The difference between the hidden Slippe rails with a hook as opposed to those that do not have a hook, is the possibility of disassembling the drawer with a simple click.

The adjustment of the hidden runners for Slippe drawers without a hook is achieved by turning the washer on the front fastening pivot, which is screwed for that purpose.

The Lynx Premium LED strip has an output of 9.6 W/m and a luminous efficacy of 94 lm/W. It provides a luminous flux of 910 lm/m, ideal for continuous lighting applications over long lengths.

It is powered by a 24V DC power supply and requires an LED converter (not included). Installation is simple thanks to the 15 cm cables soldered at both ends of the 10 m roll, making it easy to connect.

The strip is available in two colour temperatures: natural white (4,000 K) and warm white (2,700 K). It has an illumination angle of 120°, suitable for uniform and wide-range illumination.

It is dimmable and can be cut every 100 mm to suit different needs. This allows the length to be customised according to available space or specific applications.

It is manufactured with a double-layer PCB for durability and thermal efficiency. In addition, it includes a 3M® 300LSE adhesive tape, which ensures secure and stable attachment to a variety of surfaces.

The inclined profile has dimensions of 25 mm horizontal x 18.4 mm vertical at its highest section. Its 30° inclination facilitates installation on horizontal surfaces, providing an optimum angle for indirect lighting. It is compatible with wood, MDF, and other rigid materials, provided that screws or adhesives suitable for the base material are used.

Matt anodised aluminium has excellent heat dissipation properties, helping to maintain an optimum temperature in LED strips and prolonging their lifetime. This is especially important in installations with continuous use or in enclosed spaces.

The profile is compatible with standard LED strips up to 10 mm wide. The internal tabs ensure a firm fit, preventing displacement even in case of vibrations or frequent handling.

To fix the profile, it is recommended to use the specific brackets available or high-strength adhesives. On flat surfaces, the lower flanges allow direct fixing, while on uneven surfaces it is ideal to pre-level the installation area to ensure stability.

Yes, the profile complies with standard manufacturing and anodising standards, ensuring durability and corrosion resistance, which are key factors in indoor LED lighting applications.

The Micron LED Sensor allows the light intensity to be dimmed in a range of 5% to 100%, easily controlling the brightness via the integrated touch switch. This functionality allows the lighting to be customised according to the needs of the space.

It is compatible with 12V DC and 24V DC electrical systems. The input and output are designed to support up to 24W at 12V DC and 48W at 24V DC, offering a wide versatility for different lighting applications.

The sensor is IP44-rated, making it resistant to dust and exposure to liquids, such as small splashes. This feature ensures durability in indoor environments that may be subject to such conditions.

The included AMP distributor has 6 inputs allowing up to 6 luminaires to be connected and controlled simultaneously. Its design facilitates quick connection via AMP connectors, ensuring a tidy and efficient installation.

For installation, it is recommended to follow these steps: Verify that the electrical system operates within the 12V or 24V DC range. Connect the sensor and the AMP distributor using the supplied connectors, ensuring correct polarity. Fix the sensor on a suitable surface, avoiding areas with direct exposure to excessive moisture. Check that the luminaires are correctly connected before switching on the system.

No, 24V Lynx strips are not compatible with 12V Lynx strip accessories.To make 24V Lynx strips work, it is necessary to have a 24V LED converter and SPECIAL 24v H cable including a Miniled connector, so the whole range can work with said connection.12 V Lynx sensors are not compatible either. They work at 12V, but can be used with most sensors in the Emuca catalogue admitting 24V or working at 230V AC.

Within the available sensor range, you can opt for a Red Eye or Point 240 V AC sensor or a Dot, Point, Micron or Twelfy 12V/24V sensor.In the case of 12V/24V DC sensors, bear in mind they will need a set of 12V/24V DC sensor accessories to be easily and quickly connected. They may convert their connections from AMP to Miniled.

The Aquarius LED spotlight has an output of 7W, a luminous flux of 480 lumens and a cool white colour temperature of 6000K, providing bright and functional lighting for spaces such as bathrooms.

