Frequently asked questions
Yes, the hinges and accessories come with Ø4x16 mm screws with the same titanium finish.
The eccentric adjustment allows precise adjustments to be made to the door position, ensuring exact alignment with the furniture. This is essential for furniture where tolerances must be kept to a minimum.
The snap-in installation system with integrated ramps eliminates the need for additional screws, facilitating fast and secure assembly. This simplifies the installer's work and ensures a firm hold.
The 10x11 mm diameter ensures compatibility with standard bore holes and a stable connection to the furniture board, providing suitable support for X91/X92 hinges.
This supplement is ideal for furniture such as kitchen and bathroom cabinets, where a precise fit and sturdy mounting is required on doors with high daily use.
The nickel-plated finish not only enhances the aesthetics of the insert, but also protects it against corrosion, increasing its lifespan and making it easier to clean in wet or high traffic environments.
The following video shows how you can easily assemble the Ultrabox drawer.
The 165° opening X91N supercross hinge allows the door to be completely recessed and flush with the edge of the furniture, optimising aesthetics and functionality in kitchen, bathroom and storage furniture.
The automatic mounting system allows the hinge to be attached to the supplement quickly and easily, eliminating the need for additional tools, reducing installation time and ensuring a stable fixing.
To install this hinge, it is necessary to consider a drilling range of 3 to 7 mm and to use 35 mm diameter cups. It is compatible with doors from 14 to 26 mm thick, covering most market standards.
The three-dimensional adjustment allows the height, side and depth of the door to be adjusted with great precision, ensuring a professional finish and correcting possible misalignments during assembly.
Made of nickel-plated or titanium-finished steel, the hinge is highly resistant to corrosion and wear, ensuring reliable performance even in wet or heavy-duty environments such as kitchens and bathrooms.
The RAL code of the white finish of the sides of the Ultrabox kitchen drawer is approximately 9001.The RAL code of the aluminium finish of the sides of the Ultrabox kitchen drawer is approximately 9022.
We have a table for calculating the weight of a door, which is necessary to know when choosing guy ropes and measurements.Depending on the material of the door, as well as its dimensions, the result will be the weight of the door (kg) that you can use to calculate to the necessary strength of the measure (Kg x cm).
The 165° opening allows full access to the cabinet, improving functionality in applications where it is necessary to maximise space, such as corner cabinets or large storage cabinets.
The joint use of hinges and shims ensures secure support, improves door alignment and facilitates installation, especially in projects requiring high precision and durability.
Precise installation requires drilling holes 35 mm in diameter and 3 to 7 mm deep in the cup, ensuring that the doors are between 14 and 26 mm thick, and using the included screws to securely attach the shims and hinges.
The depth adjustment allows fine adjustments to be made to the position of the doors, correcting misalignments and ensuring that closing is smooth and functional, even on furniture with uneven surfaces.
Nickel-plated steel not only protects against corrosion and wear, but also provides an aesthetic finish, essential for furniture in wet or heavy use environments such as kitchens and offices.
The following video shows how to assemble runners for Silver drawer.
The 90° angle allows optimised access to furniture located in blind corners, ensuring efficient door movement without interference with other furniture structures.
The eccentric adjustment allows precise adjustment of the depth, correcting misalignments in the installation and ensuring perfect alignment of the doors with the furniture frame.
To ensure optimum installation, holes should be drilled in the cup with a diameter of 35 mm, with a drilling range of 3 to 7 mm, ensuring compatibility with door thicknesses of 14 to 24 mm.
The automatic mounting system evenly distributes the loads on the hinge, improving its stability and reducing long-term wear and tear in projects with intensive use or frequent openings.
The nickel-plated or titanium finish provides superior corrosion and wear resistance, making the hinge ideal for kitchens and other environments where durability and professional aesthetics are required.
The following video shows how to adjust runners for Silver drawer.
Eccentric adjustment allows fine adjustments to be made to door alignment, improving accuracy in projects where minimum tolerances are critical to furniture design.
To ensure the stability of the supplement, the holes must have a diameter of 5 mm, a depth of 12 mm and a standard spacing of 32 mm between anchor points.
Euro screws provide a solid fixing design, ensuring a stable mounting that withstands dynamic loads without compromising the integrity of the system on heavy duty doors.
The 0-height allows for a standard installation that facilitates the precise alignment of the doors, ensuring that they fit perfectly into the furniture frame without the need for additional modifications.
The nickel-plated steel used in this supplement meets quality standards that guarantee corrosion resistance, durability in frequently used environments and professional aesthetics in technical furniture applications.
Yes, the drawer measures are the same in the Silver and Slippe with partial and/or total extension with clips.
No, the drawer measures are different between.
There is a blocking pin that is designed in order to be able to fasten the drawers to the hidden Slippe rails simply and affordably, thus avoiding them from falling during transport or handling. There are also two different models, one for total extraction rails and another longer model for partial extraction rails.With this pivot, you avoid the use of additional screws, and in order to assemble it you only need a small hole in the side wall of the drawer. In this manner the drawer can be assembled and disassembled as many times as you want.
This supplement offers an eccentric adjustment range of ±1.5 mm, allowing fine adjustment for precise alignment and optimised door closure in the cabinet.
It is compatible with X91, X92 and X91R hinges, but cannot be used with 90° arm hinges, which should be considered when selecting system components.
It is recommended to use the screws supplied with the supplement, which are specifically designed to ensure safe installation and prevent damage to the furniture material.
The concealed design of the supplement, being under the hinge arm, enhances the aesthetics of the cabinet and avoids interference with other components, maintaining a clean and professional appearance.
The nickel-plated or titanium finish provides increased resistance to corrosion and wear, which is ideal for applications in kitchens or bathrooms where exposure to moisture is frequent.
The supplement allows a height adjustment with a tolerance of ±1.5 mm, which facilitates a precise alignment of the doors, ensuring an optimal closing and an impeccable aesthetics of the furniture.
No, this supplement is not compatible with plastic hinge covers, as it is designed to work directly with X91, X92 and X91R hinges, optimising their integration and functionality.
For the correct installation, it is necessary to carry out a machining on the furniture with dimensions of Ø10 x 10 mm, ensuring a firm and stable fastening of the supplement to the module.
The design with concealed fixing under the hinge arm enhances the aesthetics of the furniture by eliminating visible elements, which is ideal for premium projects where attention to detail is essential.
The 10x10 mm diameter allows a more compact and specific installation in furniture modules, ensuring a secure fixing and avoiding interference with other internal components.
It is enough to use a single locking pin in order to fasten a drawer to the hidden Slippe rails. For assembly, you only require a small hole in the side of the drawer rack as indication in the catalogue´s machining diagrams. In this manner the drawer can be assembled and disassembled as many times as you want.
The hinge offers an opening angle of 155°, which allows full access to the inside of the module and avoids interference between the door and the furniture.
The clip system is installed by snapping the hinge onto the supplement quickly and without additional tools, simplifying the assembly process and facilitating disassembly.
The installation requires doors with a thickness of 16 to 24 mm and a pre-machined Ø35 mm for the cup, with a drilling distance of 3 to 7 mm from the edge.
The hinge allows three-dimensional adjustments: ±2 mm in depth and adjustment in height and horizontality, ensuring precise alignment after installation.
It is made of high quality nickel-plated steel, which ensures corrosion resistance, durability against continuous use and an aesthetic finish for any piece of furniture.
The following video shows how you can easily assemble a drawer with soft- closing and T30 drop runners.
The RAL code of the white finish of the rails for T30 drawers is approximately 9001. The RAL code of the black finish of the rails for T30 drawers is approximately 9005. The RAL code of the grey finish of the rails for T30 drawers is approximately 9022
Installation is by screwing into the sides of the Vertex drawer front panel, ensuring a firm and adjustable fixing.
The hooks are made of high quality plastic, which guarantees durability, resistance to daily use and structural stability.
The stability of the front panel is achieved thanks to the design of the latches, which provide a secure and stable fit, even under continuous load.
This product is specifically designed for 131 mm high drawers, so it is not compatible with other heights.
The white plastic is lightweight, moisture resistant and easy to clean, making it ideal for applications in domestic environments such as kitchens and bathrooms.
The included full-extension slides support a load capacity of up to 40 kg, with cushioned locking to ensure smooth sliding.
Yes, the bottom and back panels can be cut to fit non-standard dimensions, offering flexibility in assembly.
The kit is available in white and anthracite grey painted finishes, with matching table tops that combine design and functionality.
The side ribs allow adjustment of the drawer front by up to +2 mm vertically and +1 mm horizontally for perfect alignment.
The boards are made of particle board with a resistant melamine, which makes them more durable and resistant to moisture.
The full-extension slides support a maximum load of 40 kg, ensuring smooth sliding and soft closing.
The panels have a depth of 399 x 450 mm and a back panel of 376 x 63 mm. Yes, they can be trimmed to fit different module widths.
The side ribs allow adjustments of +2 mm vertically and +1 mm horizontally, achieving a perfect alignment of the drawer front.
This kit is available in white and anthracite grey painted finishes, with an elegant and functional design.
The boards are made of particle board and durable melamine, offering durability and protection against moisture.
The Vertex external drawer supports a maximum weight of 40 kg, thanks to its synchronised full-extension slide system and high-strength steel.
The board for the back and rear must be 16 mm thick to ensure proper installation.
The drawer front is adjustable up to ±2 mm vertically and ±1 mm horizontally, ensuring correct alignment.
Yes, the slide system includes a cushioned closure, which provides a smooth and quiet closure.
Kit includes: 1 set of slides, 1 set of ribs, 1 set of drawer front clips and screws. Front, back and bottom are not included and must be purchased separately.
The following video shows how you can easily assemble the Miniwinch system.
The Vertex 83 mm front attachment kit is compatible with 83 mm high front panels.
Installation is carried out by screwing the hooks to the sides of the front panel of the drawer, ensuring a firm and stable fixing.
The hooks are made of high quality plastic, which makes them strong, durable, easy to clean and aesthetically pleasing.
No, only screws, which are usually included in the kit, are needed for easy installation.
This system makes it possible to optimise the space inside the drawer, while maintaining a functional and aesthetic design in the storage modules.
This set of hooks is compatible with interior drawers of height 178 mm of the Vertex system.
The hooks are made of high quality plastic, offering durability, resistance to continuous use and ease of cleaning.
Installation is carried out by screwing the hooks on each side of the front panel of the drawer, ensuring a secure and stable fit.
Yes, the latches are designed to keep the front panel fixed and stable for long periods, even with frequent use.
These attachments are specifically designed for the Vertex system, ensuring perfect compatibility with its 178 mm high panels.
At Emuca we have two models of Circum cable grommets, a 60mm diameter and an 80 mm diameter. For large plugs it is advisable to use the Circum cable grommet with an 80 mm diameter.
The bottom and back of the drawer are dimensioned for a board thickness of 16 mm, guaranteeing robustness and stability.
The drawer slides have a maximum load capacity of 40 kg, ensuring optimum performance even in demanding applications.
Yes, the system allows adjustment of ±2 mm vertically and ±1 mm horizontally, achieving perfect alignment of the front panel.
The drawer is made of painted steel, which provides high wear resistance and long-lasting durability.
Yes, the anthracite grey finish is designed for corrosion resistance and excellent performance in daily use, meeting high quality standards.
The front profile for the Vertex internal drawer is attached to the system by means of a set of front connectors, which makes it easy to install and ensures a stable connection.
Painted aluminium provides a corrosion-resistant and easy-to-clean surface, which reduces maintenance costs and ensures a long service life of the profile.
Yes, the front profile can be installed on drawers with or without rails, depending on the user's needs and the drawer design.
No, the front profile does not include additional accessories for mounting. However, it must be combined with the specific front attachments depending on the height of the Vertex drawer.
The design and finish of the front profile allows for aesthetic and functional integration with other components of the Vertex system, achieving a uniform result in terms of appearance and functionality.
The guide is made of steel with a zinc-plated finish, which provides high resistance to corrosion and greater durability in demanding environments, such as kitchens or bathrooms.
This slide has a maximum load capacity of 40 kg, which makes it suitable for drawers that store heavy objects.
Yes, this slide is part of a system that includes versions compatible with depths of 350 mm, 450 mm and 500 mm, offering flexibility in use.
The soft-close feature avoids abrupt shocks when closing the drawer, which reduces wear and tear on parts and extends the life of the system, as well as improving the user experience.
Yes, this slide is compatible with full-extension systems, allowing full access to the inside of the drawer and better use of space.
Maximum load capacity: Silver slides have a load capacity of up to 30 kg, which makes them ideal for domestic drawers with a considerable load.
Available adjustments: The guides allow adjustment in three directions: vertical (+3 mm), horizontal (+1.5 mm) and in depth (+3 mm), facilitating precise installation and a perfect fit.
Smooth closing: The self-closing system and the damping piston integrated in both slides prevent sudden shocks, prolonging the life of the drawer and offering a silent and smooth closing.
Depth compatibility: These slides are available in a variety of sizes, including depths of 290, 340, 390, 440, 490, 540 and 590 mm, adapting to different design needs.
Durability of design: They are made of zinc-plated steel, which ensures corrosion resistance and high durability, even under intensive use.
Maximum supported weight: The slide supports a weight of up to 40 kg, even with synchronised full opening, which guarantees safe and functional use in drawers with heavy loads.
Alignment during installation: The slide includes standard drill holes for attachment to the side of the module and drawer. In addition, the use of marking templates is recommended to ensure accurate and aligned installation.
Benefits of the zinc plated finish: The zinc plated finish protects the slide against corrosion, increases its durability and improves its resistance to daily wear and tear, while maintaining a clean and uniform aesthetic appearance.
Adjustment mechanism: Yes, the slide incorporates an integrated adjustment system that allows corrections to be made to the vertical and horizontal alignment, improving accuracy after initial installation.
Difference between left and right-hand versions: The difference lies in the mounting position inside the module. The left-hand slide is installed on the left side of the drawer, while the right-hand version is designed for the opposite side, ensuring compatibility in pairs.
Maximum supported weight: These hooks are designed to support the weight of standard front panels on Vertex interior drawers, ensuring stability and functionality under normal domestic use.
Front panel stability: The design includes secure fixing points that immobilise the front panel to the hitch, preventing disengagement during prolonged use.
Screw compatibility: The couplings are compatible with standard screws for fastening into wood panels or derived materials with suitable thicknesses.
Tools required: No special tools are required; mounting is easily done with a standard screwdriver.
Material resistance: The plastic used in the couplings is of high quality, resistant to wear, impact and normal environmental conditions, but is not specifically designed to withstand high temperatures or aggressive chemicals.
This set of hooks is compatible with the Vertex and Concept drawer models.
Supports drawer heights of 178 mm and 185 mm, depending on the model selected.
It can be screwed or pressed directly onto the front of the drawer, adapting to different configurations.
The set includes 8 x 4x20 mm screws, which are needed to fix the parts to the drawer front and the side ribs.
Once installed, the hook is concealed within the side of the drawer, ensuring a clean, unobtrusive design without interfering with the overall aesthetics.
There are two options:
- Without using the rubber trim: remove the cover and the rubber trim, pass the cable through the through-hole and place the cover on again but without the rubber trim.
- Using the rubber trim: it is possible to make a small cut to the rubber with a cutter, in a way that makes it possible to insert the cable and thus be able to keep the rubber mounted on the cable grommet. (Recommended).
It has a height of 131 mm and a depth of 350 mm.
It uses a bolted attachment system.
Yes, it is compatible with applications in kitchen, office and other similar spaces.
It is made of steel, which ensures resistance to wear and tear and stability over time, as well as an anthracite grey finish that protects the surface.
The rib provides support and stability to the drawer structure, as well as a modern aesthetic design.
The Vertex outer box has a depth of 450 mm and a specific height of 93 mm.
The maximum load capacity of the drawer is 40 kg.
The front adjustment allows adjustments of ±2 mm vertically and ±1 mm horizontally for perfect alignment.
The sides are made of steel with an anthracite grey or white painted finish, depending on the model.
This drawer is compatible with 16 mm thick boards for both the bottom and the back of the drawer.
The Miniwinch folding door system can be installed in both wooden and aluminium doors.You only need to consider that it needs a door with A+10 where A is the side thickness of the furniture.For example, if the side thickness of the furniture is 19 mm, the door will be fitted at 29 mm.If the aluminium profile is 45 mm wide, it can be fitted because it can go inside the profile.We can also use the Ankor hinge in this combination, because it can fit easily.
The 93 mm high Vertex Push Sincro external drawer supports a maximum load capacity of 40 kg.
This model of drawer incorporates a synchronised total extraction system that guarantees a smooth and silent sliding.
The synchronising rod (code 3202261, not included in the kit) is necessary to assemble the drawer in widths greater than 600 mm.
The ribs are available in three heights: 93 mm, 131 mm and 178 mm, allowing them to be adapted to different design needs.
The eccentric adjustment of the front panel allows an adjustment of ±2 mm, facilitating the perfect alignment of the drawer.
The 131 mm high Vertex Push Sincro external drawer has a maximum load capacity of 40 kg.
This model incorporates a total synchronised extraction system that provides a smooth and silent glide.
It is recommended to use the synchronising rod (code 3202261, not included in the kit) for widths over 600 mm.
The eccentric adjustment of the front panel allows adjustments of ±2 mm vertically and ±1 mm horizontally, facilitating precise alignment.
Kit includes 1 set of slides, 1 set of ribs, 1 set of drawer front clips and screws.
The eccentric allows a drawer front adjustment range of ±2 mm vertically and ±1 mm horizontally.
The full-extension slides have a length of 450 mm, suitable for modules of this depth.
The available rib heights for this model are 93 mm, 131 mm and 178 mm.
Synchronised slides contribute to the smooth running of the drawer thanks to the ejector system when the drawer is pressed down, combined with a damping piston.
No special tools are required for the installation of this drawer; the components are designed for easy and intuitive assembly.
The diameter of hole that is used for the euro screws is 5 mm, as prior drilling is required to assemble those screws.
Silver L concealed slides are 340 mm deep and offer partial-extension, allowing efficient access to the drawer contents.
Silver L slides have a load capacity of 25 kg and are supplied in separate left and right hand versions.
These slides include an integrated locking pivot that prevents unintentional dismantling of the drawer, guaranteeing safety and stability.
They offer a vertical adjustment of +5 mm, which facilitates a precise adjustment of the drawer level in relation to the cabinet.
They are made of steel with a zinc plated finish, providing durability, corrosion resistance and a professional appearance.
The drawer must have a height of 93 mm and a depth of 500 mm to install this kit correctly, and must be sized for a board thickness of 16 mm at the bottom and back.
The design of the side metal ribs, made of painted steel, improves the stability and durability of the drawer, allowing it to withstand a maximum load of 60 kg without deformation.
This product complies with the quality standards indicated by the CATAS and FCBA certifications, which guarantee its resistance and safety in use.
The slides include a soft closing system that cushions the impact when closing the drawer, providing a quieter slide, avoiding slamming and prolonging the useful life of the furniture.
The kit's components are secured by means of anchoring systems and hardware included in the package, ensuring a solid installation that avoids misalignment during prolonged use.
The thickness of the board required for the bottom and back of the drawer should be 16 mm to ensure a safe and stable installation.
This kit supports a maximum load of 60 kg thanks to the metal ribs and soft closing rails, which ensure stability and strength even under heavy weight.
The drawer front allows a position adjustment of ±2 mm vertically and ±1 mm horizontally, facilitating precise adjustment during installation.
The side ribs are made of anthracite grey painted steel or painted aluminium, offering high resistance to prolonged use, durability and an elegant finish that integrates perfectly into modern spaces.
Synchronised full-extension slides provide smooth and quiet gliding, allowing full access to the drawer interior, which is especially useful in kitchen and bathroom applications where optimised access is critical.
Yes, this bracket makes it possible to block the shelf in order to turn the furniture with the shelf assembled, without falling, which facilitates transport. Likewise, the shelf can be assembled and disassembled easily without the need for tools, thanks to a manual closing plate that frees the steel pivot.
The Sekure bracket can be assembled and disassembled easily without the need for tools, thanks to a manual closing plate that frees the steel pivot.This pivot is put into the bracket, with the short 7.5 mm part remaining within the bracket and the longer 10 mm part is put into the side of the furniture.The plate of the bracket slides, makes it possible to lock the pivot in order to turn the furniture with the shelf assembled, without falling, which facilitates transport.
The following video shows how you can easily install a Strong hanger.
The bottom Strong 32 mm bracket is designed to offer greater adjustment of the position of the unit horizontally and vertically. However, for this unit bracket, it is necessary to have the back part at a minimum distance of 32 mm in relation to the fastening wall.The bottom Strong 3 mm bracket has less adjustment and the back part has to be kept a minimum distance of 3 mm from the fastening wall.
This drawer is compatible with modules that allow a depth of 450 mm and are suitable for 18 mm thick back and front panels.
The kit includes slides, side ribs, a set of front hooks for mounting the drawer and screws required for installation.
This product complies with quality standards such as CATAS and FCBA certifications, guaranteeing its durability and resistance for intensive daily use.
The synchronised full-extension system provides smooth and silent sliding, optimising access to the interior of the drawer by allowing the full capacity to be utilised.
The trim covers enhance the aesthetic design of the drawer by covering the fixings, offering a clean, modern finish that blends in perfectly with the furniture.
This plate is compatible with the drawers of the Vertex, Concept and Convex ranges.
Installation is simple, as the plate is fitted to the side of the drawer by means of a clip located in the lower area, ensuring a firm and quick fixing.
Yes, the front of the plate can be screen-printed with a customised logo or design according to the customer's needs.
The plate is made of polypropylene with a finish available in various colours, such as white, grey and anthracite grey.
Yes, the plate can be installed on the left or right side of the drawer, as required.
The 3D system allows the drawer front to be adjusted in three dimensions: ±2 mm vertically, ±1 mm horizontally and ±1.5/4° inclination for precise adjustments.
The drawer has a maximum load capacity of 60 kg, ideal for kitchen or bathroom furniture applications.
This kit is compatible with 16 mm thick boards for the bottom and back of the drawer.
The eccentric adjustment of the drawer front has settings of ±2 mm vertically, ±1 mm horizontally and ±1.5/4° inclination.
The side ribs and trim covers are made of painted steel, with finishes available in anthracite grey, grey or white.
An LED light may flicker for several reasons, in order to know the cause, you must:Check that the LED light is connected to the correct type of converter, constant voltage or constant intensity.Check that the power of the converter is not less than the total power of the LED lights connected to the converter.Check that that the converter is not overheating. The converter needs to have a suitable operating temperature. The operating temperature is printed on the converter.
If an LED light switches on and then switches off, it is because the converter is overheating.The most common reasons for the converter to overheat are a lack of ventilation in the place of installation or excessive power delivery.In this case the converter is providing all or more of the power that it can give and we will need to replace it with a more powerful converter.
The choice of a system for fold-down doors using a steel cable, like Microwinch or Miniwinch, depends on the height and weight of the door. To do so, you simply need to follow these simple steps:1. Check the height and the weight of the door. 2. Once you have obtained the values, look up the selection table. Depending on the weight of the door, you will be able to choose one fold-down system or another. Also, the table will indicate the number of systems needed for said door (x 1 or x2).
If an LED light does not turn on it is because it needs more power than that provided by the converter or it may be due to a polarity problem.In this case lights connected to a direct current have to maintain polarity throughout the entire circuit (positive with positive and negative with negative).
In order to choose the correct converter or transformer for each light, it is necessary to:1. - Know the type of converter or transformer that corresponds to each light (12V DC, 350 mA or 12V AC). In our catalogue we indicate on each light the type of converter or transformer that must be used through a series of icons.2. - Know the total necessary power (6 W, 15 W, etc.). Once you have chosen the type of converter you have to choose the power that is required. For that purpose, it is necessary to add up all the powers of the lights that you are going to connect to the same converter.For example, you have 4 Orion lights (code 7048162) each 3 W, the total power is therefore 12 W. It is recommended that the converters work at 80% of the maximum power that they withstand. Therefore, we will choose the 15 W LED converter (code 7001420).Likewise, the maximum number of lights that can be connected to the same converter is 6 units, as the AMP distributors have 6 connectors.
Yes, the converters with metal casing need to be earthed and include a specific terminal for connection.
The Atom multiconnector features a Schuko F-type plug (EU) with a maximum power rating of 3,000 W - 13 A, two USB type A connectors with 5V DC output (1 x 2A and 1 x 1.5A), and an HDMI 2.0 connector. This allows a wide range of electrical and electronic devices to be connected.
The manual lift-off lid features a soft-close closure for safe and convenient access to the connectors. In addition, its design includes an LED power indicator for a clear display of the device's status.
It is installed by machining on surfaces of 113 x 116 mm. Brackets and screws are included in the scope of delivery, ensuring a firm fixation and easy mounting on desks or work tables.
The USB ports are ideal for charging mobile devices, tablets and other electronic equipment, while the HDMI 2.0 connector is suitable for connecting displays, projectors and other AV devices.
The multi-connector is made of a combination of plastic and aluminium with a black painted finish, providing resistance to wear and tear and a modern design that integrates perfectly into any office or home space.
No, they are isolated converters. Therefore, they do not need to be earthed.
The Alcor LED Spotlight Kit has a power of 1.2 W per wall light and a luminous flux of 95 lm with a natural white colour temperature (4,000 K). It offers a 90 degree angle of illumination and has energy efficiency class A++.
Installation is recessed and requires pre-machining with a diameter of 16 mm. The spotlights protrude only 1 mm from the surface for a discreet and professional design.
The compact and decorative design of the spotlights allows them to be elegantly integrated into furniture and cabinets, providing functional lighting without compromising the aesthetics of the space.
The kit includes 6 LED lamps, a 15W constant voltage converter, fixing screws and installation instructions. Each wall light has a 1.5 m cable, and the converter includes a 2 m cable for easy electrical connection.
This kit is ideal for interior lighting of furniture, cabinets and display cabinets, providing efficient and decorative light in residential or commercial spaces.
The power tolerance should be -20% in power supplies. That is to say, if the total power of lights connected to a single converter is 12 W, it is necessary to use a 15 W converter. However, if the installation surpasses 12 W, it is necessary to choose a more powerful converter, for example 30 W.
The Plugy connector has 2 USB Type A ports, with a total charging capacity of up to 3.4A (1 port at 2.4A and 1 port at 1.7A). It allows you to charge two electronic devices simultaneously, such as mobile phones or tablets.
The kit includes a USB connector (2 type A ports), a 30W 12V DC converter, and fixing screws. In addition, it has a protection system against overheating, power surges and voltage surges to ensure electrical safety.
Installation requires machining in the cabinet with a diameter of 25 mm. The kit also includes a 2 metre power cable with European plug for easy connection.
This USB connector is ideal for use in home, kitchen or office furniture. It is perfect for charging electronic devices in an accessible and discreet way on desks, worktops or desks.
It is made of plastic with black or painted aluminium finishes. Its compact and aesthetic design allows it to be integrated into any space, offering a practical and modern solution for charging electronic devices.
The Dimmer remote control allows you to control the ON/OFF of the LED lights, adjust the light intensity with dedicated buttons and choose precise brightness levels using a touch wheel.
It has an ergonomic design with a curved area that makes it easy to fit in the hands. Its compact dimensions of 107 mm high, 59 mm wide and 9.2 mm thick make it comfortable to handle.
The controller has a range of up to 20 metres, ideal for controlling compatible LED strips, especially those that support dimming.
It is made of plastic with white finish for the front and black for the back, offering a modern and contrasting design that enhances its aesthetics and functionality.
The package includes a remote control ready to be connected to LED strip controllers. Its wireless design ensures easy and versatile use in lighting installations.
The Lynx flat diffuser profile is designed to completely cover the LED strips, allowing partial light to pass through thanks to its opaque white finish. This softens the illumination and eliminates visible light spots for a more uniform effect.
It has dimensions of 17.5 mm horizontal width and 5.7 mm vertical height, allowing it to perfectly cover standard LED strips while integrating unobtrusively into the design.
The diffuser profile is available in lengths of 2.35 metres and 3.9 metres, providing options to suit different project sizes.
It is made of plastic with an opaque white finish, which offers strength and a clean design, suitable for decorative and functional applications.
