We have a table for calculating the weight of a door, which is necessary to know when choosing guy ropes and measurements.Depending on the material of the door, as well as its dimensions, the result will be the weight of the door (kg) that you can use to calculate to the necessary strength of the measure (Kg x cm).

In order to guarantee an optimal closing, the installation must include a 35 mm diameter cup hole, respecting a drilling range of 3 to 7 mm and ensuring compatibility with door thicknesses from 14 to 26 mm.

The damping piston controls the movement of the doors, ensuring smooth and quiet closing, which protects the hinges and prolongs the life of the furniture in heavy use environments.

Respecting the 3 to 7 mm drilling tolerances ensures that the hinge fits tightly into the cup, avoiding unwanted movement and guaranteeing a stable installation.

Three-dimensional adjustment allows height, side and depth adjustment, correcting misalignments and ensuring that the doors are perfectly aligned with the furniture frame, even in bespoke designs.

The nickel or titanium finish protects the hinge against corrosion and wear, offering a durable solution for applications in kitchens, bathrooms or environments with high humidity and continuous use.

Nickel-plated steel provides excellent corrosion and wear resistance, making the hinges ideal for wet or greasy environments such as kitchens and bathrooms, prolonging their service life.

The drilling range of 3 to 7 mm ensures a stable fixing of the hinges, preventing misalignment of doors and allowing precise installation even in demanding configurations.

The correct functioning of the soft closing is guaranteed by the damping piston, which absorbs impacts when closing the door, reducing noise and protecting both the hinge and the furniture from intensive use.

The three-dimensional adjustment allows adjustments of +/-2 mm in height, side and depth, correcting misalignments and ensuring perfect closing even on doors with complex installation.

These hinges comply with international quality and resistance standards such as ISO 9001, ensuring durability and performance in furniture subjected to intensive use and demanding conditions.

Yes, the soft closing for the Padplast office drawer is compatible with the 27 mm high Paddock guide rails with partial extraction and the 35 mm high Paddock guide rails with total extraction, aside from the 45 mm high Paddock guide tails with total extraction because it already has soft closing.Also, the soft closing for the Padplast office drawer is not compatible with the anti-overturn Paddock lock.

The Atom multiconnector features a Schuko F-type plug (EU) with a maximum power rating of 3,000 W - 13 A, two USB type A connectors with 5V DC output (1 x 2A and 1 x 1.5A), and an HDMI 2.0 connector. This allows a wide range of electrical and electronic devices to be connected.

The manual lift-off lid features a soft-close closure for safe and convenient access to the connectors. In addition, its design includes an LED power indicator for a clear display of the device's status.

It is installed by machining on surfaces of 113 x 116 mm. Brackets and screws are included in the scope of delivery, ensuring a firm fixation and easy mounting on desks or work tables.

The USB ports are ideal for charging mobile devices, tablets and other electronic equipment, while the HDMI 2.0 connector is suitable for connecting displays, projectors and other AV devices.

The multi-connector is made of a combination of plastic and aluminium with a black painted finish, providing resistance to wear and tear and a modern design that integrates perfectly into any office or home space.

The multi-connector includes: 2 Schuko-type sockets (max. 3000W, 13A) for household appliances and electronic equipment. 1 USB Type A and 1 USB Type C port for charging devices (max. 15W). 1 HDMI 2.0 connector for high-definition video transmission. 1 unshielded RJ45 port for standard Ethernet connections.

To install it, the cabinet must have a space of 225x111 mm and a maximum thickness of 36 mm. The multi-connector is fixed with brackets and screws included, and no additional tools are required for final adjustment.

The USB ports are compatible with devices such as smartphones, tablets and electronic accessories. Maximum charging capacity is 15W (5V/3A, 9V/2A, 12V/1.5A), enabling fast charging on compatible devices.

The auto-lift lid allows easy access to connectors and sockets with a simple touch. When not in use, the cover hides the ports to maintain a clean and tidy appearance.

The RJ45 connector is suitable for standard networks, but because it is not shielded, it is more susceptible to interference in environments with high electromagnetic emission. It is recommended for home or office use where interference is minimal.

The sensor has a detection range of 6 cm, which allows it to be activated precisely when a hand is swiped or a door is opened, depending on the configuration.

Yes, the sensor is fully compatible with 12V DC and 24V DC LED systems, supporting maximum power ratings of 36W at 12V DC and 72W at 24V DC.

