1 Bumper

Flush-mounted bumpers for doors and drawers. The recessed bumper has two functions, to protect the damping of noise that may occur in the movement with the closing of a drawer or a door and can also be used to leave the drawer fronts or doors in the same plane. The latter function is due to the fact that the bumper protrudes a distance of 2.3 mm into the table top.

The bumper can be installed on the corners of the drawer fronts or if it is a cabinet on the door or also on the modules themselves. It is recommended to use 4 bumpers, one in each corner.

The installation requires a machining in the furniture of Ø5 mm and depth of 10 mm.

To install the bumper it is necessary to carry out a machining of Ø5 mm and 10 mm deep, in this way the bumper is correctly embedded in the panel.