The package includes 20 units of the diffuser profile, ready for use. It is ideal for recessed or surface lighting projects in furniture, showcases and ceilings, where homogeneous and aesthetic lighting is sought.
The Microwinch folding door system can be installed in both wooden and aluminium doors.You only need to consider that it needs a door with A+13 where A is the side thickness of the furniture.For example, if the side thickness of the furniture is 19 mm, the door will be fitted at 32 mm.If the aluminium profile is 45 mm wide, it can be fitted because it can go inside the profile.We can also use the Ankor hinge in this combination, because it can fit easily.
The nut has a length of 12 mm with an internal space designed to fit an 8.5 mm screw. The screw, on the other hand, has a thread length of 14 mm, allowing a firm and secure fixing in various materials such as wood, MDF or metal. Both components are made of stainless steel to ensure corrosion resistance.
The chrome finish provides a sleek, modern look, similar to polished aluminium, and offers resistance to wear and oxidation, making it ideal for indoor applications with high visual exposure.
To install the kit, the surface must be pre-drilled to a diameter suitable for metric M4. Then, the screw is inserted from one side, while the trim nut is placed on the visible side, ensuring a tight fit by threading.
This kit is specifically compatible with the M4 metric. For other metrics, it is recommended to check alternative models designed to meet those specific requirements.
It is recommended to clean the chrome finish with a soft cloth and non-abrasive products to avoid scratches. Avoid the use of harsh chemicals to maintain the shine and corrosion protection.
The Red Eye 5 LED Sensor has a power rating of 500W, operates on 220-240V AC input at 50-60 Hz and is designed for lighting systems compatible with this specification. The 1.5 metre cable makes it easy to integrate into different configurations.
The touch design allows the lights to be switched on and off with a light touch, ensuring an intuitive experience. Its metal sensor is highly sensitive, ensuring a reliable response even with frequent use.
The sensor has compact dimensions: 90 mm long, 17 mm high and 40 mm wide, with a contact tip of Ø42.4 mm. This compact size makes it ideal for installation in small spaces or discreetly designed furniture.
For connection, the sensor comes with pre-installed wiring that must be integrated with the 240V AC electrical system. It is recommended to turn off the power before installation and verify that the wiring is properly insulated and connected according to the technical manual.
Yes, the sensor complies with international standards such as CE and RoHS, guaranteeing safety in use, energy efficiency and respect for the environment.
The SIMPLE LED Point Door Sensor uses a proximity sensing system that turns the LED luminaire on or off when it detects interference within a range of 3 cm, such as when a cabinet door is opened or closed. This system is designed to provide accurate and automatic activation.
The sensor is designed to operate on 240V AC input at 50-60 Hz, supporting a maximum power of 250W. It is compatible with LED luminaires and ensures safe and efficient performance in domestic or commercial electrical systems.
The cable with TYPE 8 plug allows the sensor to be connected directly to the converter without the need for additional adapters. This connection facilitates quick and safe integration into the lighting system.
No, the sensor has a fixed detection range of 3 cm which cannot be adjusted. However, its compact design and predefined range make it ideal for specific applications, such as cabinets and furniture.
The sensor is made of plastic with an aluminium painted finish, giving it resistance to wear and tear and a modern aesthetic that integrates easily into furniture design. In addition, its materials ensure durability in indoor environments.
The Lynx Basic LED strip has an output of 9.6 W/m, an efficiency of 69 lumens per watt and a total of 120 LEDs per metre. These specifications ensure uniform and high quality illumination for decorative or functional applications.
The IP65 certification ensures that the LED strip is dust and splash water resistant, making it ideal for indoor applications and semi-covered areas such as kitchens, bathrooms or furniture that may be exposed to occasional moisture.
The LED strip can be cut at marked intervals, usually every 25 mm, to suit the desired length. Connections can be made using specific connectors for LED strips or by soldering wires to the exposed contact points, ensuring adequate insulation.
Cool white light (6000K) is ideal for environments where brighter and more functional lighting is desired, such as offices, kitchens or work areas. Warm white light (3000K) is more suitable for cosy environments, such as living rooms or bedrooms, where you want to create a relaxing atmosphere.
For installation, it is recommended to use the adhesive tape included on the back of the strip, which is suitable for smooth and clean surfaces. In case of textured or difficult to adhere surfaces, additional fixings such as clips or aluminium profiles can be used to ensure a firm installation.
The Lynx curved diffuser profile has a height of 17.4 mm, a width of 15.4 mm and a thickness of 5.9 mm. These dimensions allow the diffuser to fit perfectly over LED strips and to be securely clamped into the corresponding profile tabs.
The transparent-opaque plastic provides homogeneous light diffusion, reducing glare and shadows, while hiding the direct view of the LEDs. This enhances aesthetics and creates a soft and pleasant illumination.
Installation consists of placing the diffuser on the profile that houses the LED strip. This is done by pressure using the tabs of the profile as a support. No additional tools are required, but it is recommended to clean the surfaces before installation.
Yes, the profile can be cut to size using tools such as precision saws or plastic cutters. It is important to make clean cuts and avoid edge damage to ensure a good fit.
The curved design of the diffuser optimises light distribution, creating a more uniform effect and reducing bright spots. This makes it ideal for decorative and functional applications in furniture or interior spaces.
We have a table for calculating the pistons or dampners, where you can obtain a response with the furniture data.The choice will depend on the width and the height of the door, as well as the material it is manufactured out of, in addition to the stroke of the piston or damper itself.The result will be the number of pistons or dampners and the necessary strength of each one.
The Lynx Premium LED Strip is suitable for both indoor and outdoor use thanks to its IP65 certification, which protects it against dust and splashes, and its slim 8mm design that makes it easy to install in tight spaces.
IP65 certification ensures that the strip is dust and moisture resistant, making it ideal for bathrooms, kitchens or semi-covered areas, guaranteeing long-lasting performance in these conditions.
To cut the LED strip, use sharp tools and cut at the indicated marks. When connecting segments, use specific connectors for LED strips or safe soldering, making sure to maintain correct polarity and protect the connections with adequate insulation.
When combining several LED strips, it is essential to calculate the total power and select a 12V DC converter that can handle the load. It is also recommended to check the continuity of the connections to ensure smooth operation.
To keep the LED strip in optimal condition, clean it with a dry cloth and avoid using abrasive products. Periodically inspect the electrical connections and ensure that the strip is installed on a clean and stable surface.
The switch operates automatically when the enclosure door is opened, switching on the connected luminaire. When the door is closed, the switch switches the light off. This simple mechanism is efficient and unobtrusive.
Yes, the switch is compatible with both hinged and sliding doors. For hinged doors, make sure that the switch is aligned with the furniture frame. In the case of sliding doors, it is important to locate it in a place where it does not interfere with the sliding of the door.
Installation is simple: the switch is screwed to the surface of the furniture in the desired position. It is advisable to use a drill with a small drill bit for pre-drilling and a screwdriver to secure the installation.
The switch is compatible with 230V AC and 50Hz luminaires. It can be used with LED strips and LED spotlights that meet these electrical specifications, ensuring a safe installation.
The compact design makes it easy to integrate into discreet furniture without affecting the overall aesthetics. The black and white finishes allow the switch to be combined with different styles and colours of furniture, providing decorative versatility.
The following video shows how you can easily install the aforementioned LED lighting.
The following video shows how you can easily install the aforementioned LED lighting.
The Lynx W diffuser profile is designed with precise dimensions to perfectly fit 8 mm wide LED strips, ensuring a secure installation and a movement-free fit within the Lynx W aluminium profiles.
The translucent polycarbonate material allows for an even distribution of light, eliminating visible light spots and creating homogeneous illumination. It is also strong, durable and easy to clean.
Yes, the Lynx W diffuser profile can be cut to size. For a clean and precise cut, it is recommended to use a fine-toothed saw or a specific cutting tool for polycarbonate.
This diffuser profile is ideal for applications in home furniture, offices, kitchens and bedrooms, where integrated and discreet lighting is desired. It is perfect for cabinets, shelves and under kitchen furniture.
By using the Lynx W diffuser profile, the light from the LED strips is evenly distributed, eliminating glare and improving the aesthetics of the lighting project. This results in soft and professional lighting in any space.
The following video shows how you can easily install the aforementioned LED lighting.
To install the Lynx W profile, the furniture must be machined to a width of 14 mm and a depth of 11 mm. These dimensions guarantee a perfect and secure fit of the profile.
The aluminium profile with painted or anodised finish offers high resistance to corrosion and wear. In addition, its finish enhances the aesthetics and can be combined with different styles of furniture.
Yes, the Lynx W profile can be cut to size. It is recommended to use a thin-cutting saw or aluminium specific tools to obtain a clean cut and avoid deformation.
This profile is ideal for lighting projects in kitchen furniture, wardrobes, offices and bedrooms. Its design allows discreet integration of LED strips, providing functional and decorative lighting.
The Lynx W profile is designed to be compatible with Lynx Q and Z sensors and cables, ensuring easy installation and optimal operation of the lighting system.
The following video shows how you can easily install the aforementioned LED lighting.
For the same force required in both folding and lift up doors, we recommend that you only use a single piston or damper in a door with a width of less than 450 mm, and that you use two pistons or dampers for a door that is wider than 450 mm.
COB (Chip On Board) technology eliminates visible spots in the light, providing uniform and continuous illumination, ideal for applications where an aesthetic and homogeneous finish is required.
The Lynx Premium COB LED Strip requires a 24V DC converter for installation. This voltage ensures correct operation and efficient performance.
The LED strip can be cut every 55.5 mm, allowing precise customisation to suit the needs of each project, maximising material utilisation.
It is ideal for applications in built-in or surface furniture, especially in projects requiring continuous or curved lines, thanks to its flexibility and adaptability.
The strip is made of a double-layer PCB and 3M® 300LSE adhesive tape, which guarantees a strong and stable fixation on aluminium surfaces or other compatible materials.
Yes, they are compatible with all the accessories.Please note: Lynx Premium and Basic LED strips of 4.8 W/m, 9.6 W/m and 14.4 W/m are 8 mm wide, while the Lynx Premium LED strip of 28.8 W/m is 10 mm wide.
The Lynx Z LED cable supports a maximum power rating of 36W at 12V DC (3A) and 72W at 24V DC (3A), offering versatility for various lighting configurations.
The integrated MiniLED connector allows quick and secure connections without the need for additional tools, optimising installation time.
The transparent finish minimises the reduction of luminous flux, ensuring uniform illumination without visual interference.
This cable is compatible with 8mm wide LED strips, making it ideal for projects that use Lynx W profiles and require discreet and efficient connections.
It is important to ensure that the connections are correctly aligned and that the ends are securely snapped into the MiniLED connector to avoid disconnection or loss of electrical signal.
The Lynx surface profile set is installed by screwing the aluminium profile directly to the surface of the furniture, which ensures simple and fast installation.
The curved diffuser profile is 17.4 mm wide and 4.4 mm high, while the aluminium profile is 18 mm wide and 10.7 mm high. Both have a length of 2.35 m.
End caps are not included in the kit and must be purchased separately if a more aesthetic finish is required.
The matt anodised finish provides increased wear resistance, corrosion resistance and a modern and elegant look that suits different furniture designs.
Yes, the profiles can be adjusted to specific dimensions by cutting them with specialised tools, such as a thin-cutting saw for aluminium or a precision hand-held cutting tool, ensuring clean, burr-free edges.
The LED Lynx strip with a variable colour temperature has a controller that makes it possible to select a colour temperature of cool white, natural white or warm white, in a range between 3,000 Kelvin and 6,000 Kelvin.
With this table you can calculate the total power of an LED strip.
The maximum recommended length of the installation of LED strips is indicated in our catalogue with a symbol on each LED strip.The table outlines the maximum recommended length if the power supply is only provided via one length (a converter). It also outlines the maximum recommended length if the power supply is provided via both ends (two converters) that multiply by two.Please note: To power the strip via both ends you need to create a special connection. Look up how can to ensure that the LED strip has the same brightness all along it.
The proximity touch sensor integrated in the Kaus LED wall light switches the luminaire on when it detects movement at a distance of 7 cm. To switch it off, simply wave your hand in front of the sensor again.
The rechargeable battery has a capacity of 850mAh, offering a battery life of up to 400 power-on cycles of 20 seconds each. Charging time is approximately 2 hours using a conventional 5V DC 1A mobile phone charger (not included) and a micro USB type C cable (included).
Yes, the wall light allows you to adjust the colour temperature between 3000K, 4000K and 6000K with a touch of the touch sensor. This allows it to adapt to different lighting needs.
The package includes a rechargeable LED wall light, as well as adhesive metal bases and screws for optional mounting. It is easily installed by attaching it to metal surfaces or using the included adhesive tapes, without the need for additional tools.
The proximity sensor has a detection range of 7 cm and automatically switches off after detecting a second movement, optimising battery usage and ensuring efficient power consumption.
The Centaurus mirror features 4,000K decorative LED backlighting, which provides a uniform, shadow-free, natural white light, ideal for improving visibility in the bathroom or any space in the home.
Yes, the Centaurus mirror is designed for wet environments, as it has an IP44 rating, making it resistant to moisture and splashing water.
The dimensions of the mirror are 800 x 600 mm, with a glass thickness of 4 mm. In addition, a 1 metre long power cable is included.
Yes, the design of the mirror allows it to be installed both vertically and horizontally, adapting to different space and style configurations.
Package includes:
1 Centaurus mirror
Mounting brackets and plugs
Installation hooks
Detailed installation instructions. This facilitates quick and safe installation.
The following video shows how you can easily install the aforementioned LED lighting.
When this happens, it is necessary to bear in mind that the controller switches on the output switch when it detects the movement of a human body.That is to say, the controller does not detect the movements of objects, for example the movement of a door.Also, in order for it to detect movement, it is necessary to cut across its detection range. The MOTION sensor has a detection range of 2 metres and an angle of 90º.
The following video shows how you can easily install the aforementioned LED lighting.
The Neonlynx LED strip is 6mm wide by 6mm deep, allowing it to be integrated into furniture recesses. It is available in 1m, 3m and 5m lengths, with a flexible design that allows for curved or straight shapes.
Yes, thanks to its IP65 protection rating, the strip is waterproof and suitable for installation in damp or outdoor locations.
It requires a 24V DC power supply, for which an LED converter is necessary, which is not included in the scope of delivery.
The Neonlynx LED strip has an efficiency of 87 lm/W, emits a luminous flux of 210 lumens per metre, and has an output of 7.2 W/m.
It is connected via 1.5 m power cables pre-installed at both ends. The strip includes fixing jumpers for panel mounting and requires no soldering due to its optimised design.
The following video shows how you can easily install the aforementioned LED lighting.
The Neonlynx H LED strip uses high quality silicone, which maintains light uniformity, protects against moisture and helps control colour temperature variation.
It can be cut every 33.5 mm, which allows great versatility to adjust it to any size required in the installation.
It offers a natural white colour temperature (4,000 K) with an illumination angle of 120°. Its illumination is uniform and without visible spots.
No additional connectors are included, but the strip has 1.5m power cables at both ends for easy connection.
Yes, it is compatible with dimmer systems, optimising energy consumption according to the user's needs.
In order to control the RGB LED strip you need an RGB controller with a radio frequency remote control. If in the facility there are two controllers they can both be controlled with a single remote as all the controllers have the same frequency.
In order to choose the correct converted for an LED strip it is necessary to:
- Know the type of converter that corresponds to the LED strip. In our catalogue we indicate on each light the type of converter or transformer that must be used with a series of icons.
- Find out the total power required of the converter (6 W, 15 W, 30W, 50W, 72W, 100W, 200W). In order to calculate the power of a specific length of strip, it is necessary to know what the total power of the 5m roll is (our sale unit) and what is the length of it that we need for installation.
For example:If a 5 m strip (a roll) has a power of 24 W and I need will be for the installation a 2 m strip:
X= (2m x 24W) / 5m = 9,6W
Therefore, I will choose the 15W converter. Attention, it is necessary to add up the consumption amounts of the different strip accessories if they are included in the fitting.
Lynx Premium COB LED strip provides uniform illumination with no visible LED spots, ideal for creating continuous lines of light in decorative and functional applications.
The strip requires a 12V DC LED converter for operation, as it is not included in the scope of delivery.
The LED strip can be cut into segments every 25 mm, making it easy to customise according to the available space and installation.
It is available in colour temperatures of 6,000K (cool white) and 2,700K (warm white), allowing it to adapt to different environments.
It is manufactured on a double-layer PCB and equipped with 3M® 300LSE adhesive tape, which guarantees excellent adhesion to different surfaces and high durability.
The sensor uses infrared technology with a detection range of 5 cm, offering precise, non-contact activation.
It is ideal for applications in panels, headboards, kitchen furniture and different rooms in the home, thanks to its versatile and compact design.
Installation requires a Ø8 mm drill hole in the surface of the material. Includes a 2.5 m cable and a 6-input MiniLED distributor for easy mounting.
Supports 12V DC and 24V DC voltages, with a maximum power of 36W or 72W, depending on the connected LED system.
It is protected against electrical and electromagnetic interference, ensuring stable operation even in environments with high levels of electrical noise.
The distributor cable allows up to 6 LED luminaires to be connected and managed simultaneously via a single 12V or 24V sensor.
It uses a Miniled connection, ideal for LED lighting systems compatible with this type of connection.
Yes, it is fully compatible with Miniled sensors operating on 12V DC and 24V DC.
The cable is 10 cm long, making it easy to connect several luminaires to a single sensor output.
The kit includes 1 distribution cable with 6 outlets and 1 inlet with Miniled connection, made of plastic with black finish.
The app allows you to switch on, switch off, adjust the intensity (dimmer) and create customised scenes for different times of the day or home environments. In addition, voice commands can be sent.
This receiver can control up to 5 LED luminaires connected via the Miniled connectors, ensuring simultaneous control.
Yes, the receiver is compatible with Google Assistant and Alexa, allowing full control of the lights via voice commands.
It can be paired with up to 6 RF transmitters. The process is simple: press the pairing button on the receiver and the transmitter for 10 seconds. To unpair, repeat the procedure.
It is easily installed on the converter output with Miniled connections. Its compact design allows for concealed location with a maximum range of 5 metres from the RF transmitter.
The choice of a system for Agile One lifting doors depends on the height and the weight of the furniture door. To do so, you simply need to follow these simple steps:
1. Check the height and weight of the furniture door.
2. Once you have obtained the values you need to calculate the strength of the spring, S = H * (W + 2 * Wh), in terms of: H = Height of the door in mm. W = Weight of the door in kg. Wh = Weight of the handle in kg. You can choose the lifting system according to what interval the strength of spring S falls under. The MEDIUM interval is between 500 and 1,500, HIGH between 960 and 2,350.
For example, we have a door with a height of 400 mm and a weight of 5 kg, with a handle that weighs 0.22 kg. The strength of the spring would be S = 200 * (5 + 2 * 0.22) = 1,088. Therefore, we would choose the HIGH strength range because it is in the interval of 960 and 2,350.
The following video shows how you can easily install the aforementioned LED lighting.
Yes, we recommend fully charging the battery of the Castor luminaire before installation.Although some batteries may be partially charged upon arrival, the charge will be minimal and simply for testing purposes. Therefore, a fully charged battery should be used for installation.
The Castor battery-powered light has a range of 700 lighting cycles per charge before the batteries run out.
The sensor is activated by touch, switching the luminaire on or off. In addition, the light intensity can be adjusted with its dimmer function by maintaining contact with the sensor.
Yes, the sensor has two lenses that function as independent switches, allowing luminaires to be controlled from either lens indistinctly.
It is compatible with 12V or 24V DC LED luminaires and Smart converters. It also supports up to 6 secondary outputs with Miniled connection.
It is ideal for bed headboards or areas where convenient tactile control is required, such as built-in furniture or areas with direct access to the lens.
Includes a 1.5 m cable with Miniled connections and an additional 1 m cable for the lens. Installation is easy thanks to its compact dimensions and recessed design in 8 mm diameter furniture.
The battery of the Castor light is recharged with a mobile charger. The charger needs to have a type B micro USB connector and should at least supply 5V DC.This battery is located on the side support with a cover, which must be taken off in order to recharge it.Likewise, it has an LED indicator that goes from red to green when charging is complete after an approximate period of 4 hours.
The battery has an LED indicator that goes from red to green when charging is complete after an approximate period of 4 hours.
The following video shows how you can easily install the aforementioned LED lighting.
The I-connector is specifically designed to join 24V DC Pyxis LED luminaires, facilitating installation in linear configurations.
It allows the creation of longer luminaires by making use of surplus lengths of up to 5 metres.
Its self-sealing design and metal connectors ensure a solid and stable connection, preventing slippage within the profile and guaranteeing the passage of current from one luminaire to another.
It is made of transparent plastic and metal connectors. The transparent plastic maximises the luminous flux at the junction, while the metal connectors ensure efficient current transmission.
No, its transparent plastic construction means that the passage of light at the joints is not affected, guaranteeing uniform illumination.
The L connector is ideal for applications that require creating 90° angled junctions with the Pyxis 24V DC LED luminaire, perfect for perimeter lighting or corner designs.
It is necessary to cut the profiles at 45° mitres to ensure a perfect fit at 90° joints.
Allows luminaires up to 5 metres in length to be connected, optimising installation in angled designs.
It is made of transparent plastic with metal connectors. The transparent plastic optimises the passage of light, while the metal connectors ensure efficient current transmission.
No, the transparent design of the connector allows a uniform luminous flux to be maintained at the corner joints, maximising aesthetics and functionality.
The frame is designed for enclosures with an internal recess of 623 mm to 1075 mm, depending on the selected reference. The minimum depth required is 450 mm.
The clipping system facilitates installation without the need for complex tools. Screwing to the side of the enclosure is all that is required, which reduces assembly time.
Yes, the frame includes soft-close, partial-extension slides, ideal for smooth and quiet movement when opening or closing the cabinet accessory.
It is made of aluminium and plastic with a textured painted finish in black or stone grey, ensuring durability and a modern aesthetic.
Each package includes:
1 frame,
1 set of guides,
1 set of cover caps,
8 fixing screws Ø4x16 mm.
The use of the side spacer is necessary when the enclosure door coincides with the location of the frame and can collide with it, especially in enclosures with sliding or hinged doors.
A compatible screwdriver is required to install the Ø4x25 mm and Ø4x40 mm screws, according to the mounting specifications. No additional tools are required.
The spacer is 25 mm thick, which is the necessary distance to avoid collisions between the frame and the side of the enclosure.
This spacer is designed exclusively for the Hack pull-out frame, guaranteeing optimum compatibility with its slides.
Multiple spacers can be installed in a single enclosure if multiple Hack racks are used. Each package includes the components required for the installation of a single spacer.
The drawer is available in two heights: 482 mm (M60) and 782 mm (M90). These dimensions are suitable for module widths of 600 mm, 800 mm and 900 mm.
The drawer is easily installed using the 6 plastic parts included in the package, which ensure a firm and secure connection to the frame.
Yes, the wire drawer is designed to combine perfectly with the different Hack accessories, allowing you to create customised configurations for wardrobes and dressing rooms.
The drawer is made of painted steel, which gives it a high strength and load capacity suitable for clothing and accessories. The maximum capacity depends on the Hack frame with which it is installed.
Yes, the drawer is available in textured black and stone grey painted finishes, allowing you to choose the one that best suits the aesthetics of your wardrobe.
The shoe drawer is available in two heights: 482 mm (M60) and 782 mm (M90), compatible with 600 mm, 800 mm and 900 mm wide Hack modules, with a minimum depth of 450 mm.
The anchoring system is based on 6 high-strength plastic parts that secure the attachment to the frame by means of screws. This guarantees structural stability even under maximum loads.
The painted finish, either textured black or stone grey, is designed to resist abrasions and maintain its appearance under heavy use in residential and commercial applications.
It is made of powder-coated steel, which provides corrosion resistance and excellent mechanical behaviour against impact and deformation.
The modular design allows the drawer to be combined with different Hack accessories, adjusting the space configuration to optimise storage according to the size of the modules and the number of shoes.
The maximum recommended load for trouser rods depends on the type of installation and frame support, but they generally support up to 5 kg per rod without compromising stability or deformation.
Cabinet modules must have a Hack compatible frame, with internal dimensions suitable for the correct positioning of the rods, and ensure that the fixing surface is flat and strong.
Cutting or modifying the rods is not recommended as it may compromise their structural integrity and coating. In case of adjustments, it is preferable to use solutions custom-designed by the manufacturer.
Plastic end caps reduce noise by preventing direct contact of the metal with the frame and ensure a smooth glide during frequent use of the system, enhancing the user experience.
Yes, the rods are compatible with additional accessories such as Hack System organiser trays and other elements designed to optimise space in wardrobes and dressing rooms.
No, the organiser drawer does not include a damping system, but it can be installed in Hack racks with soft-close slides to minimise noise and shock when closing.
Yes, the design of the Hack frame makes it possible to combine the organiser drawer with other accessories, such as the trouser rack or wire basket, as long as the internal dimensions of the wardrobe module are respected.
The drawer is made of wood with a textile covering and, although it is resistant to moderate wear and tear, it is recommended to avoid sharp or abrasive objects that could damage the surface.
The texture of velvet requires careful maintenance. It is ideal to use a soft brush or lint roller to keep it clean and dust free.
The drawer can be installed in cabinet modules without doors, but to protect the contents and prevent dust accumulation, a closed module or a module with doors is recommended.
The auxiliary tray measures 396x120x146 mm, providing a compact but efficient space for storing small garments, accessories or similar items.
The tray is easily mounted on the Hack pull-out frame and is fully compatible with other accessories such as the trouser rods, shoe rack and organiser drawer, creating a versatile modular system.
It is made of plastic with a semi-transparent finish, making it resistant to moisture, easy to clean and suitable for use in a variety of locations, such as the bathroom or dressing room.
Yes, the tray can be used as a stand-alone item. It is ideal as a toy holder in children's rooms, an organiser in bathrooms or even for storing cleaning products.
The tray is designed to support the typical weight of lightweight garments and accessories. Its design optimises weight distribution, ensuring stability when attached to the Hack frame.
The Hack side shoe rack incorporates concealed slides with partial pull-out and soft close systems, providing a smooth glide and avoiding bumps when closing.
The trays can be adjusted in horizontal or 90° inclined positions. Adjustment is made by means of a simple clamping mechanism included with the trays.
It is available in left or right hand mounting versions. Installation varies according to the model selected, but both include a set of specific guides and screws to facilitate assembly.
The shoe rack is designed to support the typical weight of footwear stored on the three tilting trays. Its design optimises efficient organisation and access to footwear in confined spaces.
Made from steel with a textured painted finish, the Hack side shoe rack is resistant to moisture and wear and tear, ensuring long-lasting use in wardrobes and dressing rooms.
The tray dividers are attached to the base by means of a magnetic strip, allowing them to be positioned and adjusted securely and flexibly according to the user's needs.
The tray has a width of 483 mm (M60) and includes dividers designed to fit perfectly into the space available in 600, 800 and 900 mm Hack modules. This optimises storage by creating dedicated compartments.
The tray is built to support common wardrobe loads such as clothing and accessories. It is recommended to be installed on the Hack frame to ensure correct weight distribution and prolong its life.
The dividers can be arranged both vertically and horizontally thanks to their modular design and the magnetic strip on the base. This allows specific configurations for storing items such as shoes, accessories or folded clothes.
Manufactured from steel with a textured painted finish, the tray offers high resistance to moisture and wear and tear, making it ideal for heavy duty applications in walk-in wardrobes and cupboards.
The organiser basket has an ideal capacity for storing garments and objects. Its specific dimensions are 350x240 mm, optimised to fit Hack racks.
Yes, the organiser basket is compatible with trays and racks from the Hack system, allowing for versatile and functional integration into wardrobes and dressing rooms.
It is made of fabric with a grey textile effect finish, which gives it strength and an elegant design, suitable for everyday use in dressing rooms and wardrobes.
It is recommended to clean the basket with a damp cloth to preserve the grey textile finish. Do not machine wash or tumble dry to avoid damage to the material.
The folding design of the basket saves space when not in use, making it easy to transport and store without compromising its functionality.
