured to DIN standards and meet TSCA Title VI assembly system strength requirements, offering maximum compatibility with modular structures in kitchen and office furniture.
The ideal torque for this screw is between 3.5 and 4 Nm. It is recommended to use torque-controlled screwdrivers to avoid head deformation or damage to the fastening material, especially in low-density boards.
The zinc plated finish provides superior corrosion protection and improves screw adhesion in porous materials. It is ideal for applications in humid environments or furniture that require a long service life without surface rust.
The double bolt allows for solid joints between pieces of furniture, especially in configurations that require simultaneous vertical and horizontal fastening, optimising the assembly and structural strength of the module.
Its design allows for a more even load distribution, improves joint stability and reduces the number of parts required when joining two components with a single element.
The bolt has an overall length of 62 mm and a diameter of 6 mm. Each end incorporates holes for 6 mm bolts and an end housing for 10 mm head bolts.
It is made of steel with a zinc-plated finish, which provides high resistance to oxidation, ideal for humid environments or industrial applications with high mechanical demands.
The product is delivered in packs of 1000 units, facilitating its management and replacement for manufacturers, industrial carpenters and furniture distributors.
The following video shows how you can easily assemble the abovementioned storage system in a kitchen.
The RAL code of the white finish of the Optima cutlery holder is approximately 9003.
The RAL code of the grey finish of the Optima cutlery holder is approximately 7001.
The RAL code of the anthracite grey finish of the Optima cutlery holder is approximately 7043.
The RAL code of the white finish of the profiles system Gola is approximately 9003.The RAL code of the anthracite grey finish of the the profiles system Gola is approximately 7043.The RAL code of the black finish is approximately 9011.
The following video shows how you can easily assemble the profile system Gola.
The Luna press stud features an 8.3 mm long installation head, which is specifically designed to fit precisely into the cup system of the same model. Its stamped steel construction guarantees high resistance to frequent mechanical stress.
This bolt employs a pressure system that allows quick installation without complex tools, ideal for heavy-duty industrial processes. The thread design, with a depth of 10.3 mm, ensures a firm and durable anchorage in the board.
The zinc plated finish acts as an effective barrier against rust, improving the performance of the bolt in humid environments or demanding conditions. This results in increased durability of the installed assembly, especially in kitchen or bathroom cabinets.
This bolt is optimised for cup assembly in cabinets and is compatible with Luna systems. Its simple installation makes it an efficient choice for automated or semi-automated assembly lines in the professional furniture sector.
The Luna press stud for coupling is supplied in packs of 2,500 units, facilitating its integration in industrial processes with a high assembly turnover. This bulk presentation allows optimising supply and reducing replenishment times.
The following video shows how you can easily assemble the Vertex inner drawer.
The maximum dimensions per door are 2400 high and 500 wide (per door leaf).
The Twofold system offers the versatility of sliding well when assembled with and without a lower guide. Whether it is used depends on the type of wardrobe in which the system is mounted.
To install the Miniluna cup correctly, it is necessary to drill a 15 mm diameter and 6 mm deep hole in one of the boards. In addition, a 15 mm x 6 mm arm must be used, which is inserted into the edge of the other board.
This system allows a clean and firm joint between two boards, functioning as a hidden support. Thanks to its design, the joint is practically imperceptible, ideal for applications where aesthetics is a priority.
The Miniluna cup is attached to pre-installed pins by means of a press fit. It is recommended to use bolts compatible with 15 mm diameter cups to ensure a perfect fit on 13 mm thick boards.
It is made of high-strength grey plastic, which makes it durable, lightweight and easy to assemble. Its finish provides stability to the joint, even in furniture that requires frequent assembly and disassembly.
The Miniluna cup measures 15 mm in diameter and 18 mm in length and is compatible with 13 mm thick boards. It is ideal for joining applications in home and office furniture where a compact and effective fixing solution is required.
The following video shows how the sliding door system for wardrobes is assembled.
