Frequently asked questions
Yes, the hinges and accessories come with Ø4x16 mm screws with the same titanium finish.
The soft closing system is integrated by means of a damping piston that guarantees a controlled and silent closing of the doors, avoiding sudden knocks and prolonging the useful life of both the hinge and the furniture. This system is ideal for applications in kitchens, wardrobes and furniture where a comfortable and long-lasting use is a priority.
The X91 hinge is compatible with door thicknesses between 14 mm and 24 mm. The drilling range of the cup is 3 to 7 mm, while the diameter of the cup is 35 mm. These dimensions ensure a precise fit on a wide variety of standard doors in the furniture industry.
The X91 hinge can be adjusted three-dimensionally by means of adjusting screws:
Height: Adjustment via the mounting base.
Side: Adjustment via eccentric screw for precise alignment corrections.
Depth: Direct adjustment for a better fit between door and frame.
This ensures a professional installation, even in cases of small surface irregularities.
The X91 hinge is made of nickel-plated steel, ensuring corrosion resistance and excellent mechanical performance. In addition, it has been tested to withstand prolonged opening and closing cycles under intensive use, meeting the quality standards of the furniture industry.
Yes, the X91 hinge is designed to support the weight of standard doors up to 24 mm thick, thanks to its strong steel construction and adjustment system that ensures secure support. For larger or heavier doors, additional hinges are recommended for optimal load distribution.
The springless X91N hinge is compatible with magnetic closers and offers a 105° opening, making it ideal for doors that require smooth and controlled closing. It is easily attached to the supplement by means of an automatic clip, optimising installation and functionality.
To install this hinge correctly, it is necessary to work with door thicknesses between 14 mm and 24 mm. It is necessary to consider a cup drilling range of 3 to 7 mm, and the diameter of the cup should be 35 mm.
The automatic clip system allows quick and easy attachment to the clamping insert without the need for additional tools. This facilitates both initial installation and subsequent maintenance or adjustments.
The X91N hinge allows depth adjustment by means of an eccentric screw, ensuring a precise fit. This range of adjustments is ideal for correcting irregularities or ensuring a perfect fit between door and cabinet.
The hinge is made of high-quality steel with a nickel-plated finish (or titanium, depending on the model), which ensures high resistance to corrosion and wear, guaranteeing durability even in heavy-duty environments.
The X91 elbow hinge with soft close improves the functionality of the furniture by ensuring a controlled and silent movement, prolonging the life of the furniture and offering a more comfortable and secure closure.
This hinge is suitable for standard door thicknesses between 14 and 24 mm, making it versatile for most furniture in kitchens, bathrooms and offices.
Precise adjustment is achieved thanks to the three-dimensional adjustment, which allows the height, side and depth of the door to be adjusted, ensuring perfect alignment with the furniture.
The shock absorbing piston eliminates abrupt shocks during closing, providing a smoother user experience and preventing premature wear of furniture components.
The cup drilling range of 3 to 7 mm allows greater flexibility when installing the hinge, ensuring compatibility with different furniture designs and facilitating adjustments during assembly.
The following video shows how you can easily assemble the Ultrabox drawer.
The X91N elbow hinge is designed for corner units, where its adjustability and angular design allows for perfect integration, optimising space and improving functionality in kitchens and cupboards.
The automatic mounting system allows the hinge to be attached to the supplement quickly and without additional tools, reducing installation time and ensuring a stable connection.
This hinge is compatible with 35 mm diameter cups and a drilling range of 3 to 7 mm. In addition, it can be installed on doors with a thickness between 14 and 24 mm, making it versatile for most standard furniture.
The depth adjustment by means of an eccentric screw allows fine adjustments to be made, correcting possible misalignments and ensuring that the door is perfectly aligned with the furniture, even in complex installations.
The anti-corrosion nickel-plated steel finish provides excellent resistance to moisture and wear, ensuring the durability of the hinge in demanding environments such as kitchens or bathrooms. In addition, its professional aesthetics enhance the appearance of the furniture.
The X91 soft-close super elbow hinge is ideal for heavy-duty furniture thanks to its robust construction, shock absorbing piston and high-strength materials that withstand continuous use without losing functionality.
The super-cornered design allows maximum use of the interior space of the cabinet, ensuring an optimal opening of 105° and installation in complex configurations, such as corner cabinets or corner units.
The mounting is stable and durable thanks to the automatic clip-on system and the included screws. In addition, the drilling range of 3 to 7 mm ensures a firm hold in the 35 mm diameter cup.
Depth adjustment by means of an eccentric allows precise adjustments to ensure that the door is perfectly aligned with the frame, even on uneven surfaces or furniture with tight tolerances.
The soft closing system, integrated with a damping piston, prevents impacts when closing the door, protecting both the furniture components and the hinge itself, which significantly increases its durability.
The 45° arm design makes it easy to fit furniture in corners or nooks, maximising space utilisation and improving access to internal areas of the furniture.
The soft closing system protects the doors and hinges by avoiding abrupt impacts, prolonging their useful life. It also ensures quiet and comfortable movement, enhancing the user experience.
To install this hinge, it is necessary to verify that the doors have a thickness of 14 to 24 mm and to drill holes with a diameter of 35 mm and a drilling range of 3 to 7 mm. These specifications ensure a safe and functional installation.
The automatic assembly system simplifies installation by allowing the hinges to be attached to the insert quickly and accurately, reducing the time and effort required for assembly.
These hinges are ideal for furniture in demanding environments, such as kitchens and bathrooms, thanks to the corrosion and wear resistance offered by the titanium or nickel-plated finishes, as well as providing a modern aesthetic appearance.
The drilling range of 3 to 7 mm guarantees a precise fit of the cup, allowing an even load distribution and improving the stability of the hinge on doors from 14 to 24 mm thick.
Three-dimensional adjustment allows height, side and depth adjustment, correcting alignment errors and ensuring that the doors work perfectly, even in complex installations or with tight tolerances.
According to its design, the X91N hinge can withstand medium to high dynamic loads, ensuring its functionality in heavy duty furniture such as kitchens and offices, depending on the density of the door material and the quality of the installation.
The automatic assembly system minimises stresses at the fixing points, reducing the risk of deformation due to continuous use and increasing the durability of the assembly against repeated opening and closing cycles.
The nickel-plated steel finish meets technical standards that ensure resistance to corrosion and abrasion, providing reliable performance in wet or demanding environments such as kitchens or bathrooms.
The 90° angle allows optimised access to furniture located in blind corners, ensuring efficient door movement without interference with other furniture structures.
The eccentric adjustment allows precise adjustment of the depth, correcting misalignments in the installation and ensuring perfect alignment of the doors with the furniture frame.
To ensure optimum installation, holes should be drilled in the cup with a diameter of 35 mm, with a drilling range of 3 to 7 mm, ensuring compatibility with door thicknesses of 14 to 24 mm.
The automatic mounting system evenly distributes the loads on the hinge, improving its stability and reducing long-term wear and tear in projects with intensive use or frequent openings.
The nickel-plated or titanium finish provides superior corrosion and wear resistance, making the hinge ideal for kitchens and other environments where durability and professional aesthetics are required.
Yes, the drawer measures are the same in the Silver and Slippe with partial and/or total extension with clips.
No, the drawer measures are different between.
No, the drawer length is 10 mm longer in the case of the Silver rail. Also, the position of the adjustment and locking pivot is different.
The difference between the hidden Slippe rails with a hook as opposed to those that do not have a hook, is the possibility of disassembling the drawer with a simple click.