The IP44 certification ensures that the spotlight is protected against splashing water and small solid objects, making it ideal for use in wet areas such as bathrooms.

Installation is simple: the spotlight is supplied with the necessary screws to fix it to glass surfaces, table tops or furniture. Simply mark and drill the mounting points and tighten the screws to secure the spotlight in position.

The opal diffuser distributes the light evenly and eliminates reflections or glare, creating a pleasant ambience and improving the aesthetics of the lighting.

No, this LED spotlight does not need an additional converter, as it is designed to be connected directly to a 230V AC socket, simplifying installation and reducing additional costs.

The following video shows how you can easily install the aforementioned LED lighting.

The RF Emitter works as a wireless switch, sending a radio frequency signal to the Smart RF receiver (not included). It allows the luminaire to be switched on, off or dimmed by a sensor that detects the movement of the hand, without direct contact.

The sensor has a detection range of 3 cm, allowing the luminaire to be controlled without touching the device, offering convenience and practicality in use.

Yes, it is possible to pair up to 6 receivers with one RF emitter or link up to 6 emitters to the same receiver. This makes it possible to manage several luminaires from a single emitter or different emitters depending on the needs of the space.

The RF Emitter uses a CR2450 battery, which provides a battery life of approximately 550 on/off cycles or up to 14 months in standby mode.

Installation is simple and can be done using double-sided adhesive or screws, both of which are included in the package. This makes it easy to attach to furniture, walls or other surfaces.

The RF emitter with Smart motion sensor detects the presence of a human body within its detection range. When activated, it switches the luminaire on and automatically switches it off after 30 seconds if no further motion is detected.

The sensor has a detection range of 90° and a length of 2.5 metres, allowing it to detect movement over a wide area. It keeps the luminaire active as long as it detects presence in its range.

It is possible to pair a transmitter with up to 6 receivers, and a receiver can be connected to up to 6 transmitters. This makes it possible to manage several luminaires in a flexible and practical way.

It is powered by a CR2450 battery, which provides up to 600 on/off cycles or 16 months standby time. The battery can be easily replaced when needed.

It is installed with double-sided adhesive or screws, both included. It is ideal for spaces such as corridors, staircases, dressing rooms and wardrobes, where automatic switching is particularly useful and efficient.

The sensor detects when a door is opened or closed within a range of 6 cm, automatically switching the luminaire on or off. It works wirelessly by sending radio frequency signals to the Smart RF receiver.

The detection range is 6 cm, allowing installation on furniture with single or double doors. The sensor lens is positioned so that each side detects the movement of a specific door.

Up to 6 receivers can be linked with one emitter and 6 emitters with one receiver, providing flexibility to manage multiple luminaires.

It uses a CR2450 battery, which lasts approximately 12 months in standby mode or 500 on/off cycles. The battery is easily replaceable.

It is installed with double-sided adhesive or screws, both included in the kit. Installation is simple and suitable for everyday cabinets or similar spaces.

The RF receiver receives radio frequency signals emitted by the RF Smart emitters, controlling 12V DC or 24V DC LED luminaires. It has a maximum range of 5 metres.

It is possible to link 1 transmitter with up to 6 receivers and 1 receiver with up to 6 transmitters, providing flexibility in multiple installations.

To pair, simply press the pairing button on the receiver and then on the transmitter for 10 seconds. The same process is used to unpair.

It can be installed concealed in different environments such as dressing rooms, kitchens, bedrooms or living rooms. It is versatile and discreet, suitable for various types of projects.

The kit includes 1 receiver and a double-sided adhesive for quick and secure installation.

The sensor detects motion within a range of 90° and up to 2.5 metres. The timer switches the luminaires off after 60 seconds without motion detection and restarts when motion is detected again.

This sensor can be connected to a Smart converter to manage several luminaires simultaneously with a single sensor. It is compatible with 12V DC or 24V DC luminaires, supporting a maximum power of 36W for 12V DC and 72W for 24V DC.

The sensor requires machining with a diameter of 12 mm to be integrated into the furniture. It is fixed by means of a mounting accessory and screws included.

