Vertex with 3D regulation External drawer, height 93mm, 40kg, board thickness of 18mm, depth 450mm, Steel, Anthracite Grey

3204535 / 8432393323015
DepthPackagingFinishingSKU
3501 KIT
Anthracite grey
3213635 
4001 KIT
Anthracite grey
3213935 
4501 KIT
Anthracite grey
3204535 
5001 KIT
Anthracite grey
3214235 

Product features

  • Kit of fittings needed to assemble an exterior drawer with a height of 93 mm and depth of 450 mm, apart from the front, back and bottom.
  • Sized for a board thickness of 18 mm for the bottom and back of the drawer.
  • Synchronized total extraction runners, with soft closing and load capacity of 40 kg.
  • It has a 3D front adjustment: vertical by means of an eccentric of ±2 mm, horizontal ±1 mm, inclination -1,5/+4 mm..
  • Made of anthracite gray painted steel.

Components

1 pair of runners, 1 set of sides, 1 set of hooks for frontal drawer, screws

Vertex Kit for kitchen and bathroom drawer with all the necessary elements for its assembly. It is the optimal solution for your kitchen, bathroom or wardrobe furniture with an elegant design. Each kit is made up of all the elements necessary for mounting an external drawer of 93mm height, sized for a board thickness of 18mm for the bottom and back of the drawer. Includes: two sides, one set of soft-close runners, one set of covers and drawer front hooks. 

The metal sides are made of steel with anthracite painted finish and allow the drawer front to be adjusted a 3D front: vertical by means of an eccentric of ±2 mm, horizontal ±1 mm, inclination -1,5/+4 mm. The guides are total extraction with soft closing and allow a maximum load of 40 Kg for the drawer.

You will only need the boards cut to the correct dimensions for the bottom, the back and the front of the drawer.

Documentation

Frequently asked questions


The following video shows how to assemble such a box in a simple way:

At Emuca, we make it easy for you. Here you can download this Excel file that will help you configure your drawer unit step by step. Simply enter the module measurements (height, thickness, overlap, etc.) and specify how many drawers you want. This file allows you to:

  • Automatically calculate the machining dimensions of the drawer fronts (H1, H2, H3...) (mm).
  • Determine the height of each drawer front (mm).
  • And obtain the machining dimensions required to manufacture the drawer fronts (X, Y) (mm).

It also includes visual representations so you can check the result and avoid errors. Ideal for carpenters, designers or DIY enthusiasts who want a practical and accurate solution.

If a warning message appears when you open the Excel file, close the file. Right-click on the downloaded file and select Properties. At the bottom of the window, tick the box Unblock. Click Apply and then OK. You can now open the file.

Recently viewed

View All