PUER FREE ----x---- -T - LNE

37 / 8432393183886

Product features

Documentation

Frequently asked questions


The diameter of hole that is used for the euro screws is 5 mm, as prior drilling is required to assemble those screws.

The proximity touch sensor integrated in the Kaus LED wall light switches the luminaire on when it detects movement at a distance of 7 cm. To switch it off, simply wave your hand in front of the sensor again.

The rechargeable battery has a capacity of 850mAh, offering a battery life of up to 400 power-on cycles of 20 seconds each. Charging time is approximately 2 hours using a conventional 5V DC 1A mobile phone charger (not included) and a micro USB type C cable (included).

Yes, the wall light allows you to adjust the colour temperature between 3000K, 4000K and 6000K with a touch of the touch sensor. This allows it to adapt to different lighting needs.

The package includes a rechargeable LED wall light, as well as adhesive metal bases and screws for optional mounting. It is easily installed by attaching it to metal surfaces or using the included adhesive tapes, without the need for additional tools.

The proximity sensor has a detection range of 7 cm and automatically switches off after detecting a second movement, optimising battery usage and ensuring efficient power consumption.

The following video shows how you can easily install the aforementioned LED lighting.

When this happens, it is necessary to bear in mind that the controller switches on the output switch when it detects the movement of a human body.That is to say, the controller does not detect the movements of objects, for example the movement of a door.Also, in order for it to detect movement, it is necessary to cut across its detection range. The MOTION sensor has a detection range of 2 metres and an angle of 90º.

The distributor cable allows up to 6 LED luminaires to be connected and managed simultaneously via a single 12V or 24V sensor.

It uses a Miniled connection, ideal for LED lighting systems compatible with this type of connection.

Yes, it is fully compatible with Miniled sensors operating on 12V DC and 24V DC.

The cable is 10 cm long, making it easy to connect several luminaires to a single sensor output.

The kit includes 1 distribution cable with 6 outlets and 1 inlet with Miniled connection, made of plastic with black finish.

The app allows you to switch on, switch off, adjust the intensity (dimmer) and create customised scenes for different times of the day or home environments. In addition, voice commands can be sent.

This receiver can control up to 5 LED luminaires connected via the Miniled connectors, ensuring simultaneous control.

Yes, the receiver is compatible with Google Assistant and Alexa, allowing full control of the lights via voice commands.

It can be paired with up to 6 RF transmitters. The process is simple: press the pairing button on the receiver and the transmitter for 10 seconds. To unpair, repeat the procedure.

It is easily installed on the converter output with Miniled connections. Its compact design allows for concealed location with a maximum range of 5 metres from the RF transmitter.

The choice of a system for Agile One lifting doors depends on the height and the weight of the furniture door. To do so, you simply need to follow these simple steps: 1. Check the height and weight of the furniture door. 2. Once you have obtained the values you need to calculate the strength of the spring, S = H * (W + 2 * Wh), in terms of: H = Height of the door in mm. W = Weight of the door in kg. Wh = Weight of the handle in kg. You can choose the lifting system according to what interval the strength of spring S falls under. The MEDIUM interval is between 500 and 1,500, HIGH between 960 and 2,350. For example, we have a door with a height of 400 mm and a weight of 5 kg, with a handle that weighs 0.22 kg. The strength of the spring would be S = 200 * (5 + 2 * 0.22) = 1,088. Therefore, we would choose the HIGH strength range because it is in the interval of 960 and 2,350.

The channel Placard bottom rail is available in lengths of 2.35 m and 3.9 m, allowing it to be adapted to different door and cabinet sizes.

The rail is made of matt anodised aluminium, which guarantees high corrosion resistance and a modern and durable appearance.

The rail is fixed to the underside of the cabinet by means of screws, using the holes already provided. It is designed to facilitate installation and ensure alignment of the sliding doors.

The track is compatible with Placard system sliding doors, designed for board thicknesses of 16 mm. It supports doors up to 70 kg, offering a smooth and stable movement.

The track has a channel design with a height of 5.5 mm and a width of 66 mm, providing precise guidance for the doors. Its aluminium construction ensures stability and strength.

The bottom profile acts as a guide to prevent the doors from swinging and to ensure stable sliding. The centring devices ensure precise alignment of the doors during closing.

The bottom profile has a length of 1360 mm and each package includes one unit of the product, designed for easy installation in Folding Concepta3 systems.