The following video shows how you can easily assemble a drawer with soft- closing and T30 drop runners.
This template set is compatible with Vertex, Concept and Convex drawers.
Templates allow precise marking of the position of the drawer front attachments, eliminating the need for manual measurements.
The kit includes only the marking templates, specifically designed to facilitate the installation process.
The inserts are made of durable plastic, ensuring durability and precision during use.
No pre-measurement is necessary, as the templates are designed for direct and precise marking without additional calculations.
The kit includes 2 aluminium profiles, 4 plastic side adapters, 4 plastic dividers and assembly instructions.
The profiles are made of aluminium, and the side adapters are made of plastic with a painted finish, which guarantees strength, lightness and a functional design.
The kit is initially designed for depths of 350 mm, but is not compatible with depths shallower than this.
It is compatible with square rails from the Vertex and Concept range, 178 mm Vertex drawer sides, 185 mm Concept sides and straight ribs of other heights such as 13 mm.
The widths are adjusted using the included aluminium profiles, which allow the length to be modified according to the requirements of the drawer.
The Silver concealed slide set supports a maximum load of 30 kg, ideal for home furniture.
These slides include a locking pivot mounted on the slide itself to secure the position of the drawer and prevent unintentional disassembly.
They offer a vertical adjustment of ±4.5 mm, which facilitates the precise adjustment of the drawer.
They are made of steel, which guarantees durability, strength and a smooth and quiet operation thanks to the high quality delrin bearings.
This model is available in depth lengths of 240 mm, 290 mm, 340 mm, 390 mm, 440 mm, 490 mm, 540 mm and 590 mm to suit various furniture design needs.
The diameter of hole that is used for the euro screws is 5 mm, as prior drilling is required to assemble those screws.
Yes, this bracket makes it possible to block the shelf in order to turn the furniture with the shelf assembled, without falling, which facilitates transport. Likewise, the shelf can be assembled and disassembled easily without the need for tools, thanks to a manual closing plate that frees the steel pivot.
The Sekure bracket can be assembled and disassembled easily without the need for tools, thanks to a manual closing plate that frees the steel pivot.This pivot is put into the bracket, with the short 7.5 mm part remaining within the bracket and the longer 10 mm part is put into the side of the furniture.The plate of the bracket slides, makes it possible to lock the pivot in order to turn the furniture with the shelf assembled, without falling, which facilitates transport.
The DOUBLE Point switch LED Sensor operates on an input range of 100-240V AC at 50-60 Hz, so no additional power converter is required. It can withstand a maximum load of 250W, ideal for LED lamps.
The sensor is designed for recessed installation, with a visible diameter of 10.5 mm. It is suitable for wood, plastic or metal surfaces with a maximum thickness of 5 mm. It is recommended to use a specific drill bit to ensure a perfect fit.
The sensor has a motion detection capability of up to 5 cm. This makes it ideal for applications where non-contact activation is required, such as in cabinets or drawers.
The sensor body is made of high-strength plastic with a metallic grey finish that simulates aluminium. This provides durability, impact resistance and a discreet, modern aesthetic design.
The sensor is UKCA and CE certified, ensuring compliance with EU and UK electrical and material safety regulations.
The Lynx Q connector supports a maximum power of 36W for 12V DC LED strips and 72W for 24V DC LED strips. It is compatible with 8mm wide LED strips, ideal for decorative or functional applications.
Installation of the connector is simple: insert the LED strip into the ends of the connector, making sure to respect the positive/negative orientation. When the strip is inserted correctly, a "click" sound is generated to confirm the connection.
The Lynx Q connector has dimensions of 10.5 mm wide, 20.8 mm long and a compact design, making it suitable for projects requiring discreet and precise connections on 8 mm LED strips.
It is made of durable plastic, providing safety and durability of the connection. Its design ensures a firm and reliable installation, even in environments where LED strips are frequently handled.
This connector is suitable for both 12V and 24V LED lighting systems, making it versatile for residential, commercial and decorative applications requiring continuity in the LED strip circuit.
The Point Door Double LED sensor works by proximity detection. It turns the LED light on and off when interference is detected in its range, such as when a cabinet door is opened or closed.
It has a sensing range of 3 cm, making it ideal for applications in cabinets, drawers or other furniture where automatic switching is necessary when interacting with the space.
The sensor design includes two compact and unobtrusive detectors, connected by 1.5 m long cables. This allows for easy and flexible installation in different furniture configurations.
The sensor includes a power cable with TYPE B plug that connects directly to the converter. It is made of plastic with a painted aluminium finish, combining durability and aesthetics.
It is compatible with LED luminaires up to 250 W and can be used in systems with separate modules, such as compartment cabinets or structures with segmented lighting.
The Point Switch Simple LED Sensor uses proximity sensing to automatically turn an LED light on and off. This occurs when interference is detected within its detection range.
The sensor has a detection range of 3 cm, making it suitable for applications such as cabinets, drawers or any space that requires automatic illumination when interacting with proximity.
The compact design of the sensor, with a small sensor head and 1.5 m cables, allows for unobtrusive installation on furniture or other surfaces, optimising the available space.
The sensor includes a power cable with TYPE B plug for direct connection to the converter. Its body is made of plastic with an aluminium painted finish, providing durability and aesthetics.
The sensor operates on 100-240V AC input at 50-60 Hz and can control LED luminaires up to 250W. This makes it compatible with a wide range of lighting systems.
The Mizar LED spotlight offers a power of 2.5 W or 5.2 W depending on the model, with a natural white colour temperature of 4,000 K and a luminous flux of 200 lm. It has A+ energy efficiency, ideal for low consumption lighting.
This spotlight does not require an additional converter, as it operates directly from a 230V AC connection. This simplifies installation and reduces the costs associated with additional components.
It is available in two sizes: 66 mm and 84 mm in diameter. Its installation is recessed and requires a pre-drilling of 55 mm in diameter, facilitating its integration into furniture and wardrobes.
The finishes available are satin nickel, matt black and painted aluminium. These finishes allow it to adapt to different decorative styles, from modern to classic.
The spotlight is made of steel and plastic, which combines durability with lightness. Its design incorporates a diffuser that homogenises the light, providing uniform and pleasant illumination in any space.
The SIMPLE LED Point Door Sensor uses a proximity sensing system that turns the LED luminaire on or off when it detects interference within a range of 3 cm, such as when a cabinet door is opened or closed. This system is designed to provide accurate and automatic activation.
The sensor is designed to operate on 240V AC input at 50-60 Hz, supporting a maximum power of 250W. It is compatible with LED luminaires and ensures safe and efficient performance in domestic or commercial electrical systems.
The cable with TYPE 8 plug allows the sensor to be connected directly to the converter without the need for additional adapters. This connection facilitates quick and safe integration into the lighting system.
No, the sensor has a fixed detection range of 3 cm which cannot be adjusted. However, its compact design and predefined range make it ideal for specific applications, such as cabinets and furniture.
The sensor is made of plastic with an aluminium painted finish, giving it resistance to wear and tear and a modern aesthetic that integrates easily into furniture design. In addition, its materials ensure durability in indoor environments.
The following video shows how you can easily install the aforementioned LED lighting.
Yes, they are compatible with all the aluminium and diffuser profiles for LED strips.
You can calculate the maximum power if you know the supply voltage of the LED strips (12V DC) and the power that you want to install using the following formula: Amps (A) = Power (W) / Voltage (V)Example: A= 48W / 12Va A= 4AThe maximum power that I can connect is 48W at 12V DC.
