Technical assistance

We want to clear the main technical questions that may arise about the operation of our products and the steps necessary for their assembly.

Feet

The maximum diameter that a table top or surface of a table can have with a Stay 5 or Stay 6 leg in order to avoid it toppling over when we support ourselves on one end is:\- 1,000 mm for the Stay 5 legs. \- 1,200 mm for the Stay 6 legs.

What is the maximum diameter of the table top surface of a table with Stay 5 or Stay 6 legs?

The maximum recommended tabletop that the board or table top with Duplo feet should have is 1.500 x 900 mm.

The maximum recommended tabletop that the board or table top with Hera feet should have is 900 x 900 mm.

The following diagram shows the detail of the machining that you need to carry out on the table top of a table in order to fasten the plate of the 60 - 80 feet.

What is that machining that I need to carry out on the table top of a table in order to fasten the plate of the 60 - 80 feet?

Yes, it is possible to cut the 80 feet. To do so, you need to cut the foot at the leveller part, once this part has been disassembled, and make the cut with a cutting disk/saw that is suitable.

In order to know if a nut is compatible with a leveller, we have to look at the internal thread of the nut and at the thread of the leveller, which must coincide.For example, if we choose a 4 metric screw thread (M4), the nut also has to have an internal metric thread of 4 (M4).

Given that the unit load of each wheel is 70 kg, the complete Slip Ø100 4-wheel kit will withstand a weight of 280 kg.

Subscribe to notifications
You're subscribed to notifications
You've blocked notifications
Click to subscribe to notifications
Thanks for subscribing!
You're subscribed to notifications
You won't receive notifications again
Manage Site Notifications
SUBSCRIBE
UNSUBSCRIBE
Unblock Notifications
Follow these instructions to allow notifications: