The X91R elbow hinge features soft closing with damping and a three-dimensional adjustment range of ±3 mm in depth, making it ideal for door thicknesses from 16 to 22 mm.

The three-dimensional depth adjustment allows correction of misalignments up to ±3 mm, facilitating exact adjustment for professional installation and guaranteeing optimum opening and closing.

It offers a cushioned closing system, reducing impacts when closing, minimising noise and increasing the durability of the furniture, ideal for high use applications in kitchens and bathrooms.

It is compatible with the X91 and X92 inserts, which facilitate stable mounting and allow the alignment and aesthetics of the furniture to be maintained.

The Ø35 mm cup has standard dimensions that guarantee a secure and resistant fit, optimising the fixing to the furniture with greater stability and durability.

The depth adjustment range is ±3 mm, while the supplement offers a vertical adjustment of ±2 mm, ensuring perfect door alignment.

No, the clip system is designed for quick and easy installation without the need for special tools.

The damping piston provides a gradual resistance that reduces the impact of closing, ensuring a quiet and smooth movement even on heavy doors.

The eccentric adjustment allows precision adjustments to correct minor misalignments in doors, optimising their functionality and final appearance.

Yes, the 105° opening angle is ideal for furniture with limited space, as it allows full access without interfering with walls or internal elements.

This attachment set is designed for standard thickness front panels compatible with the Concept system.

Yes, the hooks allow precise adjustment of the front panel, ensuring perfect alignment in the drawer.

High-strength plastic construction and robust design ensure optimum performance in high-performance applications.

No, installation is simple and only requires basic tools such as a screwdriver.

Yes, these couplings are fully compatible with other components of the Concept system, ensuring efficient integration.

The thickness of the table or desk can range from 10 mm to 88 mm.

No, for situations where you want to reinforce the attachment of the profile, you can place two clips at each end with a lower spacing. The remaining clips can be installed at an equivalent distance even if it is slightly greater than 500mm. Example of reinforced mounting:

The synchroniser is designed for Vertex slides with Push Syncro 2 and allows synchronised opening and closing by pressing the drawer front at any point.

The bar has a maximum length of 1,200 mm and is suitable for module widths of more than 600 mm, optimising its function in wider furniture.

The bar is made of natural aluminium, which guarantees lightness, durability and corrosion resistance, making it ideal for extended opening systems.

It is recommended to use the synchroniser in drawers wider than 600 mm to guarantee a uniform and simultaneous opening of the slides.

Yes, the synchroniser includes the possibility to cut the bar to fit different module widths, offering flexibility in installation.

The kit includes synchronised full-extension slides, with cushioned closure and a load-bearing capacity of up to 40 kg.

The recommended board thickness for the bottom and back of the drawer is 18 mm.

The drawer front can be precisely adjusted by means of an eccentric of ±2 mm vertically and ±1 mm horizontally.

Yes, the metal components are made of steel with an anthracite grey painted finish, which enhances strength and aesthetics.

No, the kit includes all the necessary elements: guides, side ribs, front hooks and screws, so there is no need to purchase additional elements.

The kit includes synchronised full-extension slides with cushioned closing, which guarantee a smooth and silent sliding of the drawer, improving its functionality and comfort.

The drawer supports a maximum load capacity of 40 kg, thanks to the included heavy-duty slides.

The front of the drawer can be adjusted by means of an eccentric, allowing an adjustment of ±2 mm vertically and ±1 mm horizontally.

The side ribs are made of steel with a stylish anthracite grey painted finish, providing strength, durability and a modern aesthetic.

For the bottom and back of the drawer, we recommend using 18 mm thick boards for a perfect fit and safe assembly.

This drawer is compatible with modules that allow a depth of 450 mm and are suitable for 18 mm thick back and front panels.

The kit includes slides, side ribs, a set of front hooks for mounting the drawer and screws required for installation.

This product complies with quality standards such as CATAS and FCBA certifications, guaranteeing its durability and resistance for intensive daily use.

The synchronised full-extension system provides smooth and silent sliding, optimising access to the interior of the drawer by allowing the full capacity to be utilised.