It includes a 1.5 m cable with Miniled connection and an additional 1 m for the lens. This facilitates integration into Miniled systems for quick and easy installation.

Ideal for passageways, dressing rooms, wardrobes, hallways and stairwells in homes or commercial facilities, providing comfort and energy efficiency through automatic switching on and off.

The sensor has a detection range of 10 cm and is activated when the furniture doors are opened or closed. It is ideal for furniture with double doors, as it is installed in the centre and controls the lighting regardless of which of the doors is opened or closed.

It is compatible with 12V DC or 24V DC converters, supporting power ratings of 36W at 12V DC and 72W at 24V DC. It integrates with LED luminaires from Miniled systems.

No machining required. Can be mounted directly onto the surface of the furniture using the included double-sided adhesive accessory or screwed for a more permanent fixing.

It can be connected to a converter to manage up to 6 secondary luminaires with Miniled connection from a single sensor.

This sensor is ideal for wardrobes, dressing rooms and other furniture that require automatic switching on and off when opening or closing their doors, offering convenience and energy efficiency.

The app allows you to switch on, switch off, adjust the intensity (dimmer) and create customised scenes for different times of the day or home environments. In addition, voice commands can be sent.

This receiver can control up to 5 LED luminaires connected via the Miniled connectors, ensuring simultaneous control.

Yes, the receiver is compatible with Google Assistant and Alexa, allowing full control of the lights via voice commands.

It can be paired with up to 6 RF transmitters. The process is simple: press the pairing button on the receiver and the transmitter for 10 seconds. To unpair, repeat the procedure.

It is easily installed on the converter output with Miniled connections. Its compact design allows for concealed location with a maximum range of 5 metres from the RF transmitter.

Combines the functionality of a hand switch and a proximity sensor for doors. This allows luminaires to be controlled by waving a hand in front of the sensor or by opening/closing a door, depending on the required configuration.

It has a detection range of 10 cm. It is triggered automatically when it detects the user's hand or when it interferes with the sensor field when a door is opened or closed.

Yes, the sensor can be connected to a Smart converter to control the simultaneous switching on and off of all connected luminaires. In this type of installation, the sensor manages a maximum power limit of 36W at 12V DC and 72W at 24V DC.

It can manage up to 6 ports or secondary outputs via Miniled connections, allowing independent on/off switching of several luminaires with a single converter.

The sensor can be surface mounted using a double-sided adhesive accessory or recessed into furniture thanks to its compact design. It includes a 1.5 m cable with Miniled connections and components for easy installation.

It is suitable for high demand lighting applications requiring up to 7A of current, such as in dressing rooms, kitchens and commercial or residential environments.

It offers a VH-2Y connection at the main end, designed to connect to the high power outputs of the Smart converters (60W, 80W, 90W and 100W).

The terminal block allows quick, manual connection without the need for additional connectors, optimising current flow and improving efficiency.

The cable supports a maximum current of 7A, ideal for 84W to 168W systems with voltages of 12V DC and 24V DC.

It is compatible with Smart converters and 12V DC and 24V DC LED luminaires, used in various spaces such as dressing rooms, living rooms and kitchens.

Yes, as the Volans light functions at 230V AC therefore it does not need any extra converter.

The handle is made of aluminium with anodised or painted finishes, which guarantees high resistance to corrosion, durability and an aesthetic design adapted to different styles of furniture.

Yes, the Sharp 18 handle is compatible with sliding door systems such as Placard 74, and is specifically designed for installation on 18 mm thick boards.

The handle is available in 2.5 m and 2.9 m lengths, allowing it to be cut and adjusted to fit different cabinet configurations.

The sliding door system combined with the Sharp 18 handle supports a maximum weight of 70 kg per door, providing stability and security in daily use.

The RAL of the white gloss finish on the rails and handles of the Placard sliding door system is approximately 9003. The RAL of the anthracite grey finish is approximately 7043. The RAL of the black finish is approximately 9011.