The frame has an adjustment range for cabinet interiors of 560 to 594 mm in the M60 module and 760 to 794 mm in the M90 module, with a minimum cabinet depth of 450 mm.
The shoe rack offers enough space to organise several pairs of shoes, optimising the interior of the wardrobe and allowing combinations with other accessories from the Hack system.
The frame is made of aluminium and plastic with a painted finish, while the shoe rack is made of steel with a textured finish, guaranteeing strength and an elegant design.
The soft closing system integrated in the slides ensures a controlled and silent sliding, preventing knocks and increasing the lifespan of the shoe rack.
The kit includes all the necessary components: 1 frame with guides, 1 wire shoe rack and 8 screws (Ø4x16mm). No additional tools are required for installation, making assembly easier.
The adjustment range of the frame makes it possible to adapt to enclosure widths between 560 mm and 594 mm for the 600 mm module. Installation accuracy is ensured by using the included fixing screws and adjusting the frame to the available space according to the side guides.
The wire crate is designed to support a maximum load of 20 kg. The frame structure, made of aluminium and high-strength plastic, distributes the weight evenly and ensures optimum performance even with intensive use.
The finish of the drawer and frame has a textured painted coating that offers high resistance to corrosion and wear, ideal for wet environments or constant use. This treatment protects the materials from scratches and ensures durability.
The assembly of the frame slides is carried out by fixing them to the furniture using screws Ø4x16 mm included in the kit. The slides have a soft closing system that facilitates alignment during assembly and ensures smooth opening and closing.
The sliding and soft closing system complies with European furniture quality standards, ensuring a minimum durability of 60,000 opening and closing cycles. This guarantees efficient performance and reduces noise in daily use.
The kit's frame allows an adjustment range of 560 mm to 594 mm, ensuring compatibility with 600 mm enclosure modules.
The organiser drawer has a maximum load capacity of 20 kg. The frame distributes the weight evenly thanks to its aluminium and reinforced plastic construction, preventing deformation and ensuring stability.
The drawer and frame finishes are painted with a textured coating that provides high resistance to wear, scratches and corrosion, as well as offering an aesthetic design suitable for different environments.
The frame slides are fixed to the furniture using the Ø4x16 mm screws included in the kit. They incorporate a soft-close system that facilitates precise adjustment during installation and ensures smooth and silent movement.
The frame guides meet European quality standards to withstand 60,000 opening and closing cycles, ensuring long life and optimum performance in frequently used applications.
The kit frame is adjustable to fit enclosure modules with an internal width of 560 mm to 594 mm, ideal for standard 600 mm modules.
The tray is made of steel with textured finishes, while the frame combines aluminium and reinforced plastic. These materials guarantee high wear resistance, structural stability and modern aesthetics.
The tray includes steel dividers that attach magnetically to its base, allowing custom configurations for vertical or horizontal organisation of garments and accessories. This makes it easy to adapt to different storage needs.
The frame slides feature a soft closing system that provides smooth, quiet and safe movement, protecting the stored items and ensuring comfortable and long-lasting use.
The kit includes a frame, a metal tray with dividers, a set of guides and the screws necessary for assembly. Installation is simple and is carried out by fixing the rails to the inside of the cabinet with the screws supplied.
The frame is adjustable to fit enclosure modules with an internal width of 560 mm to 594 mm, complying with 600 mm module standards.
The rods are made of aluminium with high-quality plastic finials, while the frame combines aluminium and textured plastic, ensuring durability, lightness and resistance to wear and tear.
The stability of the trouser rods is ensured by a design that allows them to fit firmly into the frame, preventing displacement during use.
The soft-close guide system provides a smooth and quiet glide, protecting garments and improving the wearing experience by avoiding jerky movements.
The kit includes an adjustable frame, seven trouser rods, a set of runners and the necessary screws. Assembly is simple, as all that is required is to fix the slides to the inside of the wardrobe and adjust the frame to the desired width.
The kit includes 2 soft closing devices, designed to dampen the movement of a sliding door, ensuring a controlled and silent closing.
The Flow inverted soft close is designed for symmetrical sliding doors, allowing installation on both top and bottom profiles, increasing its versatility compared to other systems that only work in one direction.
Yes, the system is compatible with 30 kg and 50 kg doors, ensuring optimum performance and adapting to the needs of various furniture projects.
The system does not require frequent maintenance due to its high quality materials, but it is recommended to periodically check the fastening of the screws and clean the guides to avoid dust accumulation.
No, the soft close can be installed directly on the guide profiles without the need for pre-machining, which makes it easy to install in different types of enclosures.
The channel Placard bottom rail is available in lengths of 2.35 m and 3.9 m, allowing it to be adapted to different door and cabinet sizes.
The rail is made of matt anodised aluminium, which guarantees high corrosion resistance and a modern and durable appearance.
The rail is fixed to the underside of the cabinet by means of screws, using the holes already provided. It is designed to facilitate installation and ensure alignment of the sliding doors.
The track is compatible with Placard system sliding doors, designed for board thicknesses of 16 mm. It supports doors up to 70 kg, offering a smooth and stable movement.
The track has a channel design with a height of 5.5 mm and a width of 66 mm, providing precise guidance for the doors. Its aluminium construction ensures stability and strength.
This track is specifically designed for Placard sliding wardrobe door systems, compatible with panels of different thicknesses and systems that require precise and smooth bottom guidance.
The rail is available in lengths of 2.35 m and 3.9 m, with white painted and matt anodised finishes.
Installation is carried out by fixing the track to the floor or cabinet base using screws or adhesives according to the system specifications. Correct levelling of the rail is essential to ensure optimum sliding of the doors.
Aluminium provides high corrosion resistance, light weight and an aesthetic finish that remains in perfect condition over time. In addition, its design allows the sliding doors to slide silently and smoothly.
For maintenance, wipe regularly with a dry or slightly damp cloth to remove dust and dirt. Avoid using abrasive chemicals that may damage the finish. Make sure there are no obstructions in the grooves that interfere with the sliding of the doors.
This track is compatible with door thicknesses of 10 mm, 16 mm, 18 mm and 19 mm, guaranteeing precise sliding and a perfect fit in Placard sliding systems.
It is available in lengths of 2.35 m and 3.9 m, with finishes such as white painted, black painted, anthracite grey, matt anodised and gold anodised, adapting to different design styles and functional needs.
Installation is carried out by fixing the rail to the base of the enclosure, ensuring adequate levelling to avoid unevenness that could affect sliding. It is compatible with the cover profile and the guide system for a complete assembly.
The system can support a maximum weight of 70 kg per door, provided that compatible Placard system hardware and profiles are used.
It is recommended to clean the track regularly with a soft cloth to remove dust and debris that may interfere with the movement of the doors. Avoid abrasive products that may damage the aluminium finish.
The Placard U10x16 crossbar is used to provide greater stability and structural reinforcement to sliding door systems, allowing for smooth and safe sliding.
The crossbar has a length of 2.35 m, a profile of 10x16 mm and a thickness of 1.5 mm.
It is made of matt anodised or painted aluminium (black or white), guaranteeing resistance to wear and tear and a high quality finish.
Yes, the crossbar is compatible with Placard sliding door systems and other similar models using this type of reinforcement.
Yes, the transom can be cut with standard tools to fit the specific dimensions of the cabinet or door.
The main function of the Placard UB14x4 crossbar is to provide greater stability to sliding doors, avoiding oscillations during opening and closing.
The crossbar is made of aluminium, a strong and lightweight material that does not add extra weight to the cabinet structure.
The crossbar has a length of 2.35 m and 2.9 m, which makes it suitable for standard sized cabinets in Placard systems.
Yes, the aluminium used is treated to provide corrosion and wear resistance, prolonging its service life.
Installation is carried out by fixing the crossbar to the structure of the Placard sliding door system. It is recommended to follow the manufacturer's instructions to ensure correct installation.
Yes, the aluminium profile included in the kit has a length of 2.7 metres and can be cut to the desired length to fit shorter doors, always using suitable tools to ensure a clean cut.
No, this kit is specifically designed for doors made of 19 mm thick boards. For glass doors you would need adapters or kits specifically designed for that material.
The main difference is the position they are fitted in during installation.The 12V sensors (Twelfy) are placed between the light and the converter. Consequently, the converter is always working.The 240V sensors (Red eye) are placed between the converter and the electric socket.The big advantage of a 12 V sensor (Twelfy) is that is makes it possible to connect with a single converter (maximum admissible power 40W), on the other hand the 240V sensors (Red eye) need two converters.
The aluminium profile has a matt anodised finish, which gives it high resistance to corrosion, wear and tear and a uniform aesthetic appearance that lasts over time.
The kit includes 2 x 2.7 m Vall 19 pulls, 1 dust cover, 2 Channel trolleys, 2 Channel runners and 2 brakes. It does not include tools or specific fixing hardware, which must be selected according to the type of mounting surface.
It is recommended to periodically clean the rails and carriages to remove dust and debris that may affect sliding. In addition, it is advisable to lightly lubricate the moving mechanisms with a suitable product every 6 months.
Yes, it is possible to install additional handles on the panels, provided they are compatible with the 16 mm thickness. It is recommended to drill accurately and use suitable screws to avoid damaging the material.
The system is designed to withstand a maximum weight of 30 kg per door. Exceeding this limit could compromise the smooth sliding and durability of the hardware. It is important to respect the specifications for optimum performance.
Yes, the steel ball bearing bearing system ensures smooth and durable sliding, even with intensive use. This design minimises wear and reduces noise when opening and closing the doors.
Basic tools such as a drill, screwdriver, tape measure, level and a saw to cut the aluminium profiles to size, if necessary, are required for installation. Tools are not included in the kit.
Yes, the kit is suitable for built-in wardrobes, provided that the dimensions of the space allow the installation of the included top and bottom rails, which have a maximum length of 2.35 metres.
The Red Eye sensors that functions at 240V AC are different in accordance with their functionality and your needs."I need a sensor that turns on and off the light like a switch but without physically touching the furniture".
SWITCH. Red Eye 1 (switch) Code. 7001520. An ON/OFF proximity detection system that turns on or off when its detection range of 5 cm is triggered."I need a sensor that turns on lights when it detects the movement of a human body and turns off automatically after a while, providing that it does not detect the movement of a human body, ideal for walk-in wardrobes".
MOTION. Red Eye 4 (movement) Code. 7001820. A movement detection system, it turns on when the detection range of 2.5 m IS triggered and the switching off can be adjusted between 10 seconds and 3 minutes."I need a sensor that turns on the light through contact with a metallic surface, ideal for bed headboards".
METAL. Red Eye 5 (touch) Code. 7001920. Detection system through contact with a metal surface. Adjustable detection ranges and/or functioning according to needs.
A saw is required to cut the handle to the desired length, as well as basic tools such as a drill and screws to attach it to the 16 mm board.
Yes, the Wave 16E handle is specifically designed for use with the Placard 61 sliding door system, providing an integrated and aesthetically coherent solution.
It is made of matt anodised aluminium, which guarantees durability, corrosion resistance and a modern and elegant finish.
The handle has a length of 2.8 m. It can easily be cut to size to suit the height or specific design of the cabinet doors.
The handle is designed for boards with a thickness of 16 mm, ensuring precise fixing and uniform aesthetics.
The Placard 74 trolley kit is designed for sliding doors weighing up to 70 kg and has 45 mm diameter wheels to ensure smooth and quiet running. It is made of zinc-plated steel and plastic for durability and corrosion resistance.
This kit is compatible with channel bottom rail systems such as Placard 74, Placard 81 and Placard 90. The rails must be suitable for 45 mm wheels and must be installed accurately to avoid misalignment.
The locking/unlocking system facilitates the fixing of the trolleys during assembly, avoiding unwanted movements. In addition, the lock can be deactivated once the trolley is in place, guaranteeing safety and comfort during adjustment.
The cover screw should be used if you do not have another metallic surface for activating the touch sensor, it is also the most preferred aesthetic option. However, the Red Eye 5 metal touch sensor can be connected to any metal item in order to activate the sensor, for example the light fitting itself.
The height adjustment is carried out by means of a screw which allows the position of the wheel to be changed by up to 10 mm. This ensures precise levelling of the door, even in cases of unevenness in the floor or cabinet structure.
The kit includes 2 trolleys, 8 fixing screws for the trolleys, 6 screws and 6 dowels with a diameter of 6 mm for fixing the top track to the ceiling. These components ensure a robust and stable installation, supporting a load capacity of up to 70 kg per door (35 kg per trolley).
No, the kit does not include the panels. It only provides the hardware, profiles and accessories necessary for the assembly of the sliding door system.
The system uses top and bottom guides with ball bearings, which allows for smooth and quiet sliding. In addition, it has a 6 mm height adjustment for adjusting the position of the doors.
Yes, the system allows for subsequent adjustments thanks to the integrated adjustment of the carriages. This facilitates the precise alignment of the doors even after installation.
The system is designed to support doors weighing up to 30 kg, ensuring safe and stable operation.
No, the system uses 2.35 m anodised aluminium profiles that are identical for the top and bottom guide, simplifying installation.
The following video shows how you can easily install the aforementioned the Atom 14 multiconnector.
The system supports folding doors with loads of 20 kg and 25 kg per leaf. Compatible heights range from 1200 mm to 2700 mm, with panel thicknesses between 18 mm and 26 mm.
Yes, to be combined with the basic hardware kit, slide rails, vertical profile and, optionally, reinforcement profiles and centring strips.
No, the system uses a push-to-open mechanism, eliminating the need for handles. Opening is assisted and door adjustment is intuitive and accessible.
It includes pre-assembled components that speed up assembly, allowing for quick and precise installation. In addition, the system is designed to conceal the doors in the side of the cabinet or between walls.
Made of steel, aluminium and plastic, the system offers high strength, durability and a modern finish. Its design optimises the use of space while maintaining a clean aesthetic.
The bottom profile acts as a guide to prevent the doors from swinging and to ensure stable sliding. The centring devices ensure precise alignment of the doors during closing.
The bottom profile has a length of 1360 mm and each package includes one unit of the product, designed for easy installation in Folding Concepta3 systems.
Yes, the profile is compatible with board thicknesses between 18 mm and 26 mm, allowing it to be adapted to different sliding door configurations.
The centring devices align and stabilise the doors during movement, preventing lateral displacements and improving closing accuracy.
It is made of matt anodised aluminium, offering high wear resistance, long-lasting durability and an elegant design that complements the aesthetics of the Folding Concepta3 system.
Kit includes: 2 side metal ribs and mounting hardware.
It is designed for easy integration with Simplex drawer systems.
The ribs are made of high-strength steel, available in white painted and anthracite grey finishes.
Both finishes guarantee durability, corrosion resistance and aesthetic design.
The system is designed for drawers with a height of 86 mm and multiple depths: 290 mm, 340 mm, 400 mm and 440 mm.
Compatible with full-extension slides and Simplex soft close systems.
Yes, installation is quick and easy. No special tools are required. Just assemble the ribs with the slides and fix them to the front of the drawer with the included screws.
The system supports up to 35 kg per drawer, ideal for residential and commercial applications.
The container has a total capacity of 28 litres, distributed in two bins of 14 litres each, ideal for waste separation.
The kitchen module must have sufficient interior space for the system, with a manual pull-out in a 320 mm movement.
Yes, the system includes two 14-litre buckets, a common lid and a base for mounting, ensuring a perfect fit inside the cabinet.
The containers are made of durable grey plastic, guaranteeing durability and ease of cleaning.
Yes, this system is designed to be installed in hinged door modules and is suitable for kitchens with standard configuration.
In order to assemble a switch easily you need to adhere to the following diagram:
The following video shows how you can easily install the monochrome control with the LED light controller.
The long bracket 8 is an anchoring piece that secures the Gola profile to the kitchen unit, providing stability and safety in the installation.
It is made of high-strength grey plastic, guaranteeing durability and a perfect fit.
The number of brackets required depends on the length of the Gola profile. For a secure fixing, it is recommended to use at least two brackets per profile.
Yes, this bracket is compatible with boards of different thicknesses, including boards up to 19 mm thick.
Yes, you only need to press the MATCH button on the controller and the ON/OFF button on each remote to link it.
Yes, just press the MATCH button on each controller and the 1,2,3 or 4 buttons on the controller to link it.
One remote control can be linked to 20 LED controllers.
The Wirly sensor must be connected after the converter because it is a sensor that works at 12V DC or 24V DC.
The Optima Vantage cutlery tray is compatible with standard width module drawers of 600 mm and 900 mm, with a depth of 500 mm and 16 mm thick board.
Yes, the Optima Vantage cutlery tray can be easily trimmed to fit the specific dimensions of the drawer, providing a customised installation.
It is made of high-quality, hard-wearing grey plastic, designed for durability and ease of cleaning.
Yes, the material used in the cutlery tray is resistant to moisture and daily wear and tear, ensuring longevity in kitchen environments.
The cutlery tray design includes a precise fit to keep it stable inside the drawer, preventing movement during use.
Plasline extensions allow you to join and extend kitchen plinths, adapting to units of different heights and ensuring uniform visual integration.
They are compatible with 100 mm, 120 mm, 150 mm and 180 mm socket heights.
They are made of plastic and satin anodised aluminium, offering strength and a quality finish.
No, Plasline extensions come ready to install and do not require any additional adjustments or trimming to fit compatible sockets.
The packaging includes 10 extension units, ideal for large-scale kitchen projects.
The bottom protector is made of an aluminium foil and a plastic layer, which ensures strength and adaptability.
This protector is compatible with modules with a width of 600 mm, a depth of 580 mm and a board thickness of 16 mm.
Yes, the protector can be easily trimmed to fit other module sizes, allowing for customised installation.
The product is designed to prevent the accumulation of moisture and dirt in the base units, protecting the bottom of the cabinet from damage.
Thanks to its high-quality materials, the bottom protector is resistant to daily wear and tear, guaranteeing a long service life.
The following video shows how the sliding door system for wardrobes is assembled.
The Portland furniture knob is made of Zamak, a robust and durable material that guarantees a long service life.
In order to mount the sliders on doors it is possible to use different screw options, always bearing in mind the board thickness of the door:
- Euro screws. In this case it is necessary to machine a 5mm diameter hole into the door. For example, for a door thickness of 19 mm we will choose the code. 5044007 with a length of 17 mm.
- Self-tapping screws. They can have a 4mm diameter which do not require machining on the board. For example, for a board of 19 mm we will choose a 4 x 20 mm screw with the code. 8218605 or 5032405.
The Portland knob has a diameter of 24 mm, making it ideal for a wide variety of furniture.
The packaging includes a knob and an M4 screw for quick and easy installation.
Yes, the chrome finish is resistant to everyday wear and tear, maintaining its shine and elegant appearance over time.
The Portland knob is suitable for kitchen, bathroom, home and office furniture, offering versatility and modern design.
In order to secure the rails of the Space + sliding door system, it is recommendable to use 4 x 25 mm screws (code 5032505) for 16, 18 and 19 mm units.
For the assembly of Free Face profile hands for board of 19-20 mm alongside the Space+ sliding door system, it is necessary to choose an outside runner with a thickness of 30 mm and adhesive spacer cod. 4000820.
For the assembly ofFree Face 2 profile hands for board of 19-20 mm alongside the Space+ sliding door system, it is necessary to choose an outside runner with a thickness of 23 mm.
The Assen handle is made of acrylonitrile butadiene butadiene styrene (ABS), a strong and durable material that maintains its condition even in daily use.
The handle has a length of 164 mm, a gap of 128 mm and a height of 30 mm. Ideal for kitchen, bathroom and office furniture.
The handle has a black painted finish, which gives it a modern and elegant design.
Yes, the product includes the necessary M4 screws for safe and quick installation.
The packaging contains 25 units, designed for large-scale projects or series installations.
The Prague handle is made of zamak, a strong and durable material that ensures a long service life.
The following video shows how the sliding door system for wardrobes is assembled.
The dimensions of the handle are 195 mm overall length and 160 mm spacing, ideal for standard sized furniture.
The handle finish is painted aluminium, offering a modern and elegant design that adapts to any style of furniture.
Yes, the handle includes M4 screws, which are necessary for quick and accurate installation.
The packaging contains 20 units of Prague handles, perfect for multiple installation projects.
For the assembly of the Free poor alongside the Space + sliding door system, it is necessary to choose an outside runner with a thickness of 30 mm.
For the assembly of Adige handle profiles for 18 mm board along with the Space + sliding doors, it is necessary to choose an outside runner with a thickness of 23 mm.
The Haiti 76 handle is made of zamak, a material that provides strength and durability.
This model has a length of 125 mm and an interaxis of 76 mm, which makes it ideal for various furniture designs.
The handle has a vintage style, which combines perfectly with classic or traditional designs.
Yes, M4 mounting screws are included to ensure correct and easy installation in drawers or furniture.
The handle is available in an elegant bronze finish, which highlights its vintage and sophisticated design.
The handles of the Torrent range are made of matt anodised aluminium, offering a modern design and high durability.
The dimensions of each handle are 120 mm in length, with an interaxis of 96 mm, suitable for multiple applications.
The set includes 10 handles and is available in matt anodised finish, ideal for kitchen, bathroom or office furniture.
M4 screws are included with each handle to ensure correct and easy installation.
Yes, the handles can be installed both horizontally and vertically, adapting to the needs of the furniture.
Although the he adjustable, visible, hanging Neco sliding system allows for a maximum door thickness of 30 mm, the fittings and profiles of the Free aluminium door do not allow for the assembly of this sliding door system.
The Verona knob has a diameter of 25 mm, offering a compact and modern design.
It is made of aluminium with a matt anodised finish, guaranteeing durability and resistance to corrosion.
The package includes a knob and the screws necessary for correct installation.
It is suitable for kitchen, bathroom, home and office furniture, as it combines functionality and aesthetics.
Each knob is individually packed to avoid knocks and scratches during transport.
The following video shows how the sliding door system is assembled.
No, with this system it is very important to respect the maximum and minimum door measurements, as well as the relationship between the breadth, height and weight of it. To do so, you need to consult the following table:TH = Door height, TB = Door breadth, Result = Maximum door weight for the indicated dimensions.Example: Door dimensions 2000 x 850 (THxTB) so Maximum door weight = 23 kg, although the system is for a max 30kg/door.
No, with this system it is very important to respect the maximum and minimum door measurements, as well as the relationship between the breadth, height and weight of it. To do so, you need to consult the following table:TH = Door height, TB = Door breadth, Result = Maximum door weight for the indicated dimensions.Example: Door dimensions 2.000 x 850 (THxTB) so Maximum door weight = 23 kg, although the system is for a max 30kg/door.
The Algemesí handle is made of aluminium with a matt anodised finish, which guarantees durability and a modern appearance.
The distance between the fixing points is 128 mm, a common standard for easy installation.
Yes, the Algemesí handle is designed to be installed both vertically and horizontally, depending on the needs of the design.
The lot includes 25 Algemesí handles, each accompanied by M4 screws for installation.
Each handle is individually packed to avoid scratches and knocks during transport.
The following video shows how the sliding door system is assembled.
You can mount a handle using the Folding Concepta system always on the door on the other side to the installation.Also, the handle needs to have a centred position in terms of height and be close to the folding area.Example of a mounting system on the left with a handle.
The following video shows how the sliding door system for wardrobes is assembled.
The handles are made of hollow stainless steel with a black painted finish, ensuring durability and a modern design.
Yes, the handles can be installed either horizontally or vertically, depending on the needs of the furniture.
The set includes 10 handles and the M4 screws required for installation.
Each handle has a length of 220 mm and an interaxis of 160 mm, adapting to different furniture designs.
The handles are individually packed to avoid scratches and to ensure their quality during transport.
The Kansas handle is made of zamak with a satin nickel finish, giving it a modern and durable design.
Yes, the handle can be installed either horizontally or vertically, depending on the needs of the furniture.
The package includes 1 handle and the M4 screws required for installation.
The handle has a length of 140 mm and a 96 mm spindle, ideal for various types of furniture.
The handle is individually packaged to avoid scratches and ensure it arrives in perfect condition.
The Veracruz handle is made of zamak with a matt chrome finish, which gives it a modern design and high durability.
Yes, this handle can be installed either horizontally or vertically, depending on the needs of the furniture.
The package includes 1 handle and M4 screws for installation.
The handle has a length of 150 mm and a spindle of 128 mm, perfect for different types of furniture.
Each handle is individually packed to protect it from knocks and scratches during transport.
The Casablanca handle is made of zamak with an elegant antique gold finish, combining classic design and durability.
Yes, this handle can be installed both horizontally and vertically, adapting to the needs of the furniture.
The package includes 1 Casablanca handle and M4 screws for installation.
The handle has a total length of 116 mm and a 96 mm spacing, ideal for various furniture applications.
Each handle is individually packed to avoid scratches or knocks during transport and handling.
The knobs have dimensions of 20x20 mm, ideal for drawer fronts and wardrobe doors.
The knobs have a chrome finish for a modern look and high resistance to everyday wear and tear.
Yes, the set includes M4 screws necessary for the installation of the knobs, facilitating the assembly.
These knobs are ideal for kitchen, bathroom, home and office furniture, adapting to different styles and environments.
Each knob is individually packed to avoid knocks and scratches during transport and storage.
The following video shows how the sliding door system for wardrobes is assembled.
The following video shows how the sliding door system for wardrobes is assembled.
The RAL number of the white finish on the rails and handles of the Placard sliding door system is approximately 9003.
The RAL code of the anthracite grey finish is approximately 7043.
The RAL code of the black finish is approximately 9011.
What is the total length and the spacing of the handle for Riad furniture?
The following video shows how the sliding door system for wardrobes is assembled.
It is made of aluminium with a bronze finish, ensuring durability and style.
The handle can be installed in horizontal or vertical orientation, offering versatility for different types of furniture.
It includes M4 mounting screws, which are suitable for easy and firm installation on multiple surfaces.
Yes, it is designed to withstand frequent use and is ideal for kitchen, bathroom and office furniture, even in demanding environments.
The set includes 20 handles, each with a 224 mm spindle, ideal for a wide range of applications.
The available finishes for the handles are chrome, black painted and satin nickel, offering modern and elegant options.
Yes, the Zagreb handle can be installed in both horizontal and vertical orientation, adapting to different furniture designs.
The package includes M4 screws, ideal for firm installation in doors with different standard thicknesses.
Each handle is individually packaged to avoid knocks and scratches during transport and storage.
The Pasadena handle has a 180 mm spindle and a total length of 240 mm.
It is made of steel with a textured black finish, giving it durability and a sleek design.
Yes, it is necessary to drill holes on the outside of the door to attach the handle correctly. The design facilitates a comfortable and secure grip.
It is compatible with wooden doors between 35 and 45 mm thick, designed for sliding door systems.
The kit includes an exterior handle, mounting plate and screws, all individually packaged to prevent damage during transport.
The Turin handle has a length of 106 mm and a 96 mm spindle, making it ideal for most standard furniture.
It is made of zamak, a strong and durable material with a modern and elegant finish.
Yes, the handle's design allows it to be installed in either horizontal or vertical orientation, depending on the user's preference.
The package includes a handle and M4 screws for mounting, with individual packaging to protect the product during transport.
The Turin handle is available in black painted and satin nickel finishes, adapting to different decorative styles.
The Slowmove soft closing system for Placard can be assembled on 2-door and 3-door wardrobes: For 2-door wardrobes you can install Slowmove soft closing on the opening as well as the closing of all the doors. However, on 3-door wardrobes you can install Slowmove soft closing only on the outer door for opening. For closing, it can be installed on all of the doors (inside and outside) depending on the closing movement.
We can put a smooth closing device on the opening and a code 6102021 brake on the door closure. This will make sure the central door is not loose when closed or open.
For a complete installation, the top and bottom rail of the Glider sliding system must also be available, as the brake is integrated into these components.
The brakes are made of high-quality technical plastic, which guarantees mechanical strength, dimensional stability and a long service life even in frequently used environments.
Its function is to cushion the closing of the sliding door, avoiding sudden knocks, protecting the furniture and offering a quieter and more controlled closing.
The minimum recommended width that a door should have in order to mount soft Slowmove closing for Placard is 650 mm.
Yes, the kit includes 2 brakes and an Allen key, allowing installation at both ends of the sliding door for symmetrical operation.