Yes, the profile is compatible with board thicknesses between 18 mm and 26 mm, allowing it to be adapted to different sliding door configurations.

The centring devices align and stabilise the doors during movement, preventing lateral displacements and improving closing accuracy.

It is made of matt anodised aluminium, offering high wear resistance, long-lasting durability and an elegant design that complements the aesthetics of the Folding Concepta3 system.

The handles of the Torrent range are made of matt anodised aluminium, offering a modern design and high durability.

The dimensions of each handle are 120 mm in length, with an interaxis of 96 mm, suitable for multiple applications.

The set includes 10 handles and is available in matt anodised finish, ideal for kitchen, bathroom or office furniture.

M4 screws are included with each handle to ensure correct and easy installation.

Yes, the handles can be installed both horizontally and vertically, adapting to the needs of the furniture.

The RAL number of the white finish on the rails and handles of the Placard sliding door system is approximately 9003. The RAL code of the anthracite grey finish is approximately 7043. The RAL code of the black finish is approximately 9011.

The Clipo 15 system is designed for completely concealed installation, without the need for visible machining on the outside of the furniture. This makes it an ideal solution for kit furniture or minimalist design, where clean aesthetics and no exposed hardware is a priority.

Thanks to its compatibility with thicknesses between 16 and 19 mm and its load capacity of up to 15 kg per door leaf, it is an optimal choice for lightweight doors in melamine, MDF or thin plywood, without compromising the stability or smooth gliding of the door.

The press-fit assembly allows for quick and error-free installation, reducing time on production lines and on-site assembly. In addition, it eliminates the need for specific tools, which favours its use in modular or DIY furniture.

Yes, the Clipo 15 does not interfere with the installation of LED strips, light profiles or opening sensors, as all components are concealed in the upper part of the module. This makes it particularly attractive for functional furniture projects with integrated technology.

The Clipo 15 allows a height adjustment of ±1.5 mm by means of its integrated adjustment system. This functionality is key to correcting minor deviations after installation, ensuring perfect alignment between doors and interference-free closing.

These castors are perfect for occasional furniture, filing cabinets, mobile pedestals, service trolleys or mobile tables. Their discreet design and grey rubber tread make them suitable for both office and home environments where functionality and neutral aesthetics are sought after.

The recommended layout is to mount the 2 braked castors at the front (user accessible side) and the 2 non-braked castors at the back. This allows easy immobilisation of the furniture when in use and freedom of movement when it needs to be moved.

The rubber reduces the noise level when moving, improves grip on the floor and prevents scratches on delicate surfaces such as parquet or vinyl. It also provides a smoother ride, ideal for indoor areas with frequent traffic.

We recommend the use of wood screws with a coarse thread Ø4 mm and a minimum length of 16 mm. The assembly must be carried out on rigid structures of the furniture, such as drawer bottoms or base reinforcements. An electric screwdriver with torque control will facilitate assembly without damaging the material.

With a capacity of 30 kg per castor and a metal axle with glide bearing, this lot is ready for frequent moves. It is ideal for furniture that requires regular mobility without compromising stability or component wear.

The following video shows how you can easily assemble the Moka accessories.

The integrated ball bearings in the Mak wheels significantly improve the glide, allowing smoother, quieter and less stressful turning even under load. This translates into superior manoeuvrability and increased durability in heavy use.

With a diameter of 80 mm and a load capacity of 50 kg per castor, this batch is ideal for installation in mobile office furniture, storage trolleys, commercial displays or ancillary equipment in hotels and public areas.

The kit includes mounting screws for fixing to wood and derivatives (chipboard, MDF or plywood). For installation on sheet metal or structural steel, it is recommended to replace them with sheet metal screws or rivets as appropriate.

The 2 castors with brake incorporate a mechanical locking system that simultaneously stops the rotation and rotation of the support. The brake is operated from the outside of the castor, in an accessible position, guaranteeing total immobility of the furniture.

Yes, provided that the diameter and overall height are equivalent. However, to ensure homogeneous behaviour and uniform aesthetics, it is recommended to keep the same model (Mak) in all 4 mounting positions.

The following video shows how you can easily assemble the Hang Moka wardrobe lifts.

The RAL of the finish of the accessories for inside Moka wardrobes and dressing rooms is approximately 8019.

Each castor can support up to 25 kg, allowing a total load of 100 kg per kit, ideal for office or bedroom drawer units with moderate weight.

These castors are mounted by means of an M8 threaded bolt, which facilitates direct and secure attachment to the furniture without the need for additional plates.