The trim covers enhance the aesthetic design of the drawer by covering the fixings, offering a clean, modern finish that blends in perfectly with the furniture.

This plate is compatible with the drawers of the Vertex, Concept and Convex ranges.

Installation is simple, as the plate is fitted to the side of the drawer by means of a clip located in the lower area, ensuring a firm and quick fixing.

Yes, the front of the plate can be screen-printed with a customised logo or design according to the customer's needs.

The plate is made of polypropylene with a finish available in various colours, such as white, grey and anthracite grey.

Yes, the plate can be installed on the left or right side of the drawer, as required.

The following video shows how you can easily install the aforementioned LED lighting.

The following video shows how you can easily install the aforementioned LED lighting.

Yes, they are compatible with all the aluminium and diffuser profiles for LED strips.

You can calculate the maximum power if you know the supply voltage of the LED strips (12V DC) and the power that you want to install using the following formula: Amps (A) = Power (W) / Voltage (V)Example: A= 48W / 12Va A= 4AThe maximum power that I can connect is 48W at 12V DC.

No, it is only compatible for 8 mm wide LED strips

The sensor dims with a short press to switch the luminaires on/off and a long press to adjust the light level.

Installation requires a Ø12 mm drill hole in the furniture. Includes a 1.5 m cable and a 6-input MiniLED distributor.

It supports 12V DC and 24V DC voltages, with maximum power ratings of 36W for 12V and 72W for 24V.

Yes, the sensor has a memory function that saves the last set intensity after switching it off.

It is ideal for panels, headboards and furniture in general, integrating perfectly in different rooms of the home.

The sensor has a detection range of 10 cm and is activated when the furniture doors are opened or closed. It is ideal for furniture with double doors, as it is installed in the centre and controls the lighting regardless of which of the doors is opened or closed.

It is compatible with 12V DC or 24V DC converters, supporting power ratings of 36W at 12V DC and 72W at 24V DC. It integrates with LED luminaires from Miniled systems.

No machining required. Can be mounted directly onto the surface of the furniture using the included double-sided adhesive accessory or screwed for a more permanent fixing.

It can be connected to a converter to manage up to 6 secondary luminaires with Miniled connection from a single sensor.

This sensor is ideal for wardrobes, dressing rooms and other furniture that require automatic switching on and off when opening or closing their doors, offering convenience and energy efficiency.

Yes, as the Volans light functions at 230V AC therefore it does not need any extra converter.

The Vall 19 handle is designed to be installed on 19 mm thick doors. It is essential that the surface is flat and compatible with the aluminium profile to ensure a stable fixing. It is recommended to check that the edges of the door are level and free of irregularities to avoid deviations during assembly.

The Vall 19 handle is available in lengths of 2.25 m and 2.7 m, with a front area of 35 mm wide and 35 mm total depth. It is made of aluminium with a matt anodised finish, which guarantees durability, corrosion resistance and a modern aesthetic that adapts to multiple styles of furniture.

For installation, a drill with aluminium-specific drill bits, a saw for cutting profiles (in case of length adjustment), a square for measuring precise angles and screws suitable for the enclosure material are required. It is crucial to use tools that do not damage the anodised finish.

The handle is manufactured under strict quality standards in anodised aluminium, complying with European standards of corrosion resistance and safety for furniture. In addition, its ergonomic design ensures comfortable use without sharp edges that could pose a risk.

Maintenance is minimal thanks to the matt anodised finish, which offers resistance to wear and tear. It is recommended to clean with a damp cloth and neutral detergents, avoiding abrasive products that may damage the anodising. To maintain its appearance, avoid contact with corrosive chemicals.

The Revalock child safety lock for doors and drawers is ideal for preserving child safety, as it prevents children from being able to open furniture. Among other things, it is very useful for installing in caravans or boats, ensuring they are locked.Its installation and functioning is very simple, a magnet (key) deactivates the lock and makes it open. It is also possible to block it, so it stops working and it is not necessary to have a key to open it. This is very useful when it is no longer necessary.