The Glider braking system is designed to work in conjunction with the top and bottom rails of the Emuca Glider sliding system, ensuring full compatibility within the range.
The profile has a height of 50.6 mm and a width of 28 mm, optimised for a firm hold of the cabinet top and smooth running of the trolleys.
It is designed to be installed at the top of the cabinet interior, ideal for hanging sliding door configurations. Compatible with Neco 1 and 2 door systems.
The rail is manufactured from extruded aluminium with a matt anodised finish, ensuring friction resistance and durability in demanding environments.
Yes, the current Ø50mm channel slider can be used with the new Placard 74 system but the gap for housing the upper and bottom rail needs to be increased from 74 to 77 mm in order to prevent the slider interfering with the inner divider or dividers.
Hanging Neco trolleys incorporating ball bearings are used for quiet and effortless movement along the double slide channel.
The profile is mechanically fixed into the module by means of screws, ensuring a stable fixation for panel thicknesses between 16 and 23 mm (depending on the trolley system).
This rail is designed for top supported installation, fitting directly onto the module without the need for machining or screw fixing. It is compatible with Neco concealed sliding systems.
The rail has a "T" shape with a height of 52 mm on one side and 56 mm on the opposite side. The width of the profile is 32 mm, and its total length is 2.35 m.
It is compatible with Neco sliding door trolley kits and the Soft Neco mechanism. These components slide in the track channels quietly and efficiently.
The following video shows how the sliding door system for wardrobes is assembled.
Yes, the profile is made of extruded aluminium, so it can be easily cut to size with suitable tools, maintaining a clean finish to ensure the functionality of the system.
The natural aluminium finish offers a durable, corrosion-resistant surface with excellent gliding properties. Its neutral aesthetic makes it ideal for integration into modern or technical cabinets.
It is designed for external sliding doors with installation on the top track supported by the Neco system. It is suitable for both built-in wardrobes and dressing rooms with a wooden structure.
The soft-close mechanism is installed in the top of the enclosure, operating when the door's final travel is actuated. The system is concealed in the top profile without interfering with the exterior design.
It includes metal components in steel with a zinc-plated finish for maximum strength, and precision plastic parts in white to guide the frictionless closing and prevent damage to the structure of the furniture.
In order to get the door to sit flush with the unit, with the Gilder sliding system, you need to take into account the dimensions of the following diagram:
It provides a soft and silent closing, protecting the structure of the furniture and avoiding sudden knocks when closing. It also improves the feeling of quality perceived by the end user.
This kit is designed for a single external door. For projects with more leaves it is necessary to purchase a kit for each unit to be installed.
It is designed for wall mounting the top rail of the Railway system on suspended sliding doors. It is particularly useful when it is not desired to fix the rail to the ceiling or when a solution with a visible and accessible finish is required.
Yes, its design has been optimised to fit perfectly with the top rails of the Railway system, allowing a firm and stable fixing of the top profile to the wall.
The bracket measures 43.3 mm wide × 63.5 mm high. It is made of aluminium with a matt anodised finish, offering durability and a modern and uniform aesthetic with the rest of the elements of the system.
It is installed by screwing directly to the wall. The system is fast and safe, and also allows the subsequent assembly of the front covers to conceal the fittings and improve the aesthetics.
The packaging contains 5 individual anchors, ready to be used together with the Railway system and the corresponding profiles and covers.
The Neco rail can be installed on melamine, MDF or chipboard surfaces. The use of structural adhesive or appropriate screws is recommended depending on the type of support. The base of the rail allows a flush fit to the bottom of the module, optimising the visual finish and the stability of the assembly.
This track is specifically designed for the bottom guide sliding door system and is compatible with the Emuca Placard model door system. It must be used in conjunction with a top profile and bottom wheels that fit into the 15mm wide channel of the track.
Combined with the Placard system components, this rail can support a load of up to approximately 50 kg per door, provided that the recommendations for mounting, wheel centring and module levelling are observed.
The rail is made of matt anodised aluminium, which provides excellent resistance to corrosion, scratching and frictional wear. This makes it a durable choice for heavy duty applications in both domestic and contract environments.
Each package includes 8 units of rails, each with a length of 2.35 metres. This makes it easy to optimise cutting and assembly in large volume projects or industrial installations.
The following video shows how the sliding door system for wardrobes is assembled.
The selection is made according to the door weight. There are two soft closing ranges, one for doors up to 8 kg and one for doors from 8 to 16 kg.
The Clipo 15 system is designed for completely concealed installation, without the need for visible machining on the outside of the furniture. This makes it an ideal solution for kit furniture or minimalist design, where clean aesthetics and no exposed hardware is a priority.
Thanks to its compatibility with thicknesses between 16 and 19 mm and its load capacity of up to 15 kg per door leaf, it is an optimal choice for lightweight doors in melamine, MDF or thin plywood, without compromising the stability or smooth gliding of the door.
The press-fit assembly allows for quick and error-free installation, reducing time on production lines and on-site assembly. In addition, it eliminates the need for specific tools, which favours its use in modular or DIY furniture.
Yes, the Clipo 15 does not interfere with the installation of LED strips, light profiles or opening sensors, as all components are concealed in the upper part of the module. This makes it particularly attractive for functional furniture projects with integrated technology.
The Clipo 15 allows a height adjustment of ±1.5 mm by means of its integrated adjustment system. This functionality is key to correcting minor deviations after installation, ensuring perfect alignment between doors and interference-free closing.
The following video shows how the sliding door system for wardrobes is assembled.
No, it is not possible, as it is a symmetrical piece of furniture and it would not be able to open properly.
Its compact design hides the soft close inside the rail, offering a damping system without visual impact. This makes it an ideal solution for spaces where clean, minimalist design is key, without sacrificing the functionality of assisted closing.
The doors must be machined at the top edges to accommodate the carriage and the embedded damping system. No visible front perforations are required, which improves the aesthetics of the assembly and speeds up the series production process.
It is essential to reinforce the false ceiling structure with a wooden or metal substructure to support the load of the track and door. The system must be fixed to continuous structural elements, not directly to the plasterboard, to ensure safe and stable operation.
No, the measures come predefined, according to your chosen range of sizes.
The soft close is optimised for doors up to 40 kg and minimum door thicknesses of 35 mm. Using lighter or thinner doors may decrease the braking efficiency, while heavier doors require the top version of the kit or an additional reinforced latch.
Yes, the system allows integration with automation solutions using magnetic or presence sensors, as its mechanical operation is silent and does not interfere with electronic devices. It is ideal for smart architecture or advanced retail projects.
Allows 2 folding sliding doors to be integrated into a small space without the need for a visible bottom rail. The soft closing system optimises the user experience in tall cupboards or integrated in laundry, kitchen or utility rooms, allowing full access without frontal interference.
The new guide profile has been redesigned to provide precise soft closing without the need for counterweights or external mechanisms. This reduces the space required, improves the lateral stability of the blades and eliminates the end stroke common in non-braked systems.
It is recommended to use boards between 16 and 19 mm thick, with good structural rigidity. Clean milling is essential to accommodate hinges and hardware, and close tolerances must be maintained to ensure correct alignment of carriages in combined movements.
Yes, the system is optimised for workshop or on-site assembly using standard tools. The elements fit precisely thanks to templates or visual references that allow manual marking without the need for industrial tooling.
Avoid accumulation of dust on the profiles and check the condition of the brake annually. No lubrication is required if kept clean, but in wet or heavily used areas it is recommended to apply dry lubricant preventively to the piston contact areas.
As it is fully integrated into the module, it improves the aesthetics of the furniture as there are no visible profiles. It also reduces the accumulation of dust or dirt in accessible areas, ideal for high-end furniture, integrated kitchens or minimalist design spaces.
The profile is specifically designed to accommodate the wheels of the Neco trolley set, guaranteeing precise, backlash-free guidance. The geometry adjustment avoids vibrations, allowing smooth running even in modules with tight tolerances.
Yes, it can be cut with an aluminium mitre saw. It is recommended to make a clean cut, deburr the ends and avoid deformation in the wheel contact area. This ensures that the bearing continues to work without interruption or jamming.
Its load capacity, combined with the Neco trolleys (up to 50 kg), makes it perfectly suitable for high or frequently used doors. It is made of high-strength extruded aluminium and maintains its shape under prolonged stress without deforming.
The track is compatible with Neco brake systems designed for interior integration. These are housed directly in the rail without affecting the wheel pitch. This allows an invisible design to be maintained without sacrificing the functionality of the soft close.
The following video shows how you can easily assemble the Luxe supports.
The following video shows how you can easily assemble the Luxe supports.
These castors are perfect for occasional furniture, filing cabinets, mobile pedestals, service trolleys or mobile tables. Their discreet design and grey rubber tread make them suitable for both office and home environments where functionality and neutral aesthetics are sought after.
The recommended layout is to mount the 2 braked castors at the front (user accessible side) and the 2 non-braked castors at the back. This allows easy immobilisation of the furniture when in use and freedom of movement when it needs to be moved.
The rubber reduces the noise level when moving, improves grip on the floor and prevents scratches on delicate surfaces such as parquet or vinyl. It also provides a smoother ride, ideal for indoor areas with frequent traffic.
We recommend the use of wood screws with a coarse thread Ø4 mm and a minimum length of 16 mm. The assembly must be carried out on rigid structures of the furniture, such as drawer bottoms or base reinforcements. An electric screwdriver with torque control will facilitate assembly without damaging the material.
With a capacity of 30 kg per castor and a metal axle with glide bearing, this lot is ready for frequent moves. It is ideal for furniture that requires regular mobility without compromising stability or component wear.
This M10 leveller can be installed on furniture with melamine, solid wood, aluminium or steel frames that have an internal thread or are prepared to receive an M10 threaded bushing or threaded sleeve. It is ideal for cabinets, display cabinets, counters and support furniture.
The overall height can be adjusted from 67 mm to a minimum of 51 mm thanks to the metric M10 thread. This adjustment is sufficient to correct unevenness of up to 16 mm on uneven floors or to adjust the levelling between adjacent modules.
Yes, thanks to its sturdy plastic base and chrome-plated steel rod, this leveller withstands high loads and is suitable for installations in shops, offices, kitchens or even technical showroom furniture. The circular base distributes the weight evenly without marking the floor.
The following video shows how you can easily assemble the Luxe supports.
Installation can be done from the inside of the cabinet using a hexagon spanner or from the outside with a flat tool if the design allows. Adjustment is accessible even when the cabinet is in a vertical position, facilitating on-site installation.
This model is optimised for spaces where the base of the unit has reduced contact with the floor or a more discreet solution is required. Its 43 mm base provides good support on even floors without invading too much visual or functional space.
According to the ISO standard: 7170:2005 Emuca supports can take a maximum weight of 40 kg per metre evenly distributed.
The following video shows how the Even truss is assembled.
The M6 circular leveller Ø35x14 is suitable for heavy duty furniture in contract, hospitality, kitchen and office environments, thanks to its reinforced plastic base and M6 steel screw that provides resistance to medium loads and absorbs small irregularities in the floor.
The aluminium painted finish offers excellent aesthetic integration in furniture with anodised aluminium profiles, metal structures or technical furniture plinths, as well as corrosion resistance in humid environments.
This leveller can be installed both on wooden structures and on M6 threaded metal bases. For metal structures without internal thread, the use of compatible threaded bushes or inserts is recommended.
This leveller is available in three screw heights: 20 mm, 35 mm and 45 mm. This provides an adjustment range between 8 and 15 mm depending on the model, allowing uneven floors to be compensated for without affecting the stability of the furniture.
For applications on chipboard, pre-drilling and the use of M6 metal inserts is recommended. The tightening torque should not exceed 2.5 Nm to avoid damaging the thread. The use of screwdrivers with adjustable clutch is recommended.
The following video shows how you can easily assemble the Sling wardrobe lifts.
The following video shows how you can easily assemble the Moka accessories.
The integrated ball bearings in the Mak wheels significantly improve the glide, allowing smoother, quieter and less stressful turning even under load. This translates into superior manoeuvrability and increased durability in heavy use.
With a diameter of 80 mm and a load capacity of 50 kg per castor, this batch is ideal for installation in mobile office furniture, storage trolleys, commercial displays or ancillary equipment in hotels and public areas.
The kit includes mounting screws for fixing to wood and derivatives (chipboard, MDF or plywood). For installation on sheet metal or structural steel, it is recommended to replace them with sheet metal screws or rivets as appropriate.
The 2 castors with brake incorporate a mechanical locking system that simultaneously stops the rotation and rotation of the support. The brake is operated from the outside of the castor, in an accessible position, guaranteeing total immobility of the furniture.
Yes, provided that the diameter and overall height are equivalent. However, to ensure homogeneous behaviour and uniform aesthetics, it is recommended to keep the same model (Mak) in all 4 mounting positions.
The following video shows how you can easily assemble the Hang Moka wardrobe lifts.
The Ledown leveller offers an adjustment capacity of up to 25 mm by means of an Allen key no. 4. This allows it to absorb manufacturing tolerances or floor irregularities, without altering the external aesthetics of the module thanks to its completely concealed installation.
Cylindrical machining with a diameter of Ø12 mm and a depth of at least 16 mm is recommended. The body of the levelling device is pressed into the side and rests on the lower base of the side, which ensures a direct load transmission.
Adjustment is made from the underside of the furniture using a standard Allen key no. 4. This system facilitates fine adjustment once the furniture has been installed, without the need to remove plinths or front panels.
Yes, its design allows adjustment from inside the plinth by means of a through hole or side recess. It is especially useful in kitchens or bathroom furniture where total concealment and accessibility from service areas is required.
Each leveller supports up to 250 kg. It is made of steel and zinc plated zamak, which ensures mechanical strength, dimensional stability and protection against corrosion in wet or exposed environments.
The wheel includes a square metal plate with countersunk holes for fixing screws. It is compatible with melamine, MDF or metal bases. The use of Ø4 to Ø5 mm countersunk head screws is recommended for a firm anchorage.
Yes, the tread is made of transparent thermoplastic rubber, ideal for vinyl, parquet or laminate floors. It provides a smooth and quiet glide without leaving marks or causing abrasion on sensitive surfaces.
This castor is designed for loads up to 40 kg per unit. For applications above this threshold, it is recommended to use wheels with a higher load capacity or to distribute the load over more wheels to ensure stability and durability.
The version with brake includes a locking mechanism that acts on the rotation of the wheel and the rotation of the axle, which provides greater security in fixed positions. The version without brake is ideal for furniture that requires maximum mobility without the need for locking.
Periodic cleaning of the shaft and tread is recommended to avoid accumulation of dust or fibres that may interfere with rotation. No lubrication is required, as the chrome-plated steel shaft and bearings are designed for long maintenance-free operation.
The following video shows how you can easily assemble the pull-out hanging rail Moka.
The Giotto leveller allows a precise height adjustment of up to 25 mm by means of a hidden nut located inside the module. This adjustment is easily carried out from inside the cabinet, ensuring an aesthetically pleasing installation with no visible elements from the outside.
Thanks to its body made of Zamak, an alloy of zinc, aluminium, magnesium and copper, the Giotto leveller withstands static loads of up to 90 kg per support point. This makes it particularly suitable for heavy-duty furniture, contract applications and large-format storage solutions.
The internal design of the Giotto allows it to be completely integrated into the base of the furniture, avoiding interference with skirting boards, baseboards or other external elements. This improves the visual cleanliness of the whole, facilitates maintenance and allows precise levelling without altering the design.
Yes, the Giotto leveller has been designed to fit standard bores of Ø15.3 mm and 10 mm depth, allowing a smooth integration into CNC production lines. Its compact design favours automated pre-assembly in industrial plants.
Zamak offers excellent resistance to compression and frictional wear, maintaining stable dimensions even under high loads. In addition, it is highly resistant to oxidation and humid environments, surpassing technical plastics and galvanised steel in terms of durability and dimensional stability.
Each Alumik X base is designed to withstand an approximate static load of up to 50 kg, depending on the weight distribution at the base of the unit. They are ideal for kitchen and bathroom base units or auxiliary furniture for domestic or low-demand commercial use.
Yes, they are made of high-strength ABS plastic and have a painted or chrome-plated finish to protect against environmental humidity. Their use is especially recommended for furniture exposed to the floor, such as kitchens and bathrooms.
No. Each foot includes fixing screws and its base is designed for direct installation with conventional screwing. The flat support surface and alignment of the holes facilitates mounting with standard tools, without the need for special jigs.
The height of each Alumik X foot is fixed, 80 mm from the base to the point of contact with the furniture. It is not a height-adjustable model, so it is recommended for use in level modules or with flat bases.
Yes, this mirror has 45 mm guides with bearings and a trigger for detaching it.It also has free rotation up to 180º so you can position it comfortably.It is easy and quick to install, without mechanisms, simply by screwing it into the unit. To make it even easier, it comes with the screws required for assembly.
The Alumik X design not only enhances the aesthetics of the cabinet with a modern profile, but also offers greater structural stability thanks to its wide base. This shape also facilitates ventilation underneath the cabinet and allows for better weight distribution.
The slider lugs fit perfectly into bores of ø5 mm and a minimum depth of 6 mm. This tolerance ensures secure fixing without the need for additional screws, which facilitates mounting in industrial environments.
This model with lugs allows quick assembly by pressure, reducing installation times by up to 40%. In addition, it avoids the use of visible screws, ideal for furniture with a clean or modular design.
Thanks to its low friction and high resistance plastic base, it is especially recommended for ceramic, laminate, vinyl and varnished wood floors, where it provides a smooth and silent glide.
Made of high-density technical polymer, this glide withstands more than 30,000 movement cycles without visible deterioration. Ideal for drawers, occasional furniture or frequently used furniture.
The design is optimised for horizontal applications (furniture bases), but can also be installed vertically in guide or support applications if the housings are reinforced with technical dowels or metal inserts.
The RAL of the finish of the accessories for inside Moka wardrobes and dressing rooms is approximately 8019.
Yes, it is only necessary to cut the cross profiles of the Keeper frame with a straight cut. In this manner you can attain an inside width of the unit less than 555 mm.Afterwards, it will be necessary to bear in mind the new measurement of the frame in order to add the different accessories such as baskets, drawers and trouser racks.
The large diameter plastic base (Ø60 mm) distributes the load efficiently, protecting delicate surfaces such as wooden or vinyl flooring. The M10 stem ensures precise and robust adjustment, ideal for heavy furniture or intensive use.
This leveller supports up to 100 kg per unit, depending on the type of floor and correct installation. On hard floors such as concrete or tile, maximum performance is achieved. On soft surfaces, additional underlay reinforcement is recommended.
Yes, it is compatible with M10 wood insert nuts. It is advisable to use reinforcement sleeves or insert nut with structural adhesive to improve tensile strength in low density panels.
This leveller allows adjustment of up to 25 mm, offering an effective solution for uneven floors. The wide base design helps to maintain lateral stability, even on tall or narrow furniture.
Yes, the Self trouser holder stands out for its ease of installation and because it can change sides easily. In order to change the position of the trouser holder it is only necessary to unscrew the central body and separate it from the runners in order to change side, and unscrew the cylindrical handle and put it on the other side.This trouser rail incorporates 37 mm full-extension ball bearing runners with a gentle sliding movement and a handle for pulling out of the furniture. Also, it has eleven chrome steel bars with non-slip rubbers for hanging trousers on.
The matt chrome surface treatment provides medium corrosion resistance. For applications in humid environments or protected exteriors, it is recommended to reinforce with a plastic washer or to use versions with specific anti-corrosion coating.
According to the ISO: 7170:2005 standard, the bracket for circular hanging bars or round tubes can tolerate a maximum weight of 40 kg/metro uniformly spread out.
The shelf support for a gap slot of 32 mm has two through holes, which enable access through a screw and a manual tool. This makes it possible to fasten the board if that is required, especially in assemblies with very wide continuous shelves.
The following video shows how the sliding door system for wardrobes is assembled.
The following video shows how you can easily assemble the Vertex drawer.
According to the number of doors that comprise your wardrobe you can choose between different types of Free aluminium vertical profiles (A, B or C) to obtain different combinations of doors.
Type A. Central door used to create wardrobes with three doors. Created with two handle profiles.
Type B. Outer door used to create wardrobes with two or four doors. Created with a handle profile and a handle cover profile.
Type C. Inside door used to create wardrobes with two or four doors. Created with a vertical profile and a handle profile.
The following sketch shows details of the machining that should be carried out for the bracket of the Plus 4-4E-11-16-18 aluminium profiles.
The Twice Top system allows a longitudinal displacement of a surface on a kitchen island or peninsula, offering a functional and discreet sliding support solution.
Enables the extension of a surface area up to 1200 mm with module widths from 600 to 900 mm.
The Twice Top system offers a load capacity of up to 60 kg, ideal for everyday tasks on kitchen work surfaces or auxiliary work.
Yes, the slides are equipped with a locking system that prevents accidental opening, ensuring greater safety during use.
Includes matt anodised aluminium slides, mounting screws, instructions, and all necessary hardware for correct installation. Top panel not included.
Each castor can support up to 25 kg, allowing a total load of 100 kg per kit, ideal for office or bedroom drawer units with moderate weight.
These castors are mounted by means of an M8 threaded bolt, which facilitates direct and secure attachment to the furniture without the need for additional plates.
No, this specific model consists of 4 wheels without brakes. It is ideal for applications requiring free and continuous movement.
They are designed to provide a smooth and quiet glide, ideal for environments such as offices and youth dorms where noise-free mobility is valued.
The castors are made of steel and black plastic, providing good resistance to continuous use and a discreet, professional aesthetic.
The following sketch shows details of the machining that should be carried out for the bracket of the Plus 7 aluminium profiles.
These square legs are designed for kitchen, home or office tables. Thanks to their 50x50mm steel section, they offer a robust and aesthetically pleasing solution for both residential and professional applications.
The set contains 4 legs, 4 connecting plates, 4 screws for plate/leg connection and 21 screws for board/plate connection Ø5x25mm, facilitating a quick and complete installation without the need for additional parts.
The steel plate connection system allows the final position of the legs to be adjusted, facilitating their alignment with the tabletop and providing greater structural rigidity to the assembly.
The legs are available in white or black painted finishes. In addition, they incorporate adjustable plastic end caps that allow them to bridge small unevennesses in the floor, preventing wobbles and damage to the surface.
The 50x50mm square profile steel provides high mechanical strength and a robust, modern aesthetic, making it an ideal choice for work tables or areas of intensive use.
The kit consists of 4 legs of section 50x50mm, 4 crossbars of length 650mm, 8 screws M8x15mm and 8 union screws 40x35 board, including everything necessary for installation without the need to purchase additional parts.
The following video shows how you can easily to adjust the Vertex drawer.
The 650mm crossbars provide a sturdy and stable structure for work tables, allowing precise and rigid assembly, compatible with different table top sizes within their limits.
Yes, thanks to the structural system composed of steel beams and legs, this model is compatible with modular structures, ideal for customised furniture projects or contract installations.
Yes, the legs are equipped with plastic end caps that act as an aesthetic finishing touch and allow the furniture to be levelled to correct small unevennesses in the floor, preventing wobbles.
Both the legs and the crossbars are made of steel, which guarantees structural strength. The finish is available in white or black paint, ideal for integration in kitchens, offices or technical desks.
No, this base is press-fitted directly onto the Bone riser without the need for additional tools, making it quick and easy to assemble in industrial or modular kitchen environments.
The following video shows how you can easily assemble the abovementioned storage system in a kitchen.
Yes, it is compatible with the Noline and Plasline socket ranges, allowing secure integration with their respective socket front fixing clips.
The side wings guarantee a stable hold of the modules, especially when used in combination with feet and plinths, preventing unwanted shifting in technical furniture installations.
The base has 10 Ø10 mm drill holes that allow additional fixing to the module when greater stability is required or for applications requiring specific fastening standards.
Yes, with its large footprint and direct attachment to the Bone foot, it is suitable for both plinth installations and furniture solutions without a visible bottom plinth.
The bracket is designed to accommodate glass shelves with glass thicknesses between 6mm and 10mm. The clamping system with lugs provides a firm fit, provided the glass thickness is within this range and the edge has been bevelled or tempered for safety.
No, this bracket allows direct installation without the need to drill holes in the shelf. Adjustment is made by pressure and contact with the nickel-plated steel plug, which fits firmly under the shelf, preventing displacement during use.
Although it has been specifically designed for glass, it can be used with melamine or wood shelves with rounded edges up to 10 mm thick. In these cases, however, it is advisable to carry out prior fixing tests to check the stability of the assembly.
For 16 mm panels, the use of 4 x 16 mm screws with chipboard or melamine thread is recommended. It is important not to over-tighten, as this could deform the bracket or damage the nickel-plated coating. In industrial installations, the use of screwdrivers with torque limiters is recommended.
It is recommended to use a Ø5 mm drill bit to ensure precise insertion of the Euro screw. The drill hole should have a minimum depth of 11 mm and should be drilled to tight tolerances to avoid looseness or breakage of the material.
This screw is optimised for wood-based materials such as chipboard, MDF or melamine. Its design allows for strong fastening without the need for metal inserts, making it ideal for quick assembly of demountable furniture.
Emuca Euro screws are manufactured to DIN standards and meet TSCA Title VI assembly system strength requirements, offering maximum compatibility with modular structures in kitchen and office furniture.
The ideal torque for this screw is between 3.5 and 4 Nm. It is recommended to use torque-controlled screwdrivers to avoid head deformation or damage to the fastening material, especially in low-density boards.
The zinc plated finish provides superior corrosion protection and improves screw adhesion in porous materials. It is ideal for applications in humid environments or furniture that require a long service life without surface rust.
The Fix 20 coupling secures and holds in position the Fix Ø20 model bolts within the joint system, achieving a firm and durable joint between the furniture panels.
This coupling is available in two versions: one for 16 mm boards with 8 mm infeed dimension, and one for 19 mm boards with 9.5 mm infeed dimension, optimising its adjustment according to the thickness of the furniture.
The nickel-plated finish on zamak offers corrosion resistance and a uniform metallic appearance, ensuring the durability of the component even in environments with moisture or heavy use.
The coupling is installed in a recess 8 mm high and 20 mm in diameter, pre-machined in the panel. Its insertion is precise thanks to the tight tolerances and standard dimensions of the fitting.
The Fix 20 coupler is supplied in packs of 1,000 units, ideal for manufacturers, assembly plants or distributors who work with large volumes and require efficient replenishment of technical fittings.
The M4 nut connection system is designed to fit into a drill hole with a precise diameter of 8 mm, which guarantees a firm hold in wooden or chipboard panels.
The knurled design of the outer surface allows for increased friction during drawing, which prevents the nut from turning during tightening of the bolt, ensuring a solid and reliable mechanical connection.
Installation should be by direct pressure on a precisely drilled hole in the panel. The press fit is key to maintaining axial alignment and avoiding displacement.
This system is ideal for furniture applications where internal fixing is required that is not visible, such as demountable structures, concealed joints or lightly loaded accessory brackets.
The M4 nut connector system is supplied in an industrial packaging of 2000 units, making it easy to handle and replenish for large-scale installations or assembly lines.
It is recommended to use a 5 mm diameter drill bit to ensure a perfect fit of the plug into the wood or board, without the need for additional adhesives.
The grooves allow for a tighter and more secure fit in the orifice, preventing displacement with continued use and facilitating a more efficient retention function.
Yes, it is designed to also act as a light impact absorber, reducing noise and protecting the furniture from wear and tear due to frequent closing.
The plug is compatible with melamine boards as well as solid wood or MDF, provided the bore is clean and of the correct diameter.
The product comes in packs of 1000 units, which makes it ideal for mass production projects, modular furniture or large-scale installations.
The Evo bracket is fixed by means of a bolt to be embedded in a Ø5 mm truss, which allows a quick assembly without specific tools, ideal for modular shelving applications.
It is designed to accommodate glass shelves with a thickness of 6 to 8 mm, and includes a rubber protection on the top face to prevent slippage and damage to the glass.
The following video shows how you can easily to disassemble the Vertex drawer.
Yes, it incorporates a locking mechanism with a plastic screw at the bottom that presses the glass from below, ensuring a firm hold even in environments with movement, such as bathrooms or kitchens.