The Rigel LED luminaire's vibration sensor is automatically activated when the drawer is opened by detecting movement, and switches off after 12 seconds without detecting additional vibrations.
The rechargeable lithium polymer battery has a capacity of 850mAh, offering an autonomy of 600 power cycles per full charge. Charging time is approximately 2 hours using a 5V DC 0.5A USB charger and the included micro USB type B cable.
The luminaire can be installed in two ways:
With screws, for fixed mounting inside the drawer.
With double-sided adhesive tape or adhesive magnet, allowing tool-free mounting and easy removal for recharging.
Included in the package: a rechargeable LED luminaire, screws, adhesive magnet and double-sided adhesive tape. These options ensure quick and easy mounting without the need for additional tools.
No, this luminaire is designed for dry areas and is ideal for drawer or cabinet interiors. Its IP20 rating does not make it suitable for wet or outdoor environments.
Installation dimensions: The switches are designed to be recessed in a 21 mm diameter and 21 mm deep hole to ensure a precise fit.
Materials of construction: The switches are made of durable plastic and are available in white, black or grey finishes, ideal for matching different styles of furniture.
Electrical capacity: Each switch can handle up to 10A at 125VAC or 250VAC, making them suitable for energy efficient luminaires and domestic or office electrical systems.
Compatibility: Yes, the switches are compatible with home or office furniture, being discreetly integrated into surfaces such as wood, plastic or similar.
Package contents: The batch includes 10 switches of the same finish and specifications. Ideal for series installations or multiple furniture projects.
Yes, the Auriga Switch luminaire has a proximity sensor that acts as a switch, with the added bonus that it can connect up three other luminaires to be controlled by the same sensor.A total of 4 Auriga luminaires can be installed (1 Auriga Switch luminaire and 3 Auriga luminaires without a sensor).To this end, it features an input and an output cable, as well as an AMP connector. Moreover, it includes a soft light start and end function that creates an attractive, innovative effect.
The Mizar LED light features an integrated converter that connects to alternating current, so no additional converter is required.
Its installation is easy and simple, as it does not require a converter. In order to mount the lights on a piece of furniture, all you have to do is machine the piece in order to embed the lights or screw the lamp onto the surface of the furniture using its bracket.
The Lich LED light requires a constant voltage LED converter (12V DC) for operation.It has an integrated sensor that keeps the llights on as long as it detects movement and turns it off after 60 seconds if no movement is detected. Moreover, it features a two-metre long, 120º angle detection range.
Its installation is easy and simple, as it is mounted onto the surface of the furniture. You can install it using screws, which will be hidden under the cover cap, or double-sided adhesive tape. Both options are included in the scope of supply of the lights.
The following video shows how you can easily install the aforementioned LED lighting.
Yes, we recommend fully charging the battery of the Castor luminaire before installation.Although some batteries may be partially charged upon arrival, the charge will be minimal and simply for testing purposes. Therefore, a fully charged battery should be used for installation.
The Castor battery-powered light has a range of 700 lighting cycles per charge before the batteries run out.
The battery of the Castor light is recharged with a mobile charger. The charger needs to have a type B micro USB connector and should at least supply 5V DC.This battery is located on the side support with a cover, which must be taken off in order to recharge it.Likewise, it has an LED indicator that goes from red to green when charging is complete after an approximate period of 4 hours.
The battery has an LED indicator that goes from red to green when charging is complete after an approximate period of 4 hours.
The RAL of the white gloss finish on the rails and handles of the Placard sliding door system is approximately 9003. The RAL of the anthracite grey finish is approximately 7043. The RAL of the black finish is approximately 9011.
The Wave 19 handle is specifically designed for cabinets with aluminium sliding doors and a panel thickness of 19 mm.
It is made of high quality aluminium with a white painted finish, giving it durability and an elegant design.
The handle is fixed directly to the aluminium profile of the Placard 74 system, ensuring a stable and secure installation.
Yes, it includes all the necessary components for installation, such as the profile and the tools required for proper assembly.
The Placard trim profile is designed to provide protection for the edges of glass doors, ensuring an airtight and aesthetic seal within the Placard sliding system.
It can be easily adapted to different thicknesses of glass or boards.
It is made of high quality plastic with a grey finish, ensuring durability, flexibility and resistance to continuous use.
Installation is simple: the profile is fitted directly onto the edges of the glass door before inserting it into the sliding system. No additional tools are required.
Yes, the profile is designed to help absorb light impacts, protecting the edges of the glass door against chipping and damage.
Yes, it is 100% compatible.
The following video shows how the sliding door system for wardrobes is assembled.
In order to secure the rails of the Space + sliding door system, it is recommendable to use 4 x 25 mm screws (code 5032505) for 16, 18 and 19 mm units.
The following video shows how the sliding door system is assembled.
No, with this system it is very important to respect the maximum and minimum door measurements, as well as the relationship between the breadth, height and weight of it. To do so, you need to consult the following table:TH = Door height, TB = Door breadth, Result = Maximum door weight for the indicated dimensions.Example: Door dimensions 2000 x 850 (THxTB) so Maximum door weight = 23 kg, although the system is for a max 30kg/door.
No, with this system it is very important to respect the maximum and minimum door measurements, as well as the relationship between the breadth, height and weight of it. To do so, you need to consult the following table:TH = Door height, TB = Door breadth, Result = Maximum door weight for the indicated dimensions.Example: Door dimensions 2.000 x 850 (THxTB) so Maximum door weight = 23 kg, although the system is for a max 30kg/door.
The RAL number of the white finish on the rails and handles of the Placard sliding door system is approximately 9003.
The RAL code of the anthracite grey finish is approximately 7043.
The RAL code of the black finish is approximately 9011.
These lower rails are used along with the Placard sliding door system and a fastening with a clip system.Both rails are very easy to assemble and more cost-effective thanks to the fact that a cover is not required to hide the fastening screws.The difference is that the first lower rail is available for boards of a 10mm, 16mm and 18mm thickness, and the second rail is designed for easy flush mounting on the edge of the furniture for 10 mm and 16 mm thick board.
The Cancun knob has a diameter of 28.5 mm.
It is made of zamak and is available in chrome, satin nickel and black painted finishes.
No, installation is simple and only requires standard tools such as a screwdriver.
This knob is compatible with drawer fronts and cupboard doors, making it ideal for kitchen, bathroom, home and office furniture.
The package includes 1 knob and its mounting screw, individually packed to avoid scratches.
For a complete installation, the top and bottom rail of the Glider sliding system must also be available, as the brake is integrated into these components.
The brakes are made of high-quality technical plastic, which guarantees mechanical strength, dimensional stability and a long service life even in frequently used environments.
Its function is to cushion the closing of the sliding door, avoiding sudden knocks, protecting the furniture and offering a quieter and more controlled closing.
Yes, the kit includes 2 brakes and an Allen key, allowing installation at both ends of the sliding door for symmetrical operation.
The Glider braking system is designed to work in conjunction with the top and bottom rails of the Emuca Glider sliding system, ensuring full compatibility within the range.
These spacers guarantee a correct connection between parts during the assembly of sliding doors. They are placed to level and align the assembly, avoiding displacements or misalignments between panels.
They are designed to be used together with the handle profiles, the upper and lower carriage and the dust cover. They are applied directly to the panel without the need for machining.
The spacer uses a pressure sensitive adhesive (PSA) pre-applied to one side. It is only required to remove the protector and press firmly onto the clean, dry surface.