The Wave 16 handle is specifically designed for 16 mm thick boards. It is essential that the board is straight, without irregularities, and compatible with the profiles used in Placard 74 systems.

This handle is available in 2.35 m and 2.7 m lengths, in white painted, black painted and matt anodised finishes. These options offer flexibility to suit different furniture styles and designs.

The handle design includes an ergonomic grip function that makes it easy to open and close the doors. In addition, the robust construction enhances the durability of the system, especially in frequently used applications.

In Placard 74 systems, the Wave 16 handle does not require additional reinforcement if installed correctly on 16 mm boards. However, it must be ensured that the top and bottom profiles and carriages are correctly fixed to guarantee the stability of the system.

The RAL of the white gloss finish on the rails and handles of the Placard sliding door system is approximately 9003. The RAL of the anthracite grey finish is approximately 7043. The RAL of the black finish is approximately 9011.

Our LED converters do not have the necessary characteristics to work together with dimmers in the primary voltage (110 ~ 240V AC, 50 ~ 60Hz).However, we do have devices that can regulate the intensity (dimmer) in the secondary voltage (12V-24V DC). These can be:- Lynx switch/dimmer (cod. 5203620). - Spirit switch/dimmer (cod. 5022617). - Micron switch/dimmer (cod. 5053125). - Dot switch/dimmer (cod. 50228).

The RAL of the white gloss finish on the rails and handles of the Placard sliding door system is approximately 9003. The RAL of the anthracite grey finish is approximately 7043. The RAL of the black finish is approximately 9011.

The Sharp 16 handle has an ergonomic grip function and provides robustness and strength when opening and closing sliding doors in Placard systems.

It is made of high quality aluminium with a painted finish available in colours such as white, black, matt and gold, ensuring corrosion resistance and a modern aesthetic design.

The handle has a length of 2.7 m and 2.35 m, which makes it suitable for large cabinets, and can be cut to size according to customer requirements.

Yes, it is compatible with the Placard 74 sliding door system and other similar systems that require a robust and functional handle design.

The RAL of the white gloss finish on the rails and handles of the Placard sliding door system is approximately 9003. The RAL of the anthracite grey finish is approximately 7043. The RAL of the black finish is approximately 9011.

The Style 16 handle is designed to provide a robust and ergonomic grip when opening and closing sliding doors, ensuring strength and durability.

It is made of aluminium and is available in white painted and matt anodised finishes, offering modern design and corrosion resistance.

The handle has a standard length of 2.7 metres, allowing it to be adapted to doors of different dimensions by cutting to size according to the customer's needs.

Yes, the Style 16 handle is compatible with Placard sliding door systems, especially the Placard 74 system, and other similar systems.

The following video shows how you can easily install the aforementioned LED lighting.

The Xirivella handle is made of aluminium with a matt anodised finish, which guarantees resistance and a modern design.

The handle has a length of 64 mm and an interaxis of 32 mm, ideal for various furniture applications.

Yes, the Xirivella handle is perfect for kitchen, bathroom, home and office furniture, thanks to its versatile and durable design.

Yes, the product includes M4 screws required for easy and secure installation.

Yes, the Xirivella handle can be installed both horizontally and vertically, adapting to different furniture designs.

The lot includes 20 Paiporta handles and all the M4 screws necessary for their installation, individually packed to avoid knocks and scratches.

The handle is suitable for kitchen, bathroom, home and office furniture and can be installed on both horizontal and vertical doors.

Installation is carried out by fixing the handle with the M4 screws included in the package, ensuring a firm and durable hold.

The Paiporta handle is made of zamak, a robust and corrosion-resistant material, ideal for prolonged use.

It is available in various finishes, such as chrome, painted black, painted aluminium and satin nickel, to suit different styles and preferences.

The RAL number of the white finish on the rails and handles of the Placard sliding door system is approximately 9003. The RAL code of the anthracite grey finish is approximately 7043. The RAL code of the black finish is approximately 9011.