The sensor has a small sensor head (8 mm diameter) that can be easily embedded in the furniture by drilling a hole. It also includes all the necessary accessories for fixing.

Yes, it can be connected to a Smart converter with control port, allowing simultaneous switching on and off of all connected luminaires. In addition, it supports connection to the 6 Miniled ports of the converter for independent control of the luminaires.

The sensor is made of plastic with a black finish, providing durability and resistance. It also features low power consumption and protection against electrical and electromagnetic interference.

Yes, the Kuma light requires a more powerful converter as it has USB ports for recharging smartphones and tablets. If you wish to use those USB ports in order to recharge devices, the light's consumption will be greater.It is thus recommended to use at least a 30W converter, code. 7001320 for the use of a single light and a 50W converter code. 5008420 for the use of 2 lights.

The auxiliary tray measures 396x120x146 mm, providing a compact but efficient space for storing small garments, accessories or similar items.

The tray is easily mounted on the Hack pull-out frame and is fully compatible with other accessories such as the trouser rods, shoe rack and organiser drawer, creating a versatile modular system.

It is made of plastic with a semi-transparent finish, making it resistant to moisture, easy to clean and suitable for use in a variety of locations, such as the bathroom or dressing room.

Yes, the tray can be used as a stand-alone item. It is ideal as a toy holder in children's rooms, an organiser in bathrooms or even for storing cleaning products.

The tray is designed to support the typical weight of lightweight garments and accessories. Its design optimises weight distribution, ensuring stability when attached to the Hack frame.

The frame is adjustable to fit enclosure modules with an internal width of 560 mm to 594 mm, complying with 600 mm module standards.

The rods are made of aluminium with high-quality plastic finials, while the frame combines aluminium and textured plastic, ensuring durability, lightness and resistance to wear and tear.

The stability of the trouser rods is ensured by a design that allows them to fit firmly into the frame, preventing displacement during use.

The soft-close guide system provides a smooth and quiet glide, protecting garments and improving the wearing experience by avoiding jerky movements.

The kit includes an adjustable frame, seven trouser rods, a set of runners and the necessary screws. Assembly is simple, as all that is required is to fix the slides to the inside of the wardrobe and adjust the frame to the desired width.

The Revalock child safety lock for doors and drawers is ideal for preserving child safety, as it prevents children from being able to open furniture. Among other things, it is very useful for installing in caravans or boats, ensuring they are locked.Its installation and functioning is very simple, a magnet (key) deactivates the lock and makes it open. It is also possible to block it, so it stops working and it is not necessary to have a key to open it. This is very useful when it is no longer necessary.

The following video shows how you can easily install the the contemporary child safety lock, Revalock.

Yes, the Revalock safety locks have a template for the installation of each lock and an assembly instructions sheet for each packaging box.

The following video shows how you can easily install the aforementioned the Atom 14 multiconnector.

The following video shows how you can easily install the aforementioned the Atom 26 multiconnector.

The Rhodes cabinet handle has a length of 2.3 metres, suitable for large cabinet doors.

The Rhodes handle is made from aluminium with a black painted or matt anodised finish, ensuring durability and a modern design.

Yes, the Rhodes handle can be installed both horizontally and vertically on 18 to 20 mm thick boards.

To install the Rhodes handle it is necessary to pre-machine 25x7 mm to embed the handle into the edge of the panel.

Yes, the handle includes the screws necessary for its assembly, facilitating installation in furniture.

The Sedaví handle is made of zamak with an aluminium painted finish, offering strength, durability and a modern design.

The handle has a length of 137 mm and an interaxis of 128 mm, which makes it suitable for various types of furniture.

Yes, the Sedaví handle is ideal for kitchen, bathroom, office and other spaces, thanks to its functional and aesthetic design.

Yes, it includes the necessary M4 screws to facilitate immediate installation.

The handle can be installed in either horizontal or vertical orientation, adapting to the requirements of the furniture.

The Prague handle is made of zamak, a strong and durable material that ensures a long service life.

The dimensions of the handle are 195 mm overall length and 160 mm spacing, ideal for standard sized furniture.

The handle finish is painted aluminium, offering a modern and elegant design that adapts to any style of furniture.

Yes, the handle includes M4 screws, which are necessary for quick and accurate installation.

The packaging contains 20 units of Prague handles, perfect for multiple installation projects.

The Castellón 160 handle is made of aluminium, which guarantees lightness, strength and durability.