No, this specific model consists of 4 wheels without brakes. It is ideal for applications requiring free and continuous movement.

They are designed to provide a smooth and quiet glide, ideal for environments such as offices and youth dorms where noise-free mobility is valued.

The castors are made of steel and black plastic, providing good resistance to continuous use and a discreet, professional aesthetic.

No, this base is press-fitted directly onto the Bone riser without the need for additional tools, making it quick and easy to assemble in industrial or modular kitchen environments.

Yes, it is compatible with the Noline and Plasline socket ranges, allowing secure integration with their respective socket front fixing clips.

The side wings guarantee a stable hold of the modules, especially when used in combination with feet and plinths, preventing unwanted shifting in technical furniture installations.

The base has 10 Ø10 mm drill holes that allow additional fixing to the module when greater stability is required or for applications requiring specific fastening standards.

Yes, with its large footprint and direct attachment to the Bone foot, it is suitable for both plinth installations and furniture solutions without a visible bottom plinth.

It is recommended to use a Ø5 mm drill bit to ensure precise insertion of the Euro screw. The drill hole should have a minimum depth of 11 mm and should be drilled to tight tolerances to avoid looseness or breakage of the material.

This screw is optimised for wood-based materials such as chipboard, MDF or melamine. Its design allows for strong fastening without the need for metal inserts, making it ideal for quick assembly of demountable furniture.

Emuca Euro screws are manufactured to DIN standards and meet TSCA Title VI assembly system strength requirements, offering maximum compatibility with modular structures in kitchen and office furniture.

The ideal torque for this screw is between 3.5 and 4 Nm. It is recommended to use torque-controlled screwdrivers to avoid head deformation or damage to the fastening material, especially in low-density boards.

The zinc plated finish provides superior corrosion protection and improves screw adhesion in porous materials. It is ideal for applications in humid environments or furniture that require a long service life without surface rust.

This bolt is specifically designed to achieve invisible and structurally sound joints in bed, wardrobe and kitchen unit assemblies. It is ideal for use in configurations that require maximum strength with no visible elements on the outside of the furniture.

The solid bolt has a diameter of 6 mm and a total length of 33 mm, making it easy to mount in robust structures. In addition, it has an M6 thread and is installed in a ø6 mm hole, offering precision and strength.

It is optimised to work in conjunction with K12 cams, ensuring a firm and stable hold on heavy duty furniture. This combination allows for concealed internal fastenings without compromising the aesthetics of the design.

The zinc-plated finish provides a protective coating against corrosion and rust, making it ideal for wet environments or kitchens. This treatment prolongs the life of the hardware and maintains its functionality in demanding conditions.

The solid bolt comes in boxes of 2,500 units, which allows for efficient stock management in industrial operations and large assembly lines, reducing logistics costs and optimising production times.

To install this bracket it is necessary to drill a Ø 5 mm hole in the vertical panel where the bracket's fastening bolt will be inserted.

The plastic pad is 3.5 mm thick and provides a firm and tight base that prevents the glass shelf from slipping or vibrating, improving the stability of the assembly.

The holder has a 15.75 mm long, 11 mm wide and 13.5 mm deep body. These dimensions make it compatible with most standard glass shelves.

It is ideal for glass shelves in bathroom furniture, display cabinets, living rooms or kitchens where a discreet, resistant and aesthetically pleasing nickel-plated finish is required.

The bracket is made of nickel-plated zamak for strength and durability, while the glass support area is made of transparent plastic to avoid scratches and to improve the aesthetics of the mounting.

The following video shows how you can easily install the ironing board.

Each divider is 500 mm wide by 310 mm deep, so the cabinet or shelf must be at least 310 mm deep for proper installation.

The dividers are fixed by means of screwed clips with no fixed position, allowing them to be installed either at the back or at the bottom of the unit. This versatility makes it easy to adapt them to different storage configurations.

They are made of steel with a chrome-plated finish, which gives them corrosion resistance and a shiny finish that goes well with high-end kitchen or storage furniture.

Yes, the kit includes 4 metal spacers, fixing clips and screws, allowing immediate installation without the need to purchase additional components.

They are ideal for use in industrial kitchens, storage cupboards, shop shelves or office organisation spaces, allowing spaces to be compartmentalised in a robust and aesthetically pleasing way.

The holder has a total length of 280 mm and has 4 storage lines, which allows you to organise several cups in a practical and efficient way depending on the type and size of the model.