In order to get the door to sit flush with the unit, with the Gilder sliding system, you need to take into account the dimensions of the following diagram:

Each wheel must be inserted into a Ø15 mm hole previously drilled in the door, with a depth of 11 mm. The hole must be centred and drilled with a 35 mm diameter drill bit.

This kit is designed for sliding doors up to 20 kg. For higher loads, Emuca has specific solutions with ball bearings and damping.

Yes. The design of the Glider top rollers incorporates an adjustment system that allows the height of the door to be adjusted within a range of up to 4 mm.

The wheels are made of technical plastic with a metal axle, and the anchoring system uses zamak. This combination guarantees wear resistance and quiet running.

The package includes 1 set of carriages (top and bottom), 4 self-tapping screws and fasteners. It is suitable for 1 sliding door only.

The slides have a length of 705 mm and are designed for kitchen environments. They are ideal for a folding table that can be extended from a drawer.

The module should have a width of 450 to 1200 mm and a minimum depth of 500 mm to ensure the stability and functionality of the system.

The system allows a surface of 705 mm to be extended and supports a load of up to 60 kg, making it suitable for everyday functional use.

The system includes the hinged extension rails for connecting the panels, screws and mounting instructions sheet. Support panels are not included.

The slides are manufactured from extruded aluminium with a stainless steel anodised finish, providing corrosion resistance and modern aesthetics for high-end kitchens.

The following video shows how you can easily assemble the abovementioned storage system in a kitchen.

The Luna cup is designed for boards up to 16 mm thick, being compatible with the most common thicknesses in home or bathroom furniture shelves.

Requires pre-machining with a Ø20 mm diameter housing, which can be carried out on the underside of the module or shelf where the cup is to be inserted.

Yes, the compact design and white or brown plastic finish allow for unobtrusive integration into the furniture, ideal for both open and interior shelves.

It acts as a plug-in support for shelves and shelves, providing a secure connection without the need for screws, which facilitates the assembly and disassembly of the shelves.

The Luna cup offers a hidden and resistant joining system, avoiding visible fittings and improving the aesthetics of the furniture without compromising the stability of the shelf.

The adjustable angle allows an opening of between 30° and 180°, offering great flexibility in installation. This feature facilitates adjustment at different corner junctions, optimising installation without compromising the visual finish.

Available in heights of 60, 80, 100, 120, 150 and 165 mm. Each package contains 10 pieces of the adjustable angle.

The product incorporates skirting gaskets on both wings. These joints are located on the inside face of the angle, ensuring a continuous, clean and professional external appearance.

It is made of aluminium with a matt anodised finish. It makes it a durable solution even in damp kitchen environments.

It is particularly suitable for kitchen baseboards, allowing precise installation in corners and junctions without the need for complex cuts, guaranteeing a functional and aesthetic seal.

The profile is fixed to the wall by means of concealed brackets included in the kit, ensuring a clean and stable fixing. It is recommended to mount on resistant surfaces that guarantee the grip of the dowels Ø6 mm and screws supplied.

It includes 3 adjustable brackets with ±5 mm adjustment, allowing the profile to be aligned to ensure a perfectly horizontal installation, even on walls with small irregularities.

Yes, the 1.1 m long profile can easily be cut to size by straight cutting, allowing it to be adapted to smaller spaces or special kitchen configurations.

This profile is designed for the Titane modular range and includes compatibility with shelves, roll holders, hooks, knife holders, cutlery holders and tablet holders, all designed to hang directly without additional tools.

It is made of aluminium and zamak with an anthracite grey finish, which provides high resistance and a modern design, ideal for contemporary kitchen furniture projects and intensive use.

The following video shows how you can easily assemble the Lunch+39 mechanism.

The kit incorporates 40 self-adhesive silicone drops, which are placed on the base of each tray to prevent movement during the opening or closing of the drawer, ensuring stability without the need for mechanical fixing.

They are made of heavy-duty transparent plastic, which makes the contents easily visible, enhances product durability and withstands heavy use in domestic or commercial environments.

Yes, the design allows cubes to be stacked and combined between different kits, which is ideal for projects where modularity and adaptability in drawer distribution is required.