The Wave 16 handle is specifically designed for 16 mm thick boards. It is essential that the board is straight, without irregularities, and compatible with the profiles used in Placard 74 systems.

This handle is available in 2.35 m and 2.7 m lengths, in white painted, black painted and matt anodised finishes. These options offer flexibility to suit different furniture styles and designs.

The handle design includes an ergonomic grip function that makes it easy to open and close the doors. In addition, the robust construction enhances the durability of the system, especially in frequently used applications.

In Placard 74 systems, the Wave 16 handle does not require additional reinforcement if installed correctly on 16 mm boards. However, it must be ensured that the top and bottom profiles and carriages are correctly fixed to guarantee the stability of the system.

The RAL of the white gloss finish on the rails and handles of the Placard sliding door system is approximately 9003. The RAL of the anthracite grey finish is approximately 7043. The RAL of the black finish is approximately 9011.

The following video shows how you can easily install the the contemporary child safety lock, Revalock.

The following video shows how the sliding wardrobe door system is assembled.

The profile is suitable for glass doors up to 2.35 metres long and 16 mm thick.

No, this profile is specifically designed for doors with a thickness of 16 mm, guaranteeing a perfect and secure fit.

The T24 profile is designed to provide top and bottom support for sliding glass doors, ensuring stability and smooth operation in the Placard 74 system.

The package includes a 2.35 m long matt anodised aluminium profile, ready for installation.

The following video shows how you can easily install the aforementioned LED lighting.

Yes, the Revalock safety locks have a template for the installation of each lock and an assembly instructions sheet for each packaging box.

The bottom rail is designed to guide the doors supported at the bottom of the cabinet, while the top rail supports the doors at the top. Both use the same mounting system with plastic clips.

No, this model is designed for surface mounting only. If flush mounting is required, other Flow system specific options should be considered.

The rail is fixed by means of plastic clips that are screwed to the surface of the furniture, eliminating the need for pre-machining and facilitating installation.

Yes, the track is compatible with doors up to 20 mm thick, providing versatility for different cabinet designs.

Yes, it is designed to support doors with a maximum weight of 50 kg, guaranteeing stability and safe sliding.

Kit includes: 2 side metal ribs and mounting hardware. It is designed for easy integration with Simplex drawer systems.

The ribs are made of high-strength steel, available in white painted and anthracite grey finishes. Both finishes guarantee durability, corrosion resistance and aesthetic design.

The system is designed for drawers with a height of 86 mm and multiple depths: 290 mm, 340 mm, 400 mm and 440 mm. Compatible with full-extension slides and Simplex soft close systems.

Yes, installation is quick and easy. No special tools are required. Just assemble the ribs with the slides and fix them to the front of the drawer with the included screws.

The system supports up to 35 kg per drawer, ideal for residential and commercial applications.

The Optima cutlery tray finishes are of high quality, with a design that ensures strength and durability, adapting to various kitchen styles.

Yes, the Optima cutlery tray is compatible with both Vantage-Q and Slim drawer systems, provided the module and size are compatible.

Optima cutlery trays are made of high-quality, resistant plastic, guaranteeing durability and ease of cleaning.

No, Optima cutlery trays are not designed to be cut, but are available in various sizes to fit different drawer sizes.

The modular design of the Optima cutlery tray allows you to reorganise kitchen utensils efficiently, maximising the space available inside the drawer.

The D.L. of the Optima cutlery tray finishes is of high quality, ensuring strength and durability for long-lasting use.

The Optima Vantage cutlery tray is available in sizes compatible with drawers 400 mm wide and 450 mm deep.

Yes, the Optima Vantage cutlery tray is made of durable plastic that has been treated to protect it from contact with moisture.

The design of the Optima Vantage cutlery tray allows for efficient organisation of kitchen utensils and tools, maximising the space available in the drawer.

To clean the Optima Vantage cutlery tray, simply use a damp cloth and mild detergent. It is recommended to dry it thoroughly after cleaning.

The Optima Vantage cutlery tray is compatible with standard width module drawers of 600 mm and 900 mm, with a depth of 500 mm and 16 mm thick board.

Yes, the Optima Vantage cutlery tray can be easily trimmed to fit the specific dimensions of the drawer, providing a customised installation.

It is made of high-quality, hard-wearing grey plastic, designed for durability and ease of cleaning.

Yes, the material used in the cutlery tray is resistant to moisture and daily wear and tear, ensuring longevity in kitchen environments.

The cutlery tray design includes a precise fit to keep it stable inside the drawer, preventing movement during use.

The Optima Universal cutlery tray is compatible with drawer modules between 400 mm and 900 mm wide, with depths between 450 mm and 500 mm and board thicknesses between 16 mm and 19 mm.

Yes, the Optima Universal cutlery tray can be cut to fit depths between 449 mm and 482 mm and widths between 360 mm and 336 mm, allowing a customised installation according to the dimensions of the drawer.

The cutlery tray is made of high-quality grey plastic, which guarantees durability, strength and easy cleaning in daily use.

The cutlery tray has compartments designed to store knives, spoons, forks and other kitchen utensils, maximising the space inside the drawer.

The design of the Optima Universal cutlery tray allows for a precise fit inside the drawer, ensuring it stays in place even during frequent use.

The Optima Vantage cutlery tray is compatible with drawers of standard module widths of 600 mm and 900 mm, with a depth of 500 mm and a board thickness of 16 mm.

Yes, the Optima Vantage cutlery tray can be easily trimmed to fit the specific dimensions of the drawer, providing a customised installation.

It is made of high-quality, hard-wearing grey plastic, designed for durability and ease of cleaning.

Yes, the material used in the cutlery tray is resistant to moisture and daily wear and tear, ensuring longevity in kitchen environments.

The cutlery tray design includes a precise fit to keep it stable inside the drawer, preventing movement during use.

For the assembly of Adige handle profiles for 18 mm board along with the Space + sliding doors, it is necessary to choose an outside runner with a thickness of 23 mm.

Yes, it is possible to cut the 80 feet. To do so, you need to cut the foot at the leveller part, once this part has been disassembled, and make the cut with a cutting disk/saw that is suitable.

The RAL number of the white finish on the rails and handles of the Placard sliding door system is approximately 9003. The RAL code of the anthracite grey finish is approximately 7043. The RAL code of the black finish is approximately 9011.

The following diagram shows the detail of the machining that you need to carry out on the table top of a table in order to fasten the plate of the 60 - 80 feet.

The following video shows how the sliding door system for wardrobes is assembled.

The maximum recommended tabletop that the board or table top with Hera feet should have is 900 x 900 mm.

The maximum recommended tabletop that the board or table top with Duplo feet should have is 1.500 x 900 mm.

The use of clips reduces installation time by up to 40% compared to screw assembly. This translates into greater efficiency in production lines or on-site assembly, eliminating the need for power tools and reducing the margin of error in placement.

Clips require housings with tolerances of ±0.1 mm to ensure a firm and durable press fit. This is especially relevant in CNC manufactured modules or demountable furniture systems where repeatability and accuracy are critical.

Thanks to their high-strength polyamide construction, the clips absorb vibrations and keep their shape without loosening with frequent use. They are ideal for cabinets with sliding doors in high traffic areas or commercial use, as they combine mechanical strength with structural flexibility.

This system can also be applied to existing cabinets, provided that the profile housing is accessible. It is a very useful solution for refurbishments or technical upgrades where you want to improve the performance of the cabinet without completely replacing the structure.

The upper clip is optimised to withstand vertical traction and keep the profile aligned in ceilings or enclosure lids. The bottom clip, on the other hand, is designed to withstand axial pressure from the base, allowing for clean installation in plinths. Its visual coding also facilitates error-free assembly.

The Twofold system is ideal for small spaces or where full access to the interior of the unit is required without taking up front surface area, such as in laundry cupboards, pantries, hidden shelving or compact office furniture.

The integration of the hinges into the carriage itself allows perfect alignment between the leaves, reduces the amount of hardware required and improves the stability of the assembly, facilitating faster and more precise installation.

It is advisable to provide a minimum depth of 325 mm, to use boards of high dimensional stability and to respect the necessary margin between the door and the side of the module to allow correct folding and sliding without friction.

Yes, the system allows the leaves to be disassembled by releasing the trolley, which is very useful in projects requiring maintenance, transport or replacement of components. The modular design facilitates intervention without disassembling the entire module.

Periodically check the tightness of the hinges, apply dry lubricant to the bearings if noise is detected and make sure that there are no particles on the sliding guide. Avoid using abrasive products on the nickel-plated finish of the carriage.

The undercarriage acts as a support and stabilisation point for folding door leaves. Its design with 4 cascading wheels distributes the weight better, prevents door wobbling and provides a more controlled opening and closing movement.

It is especially recommended for higher doors, less rigid structures or where a firmer and more controlled opening is required. It is also essential when the system is mounted without an external bottom guide, as it provides internal support without the need for a visible channel.

The trolley can be installed with concealed recessing in the base of the module, allowing it to maintain a clean aesthetic without visible elements. This feature makes it an excellent choice for modern, integrated or minimalist furniture.

The system is designed to operate on flat, rigid surfaces. It is recommended to avoid uneven floors or low density bases that may cause play or vibration. A well levelled base significantly improves the sliding accuracy.

It is recommended to clean the raceway regularly and check the condition of the wheels. No lubricant is necessary if kept free of debris. For heavy duty installations, it is advisable to check the tightness of the anchorage every 12 months.

The Twofold central hinge is made of high-strength technical plastic, which allows for quicker assembly without complex machining. It also reduces the overall weight of the assembly, improves the aesthetics of the enclosure interior and maintains excellent durability in heavy-duty applications.

Yes, the screw fixing design allows micro-adjustments to be made to the alignment after the doors have been fitted. This makes it easy to correct any deviations, even after initial assembly, without dismantling the entire system.

The hinge should be mounted with the long side towards the upper leaf to facilitate the natural rotation of the assembly when opening and folding. Incorrect positioning can lead to blockages or unnecessary stress on the hinge. It is important to follow the recommended orientation for smooth folding.

On tall or heavy doors, the centre hinge can be supplemented with magnetic stops or concealed dampers to assist closing. It is also possible to add a second intermediate fixing point or use the optional metal hinge when a more rigid connection is required.

No lubrication is required. Periodic cleaning with a dry cloth is sufficient to prevent dust accumulation in the joint area. It is recommended to check the tightness of screws at least once a year in frequently used installations.

This track is specifically designed to be fixed to the ceiling of the enclosure from below, acting as a top guide without the need for complex machining. Its design allows clean integration into tall modules, offering greater stability in folding doors without encroaching on usable space.

It is recommended to use Ø3.5x15 mm countersunk screws, evenly distributed along the rail. It is important to fix the profile on a solid board surface or internal reinforcements, avoiding areas with pre-drilled holes that could weaken the anchorage.

Yes, thanks to its straight profile and ceiling mounting, it allows the integration of LED strips on the sides of the enclosure without interference. It can also be combined with automatic opening sensors to activate the lighting when the folding doors are unfolded.

The matt anodising provides greater resistance to corrosion and friction wear, maintaining a professional aesthetic even with intensive use. It is ideal for furniture in demanding environments such as kitchens, offices or contract projects where durability is key.

Yes, the profile can be cut with suitable tools such as a mitre saw with an aluminium disc. After cutting, it is recommended to remove burrs to protect the wheels of the Twofold system and to maintain a smooth, blockage-free glide.

The maximum diameter that a table top or surface of a table can have with a Stay 5 or Stay 6 leg in order to avoid it toppling over when we support ourselves on one end is:- 1,000 mm for the Stay 5 legs. - 1,200 mm for the Stay 6 legs.

According to the ISO standard: 7170:2005 Emuca supports can take a maximum weight of 40 kg per metre evenly distributed.

The following video shows how you can easily assemble the Moka accessories.

The RAL of the finish of the accessories for inside Moka wardrobes and dressing rooms is approximately 8019.

The foot is height-adjustable from 98 to 115 mm, ideal for compensating for uneven floors in kitchen base units or units with plinths.

The kit consists of 4 adjustable feet, 2 clamps for connection to the plinth and 4 fixing screws. Screws for mounting to the furniture are not included.

The feet are made of one-piece black plastic, while the base connectors can be made of aluminium or wood, depending on the version.

This system has been tested in accordance with UNE-EN 16230:2013/AC:2015 and UNE-EN 14749:2017, guaranteeing a high load capacity and structural reliability.

The image shows packaging options in KIT of 10 or 50 units, as well as batch presentations. All available finishes are in black colour.

The double bolt allows for solid joints between pieces of furniture, especially in configurations that require simultaneous vertical and horizontal fastening, optimising the assembly and structural strength of the module.

Its design allows for a more even load distribution, improves joint stability and reduces the number of parts required when joining two components with a single element.

The bolt has an overall length of 62 mm and a diameter of 6 mm. Each end incorporates holes for 6 mm bolts and an end housing for 10 mm head bolts.

It is made of steel with a zinc-plated finish, which provides high resistance to oxidation, ideal for humid environments or industrial applications with high mechanical demands.

The product is delivered in packs of 1000 units, facilitating its management and replacement for manufacturers, industrial carpenters and furniture distributors.

The bolt has a total length of 40 mm, of which 9 mm is inserted into the body of the furniture, providing a secure and stable fixing in standard board thicknesses, facilitating efficient serial installation.

This bolt features a metric thread that guarantees a firm hold when spliced with compatible eccentrics, such as the Luna eccentric, ensuring precision centring and resistance to tensile stresses.

It is recommended to drill a guide hole with a diameter of 6 mm and a minimum depth of 9 mm to properly accommodate the bolt without deforming the board, thus optimising the fit and reducing possible play.

The zinc-plated finish protects the bolt against corrosion and rust, especially useful in applications exposed to moisture or demanding mounting environments, ensuring a long service life of the fastening system.

The bolt is specifically designed for the Luna hooking system, providing an efficient and concealed locking mechanism that allows clean and removable joints in shelving and kitchen or bathroom units.

The RAL code of the white finish of the Optima cutlery holder is approximately 9003. The RAL code of the grey finish of the Optima cutlery holder is approximately 7001. The RAL code of the anthracite grey finish of the Optima cutlery holder is approximately 7043.

The Optima cutlery holder has a wide range of models and sizes. The cutlery holder intended for the Vantage-Q drawer is not compatible with the Slim drawer. as a a cutlery holder model exists for the Slim drawer.Both models have the same depth but not the same width, specifically, the cutlery holders for the Slim drawer are 6 mm narrower than the cutlery holders for the Vantage-Q drawer.

The Luna press stud features an 8.3 mm long installation head, which is specifically designed to fit precisely into the cup system of the same model. Its stamped steel construction guarantees high resistance to frequent mechanical stress.

This bolt employs a pressure system that allows quick installation without complex tools, ideal for heavy-duty industrial processes. The thread design, with a depth of 10.3 mm, ensures a firm and durable anchorage in the board.

The zinc plated finish acts as an effective barrier against rust, improving the performance of the bolt in humid environments or demanding conditions. This results in increased durability of the installed assembly, especially in kitchen or bathroom cabinets.

This bolt is optimised for cup assembly in cabinets and is compatible with Luna systems. Its simple installation makes it an efficient choice for automated or semi-automated assembly lines in the professional furniture sector.

The Luna press stud for coupling is supplied in packs of 2,500 units, facilitating its integration in industrial processes with a high assembly turnover. This bulk presentation allows optimising supply and reducing replenishment times.

The maximum dimensions per door are 2400 high and 500 wide (per door leaf).

The Twofold system offers the versatility of sliding well when assembled with and without a lower guide. Whether it is used depends on the type of wardrobe in which the system is mounted.

The following video shows how the sliding door system for wardrobes is assembled.