They must be fitted prior to assembly of the profiles to ensure alignment and stability of the parts during assembly of the door assembly.
They are made of high-density technical felt, with sufficient thickness to compensate for manufacturing tolerances without warping. Each spacer is flat and rectangular, designed to fit the profile.
The following video shows how the sliding door system for wardrobes is assembled.
In order to get the door to sit flush with the unit, with the Gilder sliding system, you need to take into account the dimensions of the following diagram:
The Glider track is fitted into a 17 mm wide by 7 mm deep groove in the base of the module. This machining ensures that the door is perfectly aligned and concealed, favouring a minimalist and functional design.
Matt anodised aluminium provides high resistance to abrasion, corrosion and frictional wear. In addition, it improves bearing sliding, reduces noise and maintains a professional appearance even in heavy-duty applications.
Yes, the Glider track is compatible with soft closing systems when used in combination with specific Glider sliding system hardware. It is important to check that the dampers are correctly aligned with the door travel and the bottom profile.
The track comes in units of 2.35 metres in length and is supplied in packs of 20 units. This format facilitates logistical planning, storage and cutting to size in mass production projects or contract installations.
Periodic cleaning of the track channel with a dry cloth to remove dust or debris is recommended. In addition, it is advisable to check the alignment of the guides and to check the integrity of the bearings at least once a year in frequently used installations.
The matt anodising protects the profile against oxidation and improves scratch resistance. In addition, as it is made of aluminium, it offers controlled thermal expansion, which is key in large format enclosures or installations close to heat sources, avoiding deformations or structural noises.
No, this profile is designed exclusively for straight applications. Due to its internal structure and function as a precision bearing guide, it is not recommended to bend it or manipulate its geometry, as this will affect the performance of the sliding system.
The Glider system with brake allows a progressive and silent closing, avoiding knocks and prolonging the life of the components. The direct integration of the brake in the upper rail eliminates visible elements and improves the functional design of the cabinet.
Yes, thanks to its anodised aluminium construction, this rail is resistant to humidity and steam without rusting or losing rigidity. It is a reliable solution for furniture in kitchens or built-in cabinets in well-ventilated bathrooms.
The profile is available in lengths of 2.35 m and in packs of 20 units, which makes it easy to cut to size using automatic cutting machines. In addition, the machining required on the module is standard and can be replicated by CNC, ideal for assembly line production or modular manufacturing processes.
The maximum diameter that a table top or surface of a table can have with a Stay 5 or Stay 6 leg in order to avoid it toppling over when we support ourselves on one end is:- 1,000 mm for the Stay 5 legs. - 1,200 mm for the Stay 6 legs.
According to the ISO standard: 7170:2005 Emuca supports can take a maximum weight of 40 kg per metre evenly distributed.
The Giotto leveller allows a precise height adjustment of up to 25 mm by means of a hidden nut located inside the module. This adjustment is easily carried out from inside the cabinet, ensuring an aesthetically pleasing installation with no visible elements from the outside.
Thanks to its body made of Zamak, an alloy of zinc, aluminium, magnesium and copper, the Giotto leveller withstands static loads of up to 90 kg per support point. This makes it particularly suitable for heavy-duty furniture, contract applications and large-format storage solutions.
The internal design of the Giotto allows it to be completely integrated into the base of the furniture, avoiding interference with skirting boards, baseboards or other external elements. This improves the visual cleanliness of the whole, facilitates maintenance and allows precise levelling without altering the design.
Yes, the Giotto leveller has been designed to fit standard bores of Ø15.3 mm and 10 mm depth, allowing a smooth integration into CNC production lines. Its compact design favours automated pre-assembly in industrial plants.
Zamak offers excellent resistance to compression and frictional wear, maintaining stable dimensions even under high loads. In addition, it is highly resistant to oxidation and humid environments, surpassing technical plastics and galvanised steel in terms of durability and dimensional stability.
The RAL of the finish of the accessories for inside Moka wardrobes and dressing rooms is approximately 8019.
Each leg has a height of 695 mm and a width of 695 mm, offering a symmetrical structure ideal for dining or kitchen tables.
The set includes 2 cross-shaped table legs with all necessary accessories for installation.
The legs are easily screwed to the tabletop using the screws included in the kit. In addition, cover caps are included to hide the screws and prevent marks on the floor.
They are designed to support up to 40 kg per leg, which makes them suitable for heavy duty tables.
This model is available in two hard-wearing and modern finishes: white painted and black painted, both made of highly durable steel.
The legs have a fixed height of 400 mm, which makes them perfect for side tables or low tables.
The set includes 4 table legs in the form of a circular rod together with the necessary accessories for installation.
The legs are fixed with screws included in the kit, and are easily installed by screwing the metal base to the table top.
These legs are made of steel and are finished in white or black epoxy paint, ideal for modern interiors.
Each leg can support up to 40 kg, guaranteeing stability for different types of boards.
These legs have a fixed height of 710 mm, ideal for standard height dining or work tables.
They are easily installed by screwing the metal base to the board with screws, which are included in the set.
Each Hairpin leg can support up to 40 kg, providing stability even on large boards.
They are made of steel with a high quality epoxy paint finish, available in black or white.
The kit includes 4 legs and all necessary accessories for installation.
They are available in 720 mm, allowing them to be adapted for use on standard tables as well as on slightly higher surfaces.
Yes, the kit includes screws and anchor plates for quick and secure installation on the dashboard.
They are made of steel and available with a black or white epoxy painted finish, ensuring durability and corrosion resistance.
Yes, its base with holes allows mounting on a wide variety of boards, adapting to multiple thicknesses and materials.
Each rectangular leg has a load capacity of up to 80 kg, making them suitable for desks, dining tables or work surfaces.
The following sketch shows details of the machining that should be carried out on aluminium doors for the Aluroller 2 sliding system.
The bracket requires a 5 mm diameter and 8 mm deep drill hole for a correct fit on the side of the furniture, which allows a stable and concealed fixing of the shelf.
Its cylindrical design includes a Ø7.6 mm base that fits into the perforation and a 4 mm flange that protrudes to act as a fulcrum, ensuring stability without protruding over the edge of the shelf.
It is made of steel with a nickel-plated finish that provides resistance to rust, greater durability in humid environments and a discreet aesthetic compatible with any furniture finish.
The bracket is available in pack sizes of 100 and 5,000 units, making it ideal for both industrial series assembly and for replenishment in distribution warehouses.
The design is intended as a concealed support point for standard wooden shelves. For heavy loads or long shelves, it is recommended for use in conjunction with other reinforcement elements.
The bracket is designed for glass panels with a thickness of 4.5 mm, ensuring a firm fit without the need for additional adapters.
The bracket is pressed into a hole drilled in the side of the module. The stem is inserted 7 mm from the edge and secures the glass by means of its coupled shape with a 16 mm high support base.
The support base is 10 mm long and 16 mm high, providing a stable platform that prevents the glass panel from slipping.
Yes, this bracket is ideal for display cabinets, light shelving or decorative modules where a visually unobtrusive and effective fixing for glass shelves is required.
The product is presented in boxes of 2000 units, facilitating handling and replacement for furniture manufacturers, assemblers or professional installers.
The Evo bracket is fixed by means of a bolt to be embedded in a Ø5 mm truss, which allows a quick assembly without specific tools, ideal for modular shelving applications.
It is designed to accommodate glass shelves with a thickness of 6 to 8 mm, and includes a rubber protection on the top face to prevent slippage and damage to the glass.