The handle has a length of 172 mm and an interaxis of 160 mm, making it ideal for various types of furniture.

The design has a symmetrical and minimalist aesthetic, ideal for modern and elegant environments.

Yes, the handle includes M4 screws, allowing for quick and easy installation.

This model has an elegant chrome finish that gives it a shiny and aesthetic appearance.

The handles of the Torrent range are made of matt anodised aluminium, offering a modern design and high durability.

The dimensions of each handle are 120 mm in length, with an interaxis of 96 mm, suitable for multiple applications.

The set includes 10 handles and is available in matt anodised finish, ideal for kitchen, bathroom or office furniture.

M4 screws are included with each handle to ensure correct and easy installation.

Yes, the handles can be installed both horizontally and vertically, adapting to the needs of the furniture.

The Glasgow furniture handle is made from aluminium with a matt anodised finish, ensuring strength and durability, as well as a modern and attractive design.

Yes, the Glasgow handle is designed to be installed both horizontally and vertically, adapting to different styles and needs.

The Glasgow handle has a mounting hole spacing of 64 mm, which makes it easy to install on standard furniture.

The batch of 25 Glasgow handles includes M4 screws required for installation and each handle is individually packaged to prevent knocks and scratches.

The Glasgow handle is available in various lengths: 84 mm, 148 mm and 180 mm, to suit different sizes of furniture.

The Panama knob has a diameter of 20 mm, ideal for furniture of different styles and sizes.

It is made of zamak with a chrome-plated finish, ensuring durability and elegant design.

Includes a 25 mm M4 screw, suitable for easy installation in various types of furniture.

Yes, this knob is perfect for use on kitchen, bathroom, home or office furniture.

Each knob is individually packed to avoid knocks and scratches during transport and storage.

The Pasadena handle has a 180 mm spindle and a total length of 240 mm.

It is made of steel with a textured black finish, giving it durability and a sleek design.

Yes, it is necessary to drill holes on the outside of the door to attach the handle correctly. The design facilitates a comfortable and secure grip.

It is compatible with wooden doors between 35 and 45 mm thick, designed for sliding door systems.

The kit includes an exterior handle, mounting plate and screws, all individually packaged to prevent damage during transport.

The SOB Free-cut 8x3mm LED strip has a high-strength 3M® double-sided adhesive, ideal for installation on flat, clean surfaces. Application on aluminium, lacquered wood, glass or non-porous surfaces is recommended to ensure optimal fixation. For rough or textured surfaces, the use of aluminium profiles with structural adhesive is suggested.

The LED strip can be cut every 6.9 mm without affecting its operation. For connection, we recommend using Lynx-Z Miniled cable, which allows for a secure connection without the need for soldering. This minimises material waste and facilitates installation in confined spaces.

It complies with IP20 safety regulations, which means that it is protected against solid objects larger than 12.5 mm, but not against liquids. In addition, its silicone-coated SMD LED technology guarantees thermal stability and reduced UV emission, contributing to the safety of its installation in furniture and indoor spaces.

The SOB Free-cut 8x3mm LED strip offers a power of 9.6 W/m with a luminous flux of 1240 lm/m. It is available in two colour temperatures: neutral white 4000K and warm white 2700K, which allows it to adapt to different environments and applications in furniture and decorative lighting.

Yes, the SOB Free-cut 8x3mm LED strip is compatible with connectors and sensors (not included in the package) that allow on/off control and light intensity regulation. The use of compatible controllers with 24V DC power supply is recommended to ensure optimal performance.

The MiniSOB 4.5x3mm LED Strip includes a 3M® double-sided adhesive, designed to guarantee a secure installation on flat, clean surfaces such as aluminium, lacquered wood and glass. For rough or textured surfaces, the use of aluminium profiles is recommended to improve adhesion and dissipate heat.

The strip is supplied in lengths of 1m, 3m and 5m, all with a 1.5m power cable at both ends and Miniled connectors. This allows the strip to be cut to the necessary length and both ends reused without wasting material, facilitating installation in confined spaces.

This strip is IP65 certified, meaning it is protected against dust and low-pressure water jets, making it suitable for installation in kitchen cabinets, bathrooms and other areas at risk of splashing. It is not submersible and should be installed in areas without direct exposure to excessive moisture.