Thanks to its firm fixing system and robust design in nickel-plated Zamak, the Evo bracket is suitable for hanging shelves, display cabinets or furniture exposed to moderate vertical stresses.
The nickel-plated finish not only provides a modern, shiny aesthetic appearance, but also improves resistance to oxidation and wear, prolonging the life of the bracket in humid environments.
The following video shows how you can easily assemble the abovementioned storage system in a kitchen.
The bracket is designed to accommodate glass shelves up to 5 mm thick and is fitted with a metal screw and a plastic clamping piece to ensure a firm hold without damaging the material.
The bracket has a machined lower metal screw hole, which allows precise and secure mounting on vertical panels, ideal for display cabinets, bathroom furniture or sideboards with glass shelves.
Yes, thanks to the pressure screw and the tilting design of the inner plastic part, the glass can be removed without removing the support from the cabinet, facilitating maintenance or cleaning.
Nickel plating provides resistance to oxidation and improves the durability of the bracket in humid environments such as bathrooms or kitchens, as well as offering an aesthetic finish compatible with chrome plated fittings.
Due to its compact design and independent fixing, it is ideal for modular systems with interchangeable or adjustable shelves, offering flexibility for mounting on metal or wooden structures.
This bolt is specifically designed to achieve invisible and structurally sound joints in bed, wardrobe and kitchen unit assemblies. It is ideal for use in configurations that require maximum strength with no visible elements on the outside of the furniture.
The solid bolt has a diameter of 6 mm and a total length of 33 mm, making it easy to mount in robust structures. In addition, it has an M6 thread and is installed in a ø6 mm hole, offering precision and strength.
It is optimised to work in conjunction with K12 cams, ensuring a firm and stable hold on heavy duty furniture. This combination allows for concealed internal fastenings without compromising the aesthetics of the design.
The zinc-plated finish provides a protective coating against corrosion and rust, making it ideal for wet environments or kitchens. This treatment prolongs the life of the hardware and maintains its functionality in demanding conditions.
The solid bolt comes in boxes of 2,500 units, which allows for efficient stock management in industrial operations and large assembly lines, reducing logistics costs and optimising production times.
The screws are designed with a flat Allen head that requires the use of a hexagon socket spanner. This configuration ensures efficient torque transmission and secure installation without damaging the head.
The zinc plated finish provides a layer of protection against corrosion and rust, ideal for furniture that is installed in damp or high traffic environments. This treatment also improves the durability of the screw over time.
They are specially designed for joining furniture accessories and components. Thanks to their self-tapping capacity, they allow quick assembly without the need for pre-drilling, optimising production times.
The screws have a thread diameter of 3 mm, which makes them ideal for precise fastenings in wood and wood-based materials. This standard diameter ensures compatibility with most fittings and brackets in the furniture industry.
The 500-unit batch presentation allows for efficient inventory management, reducing the need for frequent replenishment. It is ideal for manufacturers, wholesalers and distributors who require consistent volume for assembly lines.
The triangular design of the fastener allows secure mounting at the corners of skirtings, providing greater structural rigidity in corner areas. Its geometry is optimised for angled fixings, maximising strength and reducing torsional stresses.
The fastener is installed by means of a hole through the centre of one of its faces from side to side. The piece is inserted into the plinth by means of pressure or screws, using the through hole to attach it to the frame or base of the furniture.
The internal steel structure provides mechanical strength, while the white plastic coating prevents friction noise and enhances the aesthetics of the finish. This combination ensures durability without compromising the visual appearance.
It is especially recommended for fixing skirting boards in modular kitchens, bathroom furniture or cabinet systems that require a discreet and firm solution in corners or corners. Its pre-assembled design makes it ideal for quick assembly on production lines.
The product is delivered in packaging of 1000 units, which makes it highly efficient for automated assembly lines or large installations. This volume minimises logistical disruptions and optimises installation costs per unit.
The Pozidriv design provides a better engagement between the screwdriver and the screw, reducing the risk of slippage or wear during installation. This improves accuracy and safety in repetitive assembly or with power tools.
Only a Pozidriv 2 compatible screwdriver is required for secure installation. No pre-drilling is necessary, as they are designed for direct fixing on wooden parts with a 5 mm diameter pre-drilled hole.
These screws are suitable for connecting furniture fittings, especially in structures where a firm and stable fixing is required without the need for nuts or inserts. They are ideal for quick pre-assembly on production lines.
The screws have a diameter of 6.2 mm and a total length of 13 mm, offering an optimum balance between penetration and strength for general purpose use in wood or chipboard up to 19 mm thick.
The zinc-plated finish provides additional resistance against corrosion and rust, which is essential in humid environments or to extend the life of hardware in assemblies exposed to variable conditions.
This system is designed for boards at least 16 mm thick, providing a secure fixing for shelves in cupboards, kitchens or general furniture.
The couplings require Ø20 mm holes with a minimum depth of 12.5 mm, ensuring a precise fit without compromising the structural integrity of the board.
The hitch is made of nickel-plated zamak, while the bolt is made of turned steel with a zinc-plated finish, a combination that ensures rust resistance and long-term durability.
The kit includes bolts of 8 mm and 11 mm in length and 6 mm or 8 mm in diameter, allowing for different mounting configurations depending on the design of the furniture or shelf.
The set contains 20 couplings and 20 bolts, presented in a format ideal for professional installations or mass production, with a nickel-plated finish for uniform aesthetics and corrosion protection.
The Hook system is certified according to UNI 16776 standard to support up to 70 kg per set of hangers, guaranteeing safety and reliability in kitchen, bathroom or household overhead units.
It offers a height adjustment of 15 mm and a depth adjustment of 43 mm, which facilitates the precise alignment of the module with the wall and the levelling between adjacent modules, optimising the assembly process.
The set of 5 kits contains: 5 right hangers, 5 left hangers, 5 right covers, 5 left covers, 5 mounting brackets and the necessary screws for fixing, allowing up to 5 modules to be fitted.
The included covers allow the hangers to be covered once installed, offering an aesthetically pleasing, clean and professional solution, ideal for both bespoke furniture and mass production.
Yes, the Hook system allows assembly without the need to machine the back of the module, which simplifies assembly and improves efficiency in industrial and professional installations.
This screw is designed for joining accessories in the furniture sector, ideal for direct fastenings in wood or derivatives without the need for pre-drilling thanks to its self-tapping thread and sharp point.
The flat head allows for flush installation, ideal for invisible assemblies or where a clean finish is required. The allen footprint offers high torque and reduced risk of slippage during installation.
The zinc-plated coating provides excellent corrosion and wear resistance, ideal for installations in wet or mechanically demanding environments, such as kitchens or bathrooms.
Yes, board size are the same for both drawers only the height of the back board changes in the 93mm-high version.
It is optimised for wood, chipboard, MDF or melamine materials. Its tapered thread allows efficient penetration and a firm grip without damaging the material.
This model is available in 50 mm length and different finishes such as zinc-plated and black zinc-plated, which allows it to be adapted to both functional and aesthetic contexts in furniture installations.
The T15 plug is specifically used to cover the bore of the T15 system's Ø15 mm ring reinforced eccentric, providing a secure finish and protecting the internal mechanism of the joint.
This plug is only compatible with the reinforced eccentric with Ø15 mm T15 ring. It is not compatible with other models such as the eccentric 8054501, which must be taken into account when planning the assembly.
It is made entirely of plastic, which makes it lightweight, easy to install and suitable for integration in furniture solutions with aesthetic and functional requirements.
In addition to covering the eccentric system, the cap improves the appearance of the furniture by concealing visible screws or fittings, providing a clean and uniform surface finish.
Depending on the SKU available, it is available in a white or black finish, which allows it to adapt to different shades and styles of furniture without compromising the aesthetics of the whole.
The RAL code of the white finish of the Optima cutlery holder is approximately 9003.
The RAL code of the grey finish of the Optima cutlery holder is approximately 7001.
The RAL code of the anthracite grey finish of the Optima cutlery holder is approximately 7043.
The Spiral pin is designed as a key component of the closed tek coupling system. Its function is to generate support from inside the panel and to transmit the clamping force through the corresponding spiral coupling.
This bolt is manufactured from turned steel with a zinc plated finish, has a diameter of M6 and a total length of 59 mm. It is designed to provide high strength and durability for structural joints in furniture.
The M6x59 Spiral bolt is exclusively compatible with the Ø15 mm diameter Spiral coupling made of zamak. The combination ensures efficient fastening in technical furniture structures.
Assembly must be carried out by inserting the bolt into a through or press-fit hole in the board, respecting the 6 mm diameter and exposing the thread to be connected to the Spiral coupling.
Each presentation contains 500 units, which facilitates its use in production lines, contract furnishing projects or industrial facilities with a high volume of assemblies.
The Optima cutlery holder has a wide range of models and sizes. The cutlery holder intended for the Vantage-Q drawer is not compatible with the Slim drawer. as a a cutlery holder model exists for the Slim drawer.Both models have the same depth but not the same width, specifically, the cutlery holders for the Slim drawer are 6 mm narrower than the cutlery holders for the Vantage-Q drawer.
Yes, for panels of 16 mm thickness, is possible to use the module 500 mm Vantage-Q drawer.
Yes, for panels of 16 mm thickness, is possible to use the module 500 mm Vantage-Q drawer.
Thanks to its self-adhesive backing, this bumper sticks easily to clean, dry melamine, glass, metal, wood or plastic surfaces without the need for tools or drilling.
The semi-transparent finish allows the bumper to blend discreetly into furniture of any colour or texture, ensuring effective protection without compromising the aesthetic design of the furniture.
It is ideal for use in assembly lines for cabinets and doors, especially in kitchens, bathrooms or office furniture, where damping of the closure or subtle separation between components that may generate contact noise is required.
Yes, the Vantage-Q waste container is compatible with the 18 and 19 mm Slim drawer.
The 10 mm model offers more contact surface and impact absorption and is therefore recommended for larger or heavier doors. The 7 mm is more discreet and suitable for lower load or reduced visibility applications.
The presentation in packs of 2500 units allows efficient replenishment in industrial processes, optimising production times and reducing costs per unit. Ideal for distributors, manufacturers and workshops with high turnover.
This bumper needs to be fitted into a pre-machined hole of 5 mm diameter, located in the upper part of the furniture or structure where it is desired to cushion the impact or limit the opening.
The semi-transparent plastic material guarantees high resistance to intensive use, as well as visually integrating into all types of design without interfering with the furniture finish. It is also ideal for environments where aesthetic discretion is required.
Its main function is to act as an internal stop that prevents a door or panel from hitting directly against the structure of the furniture, helping to absorb impacts and reduce noise or wear due to closing.
Yes, it is fully compatible, as its internal retention design helps to limit travel without interfering with automatic opening mechanisms. Ideal for smooth and controlled closures.
Packaging in batches of 5000 units is designed for large production lines or distributors with high turnover. It reduces the need for frequent replenishment and optimises factory assembly times.
The following video shows how you can easily assemble the abovementioned storage system in a kitchen.
The Strong 3 mm bottom support offers a maximum adjustment of 5.5 mm in depth and 6 mm in height, allowing the position of the suspended bottom module to be precisely adjusted for perfect levelling.
It is essential that the back of the module has a minimum clearance of 3 mm to the fixing wall. This distance ensures that the bracket can be positioned correctly without interference.
The bracket has a width of 42 mm in the fixing area, a height of 135 mm and a base of 54 mm. These dimensions ensure a firm and secure attachment to suspended lower modules, optimising the load and stability of the assembly.
The fixing hole is designed for 8 mm diameter screws, ensuring a robust attachment to the module and facilitating fast and precise mounting.
The bracket is made of steel with a zinc plated finish, making it corrosion resistant and durable in demanding environments. Supplied in batches of 25 units, suitable for industrial installations or large-scale carpentry projects.
Yes, the railings are the same for both drawers.
Bottom mounting and automatic extraction systems need to be larger than the width of the container. This is due to the fact that the attaching mechanism needs to occupy a larger space than the width of the container. However, you can always reduce the minimum size of the module and make it function with manual opening.
In order to assemble the plastic base for the fridge, such as the Fridge Base, it is necessary to have the kitchen Bone feet as well as the number 10 metric screw thread (M10) from the same family, as the base as four holes for fastening the feet.The Fridge Base is also perforated for ventilation and designed for fridges to be integrated into 600 mm wide units with tufts for assembly.
To install this bracket it is necessary to drill a Ø 5 mm hole in the vertical panel where the bracket's fastening bolt will be inserted.
The plastic pad is 3.5 mm thick and provides a firm and tight base that prevents the glass shelf from slipping or vibrating, improving the stability of the assembly.
The holder has a 15.75 mm long, 11 mm wide and 13.5 mm deep body. These dimensions make it compatible with most standard glass shelves.
It is ideal for glass shelves in bathroom furniture, display cabinets, living rooms or kitchens where a discreet, resistant and aesthetically pleasing nickel-plated finish is required.
The bracket is made of nickel-plated zamak for strength and durability, while the glass support area is made of transparent plastic to avoid scratches and to improve the aesthetics of the mounting.
The fixing plate is compatible with wooden panels and cabinets that require a strong right-angled joint, especially in structures where the joints need to be more securely reinforced.
It has four Ø 4 mm holes symmetrically distributed on each side, 25 mm apart, providing a balanced and solid hold.
Thanks to its zinc-plated finish, the plate is protected against rust and corrosion, which makes it particularly suitable for environments with humidity or exposure to temperature changes.
Yes, the 4 mm holes are compatible with standard wood screws, allowing quick installation without the need for special accessories.
The plate measures 40 mm on each side and has a thickness of 1 mm, offering an ideal balance between structural robustness and ease of mounting on flat surfaces.
The following video shows how you can easily assemble the profile system Gola.
For a correct installation of the double 90° bolt, the board must have a Ø 8.5 mm cavity to allow precise positioning of the bolt in the edge of the panel.
The bolt head has a design of Ø 6 x 4 mm, which allows it to be correctly inserted into the corresponding hole of the connecting element, optimising the angular assembly of the furniture.
The bolt has a total length of 77 mm. From the centre of the connecting hole to the end of the bolt is 65 mm, which ensures a firm connection in corners of cabinets or modular structures.
The use of a Forstner or twist drill with depth stop is recommended to ensure accurate drilling to Ø 14 mm to properly seat the body of the bolt in the assembly area.
Packing in batches of 250 units allows manufacturers and distributors to efficiently manage inventory, making it easy to integrate the bolt into continuous production lines or large-scale orders.
The Strong hanger can carry loads of up to 240 kg (120 kg per hanger), complying with EN 15939 under type B test frame. This makes it an ideal solution for heavy duty suspended furniture.
This hanger is compatible with any type of suspended kitchen, bathroom or auxiliary furniture, offering a versatile and robust solution for installations where maximum security and resistance are required.
To install the hanger, machining is required on the module for anchoring at the top and fixing the plate. In addition, the back must be 3 mm from the wall to allow the correct use of the lower brackets (not included).
The Strong system offers triple adjustment (height, depth and sideways), which allows precise adjustment of the module even after installation, without the need to dismantle it. Its zinc-plated steel structure makes it corrosion resistant and long-lasting.
The hanger is available in packs of 50 units, with a zinc-plated finish that guarantees resistance to oxidation, facilitating its handling in professional assembly lines and installations in demanding environments.
The Strong 32 mm bracket provides advanced adjustment of the module position in all three directions (height, depth and side), which is ideal for demanding assemblies where perfect alignment of the cabinet to the wall is required.
To install the Strong 32 mm bracket, the cabinet must have a minimum distance of 32 mm from the wall. This allows the bracket and hanger to work together without interference.
Fixing the Strong 32 mm bracket requires screws with a diameter of 8.2 mm. It has three fixing holes to ensure a secure hold even in heavy applications.
Yes, for example, if we want to assemble a drawer for a module width of 500 mm, we have to use the existing code for the 600 mm module and cut the base and rear panels to the width indicated by the formula. Width of module interior - 19 mm.
In order to install a Gola horizontal profile system in aluminium, it is necessary to use type A or B joining supports. These supports do not have handles and they make it easy to anchor or move the horizontal profiles simply and comfortably. Their pressure mounting or direct screwing requires machining of Ø10 mm in the side of the furniture.The difference between them is the distance between the edge of the machining to the centre of the drill hole. For the A support, it is 15 mm and for B it is 19.7 mm, both are valid for fastening the upper profile as well as the central profile.Depending on the distance of the machining that you want. you can choose one support or the other.
This bracket is made of steel with a zinc-plated finish, which gives it high mechanical strength and corrosion protection, ideal for demanding environments such as kitchens or bathrooms.
The bracket is supplied in boxes of 25 units, allowing efficient installation in industrial or mass production environments, with precise control over available stock.
The suction cup is installed in a hole in the area that is recessed into the wood or panel. The hole should have a diameter of 5.5 mm and a depth of 5.5 mm for a proper fit.
The suction cup has a base diameter of Ø5.5 mm, a total length of 5.5 mm and a visible thickness of 3.2 mm, which allows a precise fixation of the glass without generating direct pressure or damaging the glass surface.
Its function is twofold: to position the glass panel securely and to avoid direct contact between the glass and the metal or wooden elements, preventing slippage or damage due to vibration or pressure.
This suction cup is particularly suitable for display cabinets, glass shelves or furniture structures that use glass panels and require concealed and secure mounting, without compromising aesthetics or insulation.
With a packaging of 3,000 units, this suction cup is ideal for serial installations, optimising logistics and ensuring continuous availability in production lines or large-scale projects.
The expansion tip has been designed to be used exclusively with the Wedge Coupling Brackets Ø19 and the Wedge Coupling Ø19 of the shelf connection system, ensuring precise and efficient integration.
It has a diameter of 3.5 mm and a maximum length of 25 mm. These dimensions allow a firm fastening that withstands tensile loads thanks to its all-steel construction, guaranteeing secure fastening.
The zinc plated finish provides additional protection against rust and corrosion, which is essential to ensure the durability of the component in high humidity or prolonged exposure environments.
No, it is installed by means of a pin in the Ø19 wedge system, without the need for special machining, which optimises time and costs for in-line assembly processes or customised projects.
The expansion tip is supplied in boxes of 10,000 units, ideal for mass production environments where a high volume of stock is required, thus reducing the frequency of replenishment and facilitating storage.
The plunger is designed to lock the System Ø14 system bolt securely, allowing concealed assembly between panels. Its mechanism ensures a solid and precise fixing, ideal for solutions where an invisible but robust joint is required.
For correct installation, a 14 mm diameter hole must be drilled to a depth appropriate to the model, taking into account that the top of the plunger is 7 mm from the surface and its total height is 12 mm.
Zamak provides mechanical strength similar to steel, while the zinc-plated finish offers excellent protection against corrosion and rust, making it an ideal solution for demanding and long-lasting applications.
The plunger is available in versions for 16, 18 and 20 mm boards, adapting to different mounting requirements. Variations affect the installation depth and housing dimensions, while maintaining compatibility with the System Ø14 system.
This component is presented in packs of 1000 units, which favours the supply in mass production processes, minimising replenishment times and facilitating stock management in industrial or wholesale distribution environments.
The Big Ø35 eccentric stands out due to its larger size and clamping capacity, specially designed for the Big Ø35 bolt. This makes it ideal for large-format, robust furniture structures where a stronger and more durable fastening system is required.
To install the Big Ø35 eccentric, a 35 mm diameter hole must be drilled, with a depth that allows the part to be completely housed, taking into account its 17 mm height. The channel for the passage of the bolt must have a distance of 9.5 mm from the top.
Both finishes provide high corrosion resistance, however, natural zamak has a more neutral and uniform aesthetic for applications where the surface finish is not visible. Zinc plating adds an extra layer of protection for more demanding environments.
No, this part is specially designed to work in conjunction with the Big Ø35 bolt, so its compatibility is limited to specific joining systems that require high structural strength in furniture assembly.
The Big Ø35 eccentric is available in packs of 250 units, facilitating its management in automated production lines and optimising stock for distributors and manufacturers who require components in large volumes.
The Ø19 plastic tip stands out for its flexibility and light weight, which facilitates installation without heavy tools. In addition, its transparent design offers a cleaner and more discreet aesthetic for applications in visible furniture such as kitchens or bathrooms.
Thanks to its expandable design, the Ø19 plastic tip provides a firm and secure coupling with different board thicknesses, provided it is used in conjunction with the Ø19 coupling and wedge system. Its elasticity allows it to adapt precisely.
Installation requires a cylindrical housing to allow the plastic tip to be inserted into the holder. The rounded shape facilitates manual or automated assembly on production lines.
Yes, this tip has been specifically designed to work with the Ø19 Wedge Coupling and Coupling Brackets. This ensures full compatibility in installations that combine metal and plastic parts in the same structure.
This product is delivered in strings of 10,000 units, ideal for automated assembly lines and large-scale assembly processes. The strip format improves logistical efficiency and handling during installation.
In addition to concealing the eccentric and improving the aesthetics of the furniture, this plastic cap has a flange that locks the Big 35 eccentric, thus preventing it from moving or loosening due to vibrations or handling over time.
This plug is exclusively designed to be compatible with the Big 35 eccentric, fitting perfectly to ensure an aesthetic and functional fixation within the joint system.
The plug has a diameter of 42 mm and a thickness of only 1 mm, which allows a flush installation. The anchor flange is 12 mm long, which ensures a firm fixation inside the eccentric.
It is ideal for home or contract furniture using the Big 35 eccentric system, especially in visible applications where it is desirable to conceal hardware and maintain a clean, professional design.
The Big 35 eccentric stopper is supplied in packs of 500 units, which is optimal for industrial processes and furniture manufacturers requiring large volumes in an efficient manner.
The cover cap is designed to completely cover and conceal the Hook hanger once fitted, enhancing the aesthetics of the furniture without compromising access or operation of the fastening system.
No, this cover has been manufactured specifically for Hook top hanger units. Its fit is optimised for this model, ensuring perfect integration into kitchen, bathroom and household cabinets.
Yes, it is available in left and right hand versions, which allows a symmetrical and correct installation according to the position of the hanger in the cabinet.
The anthracite grey finish offers a modern and discreet appearance, ideal for combining with modern design furniture. In addition, the plastic material ensures resistance to wear and tear without visual deterioration.
The Hook hanger cover comes in packs of 200 pieces per hand (left or right), optimising its use in production lines or large-scale furniture projects.
Its main function is to protect the furniture from impacts generated by closing doors, in addition to dampening noise. It acts as an absorption element, preventing damage due to repeated use.
The circular bumper head is designed in the shape of a knurled screw to improve the clamping when clamping. This shape allows for quick and firm installation into 6mm diameter holes without the need for adhesives.
It is made of plastic with a white finish. This allows it to be easily integrated into most furniture, whether in kitchen interiors, bathrooms or general cupboards.
It is supplied in industrial batches of 5000 units, which is ideal for carpentry shops, furniture factories and distributors who require large volumes of stock for continuous installations.
Yes, its unobtrusive and universal design allows it to be installed as a complement to most swing door systems, either on standard hinges or in solutions with additional damping.
The plug is designed to be press-fitted into 16 mm diameter holes, concealing and protecting the attachment point of the coupling system. It offers an aesthetic and safe solution for furniture assembly.
It has a white plastic finish that allows it to be discreetly integrated into light-coloured structures. It is also available in a brown version for greater aesthetic adaptability to different furniture colours.
No. The plug has a circular protrusion at the rear of the plug to allow tool-free press-fit installation, facilitating serial assembly in industrial environments.
The board must have a 16 mm diameter hole, suitable for the System 16 range of couplings. The plug is designed to fit perfectly into this drilling standard.
It is ideal for use in kitchen furniture, cabinets and modular systems where effective concealment of mechanisms is desired. It also improves the final aesthetic finish and prevents accumulation of dust or debris in the bore.
The RAL code of the anthracite grey finish of the sides of the Vertex drawer is approximately 7043.
The RAL code of the grey finish of the sides of the Vertex drawer is approximately 7045.
The RAL code of the white finish of the sides of the Vertex drawer is approximately 9003.
The following video shows how you can easily assemble the Vertex inner drawer.
The UniBlock cups are available in two versions covering board thicknesses from 16 to 19 mm and from 22 to 30 mm, which allows a great versatility of use in furniture of different characteristics.
The cup has a diameter of 18 mm and a height of 5 mm. Its 25 mm wide central base is designed for firm integration into the board. In addition, its channel area allows for precise and efficient mounting together with the central fixing screw.
The part is mostly made of high-strength and durable plastic, while the fixing screw is made of zamak, which guarantees a firm and secure anchorage for the horizontal brackets of the UniBlock system.
The packaging contains 2500 units, ideal for industrial projects, mass production or mass installations in contract environments such as offices, modular kitchens or shops.
The fastening is done by means of a zamak screw inserted in the central hole of the cup, which goes through the reinforcement channel and secures the support to the board in a precise, firm and wear-resistant way by repeated use.
The locking system of the Sekure bracket prevents the shelf from shifting or falling when the furniture is turned over, which provides additional safety during transport and handling, especially in professional installations or large furniture projects.
No tools are required. The system incorporates a manual locking plate that allows the steel bolt to be easily fixed and released, making assembly and disassembly quick and easy, even in confined spaces.
The bracket is available in multiple finishes: white, grey, anthracite grey and brown plastic. It is also available in two diameters: 3 mm and 5 mm, adapting to different design and resistance needs.
In addition to the manual locking, the bracket has a double insert design that improves the fixation: the bolt goes 7.5 mm into the bracket and the longer part (10 mm) is on the side of the furniture, increasing its stability.
The Sekure bolt-on bracket is supplied in packs of 250 units, which makes it easy to implement in production lines, industrial joinery or large account installations.
Yes, it is the same profile that is used for all four drawer heights. The 178 mm height panel, however, also needs the front rail profile.
The maximum dimensions per door are 2400 high and 500 wide (per door leaf).
This plunger has been specifically designed to be used with M8x1 threaded hook-in screws, which ensures a robust and precise connection between panels in the System 14 and 18 system.
The pre-bore must have a diameter of 16 mm and a depth of 15.6 mm for the plunger to fit correctly and be 9 mm away from the centre of the bolt hole, thus ensuring accurate alignment.
The use of zamak provides high mechanical strength, while the zinc-plated finish protects against corrosion, making it a durable solution for applications in demanding environments.
The Twofold system offers the versatility of sliding well when assembled with and without a lower guide. Whether it is used depends on the type of wardrobe in which the system is mounted.
Yes, its compact design allows it to be integrated into the panel, concealing the junction point and guaranteeing an aesthetic finish, ideal for high-end furniture or visible installations.
The plunger with ring is available in packs of 1000 pieces, allowing efficient supply for production lines, distributors and high volume assembly.
The finishes for these supports are RAL9006 for the aluminium colour and RAL8019 for the Moka colour.
The bracket measures 11 mm high, 11 mm wide and 10 mm long, while the integrated bolt has a diameter of 5 mm and a length of 7 mm. These dimensions allow for a compact and unobtrusive installation, ideal for wooden shelves with aesthetic and functional requirements.
It is made of Zamak, an alloy of high hardness and durability, and finished with nickel plating that provides protection against corrosion. This makes it particularly suitable for applications in wet or heavy-duty environments such as kitchens, offices or commercial furniture.
The 5mm diameter bolt is completely concealed by being recessed into the board, enhancing the aesthetics of the furniture and minimising visible fixing points, ideal for contemporary or modular design furniture where appearance is key.
Thanks to its dimensions and robustness, this bracket can be installed on medium or high density boards (such as MDF or reinforced chipboard) and is ideal for standard thicknesses. Its nickel-plated fastening ensures a firm and secure connection even on furniture under load.
The product is presented in packs of 100 units, which facilitates stock management and supply in mass production projects or large commercial or domestic furniture installations.
The following video shows how the sliding door system for wardrobes is assembled.
The plate must be fixed to the wall with 4 screws in 2 columns and 2 rows, with a distance of 42 mm between screws. This arrangement ensures the necessary structural strength for lower module suspension systems.
The plate measures 60 mm long by 13 mm deep, and is installed in a recessed manner. Its concealed design allows for an aesthetic finish with no visible elements from the outside of the module once installed.