Yes, it incorporates a locking mechanism with a plastic screw at the bottom that presses the glass from below, ensuring a firm hold even in environments with movement, such as bathrooms or kitchens.
Thanks to its firm fixing system and robust design in nickel-plated Zamak, the Evo bracket is suitable for hanging shelves, display cabinets or furniture exposed to moderate vertical stresses.
The nickel-plated finish not only provides a modern, shiny aesthetic appearance, but also improves resistance to oxidation and wear, prolonging the life of the bracket in humid environments.
The Evo bracket is designed for glass shelves with a thickness of 6 to 8 mm, providing a firm grip by means of a protective rubber that prevents slipping and vibrations.
This bracket uses a screw system with a plastic screw integrated in the lower part that facilitates the fastening of the glass to the bracket, offering security and stability to the assembly.
Yes, thanks to its fixing screw, the Evo bracket allows the module to be transported with the shelf mounted without any risk of displacement, which optimises the logistical and installation process.
It is available in nickel plated and rust black finish, both made of high quality zamak, with excellent resistance to oxidation and wear, ideal for bathroom or kitchen environments.
For correct support and weight distribution, it is recommended to use 4 Evo supports per glass shelf, one at each corner of the shelf.
No, a Supra bottle rack can only be assembled on the left-hand side, as you have the guide rails on the left-hand side.
This bolt acts as an adjustment piece and final grip on minifix joints, allowing precision adjustment to be made on shelves or panels where close tolerances are required in the final assembly.
The bolt is designed to work with eccentrics using a 6 mm shank and M6 collar, fitting perfectly into Ø4.2 mm holes with a recommended depth of 10 mm.
The zinc-plated coating improves resistance to moisture and rust, making it ideal for applications in kitchen and bathroom furniture or areas with varying levels of humidity.
This bolt is supplied in packs of 250 units, facilitating its management in assembly lines and industrial assembly with high product turnover and the need for logistical efficiency.
The body of the bolt must be placed in a Ø4.2 mm machined hole, which guarantees the correct anchoring inside the board without deformation or play, allowing a firm and precise joint.
This lot contains wood strands with a diameter of 8 mm and a length of 35 mm, suitable for press joints in wooden boards.
Yes, it is essential to pre-drill both in diameter and depth to ensure a precise and effective connection between the pieces of wood.
The strands are made of beech wood, known for its hardness and excellent mechanical behaviour in glue joints for professional carpentry applications.
These tufts are designed for pressure bonding, where the application of glue in the bore and in the tuft ensures a firm fixation, without the need for screws.
They are ideal for assemblies in furniture, cabinets, kitchen units, solid wood structures or panels where an invisible, strong and durable joint is required.
Aguila brackets are designed for wooden or glass shelves with thicknesses from 4 to 40 mm, making them versatile for different configurations of domestic or commercial furniture.
The maximum load capacity per pair of brackets is 40 kg, provided that the brackets are installed correctly and appropriate hardware is used for the type of wall.
The Aguila bracket has a top cover and a bottom rubber band that allows the shelf to be firmly fixed without the need for machining, simply by exerting pressure on both surfaces.
Yes, the brackets are made of zamak and plastic with an aluminium painted finish, offering excellent resistance to humidity and everyday use in kitchens and bathrooms.
This support complies with the UNE-EN 14749:2006 standard for storage furniture in kitchens and bathrooms, guaranteeing its safety and performance in residential applications.
Pelican brackets are designed to support up to 40 kg per pair of brackets, provided they are installed correctly on suitable surfaces and with compatible fixings. Their resistance has been verified in accordance with UNE EN 14323:2016.
They are compatible with both wooden and glass shelves, as long as the thickness is between 3 mm and 40 mm. The design of the bottom cover allows a firm hold without the need for machining on the shelf.
The black painted finish not only adds contemporary aesthetic value, but also improves corrosion resistance in indoor environments, making it ideal for kitchens, living rooms or areas of intensive domestic use.
Each bracket includes screws and plugs designed to ensure a stable fixation on sturdy surfaces. It is essential to check the type of wall and use suitable anchors to ensure the indicated load capacity.
The Pelícano stands out for its robust design, with a painted zamak body, designed for intensive use. Unlike the Eagle model, the Pelican allows a stronger hold for thicker shelves, while still offering an elegant decorative finish.
The Pozidriv design provides a better engagement between the screwdriver and the screw, reducing the risk of slippage or wear during installation. This improves accuracy and safety in repetitive assembly or with power tools.
Only a Pozidriv 2 compatible screwdriver is required for secure installation. No pre-drilling is necessary, as they are designed for direct fixing on wooden parts with a 5 mm diameter pre-drilled hole.
These screws are suitable for connecting furniture fittings, especially in structures where a firm and stable fixing is required without the need for nuts or inserts. They are ideal for quick pre-assembly on production lines.
The screws have a diameter of 6.2 mm and a total length of 13 mm, offering an optimum balance between penetration and strength for general purpose use in wood or chipboard up to 19 mm thick.
The zinc-plated finish provides additional resistance against corrosion and rust, which is essential in humid environments or to extend the life of hardware in assemblies exposed to variable conditions.
The Míro brackets are designed to hold wooden or glass shelves with a thickness between 4 and 20 mm, thanks to their design with a top cover that fixes the shelf without special machining.
According to the UNE-EN14350:2006 standard, each support can support up to 40 kg, which makes them suitable for both domestic and professional environments that require a firm and secure hold.
This bracket is wall-mounted by means of plugs and screws included in the set, and its zamak body together with the plastic cover ensure a precise and aesthetic fixing.
The aluminium painted finish, together with the plastic and metallic materials used, provides good resistance to humidity, although it is recommended to avoid prolonged exposure to direct water.
The design of the Miro stand combines elegant curved lines with a concealed fixing system, allowing it to be integrated as a decorative element in visible rooms in the home or office without compromising the aesthetics of the environment.
These brackets are designed for screw fixing to the furniture surface, providing sturdy 90° right-angle connections between wooden boards using conventional screws.
The brackets are made of sheet steel with a zinc-plated finish, which provides high mechanical strength, protection against rust and excellent performance in interior assemblies.
Each bracket measures 42 mm high by 42 mm wide and has a sheet thickness of 1.5 mm, which allows it to maintain rigidity in demanding joints without adding unnecessary bulk to the furniture.
It has 4 holes for fixing screws, allowing a secure and balanced mounting. Self-tapping screws with a diameter of up to 4.5 mm are recommended.
They are ideal for joining panels at right angles in structures such as cabinets, modules, shelving and other interior furniture. They are also frequently used in reinforcement and rapid assembly processes in production lines or craft assemblies.
These brackets are designed to join wooden boards at 90° right angles and are particularly useful for modular furniture, cupboards and shelving structures that require strong and durable reinforcement.
The zinc-plated finish provides excellent protection against rust and wear, making them ideal for both indoor environments and workshops where high mechanical durability is required.
These brackets measure 70 mm long by 22.5 mm high, and are made of 1.5 mm thick steel plate, ensuring rigidity and adequate structural support at the point of attachment.
They have 4 Ø4.5 mm mounting holes that allow the use of standard self-tapping wood screws, which facilitates quick installation without the need for pre-drilling in most applications.
The brackets are available in batches of 50 units or industrial packs of 500 units, making them suitable for both do-it-yourself and mass production requirements in professional environments.
This system is designed for boards at least 16 mm thick, providing a secure fixing for shelves in cupboards, kitchens or general furniture.
The couplings require Ø20 mm holes with a minimum depth of 12.5 mm, ensuring a precise fit without compromising the structural integrity of the board.