The kit includes 6 cubes of 75x75x54 mm, 3 cubes of 75x151x54 mm and 1 cube of 153x153x54 mm, which allows a flexible and customisable layout according to the width of the drawer, facilitating its integration in customised projects.

Yes, its waterproof material and closed design make it ideal for use in damp environments such as kitchens and bathrooms, preventing moisture build-up or deterioration.

The following video shows how to assemble such a box in a simple way:

This magnetic lock has a holding force of 3.2 kg, ensuring that the door remains securely closed.

The magnet is screwed to the surface of the cabinet. The magnet is placed inside the cabinet and the metal plate on the door.

It is ideal for furniture with hinged doors in kitchens, bathrooms, wardrobes and other interior furniture where a secure and discreet closure is required.

It is made of steel and plastic with a white finish, which gives it strength and aesthetic integration into different types of furniture.

Yes, each lot includes 20 magnetic closures and 20 metal plates for installation.

The following video shows how this system works:

The following video shows how this system works:

The following video shows how this system works:

The following video shows how this system works:

The quick click system allows for quick and easy installation without the need for additional tools, making it easier to assemble and disassemble the drawer in case of maintenance.

These slides are ideal for kitchen, bathroom and office furniture where drawers with soft closing, stable sliding and easy access without the need for full-extension are required.

Slippe slides allow a vertical adjustment of ±4.5 mm, which facilitates the alignment of the drawer and ensures a precise fit, especially useful in furniture with multiple drawers.

They are made of steel with a zinc-plated finish, which provides high corrosion resistance and long-lasting sliding, as well as incorporating delrin rollers for a smoother movement.

Yes, these slides can be installed in drawers with different panel thicknesses, provided that the recommended dimensions for fixing and correct alignment of the locking mechanism are respected.

The Concept slide has a load capacity of up to 30 kg, making it ideal for medium to large drawers in kitchen, bathroom and general storage furniture.

It incorporates a soft-close system that reduces the impact when closing the drawer, providing a smooth and silent movement, which improves the user experience and prolongs the life of the mechanism.

It is available in depths of 350 mm and 500 mm. The choice depends on the size of the drawer and the space available in the cabinet where it will be installed.

The guide is made of steel with a zinc-plated finish, which guarantees a high resistance to corrosion and wear, ensuring a long service life even in heavy-duty environments.

It is installed on the left side of the drawer with screws. The drawer rib is placed on top of the slide to allow sliding. No specialised tools are required for assembly, but it is essential to align the slide correctly to ensure optimum sliding.

This 131 mm high model offers more storage capacity compared to lower versions, without compromising the accessibility and stability of the drawer.

The 3D adjustment allows the drawer front to be adjusted in three directions: ±2 mm vertically by means of an eccentric, ±1 mm horizontally and inclination of +1.5/-4 mm, ensuring precise adjustment.

It is available in depths of 270 mm, 300 mm, 350 mm, 400 mm, 450 mm, 500 mm and 550 mm, with finishes in white painted, aluminium painted and anthracite grey.

The drawer supports up to 40 kg load thanks to its synchronised full-extension slides with cushioned closing, which ensure smooth, shock-free movement.

The cabinet must have a board thickness of 16 mm at the bottom and back of the drawer to ensure a stable installation and optimal adjustment of the adjustment system.

At Emuca, we make it easy for you. Here you can download this Excel file that will help you configure your drawer unit step by step. Simply enter the module measurements (height, thickness, overlap, etc.) and specify how many drawers you want. This file allows you to:

• Automatically calculate the machining dimensions of the drawer fronts (H1, H2, H3...) (mm).
• Determine the height of each drawer front (mm).
• And obtain the machining dimensions required to manufacture the drawer fronts (X, Y) (mm).

It also includes visual representations so you can check the result and avoid errors. Ideal for carpenters, designers or DIY enthusiasts who want a practical and accurate solution.

If a warning message appears when you open the Excel file, close the file. Right-click on the downloaded file and select Properties. At the bottom of the window, tick the box Unblock. Click Apply and then OK. You can now open the file.