The MiniSOB 4.5x3mm LED Strip has a power rating of 7.2 W/m and a luminous flux of approximately 720 lm/m, ensuring uniform illumination without visible points of light. It is available in two colour temperatures: -Neutral white (4000K): ideal for functional and modern environments. -Warm white (2700K): recommended for cosy and decorative environments.

Yes, the LED strip is compatible with connectors and sensors, except Lynx sensors. To regulate the intensity, the use of 24V DC controllers is recommended, ensuring optimal operation and greater control over the lighting.

The following video shows how you can easily assemble the Moka accessories.

The gap between the side of the module and the frame / rails of the Moka closet or dressing room interior accessories is 9mm.

Yes, you simply need to respect the minimum installation depth of the Moka runners and carry out the assembly with the clips that are supplied.

Direct mounting requires an 18 mm diameter, 10 mm deep circular cut-out on the back of the base. This housing allows the clamp to be press-fitted, ensuring a firm hold without the need for visible screws.

Yes, the clamp is compatible with wooden skirtings between 10 and 18 mm thick. Its design allows for a certain margin of tolerance, facilitating assembly on standard skirting boards used in modular kitchens or technical furniture.

The clamp is compatible with the full range of Emuca Bone levelling feet (fixed, adjustable, screw base or direct mount). It attaches easily to the side groove of the foot without the need for additional tools.

Screw mounting offers a more versatile installation, especially useful when the plinth has not been pre-machined. Direct mounting provides cleaner aesthetics and is ideal for fast assembly lines in production.

It is made of high-strength technical plastic, with a structural design that withstands tensile and lateral pressure. It has been tested for repetitive assembly and disassembly cycles without loss of fixation, ideal for removable plinths.

The RAL of the finish of the accessories for inside Moka wardrobes and dressing rooms is approximately 8019.

The pinless glides provide a quick solution for applications where drilling of the furniture is not desired. Thanks to their flat, self-adhesive design, they allow direct installation on the module surface, reducing assembly time and avoiding additional operations in production.

It is equipped with a high-tack acrylic technical adhesive base, capable of withstanding tensile forces in excess of 7 kg. It is effective on melamine, plywood and MDF boards with standard finish. It is recommended to be applied on clean and dry surfaces to ensure performance.

This glide is recommended for use in the bottom corners of base units, cabinet bases or on the edge of fixed legs. As it does not protrude from the furniture, it prevents accidental snagging and prolongs the durability of the adhesive even in intensive use.

Its technical polyethylene base has low friction, which allows a smooth glide on surfaces such as parquet, PVC, ceramic or vinyl. Compared to felt or rubber, it reduces sliding resistance by 30% and minimises wear.

Reuse is not recommended. The adhesive is designed for a single professional application. Once removed, it loses effectiveness and may compromise the stability of the furniture. For new installations, it should be replaced with a new unit.

The following video shows how you can easily assemble the abovementioned storage system in a kitchen.

All of the Shelvo racks for kitchen corner units are capable of supporting up to 20kg of weight.

The minimum door size for installing a half-moon Shelvo rack in a kitchen unit will depend on the diameter of rack chosen: - For racks of 650 mm diameter, the minimum door size is 400 mm. - For racks of 750mm diameter, the minimum door size is 450 mm.

The following video shows how you can easily assemble the abovementioned storage system in a kitchen.

Sut blinds can be adapted to different heights with a maximum height of 1500 mm. To do that, you simple need to cut the side rails and not fully unroll the blind. You need to bear in mind that the minimum gap for housing the blind box is 175 mm. However, the width of the Sut blind cannot be modified or cut, as this affects the pulling in mechanism of the blind.

The zinc-plated finish provides effective protection against rust and corrosion, which is essential to ensure the durability of the joining system even in wet environments.

This plunger is optimised for 14 to 18 mm thick boards and allows precise insertion into a 7 mm diameter hole, with an overall length of 12.5 mm, facilitating its use in multiple furniture assembly formats.

The plunger acts as the bolt receiving point within the System 10 system, ensuring a firm hold in furniture structures through quick and precise insertion, without the need for special tools.

The metallic steel body offers high mechanical strength and prolongs the life of the joint assembly, making it especially useful in industrial, contract or high traffic applications.

Each presentation includes 2,000 units, making it ideal for furniture manufacturers, wholesalers and assembly lines requiring efficient, large-scale assembly solutions.

The zinc-plated finish provides the bolt with excellent protection against rust and corrosion, making it a reliable choice for installations in environments with variations in humidity or intensive industrial conditions.