The hitch is made of nickel-plated zamak, while the bolt is made of turned steel with a zinc-plated finish, a combination that ensures rust resistance and long-term durability.
The kit includes bolts of 8 mm and 11 mm in length and 6 mm or 8 mm in diameter, allowing for different mounting configurations depending on the design of the furniture or shelf.
The set contains 20 couplings and 20 bolts, presented in a format ideal for professional installations or mass production, with a nickel-plated finish for uniform aesthetics and corrosion protection.
The Hook system is certified according to UNI 16776 standard to support up to 70 kg per set of hangers, guaranteeing safety and reliability in kitchen, bathroom or household overhead units.
It offers a height adjustment of 15 mm and a depth adjustment of 43 mm, which facilitates the precise alignment of the module with the wall and the levelling between adjacent modules, optimising the assembly process.
The set of 5 kits contains: 5 right hangers, 5 left hangers, 5 right covers, 5 left covers, 5 mounting brackets and the necessary screws for fixing, allowing up to 5 modules to be fitted.
The included covers allow the hangers to be covered once installed, offering an aesthetically pleasing, clean and professional solution, ideal for both bespoke furniture and mass production.
Yes, the Hook system allows assembly without the need to machine the back of the module, which simplifies assembly and improves efficiency in industrial and professional installations.
The eccentric system provides a strong and effective fixing with the possibility of dismantling, ideal for robust structures such as beds or wardrobes. Its design avoids the need for visible screws, improving the aesthetics of the furniture.
A Ø35 mm diameter and 13 mm deep bore is required to accommodate the eccentric cam, plus additional machining for the bolt and nut. Fixing is by means of an internally rotating eccentric cam.
The set consists of eccentric and nut in natural zamak, bolt in zinc plated turned steel for high mechanical resistance and cover in white plastic for an aesthetic and discreet cover.
It is designed for boards with a minimum thickness of 20 mm, guaranteeing a firm joint without risk of weakening. It is ideal for home and contract furniture requiring strong and durable joints.
The kit contains 10 eccentrics, 10 bolts, 10 nuts and 10 caps, allowing up to 10 robust and aesthetically pleasing connections to be made without the need to purchase additional components.
Azor brackets are designed for shelf thicknesses between 4 and 25 mm, making them compatible with a wide variety of shelves in both wood and glass.
The Azor bracket is secured with the included screws and is elegantly concealed by an aluminium painted top cover, providing a clean and professional finish.
The recommended load capacity per pair of Azor brackets is up to 40 kg, provided they are installed correctly on a brick wall or heavy duty surface.
Yes, they are made of plastic and zamak with an aluminium painted finish, materials that offer good resistance to humidity, so they can be installed in kitchens and bathrooms.
Yes, Azor supports comply with the UNE-EN 14360:2006 standard, which regulates the safety and performance requirements for hanging storage systems.
These caps are designed to cover standard diameter visible head screws in furniture and are specifically compatible with screws with a head diameter of 13 mm.
Yes, the caps are made of plastic with high quality adhesive that ensures a long-lasting fixation on all types of furniture surfaces, both in dry indoor and everyday environments.
For optimal adhesion, it is recommended to clean and dry the surface where the cover will be applied, removing any dust, grease or residues that may interfere with the bonding.
The batch of 1,000 caps is ideal for mass production processes or industrial installations, allowing a large number of screws to be covered with a professional, uniform and clean finish.
According to the product description, this specific batch is in white, but the Emuca range of adhesive covers includes white, beech, oak, grey and black finishes, covering both classic and modern styles.
Nickel-plated zamak provides an excellent combination of mechanical strength and corrosion protection, ideal for demanding indoor furniture applications where durability and bright metal aesthetics are required.
They are specifically designed for 90° fastenings between wooden boards, providing solid and precise joints in modules, shelves or frames, both in domestic and contract environments.
The 2-hole format optimises mounting in areas with limited space, reducing installation time without compromising the strength of the fixing, ideal for compact structures or quick assembly.
Each bracket measures 20.5 x 20.7 mm, dimensions that allow precise installation at standard right angles and are compatible with a variety of board thicknesses used in modular furniture.
The batch includes 50 units with compact packaging, which allows for efficient inventory management and ensures immediate availability on production lines or in professional workshops.
These supports can hold shelves with a maximum recommended load of up to 40 kg, complying with the UNE-EN14320:2006 standard for household and kitchen components.
The anti-slip design with rubber on the upper side of the bracket ensures a secure hold and prevents movement or slipping of the shelf, making it ideal for both glass and wood.
The matt nickel painted finish not only enhances the aesthetics of the substrate, but also offers additional protection against rust and wear, ideal for wet or heavy use environments.
They are compatible with wooden or glass shelves with thicknesses from 6 to 25 mm, which allows for great versatility in carpentry and modular furniture projects.
The system includes plastic covers that allow the screws to be completely hidden, improving the final aesthetics and offering a clean and professional finish after installation.
The T15 plug is specifically used to cover the bore of the T15 system's Ø15 mm ring reinforced eccentric, providing a secure finish and protecting the internal mechanism of the joint.
This plug is only compatible with the reinforced eccentric with Ø15 mm T15 ring. It is not compatible with other models such as the eccentric 8054501, which must be taken into account when planning the assembly.
It is made entirely of plastic, which makes it lightweight, easy to install and suitable for integration in furniture solutions with aesthetic and functional requirements.
In addition to covering the eccentric system, the cap improves the appearance of the furniture by concealing visible screws or fittings, providing a clean and uniform surface finish.
Depending on the SKU available, it is available in a white or black finish, which allows it to adapt to different shades and styles of furniture without compromising the aesthetics of the whole.
The Spiral pin is designed as a key component of the closed tek coupling system. Its function is to generate support from inside the panel and to transmit the clamping force through the corresponding spiral coupling.
This bolt is manufactured from turned steel with a zinc plated finish, has a diameter of M6 and a total length of 59 mm. It is designed to provide high strength and durability for structural joints in furniture.
The M6x59 Spiral bolt is exclusively compatible with the Ø15 mm diameter Spiral coupling made of zamak. The combination ensures efficient fastening in technical furniture structures.
Assembly must be carried out by inserting the bolt into a through or press-fit hole in the board, respecting the 6 mm diameter and exposing the thread to be connected to the Spiral coupling.
Each presentation contains 500 units, which facilitates its use in production lines, contract furnishing projects or industrial facilities with a high volume of assemblies.
Yes, for panels of 16 mm thickness, is possible to use the module 500 mm Vantage-Q drawer.
The bracket is designed to accommodate glass shelves with a maximum thickness of 8 mm, a length of up to 180 mm and a width of 130 mm. These specifications ensure correct support and load distribution.
A 5 mm diameter cylindrical hole is required for mounting the bracket. This design allows quick and secure installation in side panels of cabinets or display cabinets.
The nickel-plated zamak body provides structural strength and durability, while the plastic head prevents damage to the glass and ensures a non-slip grip. This combination maximises safety and service life.
The support is presented in packs of 1000 units, ideal for high rotation installations or industrial mass production. This presentation facilitates stock control and efficient warehouse replenishment.
Yes, thanks to its aesthetic nickel-plated finish and compact design, it is ideal for both display cabinets and domestic cupboards. Its visual discretion makes it a functional and decorative solution.
Yes, the Vantage-Q waste container is compatible with the 18 and 19 mm Slim drawer.
The following video shows how you can easily assemble the abovementioned storage system in a kitchen.
