Vertex with 3D regulation External drawer, height 131mm, 40kg, depth 350mm, Steel, White painted

3185312 / 8432393309002
DepthPackagingFinishingSKU
2701 KIT
White painted
3186812
3001 KIT
White painted
3187712
3501 KIT
White painted
3185312
4001 KIT
White painted
3187612
4501 KIT
White painted
3185412
5001 KIT
White painted
3185512
5501 KIT
White painted
3187012
3501 KIT
Silver painted
3185325
4001 KIT
Silver painted
3187625
4501 KIT
Silver painted
3185425
5001 KIT
Silver painted
3185525
2701 KIT
Anthracite grey
3186835
3001 KIT
Anthracite grey
3187735
3501 KIT
Anthracite grey
3185335
4001 KIT
Anthracite grey
3187635
4501 KIT
Anthracite grey
3185435
5001 KIT
Anthracite grey
3185535
5501 KIT
Anthracite grey
3187035

Product features

  • Kit of fittings needed to assemble an exterior drawer with a height of 131 mm and depth of 350 mm, apart from the front, back and bottom.
  • Sized for a board thickness of 16 mm for the bottom and back of the drawer.
  • Synchronized total extraction runners, with soft closing and load capacity of 40 kg.
  • It has a 3D front adjustment: vertical by means of an eccentric of ±2 mm, horizontal ±1 mm, inclination -1,5/+4 mm.
  • Made of white painted steel.

Components

1 pair of runners, 1 set of sides, 1 set of hooks for frontal drawer, screws

Vertex Kit for kitchen and bathroom drawer with all the necessary elements for its assembly. It is the optimal solution for your kitchen, bathroom or wardrobe furniture with an elegant design. Each kit is made up of all the elements necessary for mounting an external drawer of 131mm height, sized for a board thickness of 16mm for the bottom and back of the drawer. Includes: two sides, one set of soft-close runners, one set of covers and drawer front hooks. 

The metal sides are made of steel with anthracite painted finish and allow the drawer front to be adjusted a 3D front: vertical by means of an eccentric of ±2 mm, horizontal ±1 mm, inclination -1,5/+4 mm. The guides are total extraction with soft closing and allow a maximum load of 40 Kg for the drawer.

You will only need the boards cut to the correct dimensions for the bottom, the back and the front of the drawer.

Documentation