This bolt is installed by pressing it into a drilled hole. It has a diameter of 7 mm, a total length of 28.5 mm and an EU M6 thread, which guarantees a precise fit in System 10 systems with a board thickness of up to 18.5 mm.

It is designed for invisible joints in furniture structures such as beds, shelves and wardrobes. Its robust and discreet design ensures structural stability without compromising the aesthetics of the furniture.

This bolt is fully compatible with System 10 joining systems and requires machined holes for precise assembly. Its use with specific eccentric or tensioning elements allows assembly without the need for complex tools.

The System 10 hitch bolt is delivered in packs of 1000 units, which facilitates logistics and supply in large-scale assembly lines in the furniture industry.

This bracket is designed to accommodate glass panels with a thickness between 4 mm and 8 mm, making it a versatile solution for different types of tempered glass shelving.

Requires a Ø4 mm diameter drill hole to insert the attachment to the vertical board. The support section measures 18 mm wide by 7.7 mm high, ensuring a precise and stable hold.

It is made of steel and plastic with a nickel-plated finish and a zamak base. This combination guarantees high corrosion resistance, excellent mechanical behaviour and modern aesthetics.

The bracket incorporates a 13 mm long semi-circular metal piece, which presses against the glass from the inside of the bracket, firmly securing the panel without the need for additional tools.

Its minimalist and decorative design allows for aesthetic integration without visual interference in high-end furniture projects, offering a technical solution without sacrificing contemporary design.

This screw is available with Allen 3, Allen 6 and PZ2 heads. The Allen 3 head is recommended for more precise assemblies with lower torque, while Allen 6 and PZ2 are more versatile for general and automatic applications in production lines.

This screw allows installation in 12 mm boards and in an adjustable range of 14-16-18-22-26 mm, guaranteeing a secure grip on a wide variety of board thicknesses within modular or bespoke projects.

The screw is manufactured from steel with a zinc plated or black zinc plated finish, providing excellent protection against rust and corrosion, ideal for use in kitchens, bathrooms and industrial environments with high humidity.

It is designed to work in conjunction with System 10 coupling systems, being compatible with pins, double hinged pins and ring plungers from the same system, facilitating a robust and uniform integration.

What is the packaging format and how is it adapted to large productions?

This nut is designed for use with M8 threaded bolts, which have a diameter of 8 mm. The maximum depth of the nut body is 18 mm, which ensures a firm and secure fixing inside the board.

For proper installation, a bore with a diameter of 20 mm is required, corresponding to the diameter of the nut's cap flange, which allows for proper fit and stability in the material.

The 20 mm diameter hat brim design provides a larger bearing surface, making assembly easier and offering a better grip. This improves the stability of the assembly and reduces the risk of movement or misalignment.

In addition to the insertion diameter, it is important to consider the body width (10.77 mm) and the body length (18 mm). These values determine the minimum housing depth and the appropriate board thickness.

The product is packaged in 1,000 units, ideal for mass production or industrial applications. The finish is zinc-plated, which improves resistance to oxidation and adds to the durability of the component.

Each cope bar has a length of 2.35 m and a rectangular cross-section of 11 × 24 mm, which makes it compatible with conventional kitchen installations that require covering the junction between worktop and wall.

The kit includes 2 top bars and 2 sets of installation accessories containing connectors, corner pieces, corner brackets and end caps. All made of grey plastic with satin anodised finish.

Thanks to its integrated flexible seals and plastic coating, the coping effectively seals the joint between the worktop and the wall, preventing liquids from seeping in and dirt from accumulating.

The satin anodised finish provides a clean, modern aesthetic finish that matches steel or aluminium appliances and furniture.

No, the bars can be cut to size according to the kitchen design, and thanks to the included connectors, installation is quick, without the need for special machining.

The Sut roller shutter system can cover modules up to 900 mm wide and 1500 mm high. The adjustment to different heights is carried out by changing the length of the guide rails easily and precisely.

The roller shutter kit includes the aluminium roller shutter slat, the top cover with fastener and the side covers. The guides must be purchased separately, as they are adjustable in length according to the needs of the module.

It is made of extruded aluminium with a matt anodised finish, giving it a professional feel and a modern aesthetic that is ideal for kitchen or office environments.

Assembly is straightforward: the roller shutter roller is fixed to the module and then the guides with their respective covers are inserted. No additional machining is required, which facilitates clean and efficient installation.