The plate is specifically designed to work with Strong system hangers, allowing a stable and secure suspension. The curvature of the part facilitates direct assembly with Strong system hangers.
The Strong 32 mm bracket offers greater module height adjustability, while the Strong 3 mm bracket is intended for installations where a more compact fixing is required. The choice depends on the distance between the back of the module and the wall.
Made of steel with a zinc-plated finish, the plate offers high tensile strength and durability against corrosion. Its integration into the Strong system ensures reliable support for suspended base units, ideal for kitchen and bathroom environments.
For correct installation, a 75 mm deep hole must be drilled using a 3 mm diameter drill bit. This dimension ensures a firm and secure anchorage inside the board.
The bracket is inserted at its narrowest part by pressure until it is completely recessed. Once in place, its wider end is visible and ready to support the shelf.
The bracket is 16 mm long, with a diameter of 5 mm in the shelf-supporting part and 3 mm in the insertion area. These measurements optimise stability and weight resistance in thin boards.
It is made of steel with a nickel-plated finish, which gives it a high resistance to wear and corrosion. This finish also offers a professional and unobtrusive aesthetic for visible applications.
The metal bracket is designed to be used on wooden boards of at least 10 mm thickness, ensuring secure fastening without compromising the structural integrity of the furniture.
The following video shows how the sliding door system for wardrobes is assembled.
It is recommended to use a flat head screw with a diameter of 3.5 or 4 mm, which ensures a firm and proper fixation without damaging the board material.
No, the UniBlock system allows fast and reliable assembly without the need for tools. Only a small insertion stroke is required, which optimises installation time on the assembly line.
This bracket is designed to be used exclusively with the UniBlock system cups. Together they allow invisible and firm joints to be made in boards of different thicknesses.
The UniBlock hook-on bracket is available for different board thicknesses: 16 mm, 19 mm, 25 mm and 30 mm, allowing a wide versatility for modular furniture projects.
The bracket is made of zamak with a nickel-plated or rust black finish. This treatment provides high resistance to corrosion, durability and an aesthetic finish in keeping with high-end furniture.
This bracket is designed to accommodate glass panels that can be inserted vertically. Compatibility depends on the thickness of the glass and the fit with the Ø6.3 mm by 10 mm long clamping area of the bracket.
Yes, it incorporates a plastic surface that acts as a shock absorber between the screw and the glass, preventing damage from direct pressure or vibrations and providing a more secure and durable fixing.
The screw comes with a 20 mm long body by 8 mm diameter and a Ø6.3 mm thread. It is screwed directly into the vertical panel or cabinet casing, which allows for quick mounting without additional accessories.
The following video shows how you can easily install the Zero system.
The bracket is finished in nickel plating, which gives it high corrosion resistance, durability against humidity and a neutral aesthetic finish that easily adapts to visible glass furniture.
No, it is only necessary to screw the bracket onto the panel using the built-in screw. For increased safety of the glass, it is recommended to use it in conjunction with an additional bracket.
The cup acts as an indispensable element of the UniBlock system, providing a solid and secure connection between the brackets and the horizontal wooden panels. Its design facilitates assembly without compromising the stability of the furniture.
It is specifically designed for panel thicknesses between 16 and 19 mm. Its depth and internal geometry are optimised to ensure a perfect fit of the support inside the wood panel.
The cup combines a plastic body that provides insulation and lightness, together with a zamak reinforcement in the anchorage area, which improves mechanical resistance and prolongs its durability over time.
Installation requires drilling a Ø20 mm hole in the vertical panel to a depth of 13 mm, normally carried out with a CNC-controlled drill or automatic machinery to ensure mounting accuracy.
Delivered in packs of 2,500 units, it is ideal for large-scale production environments, industrial joinery or distributors requiring volume and logistical efficiency.
The RAL code of the anthracite grey finish of the Sling is approximately 7005.
The RAL code of the white finish of Sling is approximately 9003.
The following video shows how you can easily install the ironing board.
It uses a magnetic system that allows the automatic lock to be activated or deactivated without the need for a visible lock, while maintaining the external aesthetics of the module.
The kit contains 1 lock and accessories for installation, packaged in a box of 25 units.
Assembly is very simple thanks to a guide sticker that marks the exact machining points and the position of the lock, facilitating installation.
It is made of white plastic and incorporates internal metal parts to ensure the reliability of the system.
It depends on the type of front panel you use for the interior drawer:- Aluminium front. This is fitted onto guides at the usual distance, 37 mm in the 4th hole of the guide.- Particle board front. The thickness of this board must be added to the 37 mm of the 4th hole of the guide.In other words, if the front is 19 mm thick, the guide must be fastened at 37 + 19 = 56 mm at the 4th hole of the guide.
To open the door, simply approach the magnetic key to the lock from the outside, allowing discreet and secure operation.
The following video shows how you can easily install the Zero system.
These hooks are designed to be hung on aluminium profiles fixed to the wall, such as those used in kitchen organisation systems. Their structure allows quick and stable integration into flat profiles without the need for tools.
They are made of steel with a flat steel structure, which makes them highly resistant to daily use. The anthracite grey finish provides durability and a modern aesthetic in keeping with industrial kitchens or contemporary design.
They are ideal for hanging kitchen utensils, cloths and other light, frequently used accessories. Their shape allows them to be held securely without the risk of accidental slipping.
The set includes 5 hanging hooks, presented together for easy installation and replacement in furniture projects or renovation of kitchen spaces.
These hooks are part of a range of accessories optimised for aluminium profiles, such as shelves, roll holders or tablet holders. They can be easily combined to maximise vertical space utilisation in professional or domestic kitchens.
The following video shows how you can easily install the Zero system.
The following video shows how you can easily install the Zero system.
Each divider is 500 mm wide by 310 mm deep, so the cabinet or shelf must be at least 310 mm deep for proper installation.
The dividers are fixed by means of screwed clips with no fixed position, allowing them to be installed either at the back or at the bottom of the unit. This versatility makes it easy to adapt them to different storage configurations.
They are made of steel with a chrome-plated finish, which gives them corrosion resistance and a shiny finish that goes well with high-end kitchen or storage furniture.
Yes, the kit includes 4 metal spacers, fixing clips and screws, allowing immediate installation without the need to purchase additional components.
They are ideal for use in industrial kitchens, storage cupboards, shop shelves or office organisation spaces, allowing spaces to be compartmentalised in a robust and aesthetically pleasing way.
The holder has a total length of 280 mm and has 4 storage lines, which allows you to organise several cups in a practical and efficient way depending on the type and size of the model.
There must be a free bottom surface (such as a shelf, cabinet base or countertop) that allows the bracket to be bolted to and is at least 280 mm deep.
Installation is simple and is carried out by screwing the bracket directly to the inside of the furniture, whether on shelves, cupboards or under counters. The necessary screws are included.
It is made of chrome-plated steel, which ensures easy cleaning, and a shiny finish that makes it compatible with domestic or professional kitchen environments.
The following video shows how you can easily assemble the pull out lateral shoe rack.
Yes, because of its durability, ease of access and compact design, it is ideal for bars, restaurants or industrial kitchens that need to optimise storage space for glassware.
The following video shows how you can easily install the Zero system.
The profile is designed to horizontally join each side of the base unit, providing a solid and stable joint. It is especially useful for reinforcing modules that house ovens or sinks, preventing unwanted movement.
It should be fixed to the top of the module, taking up as little space as possible. It is pressed into place with the connecting fitting and then screwed in place with Euro flat head or self-tapping screws Ø4.
Yes, the profile is supplied in a length of 2350 mm and can easily be cut to the required project size with a straight cut.
It is made of aluminium with a matt anodised finish for corrosion resistance and uniform aesthetics, ideal for high quality kitchens.
Yes, installation must be carried out in conjunction with the compatible connecting fittings, available in a press-fit or screw-fit version, ensuring maximum module stability.
The following video shows how you can easily install the Zero system.
It is very simple – the Hook brackets that fix the profile to the wall have a height regulation of ±5 mm.
These brackets have two screws – one of them attaches the module to the wall, and the other regulates the height and ensures it is fully horizontal.
The most common practice is to place the lateral hinges in alignment with the central ones.
However, for closets with really heavy doors, two of the concealed hinges can be placed at the top of the closet to increase resistance and stability.
We would like to remind you that in the case of folding-door or hinged-door assembly, the hanger must go with the lateral supplement.
No, they do not include covers, which are sold separately.
They only include the aluminium profile and the diffusor profile.
Yes, it is a cuttable LED strip by its cutting area (every 55.5mm) and can be connected with a cable and even use a connecting fitting.
Yes, the integrated telescopic slide, made of aluminium with nylon wheels, allows full extraction, providing full access to the cloths without obstructions.
Each arm can pivot up to 90° from its base position, allowing ergonomic distribution of towels according to the space available.
For the 3-arm model (length 440 mm), we recommend an interior clearance of at least 450 mm depth and 60 mm clear height to allow the arms to rotate fully.
For optimal installation, the module should have a minimum depth of 500 mm and an internal width of between 360 mm and 520 mm.
The fastening is carried out by means of screws included in the set. The system is anchored directly to the base of the module, guaranteeing a firm and durable fastening without the need for additional machining.
It is made of steel with a white painted finish, which gives it a clean aesthetic, high resistance to wear and tear.
Yes, the cover can be removed for washing or replacement. It is designed for ease of maintenance and to fit compatible standard size covers (945 × 310 mm).
Yes, the system has metal guides with a full-extension stop, which lock the board when fully extended, providing stability during use.
No tools are required. The system is fully extendable by manual adjustment, allowing precise adjustment to each type of plate.
It is made of high quality technical plastic, with good impact resistance and weight deformation, ideal for intensive use in kitchen environments.
Yes, the plate holder has a base with a non-slip internal structure that improves stability during transport and prevents shifting on shelves or in drawers.
Although it has no explicit load limit, its design supports without deformation up to 10-12 standard size porcelain dishes, equivalent to a weight of approximately 8-10 kg.
It is not stackable, but can be combined modularly with other plate racks in the same drawer to compartmentalise dishes according to size and frequency of use.
Yes, the mechanism is different in the doors that have soft close hinges.
It is available in versions compatible with 16 mm and 18 mm thick boards, which allows it to adapt to the most common standards in kitchen furniture.
The base has been designed for installation in 600 mm wide modules, typical in kitchens to integrate refrigerators.
It has strategic perforations that ensure proper air circulation in the lower part of the integrated refrigerator, improving its efficiency and preventing overheating.
It incorporates holes for direct fixing of the kitchen feet, as well as adjustment locks for quick assembly to the furniture without the need for special tools.
The base is delivered without additional accessories, as it is attached directly to the module and does not require any special fittings.
The bar is installed using double-sided, high-adhesion adhesive tape along its entire length, allowing it to be mounted without drilling on smooth surfaces such as melamine, lacquered wood or glass.
Yes, the design of the bar allows for both vertical and horizontal mounting, making it easy to adapt to different spaces and styles of professional or domestic kitchens.
The bar has a length of 400 mm, a height of 40 mm and a thickness of 15 mm, which provides a usable surface suitable for several knives or metal utensils.
It is equipped with a high-strength internal magnet, inserted into the core of the stainless steel profile, designed to secure knives of different sizes securely without risk of falling.
It is suitable for scissors, tweezers, peelers, spatulas and other light to medium metal utensils containing sufficient ferric content to be attracted by the magnet.
For the 300 mm model, a minimum internal width of 225 mm and a minimum depth of 480 mm is required. For the 400 mm model, the inside width must be 335 mm.
The complete system supports a maximum load of 30 kg, distributed between the 3 metal baskets. An evenly distributed load is recommended to ensure the proper functioning of the damped closure.
It includes 2 roller guides with full extraction and soft closing system, which allows a smooth and silent movement, ideal for high traffic kitchens.
Yes, the design incorporates height-adjustable baskets, allowing the space to be adapted to different sizes of stored products or utensils.
The kit includes screws, guides, fixing hardware and 3 metal baskets, as well as the necessary components for direct anchoring of the door to the frame.
It is designed to be installed in 450 mm wide modules and is compatible with 16, 18 and 19 mm thick boards.
The dimensions of the basket are 250 mm (length) x 380 mm (width) x 500 mm (height). It is recommended to check that the internal clearance of the module is sufficient to allow the system to be tilted without interference.
It includes a folding mechanism that allows the door of the unit to be opened, facilitating access to the inside of the basket. This system is installed directly on the door using screws.
The basket is delivered disassembled, and includes screws, assembly instructions and the necessary folding system for installation.
Yes, the folding system allows reversible installation, so it can be mounted to open to the left or right depending on the design of the furniture.
The complete mechanism supports up to 30 kg of distributed load, which is equivalent to 7.5 kg for each of its 4 chrome-plated steel baskets, guaranteeing strength and durability even in intensive use.
Yes, the system can be installed with both right-hand and left-hand opening, making it versatile for projects with different corner unit configurations.
A minimum cabinet depth of 530 mm, a minimum height of 600 mm and a door width of 450 mm are required, which are standard dimensions in professional modular kitchens.
Thanks to its articulated structure, the system allows the complete extraction of the frame and the 4 baskets, facilitating full front access to the stored utensils or products.
Yes, it incorporates a soft-close mechanism that guarantees a controlled and silent movement when closing the frame, avoiding knocks and increasing the useful life of the furniture.
The module must have a minimum internal width of 400 mm and a minimum depth of 480 mm to ensure optimal functioning of the guide system.
The pull-out trolley supports a total load of up to 30 kg, distributed among the three adjustable baskets.
The system has 2 roller guides with full extraction and soft close, which provide a silent sliding and prevent slamming.
Yes, the chrome baskets are height adjustable, allowing for greater versatility in adapting the trolley to different types of products and utensils.
It is fixed to the left-hand side of the unit, ensuring structural stability and efficient use of space.
The following video shows how you can easily assemble the Twice Top mechanism.
The bar is telescopic and adjustable in different models, with widths ranging from 450 mm to 1150 mm, depending on the selected reference.
The folding hanger can hold a maximum load of 12 kg, making it ideal for hanging clothes and other items in the wardrobe.
It is mounted on the side panels of the cabinet or cupboard. For cabinets with hinged doors, we recommend the use of the Hang side extension (codes 7085025, 7085107, 7085107 and 7085049).
It is made of steel and plastic, with finishes in chrome, mocha painted, black painted and stone grey painted, to adapt to different styles of wardrobes.
It has a soft damping system with automatic return, which makes it easy to access the higher areas of the cabinet without effort.
It is designed to provide additional support on wardrobe rails, preventing bending, but the overall capacity will depend on the rail used and the load distribution.
This bracket is specifically designed for rectangular Luxe bars, it is not compatible with round bars without additional adapters.
Yes, if the bar is long or further reinforcement is required, multiple brackets can be installed at the necessary attachment points.
For installations longer than 1 metre, it is recommended to install a central support every 50-60 cm to ensure stability.
The kit includes the M6x40 screw, but if installing on special surfaces (such as plaster or light boards), the use of reinforcement plugs (not included) is recommended.
It is adjusted by means of a lever mechanism in the centre of the tensioner, allowing the tension to be adjusted to one side or the other for precise alignment.
Yes, small holes must be drilled to fix the ends of the turnbuckle to the door and frame cover.
Yes, the packaging contains the complete tensioner, fixing parts and adjustment mechanism for easy and precise installation.
Thanks to its lever adjustment system in the centre, it allows the door to be tensioned to one side or the other until the desired alignment is achieved.
Yes, it is compatible with different door thicknesses as long as they are from the Even series, as the brackets allow it to be fixed without compromising the structure.
The V-shape allows the glass to be held securely and prevents it from moving or being damaged inside the profile.
It is made of strong, flexible plastic, which makes it easy to install and ensures optimum glass retention.
Yes, the material can be easily cut to fit the length required for the installation.
It is installed by snapping the glass into the profile and securing it with the V-shaped glazing bead.
Yes, it can be removed and reinstalled without compromising its functionality, provided that care is taken not to damage the glass or the profile.
It is compatible with 19 to 20 mm thick doors.
The profile is fixed by means of a 3.7 mm centre groove, which makes it easy to mount and align on the door.
The profile has a width of 47 mm in the vertical part and 25.7 mm in the horizontal part, which allows an aesthetic and functional integration into the furniture design.
Yes, it can be combined with other accessories and profiles from the Free range to achieve a uniform and functional wardrobe design.
No, the packaging includes only the profiles.
This profile reinforces the door structure, preventing deformation and maintaining alignment, especially on large doors.
It is designed for doors with an exact thickness of 16 mm, ensuring a precise and secure fit.
It is primarily designed for hinged doors, but can be adapted to sliding doors if the structure allows it and the thickness is 16 mm.
Yes, as it is made of steel, it provides greater structural resistance, avoiding deformation of the door and absorbing impacts better.
The bar can support up to 40 kg per metre, according to ISO:7170:205, provided that the weight is evenly distributed and suitable supports are used.
The use of Luxe brackets specifically designed for this bar is recommended, ensuring a stable and sturdy mounting.
The bar must be installed with compatible Luxe brackets, which can be screwed to the sides of the cabinet or to the internal structure of the cabinet.
The rod is available in 2.35 m and 3.90 m lengths. It has a rectangular cross-section, specifically designed for modern wardrobes.
The connection for this type of 230V AC sensor with this converter is very straightforward, it does not require tools or electrical know-how. The quick connection including both the cable and the converter should be simply used.
Yes, the bar is compatible with the accessories of the Moka range, allowing for greater customisation and functionality in the cabinet.
It is recommended that the side panel be at least 16 mm thick to ensure a firm hold and to avoid deformation over time.
No, these brackets are designed for fixed installation. To adjust the height, it is necessary to define the correct position before mounting.
These brackets are specific for 30x15 mm section bars. For round bars, brackets designed for this profile must be used.
The assembly is embedded in the side of the furniture, which provides greater strength and stability to the structure.
Each lot contains 50 side brackets, ideal for multiple cabinet installations or large volume projects.
It is designed to support an approximate weight of 5-7 kg, depending on the material and thickness of the panel where it is installed.
When retracted, the hanger is 110.8 mm long and when fully extended, it is 168 mm long.
It is not recommended to install it on panels with a thickness of less than 16 mm, as it may not fit properly and may affect the stability of the hanger.
A 14.2 mm diameter hole is required to correctly fit the hanger into the side panel of the enclosure.
We recommend the use of 4 mm thick glass, with polished edges for a perfect fit.
No, the profile is supplied without fasteners, therefore, beading and brackets must be purchased separately.
Yes, a fixing bead is required to hold the glass in place, and connecting brackets are needed to assemble the structure.
It is assembled by means of connecting brackets and fixed with screws or specific adhesives depending on the application.
It is made of extruded aluminium with a matt anodised or textured black painted finish, giving it an elegant design.
It is designed for 18 mm thick cabinet doors, ensuring a proper fit without additional modifications.
No additional accessories are included in the packaging. Installation is carried out without additional assembly, but may require fasteners depending on the enclosure structure.
It is made of matt anodised aluminium, which provides corrosion resistance, light weight and durability.
They are made of white painted steel, which provides great resistance, durability and a neutral aesthetic to adapt to different environments.
They must be screwed to the wall using the pre-drilled fixing points. The brackets are then easily slotted into the profile grooves.
They are compatible with single slotted shelf brackets with 50 mm pitch, designed to support wooden or glass shelves.
They are ideal for wardrobes, dressing rooms, laundry rooms, offices and shops, where a modular and adjustable shelving system is required.
It is recommended to use 6 mm diameter screws with dowels suitable for the type of wall to ensure a secure fixing.
The frame is adjustable and can be adapted to an internal cabinet gap between 564 mm and 614 mm, allowing for flexibility in installation.
It incorporates concealed full-extension slides with soft closing, which allows a smooth and silent sliding, avoiding abrupt knocks when closing.
A minimum cabinet depth of 480 mm is required to ensure optimum installation and operation of the shoe rack.
No, the automatic clipping system allows for quick and easy installation without the need for additional tools.
Yes, the concealed full-extension slides allow easy access to the entire contents of the shoe rack without the need to bend down or force it out.
It is made of steel with welded wire and has a mocha coloured painted finish, ensuring durability, strength and an aesthetic design compatible with modern cabinets.
It is mounted by means of the tabs on its four corners, which allow it to be easily anchored to any compatible bracket in the cabinet.
It is available in three sizes according to width: 475 mm, 675 mm and 775 mm.
The drawer height is 173 mm and the sides measure 454 mm each.
It is compatible with sliding doors of furniture and wardrobes, helping to prevent the entry of dust and dirt.
Installation is simple, as the adhesive is included in the base. Simply cut to the desired length with scissors and attach to a clean, dry surface.
It is available in 7 mm, 9 mm and 17 mm. The choice depends on the space between the door and the frame where the weatherstripping is to be installed.
Yes, it can be cut to length without affecting its performance. The material is flexible and can be adapted to different lengths.
Yes, the Even tensioner can be cut at both ends to achieve the desired size.
No, once removed, the adhesive loses its effectiveness. If reinstallation is required, it is recommended to replace it with a new one.
The frame incorporates concealed full-extension runners with a soft-close system that prevents sudden shocks when closing the basket.
Yes, the frame is adjustable in width, allowing it to be adapted to an internal cabinet gap of 564 to 614 mm.
Installation requires a minimum cabinet depth of 480 mm.
The frame is bolted to the sides of the cabinet and features an automatic clipping system for easy installation of the basket.
Yes, it can be combined with other storage systems and accessories for wardrobes, such as shoe racks or pull-out hangers from the same line.
It is installed by recessed mounting on the side of the cabinet, ensuring a firm hold.
It is recommended to install it on side panels at least 16 mm thick to ensure stability and strength.
The slide frame can be adapted to the internal cabinet recesses between 564 and 614 mm, allowing flexible installation according to the dimensions of the cabinet.
No, the soft closing with cushioning ensures a smooth and controlled movement, avoiding sudden bumps when closing the drawer.
It is recommended to install on boards of 16 mm or more to ensure a firm fixation and to avoid deformation.
The frame is installed by means of an automatic clipping system, which makes it easy to assemble and disassemble without the need for additional tools.
The jewellery drawer is made of wood with interior compartments, while the slide frame is made of mocha painted aluminium, guaranteeing strength and durability.
The bar is compatible with Ø28mm brackets, ensuring a firm and stable fit for installation.
According to ISO: 7170:205, the bar and supports can carry up to 40 kg per metre of evenly distributed load.
No, the bar is supplied without additional accessories. Compatible brackets and screws must be purchased separately.
Available finishes include Titanium, Black, Matt Anodised and Moka, each designed to match different styles of furniture.
Yes, although it is primarily designed for residential furniture, its load capacity and strength allow it to be used in shops, fitting rooms and commercial storage as long as the load limits and distances between supports are respected.
This bracket is made of high-strength zamak, which allows it to withstand loads of up to 40 kg/m, provided that the bar and side supports are correctly installed.
M5x38 mm screws are included for fixing to the top. It is recommended to ensure that the mounting surface can withstand the distributed load.
It is designed for board thicknesses greater than 15 mm and it is advisable to mount 2 tensioners per door when the width is greater than 600 mm.
It is specifically designed for Ø28mm round bars, regardless of whether they are made of aluminium, steel or similar materials of the same size.
The bracket must be fixed to the top of the enclosure with the screws supplied and ensure that the rod is correctly aligned and fitted into the central bracket to avoid displacement.
Yes, the design of the central bracket allows for a secure and removable attachment, making it easy to replace or adjust the bar if necessary.
A minimum internal width of 700 mm is recommended for optimum installation and to ensure correct movement of the pull-out system.
It incorporates full extension guides with ball bearings, designed for smooth movement.
The 9 rods per side are fixed and are equipped with plastic anti-slip stops to prevent the trousers from slipping.
It is not adjustable in width. It has fixed dimensions of 665 mm width and 470 mm depth, so compatibility with the enclosure should be checked before installation.
It is made of chrome-plated steel with wire rods, which guarantees durability and withstands daily use without deformation.
They are compatible with 4 mm glass and 10 to 11 mm thick boards, ensuring a firm and stable installation.
The carriages are fitted to the top and bottom of the door using the hardware included in the kit.
It is recommended to use a screwdriver and drill to fix the screws in position.
No, this kit does not include a brake or damping system. If soft closing is required, it is necessary to complement it with a Space+ compatible damping system.
This bar is compatible with specific side and central brackets for 30x15 mm oval bars, ensuring a correct fixing in the cabinet.
According to ISO: 7170:205, the bar can support up to 40 kg per metre with the load evenly distributed.
The bar is fixed using specific lateral or central brackets for 30x15 mm bars. It is recommended to install it with sturdy screws to ensure stability.
Structures fixed only to the wall with 4 anchors (2 Zero wall anchors per vertical profile) support less weight and it is not recommended to load them with more than 80 kg for a structure of 2 vertical profiles with 4 wall anchors. It is very important that the wall fastening is done properly according to the type of surface where the structure will be installed.
Yes, it is suitable for built-in wardrobes and dressing rooms, provided that suitable brackets are used and a firm installation on the sides of the furniture is ensured.
An internal recess of 564-614 mm width and a minimum depth of 480 mm is required for proper installation.
The frame is screwed to the sides of the cabinet. Its concealed, full-extension, soft-close runners make it easy to move the drawer.
Yes, the frame is adjustable in width, allowing it to be adapted to the space available inside the cabinet.
No, this kit is designed to work with its own adjustable slide frame and automatic clipping system, so it is not interchangeable with other standard slides.
The soft closing system avoids abrupt shocks when closing the drawer, as the slides have an absorption mechanism that slows down the closing in the last centimetres.
The frame is fixed to the sides of the cabinet with screws. The slides include an automatic clipping system that facilitates installation and allows easy removal if necessary.
It is compatible with enclosures with an internal opening of 564-614 mm wide and a minimum depth of 480 mm.
The rods are fixed and are designed to hold trousers securely, preventing them from slipping or falling.
The rods are made of steel with a mocha painted finish, while the frame is made of painted aluminium to ensure strength and durability.
To install the bumper it is necessary to carry out a machining of Ø5 mm and 10 mm deep, in this way the bumper is correctly embedded in the panel.
Yes, the slides are fully extractable and soft-close, which avoids sudden shocks and prolongs the life of the mechanism.
The brackets are made of high-strength steel to ensure durability and stability of the structure.
This kit is specifically designed for Plus 7 profiles, so compatibility with other profiles is not guaranteed.
Includes black painted or zinc-plated screws, depending on the selected part number, to ensure a firm hold on installation.
Each kit includes 10 sets, with 4 brackets and 8 screws per set, allowing for multiple installations.
Yes, provided that the glass is mounted in a Plus 7 profile and the appropriate fixing accessories are used.
No, this bracket is specifically designed for Ø28mm bars and is not compatible with different diameters.
The bracket is screwed to the side of the furniture, and the plastic part is snapped in place, preventing it from being easily removed.
To calculate the exact size of the bar, subtract 6 mm from the size of the gap between the side supports.
It is recommended to use Ø3.5mm wood screws for a secure and stable fixing.
It is made of zamak and plastic to ensure strength and a firm hold on the bar.
It is compatible with 30x15mm section bars, so it is not recommended for use with bars of other dimensions.
The bracket is mounted into the side of the cabinet, ensuring a firm and stable hold.
It is made of zamak, a material offering high mechanical strength and durability, with a nickel-plated or aluminium painted finish.
No, the packaging only includes the side bracket, so the screws must be purchased separately.
Yes, it is suitable for wooden furniture and can be installed on metal structures with the appropriate screws.
They allow the Sling hanger to be installed on the side of the wardrobe, ensuring that the hanger is tilted forwards and optimising space for hangers.
They are fixed to the bottom of the wardrobe as a hanger stop. No complex tools are required for mounting.
They are made of sturdy plastic and are available in all the finishes of the Sling hanger.
Each package contains 1 set of spacers, sufficient for one installation.
This profile is 47 mm high, with a 20.4 mm horizontal part without a flange and a 25.7 mm flange on the other horizontal part.
It is compatible with panels or glass between 19 mm and 20 mm thick.
It should be cut to the required size and fixed to the cabinet structure, ensuring that the flange and the horizontal part fit correctly into the door.
