Luminaire LED Kraz USB rechargeable with motion sensor, Natural White light 4,000K, Plastic, Metallic Grey

5028625 / 8432393011370
Colour temperaturePowerPackagingFinishingSKU
Natural white 4.000 K1 W5 Unit
Silver painted
5028625

Product features

  • Low consumption LED technology.
  • Built-in movement sensor: keeps the light switched on while it detects movement and turns it off after 30 seconds when it stops detecting movement.
  • Sensor detecting range: 120°, 2 metres.
  • Wireless LED lamp: 850mAh lithium-polymer rechargeable battery which can be recharged via a 5V DC 1A mobile charger with a micro USB B type connector.
  • Range of 360 switching cycles per charge before the battery runs out.
  • Charging status LED indicator.
  • Assembly on the furniture surface via the screw-on base or with the adhesive magnet, and it can be extracted easily for recharging.
  • LED quantity: 9.
  • Colour temperature: Natural white (4.000K).
  • Luminous flux: 85 lm.
  • Power: 1W.
  • Beam angle: 160 degrees.
  • Protection class: IP20.

Components

1 rechargeable LED light , fixing screws and magnet

Rechargeable LED light with movement sensor made of plastic with metallic grey finish that is perfect for the interior lighting of home furniture or of transit areas: laundry room, garage, stairs, children bedroom, corridor, etc.

The built-in movement sensor, with a 2-metre-long detection range at a 120º angle, keeps the light switched on while it detects movement and turns off after 30 seconds when it stops detecting movement.

This luminaire works with an 850mAh lithium-polymer rechargeable battery. The charging time will vary depending on the amperage of the charger, although it is recommended to use 5V DC 1A chargers with a micro USB B type port, therefore the estimated charge time is 2 to 2,5 hours. It has a range of 360 switching cycles per charge before the battery runs out and it has an charging status LED indicator that goes from red to green when the charge is complete.

Surface mounted in the cabinet by screwing the base or by means of an adesive magnet (both included), so it can be extracted easily for recharging.

Product benefits

The Kraz LED luminaire is perfect for illuminating dark spaces thanks to its motion sensor and rechargeable battery operation.

For manufacturers, its compact design and autonomy of up to 360 cycles per charge make it ideal for portable lighting projects.

Wholesalers and distributors will appreciate its demand in the DIY and home sectors, with optimised presentation for large volumes.

Carpenters and small businesses will enjoy its easy installation with adhesive magnets or screws, adapting to any space.

Digital distributors will be able to market this luminaire in e-commerce as an innovative solution for lighting without electrical installation.

Documentation

Frequently asked questions


The integrated motion sensor detects motion within a range of 2 metres and at an angle of 120°. The luminaire automatically switches on when motion is detected and switches off after 30 seconds if no activity is detected.

The luminaire uses a rechargeable lithium polymer battery with a capacity of 850 mAh. The estimated charging time is 2 to 2.5 hours using a 5V DC 1A charger with micro USB type B connector.

The luminaire can be installed with screws on the surface of a piece of furniture or by means of an included adhesive magnet, allowing it to be easily removed for recharging. Both options are safe and practical.

The charge status LED indicates that the battery is charging when it is on. When the LED turns off, the battery is fully charged and ready for use.

This luminaire is ideal for transit areas such as corridors, wardrobes, laundry rooms or stairs, thanks to its compact design, natural white light (4000K) and motion sensor. Its simple installation and 360 cycles autonomy make it perfect for areas without direct access to electricity.

Yes, it is possible to recharge the Kraz light with a mobile phone charger. The charger needs to have a type B micro USB and should at least supply 5V DC.

The charging time will vary depending on the amperage of the charger. It is recommended to use 5V DC 1A chargers, therefore the estimated charge time is 2 to 2.5 hrs.

This light has a range of 360 switching cycles per charge before the battery runs out and it has an LED indicator that goes from red to green when the charge is complete following an approximate time of 2.5 hours.