They are ideal for flat surfaces such as wooden floors, ceramic, vinyl or even tempered glass, thanks to the adhesive on the bottom base.

The hemispherical shape offers discreet and effective protection, distributing the impact better and preventing damage to both the door and the contact surface.

Each top has a small diameter of 42 mm, making them compact and perfect for spaces where a visually discreet top is desired.

Yes, they can be easily removed if the adhesive is pre-heated. This minimises the risk of leaving residue or damaging the floor.

They are made of plastic with a transparent finish, offering durability, impact resistance and a visually unobtrusive design.

It is installed by means of an adhesive base located at the bottom that is easily fixed to the floor without the need for tools.

The cylindrical shape allows for uniform impact distribution and unobtrusive aesthetics, making it ideal for spaces where it is desirable to minimise the visibility of the stop.

Each stop has a compact diameter of 42 mm, making them suitable for confined spaces, passageways and interior doors.

They are suitable for flat surfaces such as ceramic, wood, parquet, vinyl or PVC.

They are made of high-strength transparent plastic, combining durability with a virtually invisible design.

The Levelup 3 hanger supports up to 65 kg per unit, making it ideal for tall units in kitchens and bathrooms where high strength and safety are required.

Allows height adjustment of 18 mm and depth adjustment of 16 mm, facilitating precise adjustment of the module once installed. It is pressure-fitted into Ø 10 mm holes.

Yes, when mounted on the outside of the module and fixed to the wall, it is compulsory to use an additional plate for correct fastening.

It is made of steel with a zinc-plated finish, which makes it corrosion resistant, making it suitable for demanding environments such as kitchens and bathrooms.

Yes, its design allows for installation on either the left or right side of the module, making it versatile for multiple configurations.

The most common practice is to place the lateral hinges in alignment with the central ones. However, for closets with really heavy doors, two of the concealed hinges can be placed at the top of the closet to increase resistance and stability.

The Revalock lock is designed to work on doors or drawer fronts with thicknesses between 13 mm and 40 mm, guaranteeing a solid anchorage and correct activation of the magnetic system from the outside.

This lock requires a calibrated magnetic key that exerts the necessary force to unlock the latch. The use of generic magnets is not recommended as they may not provide adequate attraction and may compromise the functionality of the system.

Yes, the key included in the kit can operate all Revalock system locks, making it easy to implement on multiple pieces of furniture without the need for duplicate keys.

Fixing is by means of screws included in the blister pack. Assembly is simple and does not require complex machining, although for precise alignment it is recommended to use the adhesive installation template provided in the kit.

Yes, the blister pack contains 2 locks, 1 magnetic key, mounting screws and adhesive marking template, allowing immediate installation without the need for additional components.

It is designed to form a 90° angle in dressing room or wardrobe installations using Silk wardrobe rails.

It is made of plastic with a painted finish, which gives it lightness, strength and a modern aesthetic.

The mounting is made on the top of the bracket by means of an M6 screw, which is included in the kit.

It is specifically designed for Silk wardrobe rails, so compatibility with other systems is not guaranteed.

Each package contains 20 corner brackets and includes M6x40 mounting screws.

It is available in three widths: 475 mm, 675 mm and 775 mm. The height is 124 mm and the depth is 452 mm.

It is made of steel painted in moka colour, which guarantees resistance to knocks and falls, as well as combining with wooden furniture.

The drawer includes ventilation slits in its structure, allowing air circulation and preventing the accumulation of humidity in the garments.

It is delivered unassembled, with all the components and screws necessary for its installation.

Yes, it is compatible with slide systems for full or partial extraction, depending on the configuration of the enclosure.

The door or drawer must have a total thickness of 18 mm for the profile to fit correctly and securely.

No special machining is required. It is fixed by pressure or by means of adhesives or screws, depending on the design of the furniture and the professional. The shape of the profile allows easy integration into the door edge.

It has an open rectangle design, 10 mm high x 25.7 mm wide at the visible part. The complete handle is 30 mm high and 46 mm wide including the fixing flange.

Each unit is 2.8 metres long. Supplied in packs of 10 units, ready to cut and adapt for mass production projects or customised installations.