It is made of matt anodised aluminium, which gives it strength and an elegant finish.
It is available in 2.35 metres and 2.7 metres in length.
The gap between the side of the module and the frame / rails of the Hack interior cabinet or walk-in closet accessories is a minimum of 20mm.
The Free Rapid handle profile is compatible with door thicknesses between 19 mm and 20 mm for an optimum fit.
No, the profile is supplied without accessories. It is recommended to purchase screws and fasteners according to the type of door and the desired installation system.
The profile is fitted to the edge of the door and secured with adhesives or concealed screws depending on the preferred mounting system.
Yes, it has a 25.7 mm horizontal flange, which facilitates installation and improves the stability of the profile on the door.
The gap between the side of the module and the frame / guides of the Keeper interior cabinet or dresser accessories is 25mm.
Yes, it can be installed on doors using soft closing hinges, as its design does not interfere with the damping mechanism.
It is available in matt anodised and textured black paint, both with high wear resistance.
Subtract 27 mm from the overall size of the door to determine the exact size of the glass to be installed.
The profile is designed to accommodate 4 mm thick glass.
No, the bracket is specifically designed for 30x15 mm oval bars, so it is not compatible with round bars or other dimensions.
A minimum depth of 250 mm is recommended, ensuring that the bar does not interfere with interior storage.
No, this bracket is designed for screw mounting on wood, MDF or melamine. For metal surfaces, specific fixings would be required.
Yes, it is recommended that the bracket be pre-milled to a depth of 3 mm to ensure that the bracket is correctly embedded in the side surface of the enclosure.
It is made of matt anodised aluminium, giving it corrosion resistance and a high quality aesthetic finish.
It is 2.35 metres long, with dimensions of 7.5 mm vertically and 5.5 mm horizontally.
It is designed for edge finishes on cupboard and furniture tops, providing an aesthetic finish and a better grip.
Thanks to its T-shape and central flange, the profile is pressed into the material, ensuring a firm installation.
Each package includes 25 pieces of 2.35 metre long Face T-profiles.
Yes, without any problem. However, if the drawers are wider than 600 mm, and in order to guarantee a correct opening of the drawer when pressing on any point of the front of the drawer, it is recommended to mount it.
The rod is supplied with a length valid for modules of 1200 mm, with a side thickness of 16 mm, and can be cut to the size required for our assembly.
It is compatible with 4 mm and 7 mm thick glass, ensuring a tight fit within the Plus 4 and Plus 7 profiles.
The glazing bead has 4 inner tabs that hold the glass in place without the need for additional adhesives.
Yes, it is available in black and grey, allowing it to be combined with different profile finishes.
Supplied in 2.35 m and 3.9 m bars. Yes, they can be cut to size according to the size of the glass and the profile.
No, its slim design and black or grey finishes allow for discreet integration with the profiles, without affecting the aesthetics of the whole.
It is 47 mm high and 43 mm wide. The square handle area measures 10 mm high x 18.6 mm wide.
It is compatible with doors from 19 mm to 20 mm thick.
No, the minimum installation depth is the same. Drawer depth + 5 mm
No, it is only necessary to make a straight cut in the aluminium profile, without additional machining.
Available in 2.35 m and 2.9 m bars.
It is made of matt anodised aluminium, which gives it an elegant and durable finish.
It uses ball bearing slides with smooth and silent sliding, allowing it to be easily removed.
The mirror surface is 1000 mm x 340 mm and the module requires a minimum depth of 380 mm for installation.
Yes, the mirror is reversible and can be installed on either the right or left side of the cabinet.
It can pivot up to 180° on its stand to adjust its position comfortably.
No, the assembly is simple and without machining. It is simply screwed to the furniture with the included screws.
Yes, it is possible to recharge the Kaus light with a mobile phone charger. The charger needs to have a type C micro USB and should at least supply 5V DC 1A.
To obtain the correct rod length, subtract 11 mm from the enclosure or module opening dimension.
They are made of sturdy plastic with a painted finish in aluminium, mocha or textured black.
It is compatible exclusively with Luxe rectangular rods for wardrobes.
No, the kit does not include cover caps, but the design of the bracket minimises the visibility of the screws after installation.
The load capacity depends on the bar used and the fixing, but in general it is recommended not to exceed 40 kg/m, according to ISO 7170:205.
They are calculated for a side thickness of 16 mm.
The charging time will vary depending on the amperage of the charger. It is recommended to use 5V DC 1A chargers, therefore the estimated charge time is 2 hrs.
This light has a range of 400 switching cycles per charge before the battery runs out and it has an LED indicator that goes from red to green when the charge is complete following an approximate time of 2 hours.
It has a length of 2,355 mm, with a cross-section of 20 mm high and 19 mm wide.
It is made of stainless steel, with a painted aluminium finish that mimics anodising for a sleek appearance and durability.
It is compatible with doors with a minimum thickness of 16 mm.
It is held in place by a 15 mm vertical flange, with a Ø6.5 mm hole in the 20 mm longitudinal section to facilitate mounting.
Supplied in kits of 10 units, ready for installation.
They are available in three lengths: 951 mm, 2064 mm and 2229 mm.
They are made of steel with a white painted finish, which guarantees resistance and neutral aesthetics for different applications.
These are double slotted rack profiles with a 32 mm pitch, designed for use with Jagmet shelf brackets to allow the installation of wooden or glass shelves.
Each batch contains 10 profiles ready for installation.
They are ideal for wardrobes, dressing rooms, pantries and laundry rooms, allowing the creation of modular shelves with height adjustment.
It is compatible with Luxe rectangular wardrobe rails, allowing installation at a 90° angle.
It is made of zamak and available in titanium, textured black painted, aluminium painted and mocha painted finishes.
The mounting is done at the top with an M6 screw, which is included in the package.
Each unit includes 1 angle bracket and the necessary mounting screws.
The door or drawer must have a total thickness of 18 mm for the profile to fit correctly and securely.
No special machining is required. It is fixed by pressure or by means of adhesives or screws, depending on the design of the furniture and the professional. The shape of the profile allows easy integration into the door edge.
It has an open rectangle design, 10 mm high x 25.7 mm wide at the visible part. The complete handle is 30 mm high and 46 mm wide including the fixing flange.
Each unit is 2.8 metres long. Supplied in packs of 10 units, ready to cut and adapt for mass production projects or customised installations.
The packaging contains 10 units of Adige profiles, each 2.8 metres long, ready for direct installation in manufacturing processes or on-site assembly.
These brackets are designed for wooden or glass shelves with a depth of 270 mm, ensuring a stable and secure installation in storage projects or interior furnishings.
Each bracket can support up to 27 kg, provided it is properly installed on a firm wall and combined with compatible rack profiles.
They are compatible with Jagmet's 32 mm pitch double groove profile, widely used in modular adjustable shelving installations.
Each lot includes 20 shelf brackets, making it easy to source for multiple installations or large commercial or residential furniture projects.
The brackets have a height of 52 mm and a straight design that allows installation at 90° to the profile, ensuring perpendicular support of the shelf and preventing slippage.
The RAL code of the anthracite grey finish of the sides of the Concept drawer is approximately 7043.
The RAL code of the white finish of the sides of the Concept drawer is approximately 9003.
Installation requires a minimum usable depth of 445 mm, equivalent to the length of the hanger, to ensure complete sliding and correct functioning of the guide system.
The hanger is designed to be screwed directly to the sides of the module. It includes the necessary screws and does not require additional fasteners.
Yes, the hanger integrates full-extension slides with soft closing, allowing a smooth and silent movement, with no bumps when closing.
Yes, the compact and symmetrical design makes it compatible with standard and customised modules, as long as they comply with the minimum depth. It is ideal for both built-in wardrobes and open-plan dressing rooms.
The hanger is delivered pre-assembled and only needs to be screwed to the module. It includes all necessary screws for quick and secure installation.
The RAL of the white finish of the siphon guard is approximately 9003. The RAL code for the grey finish of the siphon guard is approximately 7045. The RAL code for the anthracite grey finish of the siphon guard is approximately 7043.
Yes, it can be combined with a wide range of our undermount recycling buckets. Please refer to the table below for compatibility:
The trouser rack is equipped with full-extension ball bearing slides, which provide a smooth and quiet glide. Supports up to 10 kg load.
Yes, its design is reversible: it can be installed on either the right or left side of the unit, facilitating its integration into any wardrobe or dressing room configuration.
The elastic bands prevent the trousers from slipping off accidentally, providing a secure hold without damaging the fabrics.
The product includes standard mounting hardware. No specialised tools are required: it is screwed directly to the side of the furniture.
It is made of high-quality steel and available in four finishes: chrome, titanium, painted black and stone grey. All offer high resistance to daily wear and tear.
The system has an adjustable telescopic rod that allows it to be adjusted to interior widths of between 450 and 1150 mm, depending on the reference chosen. This makes it compatible with multiple cabinet configurations.
It is easily installed by screwing it onto the side panels of the module or cabinet. Mounting hardware is included and does not require specialised tools.
The Sling folding hanger is designed to support up to 12 kg of static load, thanks to its reinforced metal structure and cushioned return system.
It is available in chrome, white or titanium finish. In addition, each unit includes cover caps to hide the fixing screws and improve the interior aesthetics of the enclosure.
Both the bottom and the back are 16 mm thick.
Yes, the Sling hanger incorporates a cushioned return system that provides a smooth and controlled descent, avoiding knocks or sudden movements that could damage the furniture or its contents.
A minimum internal depth of 480 mm is recommended to ensure that the shoe rack can be pulled out completely and comfortably without interference with the wardrobe door.
Yes, the design allows for an indistinct installation on both sides of the cabinet, which optimises the versatility of the product according to the distribution of the interior space.
The shoe rack is screwed directly to the side of the module using the screws provided. The instructions detail the anchoring points and the use of precision tools is recommended for secure fastening.
It is made of steel with an aluminium painted finish and high quality plastic components, which guarantees a strong, light and durable structure, ideal for frequent use in wardrobe and dressing room furniture.
Yes, it is fully compatible with other pull-out accessories from Emuca's Keeper or Self range, such as trouser racks, hangers or tie racks, facilitating the creation of modular dressing room solutions.
The tie rack can hold up to 30 ties, but is not designed to support heavy garments. To ensure its durability, it is recommended that it is not overloaded beyond its intended use for lightweight accessories.
The design allows for installation on either the right or left side of the module, making it versatile to suit different interior configurations.
The system is fixed by means of self-tapping screws included.
A minimum depth of 450 mm is recommended, allowing the accessory to be fully extracted without interference or blockage from the rear of the enclosure.
The aluminium is treated with a matt anodised finish, which provides a soft touch, greater durability and a modern aesthetic in keeping with high-end furniture.
Yes, it is fully compatible with other Self accessories such as the trouser rack, mirror or pull-out hanger. They all have the same design line and standard depth for joint use.
To ensure optimal functioning of the full-extension slides, the module must have a minimum depth of 800 mm.
Installation is carried out using the screws provided. It is fixed laterally to the furniture boards, which should have a recommended minimum thickness of 16 mm for secure fastening.
The hanger includes full-extension metal runners, with a useful stroke of 650 mm, allowing the bar to be fully extracted for easy access to garments.
This hanger is designed for a medium load. It supports approximately 8 to 10 hangers with clothes, ensuring smooth movement without compromising the durability of the runners.
They are designed to be used exclusively with Jagmet single groove 50 mm pitch profiles.
They are compatible with both wooden and glass shelves, as long as the shelf depth is 200 mm.
The maximum load per pair is 40 kg, ensuring a robust structure for intensive storage applications.
They must be fixed to vertical profiles mounted on the wall. Recommended for use on solid surfaces such as chipboard, melamine or masonry walls for a firm hold.
The finish is white painted, which provides a clean finish ideal for interior applications such as dressing rooms, kitchens or laundry areas.
It is necessary to use the supplement when installing the hinged hanger in cabinets with hinged doors, as it compensates for the thickness of the hinges to ensure correct alignment and operation of the hanger.
One supplement is required on each side of the hanger. In total, two units per cabinet are required for a symmetrical and functional installation.
Installation is by direct bolting to the side panel of the enclosure. The kit includes all necessary screws for fast and secure mounting.
Yes, the side extension is available in titanium, aluminium painted and white finishes, so it can be aesthetically combined with the different models of Sling folding hangers.
It is made of high-strength plastic with a painted finish, which guarantees lightness, durability and resistance to daily wear and tear, ideal for intensive use in wardrobes and dressing rooms.
These brackets are designed for 30x15 mm cross-section bars, offering a precise and stable fit inside the enclosure.
To obtain the cutting length of the bar, subtract 7 mm from the overall dimension of the internal enclosure opening, which ensures correct mounting between the two brackets.
Yes, the set includes M6x40 screws specifically for top mounting, ensuring a solid and secure fixing.
Yes, the kit incorporates a left and a right hand bracket, allowing the installation of a complete bar with support at both ends.
The system can be installed in two ways:
Side, by means of Ø3.5 mm wood threaded screw.
Top, with M6 screw, for more robust fixings.
Both methods are contemplated according to the design of the module and the needs of the project.
The system is specifically designed for cabinet rails with a rectangular cross-section of 30x15 mm, which ensures compatibility with the Silk product line. This section ensures the necessary rigidity to withstand daily use and the indicated load.
According to ISO: 7170:2005, each rod installed with its respective brackets can support up to 40 kg/metre evenly distributed. This capacity makes it ideal for heavy duty cabinets in home or contract projects.
The side brackets allow two installation configurations: screwed to the sides of the module with a Ø3.5mm wood screw or top mounted with an M6 screw, adapting to different cabinet designs.
The set includes 2 tubes, 4 side brackets, 2 centre brackets and mounting hardware. The brackets are fitted with coextruded PVC non-slip rubbers to improve the grip of the hangers and prevent them from slipping.
Each bar can support up to 40 kg per linear metre, with the load evenly distributed, according to ISO 7170:205. To guarantee this resistance, the supports must be installed correctly on stable and reinforced surfaces.
The brackets are designed for direct lateral attachment using standard hardware.
Yes, although the kit includes only lateral supports, it is possible to add central supports compatible with 30x15 mm profile to reinforce installations with greater length or concentrated load.
The bars are made of steel with a highly corrosion-resistant chrome-plated finish. The included side brackets are made of zamak with nickel-plated finish, which provides excellent mechanical and aesthetic performance.
The complete system complies with ISO 7170:205, supporting up to 40 kg per linear metre with the load evenly distributed.
Each bar has an oval cross-section of 30x15 mm and is available in three lengths: 0.75 m, 0.95 m and 1.15 m.
The included side brackets are designed for screw fixing (not included) and are fitted directly to the side panels of the enclosure. The bracket design provides a firm and secure hold of the bar, allowing quick and accurate mounting in professional environments.
Yes, the brackets are designed to be installed on chipboard, MDF or solid wood, provided that they have a minimum thickness that allows secure fastening with screws. It is recommended to use screws suitable for each type of material to ensure proper fastening.
The brackets are fastened with M5x38 mm screws (included in the kit) and are compatible with boards from 16 to 30 mm thick, ensuring safe and versatile installation in cabinets made of MDF, chipboard or solid wood.
Each bar and its supports can withstand a maximum load of 40 kg/metre evenly distributed, in accordance with the international standard ISO 7170:205, offering maximum reliability for professional furniture.
Both kits include 2 aluminium bars of 28 mm diameter, but the 1150 mm kit incorporates 2 additional central supports that reinforce the structure, ideal for installations that require greater stability and payload.
The bars are made of painted aluminium (mocha, black or matt anodised), a light and easy-to-machine material. The brackets are made of zamak, guaranteeing durability, rigidity and excellent mechanical behaviour.
This system is available in mocha painted, black painted and matt anodised finishes, allowing its aesthetic integration in contemporary or customised design cabinets. Its chromatic variety makes it easy to combine with other metal components or furniture fittings.
These brackets are specifically designed for rectangular Luxe bars. For a perfect fit, subtract 10 mm from the centre-to-centre distance of the brackets to calculate the exact length of the bar, ensuring a secure, backlash-free fit.
Fixing is by means of an M6x40 screw at the top, which provides a robust fixing. The screws are included in the kit, facilitating direct installation in structures prepared for M6 threads.
Luxe brackets are available in Titanium, Textured Black, Stone Grey, Aluminium and Moka finishes, allowing them to be aesthetically integrated into custom projects and contemporary or premium design cabinets.
To ensure precise assembly, 3 mm must be subtracted from the interaxis dimension of the brackets when cutting the bar. This tolerance ensures that the bar fits without tension or play, optimising its durability and functionality.
The kit includes M5x38 mm screws, suitable for top installation in boards with sufficient thickness to thread or fasten anchors. Recommended for installation in materials such as MDF, chipboard or wood at least 16 mm thick.
They are designed for lateral fixing (left and right) and are suitable for standard bar lengths (up to 1.15 m). For longer spans or intensive use, it is recommended to combine with compatible centre brackets to avoid bending of the bar.
The brackets are available in Titanium, Black, Aluminium and Moka finishes, allowing them to be aesthetically integrated with other hardware and metal elements of the furniture. They are ideal for projects where design and functionality must be aligned.
These brackets are designed exclusively for Ø28 mm round bars. The use of bars with a different diameter (e.g. Ø25 or Ø30 mm) may cause play, misalignment or impossibility of installation, affecting both the safety and the aesthetics of the assembly.
The Silk wardrobe rail can support up to 40 kg per linear metre, with evenly distributed load, in accordance with ISO: 7170:205, making it suitable for heavy duty applications in wardrobes and dressing rooms.
The bar incorporates a semi-rigid PVC rubber top, designed to reduce the noise of the hangers when hanging and moving them, improving the user experience and protecting both the hangers and the profile surface.
It is designed to be combined with Emuca's Keeper or Self support systems, allowing for functional and aesthetic integration into custom-designed modular wardrobe or dressing room projects.
It is available in two finishes: black painted and matt anodised. Both offer wear and corrosion resistance, but the anodised finish provides greater protection against wet environments or high traffic applications.
The Silk bar has a rectangular profile with rounded edges, ideal for stable attachment of hangers and modern aesthetics. This design also allows for a larger contact surface with accessories and improves structural rigidity.
Installation is carried out on the side of the cabinet module using screws included in the kit. The system uses ball bearing slides to facilitate partial sliding of the trouser rack and ensure a robust and durable installation.
The left or right hand side refers to the side of the cabinet where the trouser rack is fixed. It is important to select the correct version according to the cabinet layout, as the system is not reversible once assembled.
Its construction with chrome-plated steel rods and metal ball guides makes it suitable for frequent use and medium loads, typical in high-end residential environments or contract projects.
The integrated rubbers on each rod prevent the trousers from slipping or falling down when opening or closing the system, offering greater stability and protection for delicate garments or slippery materials.
It is not designed for adjustments after installation. To ensure an optimal result, it is recommended to mark and check the alignment before final screwing, especially when combined with other enclosure interior accessories.
The profile has a rectangular section of 64 x 22 mm, which gives it high structural strength, allowing the assembly of shelves, cabinets or robust modular systems with a minimalist and professional aesthetic.
Thanks to its design and the Zero fixing system, the profile can support more than 100 kg per mounting point, provided it is installed correctly with the recommended accessories and brackets.
The profile can be easily cut to size with standard aluminium tools such as disc saws or miter saws. No special tools are required for assembly, as the Zero accessories allow assembly without the need for drilling or visible screws.
It can be used with wood panels, glass, melamine boards or metal rods, allowing it to be adapted to multiple configurations such as open wardrobes, dressing rooms, hanging areas or designer shelving.
The profile is available in stone grey (RAL 7048) and textured black (RAL 9005) painted finishes, both on aluminium. These finishes offer high scratch resistance and good integration with contemporary or technical furniture projects.
Each kit includes: 1 wall mounting, 1 leveller, 1 profile connector, 1 profile cover, Complete screws: 4 screws Ø4x30, 4 dowels Ø6x30, 4 screws Ø3.5x16
The leveller makes it possible to correct small deviations in level when mounting the profile from the ground, guaranteeing a perfectly vertical structure without the need for shims or external adjustments. It is essential for installations on uneven surfaces.
Requires direct fixing to wall and floor, using the included plugs and screws. Surfaces must be masonry, concrete or structural board, ensuring a firm fixing to support loads of up to 100 kg per module.
Yes, the kit components can be disassembled and reused, provided the zamak and anchor points have not been damaged. It is ideal for demountable structures or changing modular configurations.
The kit is designed for Zero rectangular profiles used in modular structures. It is compatible with textured black painted finish (RAL 9005), and integrates seamlessly with other elements of the Zero system.
This piece acts as an anchoring element between the structural profile and the wall, providing stability and structural strength to the entire installation. It is essential for vertical fixings or floor-wall combinations.
It is made of zamak with a textured painted finish (available in stone grey or black RAL 9005). The textured finish improves aesthetic integration and surface durability.
Includes 2 screws Ø4x30 and 2 plugs Ø6x30. Only a standard screwdriver is needed, as no special tools or additional adjustment systems are required. Installation is quick and straightforward.
When combined with the profile and the rest of the Zero system, it can support loads of more than 100 kg per module, provided it is correctly anchored to structural walls such as brick, concrete or reinforced technical board.
Yes, this part is fully compatible with floor-to-wall, wall-to-wall configurations or in combination with levellers. This allows it to adapt to multiple layouts and distribution needs without compromising the stability of the assembly.
This piece allows two or more Zero profiles to be connected in a firm and aligned manner, facilitating the creation of three-dimensional structures such as frames, corner pieces or "L", "T" or "U" configurations, without the need for welding or machining.
The connection is made by means of two Ø3.5x25 screws, which are inserted directly into the profiles. Only a standard screwdriver is required, without the need for specific tools or additional adjustments.
Yes, the piece is designed for the union of 2 or 3 profiles in modular configurations, which allows greater versatility in the design of structures for cupboards, shelving or room dividers.
It is made of zamak and available in stone grey (RAL 7048) and textured black (RAL 9005), which guarantees both structural strength and aesthetic integration with the Zero system profiles.
The part ensures a stable load transmission between profiles, maintaining the rigidity of the assembly and supporting the weight of shelves or hanging bars. It is ideal for installations requiring high load-bearing capacity and assembly precision.
The leveller compensates for unevenness of up to 10 mm in floor-to-ceiling installations, ensuring the verticality and stability of Zero structures. It is especially useful in installations without wall fixing or on uneven surfaces.
Yes, the leveller is designed for both floor and ceiling mounting, offering maximum versatility. Its adjustable base allows the final height of the profile to be adjusted without the need for cutting or shimming.
It is made of zamak (internal structure and screws) to guarantee mechanical resistance, and technical grey plastic to protect surfaces and facilitate adjustment. The felt prevents scratches on delicate floors.
The leveller not only allows for height adjustment, but also transmits loads correctly to the floor or ceiling, maintaining the Zero system's load capacity of over 100 kg per module, provided it is installed according to specifications.
The leveller offers a vertical adjustment range of up to 10 mm by means of an internal thread system. Fine adjustment is made with the included Allen key, allowing precise levelling without dismantling the structure.
The brackets are designed for wooden shelves that are integrated with the Zero profile. Although the boards are not included in the kit, they must fit the inside width of the Zero profile and be of a thickness that allows secure screwing (usually between 16 and 25 mm).
The kit allows the installation of 5 shelves and contains: 5 sets of brackets (10 units), 20 screws Ø3.5x16 mm, 20 cover caps, All the elements necessary for assembly are included, except for the boards and profiles.
Each bracket is screwed directly to the wooden shelf and mounted on the Zero structural profile. No adjustments or special tools are required: a screwdriver and precise measurement of the shelf level is all that is needed.
When installed correctly, each shelf can support more than 100 kg per module, in accordance with the strength of the Zero system, provided that suitable boards are used and the profile anchorage is secured.
This batch is available in stone grey painted (RAL 7048) and textured black painted (RAL 9005), matching perfectly with the Zero profiles in the same finish to maintain a uniform and professional aesthetic.
This kit is designed for mounting tempered glass shelves on Zero system profiles. The glass must have a suitable thickness and be machined or with polished edges, depending on the final design.
Each batch allows for the installation of 5 glass shelves and includes: 5 sets of metal brackets, 20 accessory covers for embellishment and safety. Glass shelves and Zero profiles are purchased separately.
The brackets are fitted directly onto the Zero profile without the need for adjustment tools. The design of the system allows fast, precise installation without drilling into the glass, thanks to an internal clamp.
Each shelf, correctly installed in the Zero system, can support more than 100 kg per module, provided that the glass has the appropriate thickness and treatment (recommended: tempered safety glass).
Available in stone grey (RAL 7048) and textured black (RAL 9005), both on zamak, the design and finish of these brackets ensure premium visual integration in domestic, commercial and contract environments.
This set allows a complete module (such as cabinets, drawer units or closed structures) to be attached to the Zero profile system, providing a strong and aesthetic connection without the need for additional drilling of the profiles.
Kit includes: 1 set of brackets (2 pieces), 4 screws Ø3.5x16 mm, 2 M6 screws, 4 cover caps. All the necessary elements for a quick and professional installation.
No, installation is carried out without special tools. The bracket can be adjusted without tools, allowing the module position to be precisely adjusted, even after the profile has been fixed.
It is compatible with modules made of wood, melamine or technical board, which are integrated into the modular structure of the Zero system. Ideal for base cabinets, drawer units or shelving with a closed body.
Available in stone grey (RAL 7048) and textured black (RAL 9005), the brackets are made of zamak with high mechanical strength, and their design with trim caps ensures discreet and elegant integration into high-end projects.
This kit is designed to install a Luxe type hanging bar on the Zero modular profile. It is fixed by means of a lateral support, with a top cover that ensures stability and aesthetics.
The kit includes: 2 hanging rod holders, 1 set of tube fittings, 1 set of cover caps. This allows a stable fixation of the bar at two points and a professional finish.
No, the system is designed to fit without special tools. Installation is carried out on the Zero profile and does not require drilling or dismantling of components, which speeds up assembly on site or in the workshop.
Combined with a Luxe rail and the correctly anchored Zero system, it can support loads of up to 100 kg per module, ideal for wardrobes, dressing rooms and contract furniture.
The brackets are available in stone grey (RAL 7048) and textured black (RAL 9005). Made of zamak, they combine robustness with an unobtrusive appearance, integrating perfectly into contemporary or minimalist design furniture.
This kit is designed to assemble 3 wooden shelves and 1 additional module, and includes: 3 sets of shelf supports, 1 set of module supports, 16 screws Ø3.5x16 mm, 16 cover caps, Assembly instructions. Profiles, boards and modules are not included.
Zero profiles and compatible wooden or module shelves must be purchased separately. The recommended profile codes are: 7023649 (stone grey), 7023749 (textured black).
Yes, the Zero system allows adjustment without tools or disassembly. The position of the shelves or module can be easily moved and repositioned, making it ideal for flexible or reconfigurable installations.
The kit is compatible with wooden or melamine shelves and modules, as long as they have the appropriate dimensions and machining to integrate with Zero profiles. The assembly is carried out directly on the profile without additional drilling.
It is available in stone grey (RAL 7048) and textured black (RAL 9005). Both finishes are designed to visually and functionally integrate with Zero profiles in the same colour, ensuring a consistent and professional aesthetic.
The included bar is 1 metre long, compatible with Zero system brackets. It is made of steel or aluminium, depending on system specifications, and is suitable for use with medium-high loads. The diameter or cross-section is optimised to fit the specific brackets without play.
This kit requires Zero profiles (part numbers 7023649 or 7023749) and the shelf and module boards, which are not included. The structural elements of the furniture must be adapted to the Zero anchoring system.
It allows for quick installation, with no adjustment tools or disassembly required, while maintaining the load capacity of the Zero system (over 100 kg per module) and offering configuration flexibility.
Ideal for creating mixed and matching compositions:
Closed storage space (module)
Open area with shelf
Hanging area with metal rod
Perfect for dressing rooms, wardrobe areas or modular design furniture.
Available in stone grey (RAL 7048) and textured black (RAL 9005), both on zamak, they integrate perfectly with the Zero profiles in the same finish to maintain a unified and professional aesthetic.