It depends on the type of front panel you use for the interior drawer:- Aluminium front. This is fitted onto guides at the usual distance, 37 mm in the 4th hole of the guide.- Particle board front. The thickness of this board must be added to the 37 mm of the 4th hole of the guide.In other words, if the front is 19 mm thick, the guide must be fastened at 37 + 19 = 56 mm at the 4th hole of the guide.
The following video shows how you can easily install the Zero system.
For proper installation, the module must have a minimum width of 900 mm, a door of 450 mm and a minimum internal depth of 490 mm. The internal height of the module must be between 620 mm and 780 mm.
This model is available in left or right hand versions and can be mounted with either a 90° arm hinge or a straight hinge. It also incorporates a soft-close system for quiet and safe sliding.
The system consists of 2 independent trays with chrome-plated round rod, each with a load capacity of 20 kg, for a total of 40 kg per complete system.
The trays have an adjustment system that allows them to be easily adjusted in height, adapting them to the end user's organisational needs.
The corner mechanism is made of chrome-plated steel and the base of the trays is made of white melamine, which offers strength and durability in kitchen environments.
The included bar has a length of 1,003 mm, which allows exact compensation for the tension-free fitting between profiles. This measurement already provides for the necessary clearance to fit the brackets and to avoid friction or lateral pressure.
Each shelf, correctly installed, can support more than 100 kg per module, provided that the load is evenly distributed and the boards are of adequate thickness and density.
Fixing is carried out directly on the Zero profile using screws Ø3.5x16 mm, included in the kit. No special tools are required, and there is no need to drill the profile, which speeds up assembly and protects the structure.
Yes, the system allows readjustment without disassembly of the assembly. The brackets can be moved to another height or section within the profile, allowing a dynamic and adaptable configuration to design changes or end customer needs.
Although it is optimised for wooden boards or derivatives, it can also be adapted to melamine, compact or even metallised panels, provided that they allow secure screwing. The bar is compatible with standard hangers and can be integrated into mixed-use projects (textile + storage).
Includes:
2 profiles of 2,900 mm
4 rectangular levellers
4 cover caps
4 protective felts
8 dowels Ø6x30 mm
Mounting screws
1 adjusting tool
It is designed for floor-to-ceiling fixing, with simple installation. Suitable for openings up to 3,010 mm ± 20 mm.
Each shelf or module can support more than 100 kg, making it ideal for robust, heavy-duty solutions.
No, the system allows the position of the shelves to be adjusted without dismantling any element and without special tools, thanks to its design and the adjustment tool included.
The profiles are made of aluminium and the fixing accessories are made of zamak. The finish is textured black RAL 9005, suitable for demanding and decorative environments.
The shelf is designed for mounting with a maximum gap of 1.081 metres between two Zero profiles, and its effective length is 1.07 m.
According to UNE EN 16122:2013, the shelf can support up to 100 kg of evenly distributed load.
Kit includes: 2 shelf profiles 1.07 m, 1 Lynx-W profile 1.07 m, 2 shelf supports, 2 ribs to form the shelf, 2 system locking brackets, 2 M4x12 screws, 8 aluminium threaded screws Ø3.5x19 black and 4 plastic caps.
Yes, it includes a Lynx-W profile ready to add an LED diffuser of the same size or can be used as a decorative cover if you do not wish to install lighting.
The kit includes system locking brackets that prevent the shelf from unintentionally moving up or down once installed.
The system allows a tilt adjustment of up to 120°, with 5 possible levels: 12°, 24°, 36°, 48° and 60°, in both directions.
The kit includes 2 shelf supports, 2 hooks, 4 wood screws Ø3,5x16 mm and 4 plastic caps.
No, the system is supplied without wooden shelf, only the mounting accessories are included.
The brackets are made of steel and zamak with a stone grey (RAL 7048) or textured black painted finish, depending on the model.
The tilt is adjusted by means of a knurled bolt included in the bracket, allowing the desired angle to be set precisely.
The system is suitable for installation in openings up to 3,140 mm ± 20 mm when fixed directly between floor and ceiling.