Yes, the roller shutter allows the winding and unwinding force to be adjusted via the roller system, which facilitates its use in high-frequency installations.

The Shelvo system can be installed in corner kitchen units with a total height between 650 mm and 770 mm. It is specifically designed for 800 mm modules and allows precise adjustment thanks to its adjustable central bar.

Each tray has a diameter of 710 mm and a maximum load capacity of 20 kg. This allows small kitchen items to be stored safely, without compromising the stability of the system.

The matt anodised aluminium bar allows the trays to be fixed at two different heights according to the user's needs. In addition, it is possible to install only the lower tray or add the upper tray with positioner for a more customised configuration.

The kit includes 2 trays, 1 aluminium bar and connecting pieces. It does not require additional parts for assembly and allows easy installation without the need for special tools, making it an efficient solution for optimising space in kitchen units.

The system is designed for 800 mm and 900 mm wide modules, with a minimum internal height of 550 mm. The recommended minimum depth is 390 mm and allows installation with R325 or R375 axle, depending on the model.

Yes, the system allows partial or total extraction of the lower tray when the door is opened, improving access to the bottom of the unit and optimising ergonomics in corner units.

The system allows the trays to be installed at different heights thanks to its central bar with movable connecting pieces. This flexibility makes it possible to adapt to the content or interior design of the module, without the need for special tools.

The trays are made of recyclable polyethylene, antistatic and resistant to impact and UV rays. This composition guarantees optimum performance in demanding environments such as professional kitchens.

Each tray supports up to 20 kg distributed load. No additional reinforcement is required as long as the installation instructions included in the kit are followed.

The Revalock lock is designed to work on doors or drawer fronts with thicknesses between 13 mm and 40 mm, guaranteeing a solid anchorage and correct activation of the magnetic system from the outside.

This lock requires a calibrated magnetic key that exerts the necessary force to unlock the latch. The use of generic magnets is not recommended as they may not provide adequate attraction and may compromise the functionality of the system.

Yes, the key included in the kit can operate all Revalock system locks, making it easy to implement on multiple pieces of furniture without the need for duplicate keys.

Fixing is by means of screws included in the blister pack. Assembly is simple and does not require complex machining, although for precise alignment it is recommended to use the adhesive installation template provided in the kit.

Yes, the blister pack contains 2 locks, 1 magnetic key, mounting screws and adhesive marking template, allowing immediate installation without the need for additional components.

This frame can support up to 30 kg of weight, ensuring a smooth and crevice-free glide.

The frame is available in 11 height options, ranging from 564 mm to 1114 mm. The minimum cabinet depth must be 480 mm.

It uses full-extension slides with soft closing, which ensures quiet sliding and avoids sudden shocks when closing.

It is made of plastic and aluminium, which provides strength, lightness and an elegant mocha-coloured finish that matches different styles of furniture.

It is delivered completely disassembled, but with all components and screws included, ready for quick and easy installation.

The following video shows how this system works:

The Mago manual machine allows you to assemble drawers quickly and efficiently, making it easy to bend the flanges of the ribs and fix them to the side of the drawer.

It uses compressed air to actuate a trigger that automatically bends the tabs of the rib, ensuring it is secured to the side flap of the drawer without the need for additional tools.

Unlike other manual methods, this machine speeds up assembly, improves accuracy and reduces physical effort, which optimises production in carpentry workshops.

It is ideal for carpentry and furniture workshops, where large volumes of drawers need to be assembled quickly and accurately.

It has no limitations on the depth or width of the drawer, as its design allows it to adapt to any size without affecting the quality of the assembly.

What type of controller is needed to adjust the colour temperature?

Can the strip be cut to size and how is this done?

What power and luminous flux does it offer?

What is the adjustable colour temperature range?

What type of adhesive is included for installation?

Does the Lynx LED strip with colour temperature change require a controller to be able to use it?

How is the LED strip properly installed on different types of surfaces?

What advantages does SOB technology offer over conventional LED strips?

How does it perform in terms of energy efficiency and luminous flux?

What protection does it offer against environmental conditions?

Can the MiniSOB strip be cut?

What kind of cutting and customisation does the SOB Freecut LED strip allow?

What is the connection compatibility and what advantages does the Lynx-Z Miniled system offer?

What makes this strip different from others in terms of light uniformity?

What performance does it offer in terms of light and energy?

What are its installation and environmental resistance characteristics?

Can the SOB Free-cut strip be cut?