The included bar has a length of 1,003 mm, which allows exact compensation for the tension-free fitting between profiles. This measurement already provides for the necessary clearance to fit the brackets and to avoid friction or lateral pressure.
Each shelf, correctly installed, can support more than 100 kg per module, provided that the load is evenly distributed and the boards are of adequate thickness and density.
Fixing is carried out directly on the Zero profile using screws Ø3.5x16 mm, included in the kit. No special tools are required, and there is no need to drill the profile, which speeds up assembly and protects the structure.
Yes, the system allows readjustment without disassembly of the assembly. The brackets can be moved to another height or section within the profile, allowing a dynamic and adaptable configuration to design changes or end customer needs.
Although it is optimised for wooden boards or derivatives, it can also be adapted to melamine, compact or even metallised panels, provided that they allow secure screwing. The bar is compatible with standard hangers and can be integrated into mixed-use projects (textile + storage).
This bracket is specifically designed for cabinet rails with an oval cross-section of 30x15 mm, ensuring a precise and secure fit without the need for adapters.
The bracket is mounted recessed in the side panel of the cabinet, requiring a customised cavity to be milled or drilled. This type of mounting ensures clean aesthetics and excellent structural strength.
Yes, it can be combined with specific central supports for 30x15 mm bars in long or high load installations. This allows alignment to be maintained and prevents excessive bending of the bar over 1000 mm.
The hanger is attached using two concealed screws included in the kit. It is easily installed with a standard screwdriver, without the need for special tools or additional anchoring systems.
It is made of high quality hypoallergenic rubber, which makes it resistant to moisture, scratches and daily use. This material is ideal for installations in children's environments due to its safety and durability.
Can be installed on plasterboard, wood, chipboard or painted surfaces, provided that the appropriate plugs and screws are used. Not recommended for soft or non-structural surfaces without reinforcement.
Yes, in addition to the black painted finish, it is also available in blue, which allows it to adapt to different styles of decoration in children's bedrooms or play areas.
Each hanger is installed by means of two visible screws included in the delivery. Installation is carried out with a conventional screwdriver, without the need for special tools, and is suitable for walls made of wood, plaster or technical boards.
They are made of high-strength aluminium, which gives them excellent resistance to corrosion, lightness and durability in wet areas such as bathrooms or laundry rooms. In addition, their black painted finish guarantees high resistance to scratching.
Yes, in addition to the black painted finish, it is also available in a matt anodised finish, which allows it to be integrated into more neutral or technical decorative styles, such as office or contract furniture.
Yes, its compact size and simple fixing make it compatible with modular structures or pre-drilled boards, which are widely used in modular wardrobes, walk-in wardrobes or vertical storage systems.
The set includes 7 wall hangers and the necessary installation screws for mounting. Supplied as a complete set, ready to install.
The kit includes screws Ø 4.5x40 mm and plugs Ø 5x30 mm, suitable for quick and safe installation on suitable surfaces.
The hanger is made of zamak, a resistant and easy to clean material, ideal for home applications such as bathrooms, bedrooms or wardrobes.
This model is available in chrome and black painted finish, allowing it to adapt to different styles of interior decoration.
It is designed to be adaptable to any room in the home, such as bedrooms, bathrooms or wardrobes, helping to save space by being wall-mounted.
The product is supplied with 1 wall hanger and the screws required for installation.
This model includes 3 coat racks integrated in a single piece, ideal for organising coats or accessories in different areas of the home.
It is made of steel, a hard-wearing and easy-to-clean material, suitable for both domestic and public environments.
The Hamilton hanger is available in black paint and satin nickel, allowing it to be adapted to different interior styles.
It can be installed in bedrooms, bathrooms, wardrobes or common areas of the home. It is also suitable for public spaces such as offices, libraries or restaurants.
Its function is to close and conceal the end of the Zero profile, preventing the exposed face from being exposed and improving the visual finish of the assembly.
The plug is placed at the end of the Zero profile, ensuring a clean finish on open or visible structures.
It is made of plastic, which makes it easy to install and light and resistant for use in furniture structures.
It is available in black and stone grey, allowing it to be combined with Zero profiles in the same colour.
Each unit includes 1 cap. The packaging is available in packs of 20 units per batch.
This kit allows the installation of 3 wooden shelves, using the included bracket sets.
Each 230 mm long bracket can support up to 27 kg per shelf, providing a robust structure for domestic or professional use.
All the elements of the kit are made of steel with a white painted finish, which makes them highly resistant and durable.
The system is designed to be fixed to the wall using the screws and plugs included. The 1 m profiles have a single groove, compatible with other Jagmet accessories to extend the composition.
The kit includes:
2 profiles, 1 metre long
3 sets of 230 mm brackets (right and left)
12 screws Ø4,5x60 mm
12 dowels Ø6x35 mm for wall fixing
This lot is designed to install four wooden shelves, by using the included bracket sets.
The 230 mm long brackets can hold a load of up to 27 kg per shelf, provided that the fasteners supplied are used.
The wall mounting is made by means of metal plates that allow a safe and direct installation. No profiles are included, but separate plates for each support point.
All components are made of white lacquered steel, which offers high mechanical strength and clean aesthetics for interiors of wardrobes, dressing rooms or storage areas.
This kit includes:
8 fixing plates
4 sets of 230 mm brackets (right and left)
32 screws Ø4,2x32 mm
32 wall plugs Ø6x30 mm for wall mounting
It is compatible with Jagmet rack profiles:
Single groove with 50 mm pitch
Double groove with 32 mm pitch
Each basket measures 789 x 354 x 116 mm, giving a capacity of approximately 32 litres per unit.
All components are made of white lacquered steel, which gives the system high strength and a uniform aesthetic finish for interior furnishings.
This kit is designed to create shelves with removable wire baskets, ideal for inside wardrobes, dressing rooms, laundry rooms or pantries.
The set contains:
2 removable wire baskets
2 sets of brackets (one for each basket, with left and right brackets)
The set contains:
2 removable wire baskets
2 sets of brackets (one for each basket, with left and right brackets)
It is compatible with Jagmet rack profiles:
Single groove with 50 mm pitch
Double groove with 32 mm pitch
Each basket measures 789 x 354 x 116 mm, giving a capacity of approximately 32 litres per unit.
All components are made of white lacquered steel, which gives the system high strength and a uniform aesthetic finish for interior furnishings.
This kit is designed to create shelves with removable wire baskets, ideal for inside wardrobes, dressing rooms, laundry rooms or pantries.
Each bar supports a maximum load of 10 kg, according to product specifications.
Each bar has dimensions of Ø27 x 815 mm, which makes it suitable for interior cabinet spaces.
It is compatible with Jagmet wire baskets and their shelf supports, integrating as part of the same modular system.
The components are made of white lacquered steel, offering high resistance and uniform aesthetics for the interior of wardrobes, dressing rooms or pantries.
The kit contains:
2 x 815 mm bars
2 sets of brackets (right and left)
2 sets of end caps
Each hanger measures 321 mm in length in extended position, allowing several hangers to be hung without interfering with each other.
It is suitable for space-saving areas such as walk-in wardrobes, wardrobes or laundry rooms, where a temporary, collapsible storage solution is needed.
Including 4 screws Ø4.8x42 mm and plugs Ø8x40 mm, suitable for fixing to solid walls such as brick, concrete or solid partition walls.
Installation is carried out using the screws and plugs included. No additional accessories are required, and it is fixed directly to the wall.
The design includes holes for inserting the hangers, which allows the hanger to be swung towards the wall without the hangers sliding or falling off during movement.
This tool is designed for quick and easy height adjustment or disassembly of Zero system accessories.
It can be stored in the Zero profile itself, even in non-visible areas, so that it is always available without risk of loss.
It is made of black plastic and zinc-plated steel, which guarantees durability, lightness and resistance to frequent use.
No, the product stands out for its ease of use, ideal for professional installers and also for users looking for a specific Zero system tool.
Each batch contains 1 tool, and the packaging is available in packs of 8 pieces.
The supplements or bases that are used along with the hinges have two holes for fastening to the furniture and a third hole for increasing the resistance of the hinge/supplement joint. It is especially designed for facilities that require more resistance such as on doors with pistons.
The following video shows how such a system is easily assembled:
The kit includes:
2 x 900 mm profiles
4 profiles of 127 mm
3 sets of wooden shelf supports
Fixing components, joints and 1 tool for adjusting accessories
The mounting is wall-mounted, with no need for tools to adjust or disassemble the accessories thanks to the tool included in the kit.
It is designed for wooden shelves with a depth of 330 mm, and allows a maximum height of 900 mm for the complete structure.
The structure offers a load capacity of up to 80 kg, guaranteeing stability in domestic or commercial applications.
The following video shows how such a system is easily assembled:
The profiles are made of aluminium, the fittings of zamak, and the finish is textured stone grey (RAL 7048) or textured black (RAL 9005), depending on the variant chosen.
The kit allows the assembly of two structures with one independent opening each or a structure with three independent openings, combining Zero profiles with wall fixings.
Each structure supports up to 80 kg maximum load, thanks to the zamak joints and fixings.
The kit contains:
2 accessories for profile connection
2 wall fixing accessories
2 cover plates for vertical profiles
Screws, dowels and an Allen key
No, Zero profiles and accessories such as shelf supports (wood, glass or bars) are purchased separately.
They are made of zamak with a textured stone grey (RAL 7048) or textured black painted finish, depending on the reference chosen.
No, no machining is required. Only a straight cut of the aluminium profile is required for assembly.
It is compatible with 4 mm glass doors or 10 and 11 mm thick panels.
The profiles are made of aluminium with a matt anodised finish for durability and uniform aesthetics.
No, the kit does not include connecting fittings. Only the profiles required for the structural assembly of the door are supplied.
It allows the Zero profile to be fixed to the floor and ceiling, and is used to form a continuous vertical structure in installations without wall fixing.
The leveller allows a height adjustment of 10 mm, which facilitates precise adjustment to the ceiling or floor.
It is made of zamak with a textured stone grey painted finish (RAL 7048) and grey plastic, providing robustness and uniform aesthetics.
Includes:
1 leveller
2 screws Ø4x30
2 plugs Ø6x30
1 cover
1 Allen key
1 circular felt for the base
It is ideal for free-standing Zero structures with floor-ceiling fixing, especially as room dividers in homes, offices or shops.
The profile has a length of 2.16 m and can be cut to size to fit the desired width of the shelf within the Zero system.
The bracket set ref. 7023149 is required for correct mounting of the profile as a shelf in the Zero modular structure.
According to UNE EN 16122:2013, the shelf can support a maximum weight of 120 kg, being 1.2 m the recommended length per shelf to reach this capacity.
Yes, the profile includes a cavity at the bottom designed to install an LED strip, allowing the shelf to be illuminated from below.
It is made of aluminium, with a textured stone grey (RAL 7048) or textured black painted finish, depending on the selected variant.
Includes:
2 profiles of 2,900 mm
4 rectangular levellers
4 cover caps
4 protective felts
8 dowels Ø6x30 mm
Mounting screws
1 adjusting tool
It is designed for floor-to-ceiling fixing, with simple installation. Suitable for openings up to 3,010 mm ± 20 mm.
Each shelf or module can support more than 100 kg, making it ideal for robust, heavy-duty solutions.
No, the system allows the position of the shelves to be adjusted without dismantling any element and without special tools, thanks to its design and the adjustment tool included.
The profiles are made of aluminium and the fixing accessories are made of zamak. The finish is textured black RAL 9005, suitable for demanding and decorative environments.
The shelf is designed for mounting with a maximum gap of 1.081 metres between two Zero profiles, and its effective length is 1.07 m.
According to UNE EN 16122:2013, the shelf can support up to 100 kg of evenly distributed load.
Kit includes: 2 shelf profiles 1.07 m, 1 Lynx-W profile 1.07 m, 2 shelf supports, 2 ribs to form the shelf, 2 system locking brackets, 2 M4x12 screws, 8 aluminium threaded screws Ø3.5x19 black and 4 plastic caps.
Yes, it includes a Lynx-W profile ready to add an LED diffuser of the same size or can be used as a decorative cover if you do not wish to install lighting.
The kit includes system locking brackets that prevent the shelf from unintentionally moving up or down once installed.
The following video shows how such a system is easily assembled:
The system allows a tilt adjustment of up to 120°, with 5 possible levels: 12°, 24°, 36°, 48° and 60°, in both directions.
The kit includes 2 shelf supports, 2 hooks, 4 wood screws Ø3,5x16 mm and 4 plastic caps.
No, the system is supplied without wooden shelf, only the mounting accessories are included.
The brackets are made of steel and zamak with a stone grey (RAL 7048) or textured black painted finish, depending on the model.
The tilt is adjusted by means of a knurled bolt included in the bracket, allowing the desired angle to be set precisely.
Yes, this system allows height adjustment along the entire length of the Zero profile thanks to the fixings integrated in the plates.
The fixings are made of steel and zamak, with a textured black painted finish (RAL 9005).
The kit includes 2 plates, 8 M4x12 mm screws and 4 plastic caps, ready for mounting on the Zero modular structure.
Yes, the system is valid for any Hang hanger width.
The Zero fixings included in the kit lock the system to prevent unwanted upward or downward movement.
The following video shows how to assemble such a box in a simple way:
The system is suitable for installation in openings up to 3,140 mm ± 20 mm when fixed directly between floor and ceiling.
Including 2 profiles of 2900 mm, 4 circular levellers, 4 cover caps, 4 protective felts, 8 dowels of Ø6 mm, 8 mounting screws and 1 adjusting tool.
The profiles are made of aluminium and the connection and support accessories are made of zamak, with a textured stone grey painted finish (RAL 7048).
No, installation is simple and requires no special tools or dismantling of height adjustment elements.
The Zero system with floor-ceiling fixing allows a load capacity of more than 100 kg per shelf/module, thanks to its reinforced lashing mechanism.
Each set contains: 1 wall mounting, 1 leveller, 1 profile connector, 1 profile cover, 4 screws Ø4×30, 4 dowels Ø6×30, 4 screws Ø3,5×16 and the necessary accessories for installation.
It is designed for the "L" assembly of the Zero modular system, fixing the profile to both the floor and the wall.
The components are made of zamak with a textured stone grey finish (RAL 7048) and grey plastic.
No, the Zero system is characterised by assembly without the need for special tools or disassembly of components.
The system can support more than 100 kg per shelf or module, increasing the clamping force as weight is added.
The following video shows how such a system is easily assembled:
Includes 2 x 1150 mm tubes, 4 side brackets, 2 central brackets and the screws required for installation.
It is mounted on the top of the cabinet with the included M6x40 mm screws, which fix the side brackets.
According to ISO: 7170:205, the bars can support up to 40 kg per linear metre with evenly distributed load.
The bars are available in 750 mm and 1150 mm lengths. Each tube is fitted with a co-extruded PVC rubber which reduces noise when hanging and moving the hangers.
The tubes and supports are made of aluminium and plastic, with a painted finish in stone grey (RAL 7048) or textured black, depending on the model.
The following video shows how such a system is easily assembled:
The following video shows how to assemble such a box in a simple way:
This magnetic lock has a holding force of 3.2 kg, ensuring that the door remains securely closed.
The magnet is screwed to the surface of the cabinet. The magnet is placed inside the cabinet and the metal plate on the door.
It is ideal for furniture with hinged doors in kitchens, bathrooms, wardrobes and other interior furniture where a secure and discreet closure is required.
It is made of steel and plastic with a white finish, which gives it strength and aesthetic integration into different types of furniture.
Yes, each lot includes 20 magnetic closures and 20 metal plates for installation.
The following video shows how such a system is easily assembled:
The following video shows how such a system is easily assembled:
The following video shows how this system works:
This hinge is specifically designed for glass doors with a thickness between 4 and 6 mm, providing a firm and stable hold.
To install the bushing, it is necessary to drill a 9 mm hole in the base of the furniture where it will be placed. Then, the hinge is fixed by pressing the glass with screws, ensuring that it does not move.
It is made of stainless steel with an aluminium painted finish, giving it greater resistance to corrosion and an aesthetically pleasing design.
Each package contains 200 pieces, divided into 100 hinges for the right side and 100 for the left side.
It does not require intensive maintenance, but it is recommended to clean periodically with a dry cloth or a specific metal cleaner to maintain its appearance and functionality.
The following video shows how this system works:
The elbow hinge allows the door to partially retract into the cabinet when closed, preventing it from protruding out to the side. It is ideal for furniture with partially overlapping doors or in applications with multiple doors in a row.
The X95 hinge allows adjustment in three directions:
Height by means of the mounting base.
Depth with the eccentric screw on the cup.
Sideways with the lateral adjustment screw.
It is designed for wooden or MDF doors with a thickness of 14 to 26 mm and a cup bore of Ø35 mm.
Yes, the 165° X95 hinge can be integrated with additional dampers for softer closing or push-to-open systems to eliminate the need for handles.
The bore diameter should be 35 mm, with a depth of 11.5 mm and an edge clearance of 3 to 7 mm, depending on the required fit.
The X12 hinge allows precise adjustments by eccentric adjustment:
Height: ±2 mm
Depth: ±2 mm
Side: ±1 mm
This guarantees perfect alignment of the door even in installations with small variations.
For fixing the X12 hinge, screws with a diameter of 3.5 to 4 mm and a length of 12 to 16 mm are recommended, depending on the furniture material.
A properly installed X12 hinge can support up to 8 kg per unit. It is recommended to install at least two hinges on doors up to 600 mm high and three or more on larger doors.
This hinge is designed for doors from 12 to 18 mm thick. If the door is thicker than this, the hinge cup may not align properly and affect the opening and closing of the door.
No, the X12 hinge is designed exclusively for wooden doors or derivatives. For glass, specific hinges with pressure or adhesive fixing are required.
The following video shows how this system works:
The X12 elbow hinge is designed for partially overlapping doors, which means that the door covers only part of the side of the furniture. In contrast, the X12 straight hinge is used for fully overlapping doors.
The X12 elbow hinge has a 26 mm diameter cup and allows a 95° opening angle, which facilitates easy access to the inside of the furniture.
No, the X12 elbow hinge is specifically designed for doors 12 to 18 mm thick. If the door is thinner or thicker, the installation may not be suitable and may affect alignment and locking.
Screws with a diameter of 3.5 to 4 mm and a length of 12 to 16 mm are recommended, depending on the furniture material.
The three-dimensional adjustment allows the following settings:
Height: ±2 mm
Depth: ±2 mm
Sideways: ±1 mm
These adjustments help to correct any misalignment after assembly.
The X12 super elbow hinge is designed for furniture where the door must fully retract into the furniture frame. In contrast, the X12 elbow hinge allows the door to partially overlap the side of the furniture.
The X12 super elbow hinge has a 26 mm diameter cup and an opening angle of 95°, providing convenient access to the furniture.
Snap-on (clip): SKU Model 1271607, facilitates quick installation without the need for additional tools.
Screw-on: SKU Model 1270507, for traditional screw installation.
Yes, this hinge allows three-dimensional adjustment, which facilitates perfect alignment of the door:
Height: ±2 mm
Depth: ±2 mm
Side: ±1 mm
It is recommended to install it on doors with a thickness between 12 and 18 mm, as a smaller or larger thickness could affect its correct functioning.
The X12 supplement allows the height of the X12 hinge to be adjusted to correct the alignment of the door. It is particularly useful when the door is not perfectly aligned with the furniture after initial installation.
This model is available in two versions:
Height -2 mm (SKU 1270607): Reduces the hinge position by 2 mm.
Height 0 mm (SKU 1270707): Maintains the standard position without changing the height.
It is designed for use with X12 hinges that require a 26 mm diameter cup, ensuring accurate installation on wooden doors.
It is fixed to the furniture with screws.
The X12 hinge is mounted on the supplement, adjusting the desired height.
It allows small corrections to be made to the alignment of the door without dismantling the entire hinge.
It is made of steel with a nickel-plated finish, which provides high corrosion resistance and increased durability in kitchen, office and home furniture.
The X12 Euro supplement is specifically designed for hinges with Euro system, which allows faster fastening by means of pre-installed screws and adjustment by means of eccentrics.
Height -2 mm (SKU 1270807): Reduces the height of the hinge by 2 mm.
Height 0 mm (SKU 1270907): Maintains the standard height without modification.
This supplement is compatible with X12 hinges with Ø26 mm cup, used on wooden doors. Its adjustment system is ideal for hinges with Euro mounting, ensuring fast and accurate installation.
It is attached to the furniture using the integrated screws.
The hinge is mounted directly on the supplement and is adjusted by means of the eccentric adjustment.
Its mounting system facilitates adjustments without the need to dismantle the hinge.
It is constructed of steel with a nickel-plated finish, which provides high corrosion resistance and increased durability in kitchen, office and home furniture.
The supplement is designed to support the standard X12 hinge load, allowing an even distribution of the door weight. However, the final strength will depend on the type of material it is installed in and the number of hinges used.
This supplement is compatible with wooden doors between 12 and 18 mm thick, as it is specifically designed for use with Ø26 mm X12 cup hinges.
The height of the supplement affects the positioning of the hinge and the alignment of the door:
Height -2 mm: Allows adjustments to correct minor door misalignments.
Height 0 mm: Maintains standard alignment with no change in hinge position.
Not recommended, as it is specifically designed for the X12 hinge series with Ø26 mm cup. For compatibility with other hinges, it is best to consult the manufacturer's specifications.
The supplement allows for three-dimensional adjustment, which facilitates perfect alignment of the door through height, side and depth adjustments when used with compatible hinges.
The front attachment kit is designed specifically for the 141 mm high Vantage-Q internal drawer. It is compatible with square side rails, allowing the installation of front panels in internal storage systems.
This product requires direct mounting on the side and front panels of the drawer. It is recommended to be installed on clean, flat surfaces using the included fixings. The modular design allows for precise adjustment to ensure a tight and aligned installation.
The set is made of high quality plastic with a grey or white finish. This material combines lightness with excellent impact resistance, guaranteeing durability in everyday environments.
The design of the hooks ensures a robust fixing between the front panel and the side rails. In addition, it acts as a reinforcement in the corner of the drawer, preventing unwanted movement and ensuring stability over time.
This accessory is designed according to Emuca quality standards to ensure reliability. Although no specific international standards are specified, its optimised design minimises risks of assembly and use, providing safety in storage facilities.
The 138 mm Concept rib is an add-on part designed to provide additional support and stability for Concept drawer systems. It is intended exclusively for mounting on the right-hand side of the drawer.
The rib has a height of 138 mm and available depths of 350 mm or 450 mm, depending on the version selected. Its robust design allows for additional support and improves the drawer's resistance to daily loads.
It is made of high-quality steel with an anthracite grey finish. This material guarantees durability, wear resistance and modern aesthetics.
The assembly of the rib is carried out by fixing it to the drawer using screws, which are installed in the front and rear parts. It is a simple procedure that requires no specialised tools or prior preparation.
The packaging contains 20 units per pack. Available depths are 350 mm (SKU 3107435) and 450 mm (SKU 3107635), adapting to different storage needs.
The set of side rails improves storage in the drawers, allowing objects to be placed in an organised manner and preventing them from shifting during use.
These rails are available in depths of 270 mm (SKU 3015725) and 300 mm (SKU 3015825). The choice depends on the size of the drawer and compatibility with the drawer structure.
They are made of plastic and aluminium, with a metallised aluminium finish. These materials offer a combination of strength, lightness and modern aesthetics.
For their installation, it is necessary to have the specific rear and front brackets that allow them to be correctly fixed to the structure of the box.
These rails are designed for Vantage-Q drawers and are available in different lengths (from 270 mm to 500 mm) to suit different drawer depths.
The siphon saver allows a gap to be left at the back of the drawer to facilitate the passage of the sink drain pipe, optimising storage space.
It is available in sizes 200 mm, 350 mm and 550 mm wide, with finishes in white, aluminium and anthracite grey, allowing it to adapt to different styles of furniture.
Installation is simple and is carried out by fixing the part with screws to the drawer. A screwdriver is recommended to ensure a firm hold. Screws are not included in the kit.
It is ideal for kitchen and bathroom furniture, especially in drawers under sinks or washbasins where free space is required for pipework.
It is made of steel, which provides high resistance to moisture and durability in environments of frequent use, avoiding deformation or damage over time.
The 105 mm Concept rib is an essential side panel for assembling the drawer structure, providing additional stability and support to ensure durability in daily use.
It is installed on the left side of the caisson and helps to reinforce the structure, preventing deformation and ensuring smooth operation by supporting the movement of the caisson.
This rib is available in a depth of 350 mm (SKU 3106735). The choice of depth depends on the size of the drawer and the space available in the cabinet.
It is made of steel with an anthracite grey finish, which provides high resistance to wear and tear and a sleek, modern design that blends in easily with different styles of furniture.
This rib is designed specifically for the Concept drawer system, so its compatibility with other models will depend on the manufacturer's specifications and the design of the furniture.
The trim cover hides the joints between the ribs and the front panel of the Ultrabox drawer, providing a more aesthetically pleasing and uniform finish.
It is made of high quality plastic, which makes it durable and easy to clean, keeping it looking like new with minimal maintenance.
Yes, this lid is compatible with all Ultrabox drawers, regardless of their dimensions.
Installation is simple and requires no tools or adhesives, as it fits snugly over the joint between the ribs and the front panel.
It is ideal for kitchen and bathroom furniture, where a cleaner and more decorative finish is sought without leaving the drawer joints visible.
The set of side rails serves as a limit to prevent objects inside the drawer from falling over the sides, without adding extra weight or affecting the comfort of use.
They are made of steel or plastic, offering durability and an aesthetic design. They are available in white painted and aluminium painted finishes, allowing them to be combined with different styles of furniture.
Available in depths of 300 mm, 350 mm, 400 mm and 550 mm. The choice depends on the size of the drawer and the desired storage capacity.
For installation, rear and front hooks are required to fix them correctly to the drawer structure, ensuring stability and functionality.
These rails are designed for higher drawers and are recommended for use in storage systems compatible with square rails, such as the Vantage-Q model.
The Ultrabox drawer consists of two steel side ribs and drop locking slides, which give it stability and strength. It is delivered with the hitch mounted on the rib, facilitating installation.
Each drawer supports up to 25 kg load, making it ideal for kitchen, bathroom and office furniture applications where safe and sturdy storage is required.
The clamping system allows ±2 mm eccentric adjustment vertically, facilitating fine adjustments to ensure precise alignment and optimal closure.
No, the bottom of the drawer does not require machining, which simplifies the assembly process and reduces installation times.
Yes, this drawer is compatible with soft closing systems, although they are not included in the lot. For implementation, it would be necessary to purchase additional components compatible with the Ultrabox system.
The H56 siphon saver is distinguished by its reduced height of 56 mm and its thin-walled design, which allows for a more discreet and efficient integration into the interior of the drawer.
It is ideal for drawers with a reduced rear panel height of 56 mm and a panel thickness of 16 mm, and can be fitted in drawers with a minimum depth of 250 mm.
It is made of high quality plastic and is available in white, grey and anthracite grey finishes, which allows it to adapt to different styles of bathroom furniture.
It is installed by screwing it to the back of the drawer, without the need to machine the bottom. It is quick and easy to fix, without the need for specialised tools.
Its reduced height allows a better optimisation of the space in the drawer, maximising storage capacity without interfering with the structure of the furniture.
What load capacity does the system support and how is it distributed?
What tools and machining are necessary for its installation?
Where is the hanger installed and what type of wall anchor is used?
How is the position of the module adjusted once it is hung?
What materials make up the kit and what advantages does it offer in demanding environments?
The following video shows how you can easily assemble the Slim drawer.
The RAL code of the anthracite grey finish of the sides of the Slim kitchen, household and bathroom drawer is approximately 7043.The RAL code of the white finish of the sides of the Slim kitchen, household and bathroom drawer is approximately 9003. Although it is necessary to bear in mind that the white silk colour of said drawer is metallized and the RAL codes are for flat colours.
Yes, the bottom and the back of the Slim drawer have the same measurements for both the soft closing runners and the push runners.
It is recommended to mount the guide rail synchroniser with push for the Slim drawer on units with a width of more than 600 mm.
It is recommended to mount the guide rail synchroniser with push for the Slim drawer on units with a width of maximum than 1,200 mm.
No, each drawer has a synchroniser accessory.