Including 2 profiles of 2900 mm, 4 circular levellers, 4 cover caps, 4 protective felts, 8 dowels of Ø6 mm, 8 mounting screws and 1 adjusting tool.
The profiles are made of aluminium and the connection and support accessories are made of zamak, with a textured stone grey painted finish (RAL 7048).
No, installation is simple and requires no special tools or dismantling of height adjustment elements.
The Zero system with floor-ceiling fixing allows a load capacity of more than 100 kg per shelf/module, thanks to its reinforced lashing mechanism.
Each set contains: 1 wall mounting, 1 leveller, 1 profile connector, 1 profile cover, 4 screws Ø4×30, 4 dowels Ø6×30, 4 screws Ø3,5×16 and the necessary accessories for installation.
It is designed for the "L" assembly of the Zero modular system, fixing the profile to both the floor and the wall.
The components are made of zamak with a textured stone grey finish (RAL 7048) and grey plastic.
No, the Zero system is characterised by assembly without the need for special tools or disassembly of components.
The system can support more than 100 kg per shelf or module, increasing the clamping force as weight is added.
The following video shows how such a system is easily assembled:
The following video shows how such a system is easily assembled:
This latch is designed to be screwed directly onto the inside of the module and is compatible with lifting pistons used on aluminium or wooden doors of the PLUS 7-8-10 series.
It is optimised for aluminium doors with standard thicknesses, ensuring a firm, distortion-free fixation on thick profiles compatible with lifting piston systems.
The hitch is designed to provide structural support and stability to the piston, allowing the use in furniture with vertical opening doors with pistons designed for loads depending on the model of piston used.
The coupling has elongated holes to allow for precise installation adjustments. The use of standard diameter self-tapping screws is recommended for fixing to aluminium or wood.
Made of nickel-plated steel, it offers high resistance to corrosion and wear. Its finish meets the corrosion protection standards used in the metal furniture industry.
It is designed for use with NSDX compasses with drop absorption, providing a firm and stable hold on wooden hinged doors.
It is installed on the inside of the module where the compass will be fixed, ensuring that the door is securely fastened without displacement or misalignment.
It is made of nickel-plated steel, which ensures corrosion resistance, durability and secure mounting without deformation with continuous use.
The use of screws is recommended to secure it firmly to the furniture structure, ensuring correct alignment with the NSDX compass.
Each pack contains 20 pieces with nickel-plated finish.
This supplement allows a firmer and more secure attachment of X95 snap-on hinges, improving their stability and alignment on the door.
Yes, it is specifically designed to work with X95 snap-on hinges, ensuring easy and efficient installation.
The installation is carried out by means of a pressure system, without the need for additional screws, which allows a quick and safe assembly.
The nickel-plated finish improves corrosion and wear resistance, providing greater durability in heavy use or wet environments.
Yes, it optimises the functionality of the hinge by providing a more stable and secure base, preventing misalignment with prolonged use.
Full-extension allows full access to the inside of the drawer, facilitating organisation and unobstructed space utilisation.
The push mechanism allows the drawer to be opened by simply pressing it, eliminating the need for handles and offering a cleaner and more functional design.
These slides can carry up to 30 kg of load, making them ideal for kitchen and office furniture where stability and strength are required.
They are available in lengths from 300 mm to 600 mm. The choice depends on the size of the drawer and the space available in the cabinet.
They are installed by means of screws fixed to the drawer and have a trigger that allows the slide to be removed for easy assembly and maintenance.
What types of light fittings can the Revosens control and at what voltage does it operate?
What functions does its integrated LCD screen offer and how are the modes managed?
What connectivity and remote control options does it offer?
How many transmitters or receivers can be linked to the system?
What is the signal range of the RF system and how is it installed?
What is the recommended procedure for installing the sensor in different types of furniture?
What is the maximum power the sensor can handle and how many lights can it control?
What are the characteristics of the sensor's motion detection?
Does it comply with any electromagnetic compatibility or safety regulations?
What type of connections and materials does the sensor include?