There must be a free bottom surface (such as a shelf, cabinet base or countertop) that allows the bracket to be bolted to and is at least 280 mm deep.

Installation is simple and is carried out by screwing the bracket directly to the inside of the furniture, whether on shelves, cupboards or under counters. The necessary screws are included.

It is made of chrome-plated steel, which ensures easy cleaning, and a shiny finish that makes it compatible with domestic or professional kitchen environments.

Yes, because of its durability, ease of access and compact design, it is ideal for bars, restaurants or industrial kitchens that need to optimise storage space for glassware.

We would like to remind you that in the case of folding-door or hinged-door assembly, the hanger must go with the lateral supplement.

For optimal installation, the module should have a minimum depth of 500 mm and an internal width of between 360 mm and 520 mm.

The fastening is carried out by means of screws included in the set. The system is anchored directly to the base of the module, guaranteeing a firm and durable fastening without the need for additional machining.

It is made of steel with a white painted finish, which gives it a clean aesthetic, high resistance to wear and tear.

Yes, the cover can be removed for washing or replacement. It is designed for ease of maintenance and to fit compatible standard size covers (945 × 310 mm).

Yes, the system has metal guides with a full-extension stop, which lock the board when fully extended, providing stability during use.

The bar is telescopic and adjustable in different models, with widths ranging from 450 mm to 1150 mm, depending on the selected reference.

The folding hanger can hold a maximum load of 12 kg, making it ideal for hanging clothes and other items in the wardrobe.

It is mounted on the side panels of the cabinet or cupboard. For cabinets with hinged doors, we recommend the use of the Hang side extension (codes 7085025, 7085107, 7085107 and 7085049).

It is made of steel and plastic, with finishes in chrome, mocha painted, black painted and stone grey painted, to adapt to different styles of wardrobes.

It has a soft damping system with automatic return, which makes it easy to access the higher areas of the cabinet without effort.

It is made of steel with welded wire and has a mocha coloured painted finish, ensuring durability, strength and an aesthetic design compatible with modern cabinets.

It is mounted by means of the tabs on its four corners, which allow it to be easily anchored to any compatible bracket in the cabinet.

It is available in three sizes according to width: 475 mm, 675 mm and 775 mm. The drawer height is 173 mm and the sides measure 454 mm each.

Yes, it is possible to recharge the Kaus light with a mobile phone charger. The charger needs to have a type C micro USB and should at least supply 5V DC 1A.

The charging time will vary depending on the amperage of the charger. It is recommended to use 5V DC 1A chargers, therefore the estimated charge time is 2 hrs.

This light has a range of 400 switching cycles per charge before the battery runs out and it has an LED indicator that goes from red to green when the charge is complete following an approximate time of 2 hours.

A minimum internal depth of 480 mm is recommended to ensure that the shoe rack can be pulled out completely and comfortably without interference with the wardrobe door.

Yes, the design allows for an indistinct installation on both sides of the cabinet, which optimises the versatility of the product according to the distribution of the interior space.

The shoe rack is screwed directly to the side of the module using the screws provided. The instructions detail the anchoring points and the use of precision tools is recommended for secure fastening.

It is made of steel with an aluminium painted finish and high quality plastic components, which guarantees a strong, light and durable structure, ideal for frequent use in wardrobe and dressing room furniture.

Yes, it is fully compatible with other pull-out accessories from Emuca's Keeper or Self range, such as trouser racks, hangers or tie racks, facilitating the creation of modular dressing room solutions.

The following video shows how such a system is easily assembled:

The following video shows how to assemble such a box in a simple way:

The following video shows how such a system is easily assembled:

The following video shows how such a system is easily assembled:

The following video shows how this system works:

At Emuca, we make it easy for you. Here you can download this Excel file that will help you configure your drawer unit step by step. Simply enter the module measurements (height, thickness, overlap, etc.) and specify how many drawers you want. This file allows you to:

  • Automatically calculate the machining dimensions of the drawer fronts (H1, H2, H3...) (mm).
  • Determine the height of each drawer front (mm).
  • And obtain the machining dimensions required to manufacture the drawer fronts (X, Y) (mm).

It also includes visual representations so you can check the result and avoid errors. Ideal for carpenters, designers or DIY enthusiasts who want a practical and accurate solution.

If a warning message appears when you open the Excel file, close the file. Right-click on the downloaded file and select Properties. At the bottom of the window, tick the box Unblock. Click Apply and then OK. You can now open the file.