To install this bracket it is necessary to drill a Ø 5 mm hole in the vertical panel where the bracket's fastening bolt will be inserted.
The plastic pad is 3.5 mm thick and provides a firm and tight base that prevents the glass shelf from slipping or vibrating, improving the stability of the assembly.
The holder has a 15.75 mm long, 11 mm wide and 13.5 mm deep body. These dimensions make it compatible with most standard glass shelves.
It is ideal for glass shelves in bathroom furniture, display cabinets, living rooms or kitchens where a discreet, resistant and aesthetically pleasing nickel-plated finish is required.
The bracket is made of nickel-plated zamak for strength and durability, while the glass support area is made of transparent plastic to avoid scratches and to improve the aesthetics of the mounting.
The 21B bracket is installed by embedding the dowel into a vertical panel. This system does not require complex tools, as the dowel is inserted into a pre-drilled hole 10 mm in diameter and 14 mm in height, ensuring fast and efficient fixing.
The support area is 12 mm long and the dowel is 8 mm long with a diameter of 5 mm, which allows a safe and stable insertion of the glass without displacement during use.
The nickel-plated finish provides a layer of protection against corrosion and rust, improving the durability of the component even in wet environments or when exposed to cleaning products.
This bracket is designed to securely hold flat glass shelves, commonly used in display cabinets, bathroom furniture or home furnishings. The plastic base prevents direct contact between the metal and the glass, protecting it from damage.
The product is sold in batches of 1000 units, making it an ideal solution for manufacturers, distributors or large-scale installations requiring multiple media in an efficient manner.
For correct installation, a 10 mm deep, 3 mm diameter hole must be drilled in the vertical panel, ensuring the precise fit of the recessed section of the bracket.
The plastic strip acts as an anti-slip element, providing a secure base for the glass shelf and preventing accidental displacement or vibration.
The visible part of the bracket when mounted measures 10 mm in length by 9 mm in diameter, allowing a compact, functional and aesthetic design for unobtrusive installations.
It is made of nickel-plated steel with a plastic insert, which provides high resistance to corrosion, excellent durability and an aesthetic finish suitable for demanding environments such as bathrooms or kitchens.
The packaging contains 100 pieces of nickel-plated shelf bracket, ideal for professional projects or series installations that require technical consistency and time saving.
The Rostro system allows a much stronger and more secure fastening, with a higher tightening capacity than an eccentric or Fix coupling. Furthermore, its installation is completely concealed, offering impeccable aesthetics in visible solutions such as wardrobes and bookcases.
The tensioning system of the Rostro coupling is operated with an Allen key No. 4 and is accessed through a Ø6 mm hole in the dashboard, which allows the mechanism to be completely hidden from view.
Its machining is very simple and similar to that of an eccentric, which facilitates its implementation without the need for specialised machinery or complex processes in the workshop or production line.
Yes, the Rostro system is compatible with the Normal 430 leveller, which allows the integration of adjustment solutions without sacrificing the aesthetics and functionality of the furniture.
The Rostro coupling is specially designed for cabinets, bookcases and exposed shelf systems, where a robust, aesthetically pleasing and completely concealed connection is required.
The Normal 720 coupling is ideal for fixing skirting boards or any type of side, bottom or top trim on furniture, offering a discreet and effective solution adapted to the design of the furniture.
This system is fixed by pressing or clipping onto its corresponding bolt, which allows for quick installation without additional tools, facilitating assembly and disassembly during manufacturing or maintenance processes.
The coupler is designed to be compatible with standard bolts used in furniture joining systems, especially those designed for concealed and aesthetic solutions.
It is made entirely of steel, which guarantees high mechanical resistance. Its natural finish provides durability and optimal integration into metal structures without requiring additional treatments.
Yes, thanks to its clipping mechanism, the Normal 720 coupling allows solid but also easily removable joints, ideal for modular furniture that requires flexibility in configuration or transport.
The flat head allows the screw to be completely flush with the surface of the board, giving a clean and professional aesthetic finish, ideal for visible applications in melamine or chipboard furniture.
This screw is ideal for fastening in materials such as melamine, MDF or chipboard, thanks to its 6 mm fine pitch thread that ensures a firm grip without damaging the structure of the board.
With a length of only 17 mm and a design that allows the screw head to be concealed, this model minimises the risk of contact with protruding edges, making it suitable for furniture in spaces frequented by children.
For a safe and precise installation, it is recommended to drill a 5 mm diameter hole beforehand, ensuring the correct insertion and fastening of the screw without damaging the material.
Both finishes improve corrosion and rust resistance. Zinc plating offers a high degree of protection and durability, while nickel plating adds additional aesthetic value for more visible applications.
Yes, as long as you have a 13 mm wide square railing , or a straight rib with a minimum internal height of 135 mm and width of 13 mm. If I have a 800 mm wide module, and a 16 mm thick side panel.
The formula is: internal module width -70. For this particular case, the internal width of the module will be 800 - 32 = 768 mm. From this measurement we subtract 70 to get the length to cut the profiles = 666 mm.
The locking system of the Sekure bracket prevents the shelf from shifting or falling when the furniture is turned over, which provides additional safety during transport and handling, especially in professional installations or large furniture projects.
No tools are required. The system incorporates a manual locking plate that allows the steel bolt to be easily fixed and released, making assembly and disassembly quick and easy, even in confined spaces.
The bracket is available in multiple finishes: white, grey, anthracite grey and brown plastic. It is also available in two diameters: 3 mm and 5 mm, adapting to different design and resistance needs.
In addition to the manual locking, the bracket has a double insert design that improves the fixation: the bolt goes 7.5 mm into the bracket and the longer part (10 mm) is on the side of the furniture, increasing its stability.
The Sekure bolt-on bracket is supplied in packs of 250 units, which makes it easy to implement in production lines, industrial joinery or large account installations.
This design allows for quick and versatile installation depending on the diameter of the available hole. By offering two pivot sizes, the installer can choose the most suitable option for the project without the need to modify the glass.
The bracket has an upper screw fastening system that effectively immobilises the glass, preventing accidental displacement, even on shelves with frequent use or moderate load.
The Portofino bracket is designed to hold glass shelves between 4 and 8 mm thick, making it a flexible solution for home furnishing, bathroom, kitchen or light commercial applications.
The body is made of zamak, a robust and durable alloy, and is available in two finishes: nickel-plated for a shiny metallic look and rust black for a more modern or industrial style.
The bracket is sold in packs of 500 units, making it easy to use in manufacturing environments or large-scale installations, optimising assembly times and inventory management.
The bracket measures 11 mm high, 11 mm wide and 10 mm long, while the integrated bolt has a diameter of 5 mm and a length of 7 mm. These dimensions allow for a compact and unobtrusive installation, ideal for wooden shelves with aesthetic and functional requirements.
It is made of Zamak, an alloy of high hardness and durability, and finished with nickel plating that provides protection against corrosion. This makes it particularly suitable for applications in wet or heavy-duty environments such as kitchens, offices or commercial furniture.
The 5mm diameter bolt is completely concealed by being recessed into the board, enhancing the aesthetics of the furniture and minimising visible fixing points, ideal for contemporary or modular design furniture where appearance is key.
Thanks to its dimensions and robustness, this bracket can be installed on medium or high density boards (such as MDF or reinforced chipboard) and is ideal for standard thicknesses. Its nickel-plated fastening ensures a firm and secure connection even on furniture under load.
The product is presented in packs of 100 units, which facilitates stock management and supply in mass production projects or large commercial or domestic furniture installations.