The packaging contains 10 units of Adige profiles, each 2.8 metres long, ready for direct installation in manufacturing processes or on-site assembly.

The shelf is designed for mounting with a maximum gap of 1.081 metres between two Zero profiles, and its effective length is 1.07 m.

According to UNE EN 16122:2013, the shelf can support up to 100 kg of evenly distributed load.

Kit includes: 2 shelf profiles 1.07 m, 1 Lynx-W profile 1.07 m, 2 shelf supports, 2 ribs to form the shelf, 2 system locking brackets, 2 M4x12 screws, 8 aluminium threaded screws Ø3.5x19 black and 4 plastic caps.

Yes, it includes a Lynx-W profile ready to add an LED diffuser of the same size or can be used as a decorative cover if you do not wish to install lighting.

The kit includes system locking brackets that prevent the shelf from unintentionally moving up or down once installed.

The following video shows how to assemble such a box in a simple way:

The following video shows how to assemble such a box in a simple way:

This latch is designed to be screwed directly onto the inside of the module and is compatible with lifting pistons used on aluminium or wooden doors of the PLUS 7-8-10 series.

It is optimised for aluminium doors with standard thicknesses, ensuring a firm, distortion-free fixation on thick profiles compatible with lifting piston systems.

The hitch is designed to provide structural support and stability to the piston, allowing the use in furniture with vertical opening doors with pistons designed for loads depending on the model of piston used.

The coupling has elongated holes to allow for precise installation adjustments. The use of standard diameter self-tapping screws is recommended for fixing to aluminium or wood.

Made of nickel-plated steel, it offers high resistance to corrosion and wear. Its finish meets the corrosion protection standards used in the metal furniture industry.

The following video shows how this system works:

The following video shows how you can easily assemble the Concept inner drawer.

The Vantage-Q drawer kit supports a load capacity of up to 40 kg. The slides are designed with a push system for smooth and silent opening, ensuring a smooth glide.

The drawer ribs are equipped with staples designed to be fixed to the bottom of the drawer by machine, ensuring precision and robustness in assembly. They are compatible with any module width.

The drawer allows a vertical adjustment of ±2 mm and a horizontal adjustment of ±1.5 mm in the front fixing, facilitating precise adjustments for a perfect installation.

The materials used in the kit include epoxy painted steel, finished in white (RAL 9003) and grey (RAL 9006). These materials offer high resistance to wear and an excellent aesthetic finish.

The product code includes all the elements required for the assembly of an 83 mm high external drawer: runners, ribs, rear hooking set and a front hooking set for the external drawer. For complete installation, no additional components are required.

What load capacity does the system support and how is it distributed?

What tools and machining are necessary for its installation?

Where is the hanger installed and what type of wall anchor is used?

How is the position of the module adjusted once it is hung?

What materials make up the kit and what advantages does it offer in demanding environments?

At Emuca, we make it easy for you. Here you can download this Excel file that will help you configure your drawer unit step by step. Simply enter the module measurements (height, thickness, overlap, etc.) and specify how many drawers you want. This file allows you to:

• Automatically calculate the machining dimensions of the drawer fronts (H1, H2, H3...) (mm).
• Determine the height of each drawer front (mm).
• And obtain the machining dimensions required to manufacture the drawer fronts (X, Y) (mm).

It also includes visual representations so you can check the result and avoid errors. Ideal for carpenters, designers or DIY enthusiasts who want a practical and accurate solution.

If a warning message appears when you open the Excel file, close the file. Right-click on the downloaded file and select Properties. At the bottom of the window, tick the box Unblock. Click Apply and then OK. You can now open the file.

The minimum unit depth required to install a Vantage-Q exterior drawer with push is calculated with the formula: Minimum depth = Depth + 38 mm. In this case the minimum unit depth needed will be 500 + 38 = 538 mm.

The minimum unit depth required to install a Vantage-Q interior drawer with push is calculated with the formula: Min. depth = Depth + 44 mm. In this case the minimum unit depth needed will be 500 + 44 = 544 mm.