The nut must be pressed into a pre-drilled hole with a depth of 13 mm and a diameter of 17.3 mm. These dimensions guarantee a firm and secure seat for the workpiece in the panel.
The part has an internal metric diameter of 10.1 mm, which allows for a solid connection with bolts or compatible fastening systems, ensuring stability in structural joints.
It is recommended to use this nut in conjunction with Rotsup levellers and Rosto couplers, which have been specifically designed to ensure accurate and durable installation of the assembly.
The natural zamak finish provides good mechanical and corrosion resistance without the need for additional coatings. It is ideal for concealed applications where reliability is required rather than visible aesthetics.
It is designed to form part of structural joining systems in furniture modules, especially in cabinets, bases and structures where a concealed, robust and aligned fixing with professional solutions is required.
The bracket is installed by means of a Ø5 mm knurled bolt which is pressed laterally into the furniture and a second bolt which reinforces the support.
The main bolt is Ø5 mm and the design allows use with shelves of any thickness.
The use of 4 Beak brackets is recommended to fix a shelf correctly.
Yes, it is suitable for wooden shelves regardless of the thickness of the board.
It is made of zamak and available in nickel-plated or black zinc-plated finish, depending on the selected reference.
They are ideal for flat surfaces such as wooden floors, ceramic, vinyl or even tempered glass, thanks to the adhesive on the bottom base.
The hemispherical shape offers discreet and effective protection, distributing the impact better and preventing damage to both the door and the contact surface.
Each top has a small diameter of 42 mm, making them compact and perfect for spaces where a visually discreet top is desired.
Yes, they can be easily removed if the adhesive is pre-heated. This minimises the risk of leaving residue or damaging the floor.
They are made of plastic with a transparent finish, offering durability, impact resistance and a visually unobtrusive design.
It is installed by means of an adhesive base located at the bottom that is easily fixed to the floor without the need for tools.
The cylindrical shape allows for uniform impact distribution and unobtrusive aesthetics, making it ideal for spaces where it is desirable to minimise the visibility of the stop.
Each stop has a compact diameter of 42 mm, making them suitable for confined spaces, passageways and interior doors.
They are suitable for flat surfaces such as ceramic, wood, parquet, vinyl or PVC.
They are made of high-strength transparent plastic, combining durability with a virtually invisible design.
The Levelup 3 hanger supports up to 65 kg per unit, making it ideal for tall units in kitchens and bathrooms where high strength and safety are required.
Allows height adjustment of 18 mm and depth adjustment of 16 mm, facilitating precise adjustment of the module once installed. It is pressure-fitted into Ø 10 mm holes.
Yes, when mounted on the outside of the module and fixed to the wall, it is compulsory to use an additional plate for correct fastening.
It is made of steel with a zinc-plated finish, which makes it corrosion resistant, making it suitable for demanding environments such as kitchens and bathrooms.
Yes, its design allows for installation on either the left or right side of the module, making it versatile for multiple configurations.
It is very simple – the Hook brackets that fix the profile to the wall have a height regulation of ±5 mm.
These brackets have two screws – one of them attaches the module to the wall, and the other regulates the height and ensures it is fully horizontal.
The mechanism raises the surface 13,5 cm from the table.
The mechanism raises the table 13'5cm.
The following video shows how you can easily assemble the Simply hidden shelf bracket.
It is recommended that the side panel be at least 16 mm thick to ensure a firm hold and to avoid deformation over time.
No, these brackets are designed for fixed installation. To adjust the height, it is necessary to define the correct position before mounting.
These brackets are specific for 30x15 mm section bars. For round bars, brackets designed for this profile must be used.
The assembly is embedded in the side of the furniture, which provides greater strength and stability to the structure.
Each lot contains 50 side brackets, ideal for multiple cabinet installations or large volume projects.
Yes, the drawer’s width and depth measures are the same. Only the lock pin machining is in a different position.
To install the bumper it is necessary to carry out a machining of Ø5 mm and 10 mm deep, in this way the bumper is correctly embedded in the panel.
The rods are made of aluminium, with high-strength plastic ends for durability and safety.
Each rod is 459 mm long from end to end.
Yes, the rods can be used together with hanging clips for additional garments.
Yes, the mocha finish RAL 8019 is designed to match other cabinet accessories.
The lot includes 7 trouser rods ready for installation.
Yes, it is possible to recharge the Rigel light with a mobile phone charger. The charger needs to have a type B micro USB and should at least supply 5V DC 0,5A.
The charging time will vary depending on the amperage of the charger. It is recommended to use 5V DC 1A chargers, therefore the estimated charge time is 2 hrs.
This light has a range of 600 switching cycles per charge before the battery runs out and it has an LED indicator that goes from red to green when the charge is complete following an approximate time of 2 hours.
The following video shows how to assemble such a box in a simple way:
These slides have a load capacity of up to 68 kg, whereas standard slides support around 30-35 kg. Their reinforced design and high quality ball bearings allow them to be used in more demanding applications.
The height of 51 mm provides a larger contact surface with the cabinet, which increases stability and reduces drawer twisting, especially in wide or heavy drawers.
Full-extension allows the drawer to open fully, providing unrestricted access to its contents, which is especially useful in work or storage environments where heavy objects are handled.
These slides include a trigger system that allows the drawer to be removed quickly and easily, which facilitates maintenance or cleaning tasks without the need for additional tools.
They are ideal for industrial furniture, high capacity filing cabinets, workshop furniture and storage in kitchens or areas where heavy loads need to be supported in a stable and safe manner.
The hook set is designed to attach the drawer front to the ribs, providing a secure, strong and simple connection. It is compatible with Vertex, Concept and Convex drawer systems.
The parts are made of sheet steel with a zinc-plated finish, which provides high corrosion resistance and durability.
This product includes two mounting methods: a screw mounting method and a snap-on mounting method, allowing it to be adapted to different installation needs. The kit includes 4 x 4x20 mm screws and a set of hooks.
It is designed for the following drawer heights:
Vertex: 83 mm, 133 mm.
Concept: 105 mm, 138 mm.
Convex: 90 mm, 128 mm.
Secure fixing is achieved by means of a robust design that allows the hitch to be installed inside the side of the drawer, fixing it firmly to the front of the drawer, ensuring stability and strength even with prolonged use.
The kit includes soft-close full-extension slides, a set of ribs, a set of rear hooks, a set of front hooks and screws for mounting.
This drawer supports up to 40 kg load. Its slides allow full-extension with soft closing, which guarantees smooth sliding and no jerky bumps when closing.
It is made of painted steel with a metallic grey RAL 7045 finish, which provides strength, durability and a modern aesthetic for different styles of furniture.
Yes, it is necessary to purchase the cut-to-size boards for the bottom, back and border of the drawer separately, as they are not included in the kit.
It is ideal for use in kitchens and bathrooms, providing a sturdy, stylish and easy to install storage system with a smooth and robust opening for everyday use.
What load capacity does the system support and how is it distributed?
What tools and machining are necessary for its installation?
Where is the hanger installed and what type of wall anchor is used?
How is the position of the module adjusted once it is hung?
What materials make up the kit and what advantages does it offer in demanding environments?
The main function of an unsprung hinge is to allow the use of push pieces to open the door with a push system in order to ensure a smoother opening of the door without the inertia generated by an inverted hinge.It can also be used in combination with soft-close hinges on doors with a great number of hinges in order to accelerate the closing speed of the door, since they are compatible with the entire X91 hinge family.
